Issue when I upload CSV file for insert contact list on Cisco Attendant Console Advanced
Hi Friends,
I have error "Provided file is not valid CSV File" when I upload CSV file to Cisco Attendant Console Advanced system. I'm not sure what happen about my CSV. My purpose is insert contact list to system and create CSV base on documentation.
Anyone have idea to solve this issue please kindly help me.
Thanks
You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant
Similar Messages
-
Uploading CSV file for adding contacts
Is it possible to upload a csv file of my contacts to the contact on my storm? If so, how is that done?
install the Desktop Manager. you can download it from the software section of the Blackberry.com website.
take the one "without Media manager" and install it on your PC.
then after openingthe Desktop Manager :
first, do a backup of what's in your Blackberry Storm
then you can do a manual synchronization, just choose ascii file and follow the instructions.
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Upload csv file and insert into a table for user
Hello,
i want to create a Page on which, the User of my Application can upload a semicolon delimited file and the data of the file should automatically be stored in a table.
I can upload the file and the file is then stored in the htmldb_application_files table.
But I do not no how to parse the file....
Can anyone help me or is there anyone who have done that before?
Thank you,
TimTim...
Here is what I did in a similar situation.
Let the user download a csv file to use as an excel turnaround document.
I check digit the primary key. They are not supposed to touch that column.
They do their excel thing adding data in columns next to the ones they are updating. They now have the original and new data on the same row in the excel document. They save it on a share drive as a csv. A perl script wakes up and parses the csv. Verify's the check digit, checks that the old values still exist in the table... etc, and then does the update if all is well at the row level. The csv is replaced showing the success or failure of the update on each row.
Probably lots of other ways to accomplish this but I have gotten years of use out of the script. The original csv can come out of almost any application. Mine come from apex, discoverer and some excel queries.
Bob -
Issue when creating a CSV file
Stupid issue but I've tried to fix it all day and it's not working...
I need to create a CSV file made up of 3 columns, 2 number and 1 char. The char column is a company name that has spaces in it. When I run the query in SQL Developer, the char column looks fine. When I run in in BiPub as a CSV, I get double-quotes around the char column. It looks fine if I would look at it as DATA or any other format.
I can't use the REPLACE function because there's nothing wrong with the data.
We're using BI Pub v.10.1.3.4.
Any thoughts?
Thanks!!
KrisFirst I tried using a basic rtf file and just selected CSV as the type. Then I tried using the 'e-text template' and selecting CSV, same result. Now I'm trying to use an .xsl file instead of a .rtf to see if that works.
Kris -
Error while uploading .xml file for Customer/Vendor List for Italy
Hi All,
We are facing problem while uploading the .xml file in DMEE transaction for the new Customer/Vendor List for Italy.
We have followed the entire process given in the OSS Note(1090857).
We have SAP 4.6c and followed the below steps:
1. Created ID-FI-IT Development class
2. Added domains
3. Added Data elements
4. Tried to upload the given .xml file and got any error saying ".xml file could not be interpreted".
Also there is a .SAR file mentioned to upload if we receive any errors while uploading .xml file.
Tried uploading the .SAR file also. STill we are recieving the same Error.
Can any one of you help us out.
Thanks in Advance.
RameshOk, we upload .SAR file in this way:
1. unpack .SAR file with SAPCAR.EXE program. Yuo obtain 2 files
R492445.P9C and K492445.P9C
2. put K492445.P9C in directory \SAPMNT\TRANS\COFILES and put R492445.P9C in directory \SAPMNT\TRANS\DATA of your system (DEV, TST or PRD)
3. Use Tx STMS. If You want create DMEE tree in DEV system, go to DEV import queue. Choose menu Extras | Other requests | Add. Insert P9CK492445 in Transp. request field.
4. Import the request. This creates the DMEE tree. You don't need ti upload XML file after. You can see the DMEE tree created with Tx DMEE and inserting
Tree type UMS1
Format tree IT_CUST_VEN_LIST
5. after continue follow the note
I hope this help you
Roberto -
Need wild card command to export multiple csv files for software inventories list
I have a powershell script that does software inventories and then export into a csv file. now the problem is if i were to do this on multiple machine and point the path to a network share it will replace the olde csv file since the csv file has a same name
and i will end up having only one computer software inventories instead of multiple ones.
here's the string
Get-WmiObject win32_Product | Select Name,Version,PackageName,Installdate,Vendor | Sort InstallDate -Descending| Export-Csv P:\test\inventorries.csv
is there a way i can use a wild card to name these files in a sequential order? i have tried *.csv but no luck
How about adjusting the filename to include the machine hostname.
Get-WmiObject win32_product |Select Name,Version,PackageName,Installdate,Vendor | Sort InstallDate -Descending | Export-Csv -Path ('p:\test\inventory_' + (hostname) + '.csv') -
Issue when Opening a dwg file for conversion
"An unexpected error has occurred. PDFMaker quits silently when creating a PDF" is the error.
The dwg has been created by Archicad 15. Dwg's created by other apps work ok. Is there some content I need to remove from the dwg?
I can send the file if anyone thinks they can help.No good as layers don't come through. I didn't state this in my first post but that is the main requirement.
-
Upload csv files with infopackages
Hello,
I want to upload csv files for an infopackage in BW System and when i execute the infopackage, the system sends the error message "Role for scan virus /SCET/GUI_UPLOAD is not active".
Can anybody help me?
Thanks
Silvia MarquesHi Silvia,
You can check OSS note: 841387. Other relevant notes are :803637, 797108 and 807989.
Hope this helps... -
Error for the uploading csv file to database
Hi i tried to upload the csv file to database and i am getting error as
<cffile action="read" file="#data_dir_upload#/di_audit_corp_upc_ldr_tbl.csv" variable="di_audit_corp_upc_ldr_tbl">
<!--- loop through the CSV-TXT file on line breaks and insert into database --->
<cfloop index="index" list="#di_audit_corp_upc_ldr_tbl#" delimiters="#chr(10)##chr(13)#">
<cfquery datasource="#request.dsnCAO#">
<!--- SET ANSI_WARNINGS OFF --->
INSERT INTO [dbo].[di_audit_corp_upc_ldr_tbl]
( cpt_dpt_cd,cpt_com_cd,sub_com_cd,con_upc_no,pid_lng_dsc_tx,pid_sht_dsc_tx)
VALUES
(<cfqueryparam value='#left(trim(listgetAt('#index#',2,',')),2)#' cfsqltype="cf_sql_char">,
<cfqueryparam value='#left(trim(listgetAt('#index#',3,',')),3)#' cfsqltype="cf_sql_char">,
<cfqueryparam value='#left(trim(listgetAt('#index#',4,',')),5)#' cfsqltype="cf_sql_char">,
<cfqueryparam value='#left(trim(listgetAt('#index#',1,',')),13)#' cfsqltype="cf_sql_varchar">,
<cfqueryparam value='#left(trim(listgetAt('#index#',5,',')),25)#' cfsqltype="cf_sql_varchar">,
<cfqueryparam value='#left(trim(listgetAt('#index#',6,',')),12)#' cfsqltype="cf_sql_varchar">)
</cfquery>
</cfloop>
Error:
An error occurred while executing DTS package to import data.
Invalid list index 6.
In function ListGetAt(list, index [, delimiters]), the value of index, 6, is not a valid as the first argument (this list has 5 elements). Valid indexes are in the range 1 through the number of elements in the list.
i am unable to solve this issue can any one will help me to solve this issue
Thanks,
KiranI take it your are trying to use a csv file to insert new data into a database, using flex and coldfusion?
if so, then I would load the file in flex using cffile in ColdFusion and then use Load Data if you are using MySQL
This can show you more about it.
http://blog.tygate.com/?p=75
We get very large csv files ftp'd to us every week, and we have to load them in to the db. this works for us. -
Error: java.lang.OutOfMemoryError when uploading CSV files to web server
Hi experts,
I have made a JSP page from which clients load csv files to web server. I am using Tomca 4.1 as my web server and JDK 1.3.1_09.
The system works fine when uploadiing small csv files, but it crashes when uploading large CSV files.
It gives me the following error:
java.lang.OutOfMemoryError
<<no stack trace available>>
This is the code that I used to load files....
<%
String saveFile = "";
String contentType = request.getContentType();
if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0))
DataInputStream in = new DataInputStream(request.getInputStream());
int formDataLength = request.getContentLength();
byte dataBytes[] = new byte[formDataLength];
int byteRead = 0;
int totalBytesRead = 0;
while (totalBytesRead < formDataLength)
byteRead = in.read(dataBytes, totalBytesRead, formDataLength);
totalBytesRead += byteRead;
String file = new String(dataBytes);
saveFile = file.substring(file.indexOf("filename=\"") + 10);
saveFile = saveFile.substring(0, saveFile.indexOf("\n"));
saveFile = saveFile.substring(saveFile.lastIndexOf("\\") + 1,saveFile.indexOf("\""));
int lastIndex = contentType.lastIndexOf("=");
String boundary = contentType.substring(lastIndex + 1,contentType.length());
int pos;
pos = file.indexOf("filename=\"");
pos = file.indexOf("\n", pos) + 1;
pos = file.indexOf("\n", pos) + 1;
pos = file.indexOf("\n", pos) + 1;
int boundaryLocation = file.indexOf(boundary, pos) - 4;
int startPos = ((file.substring(0, pos)).getBytes()).length;
int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length;
String folder = "f:/Program Files/Apache Group/Tomcat 4.1/webapps/broadcast/file/";
//String folder = "10.28.12.58/bulksms/";
FileOutputStream fileOut = new FileOutputStream(folder + saveFile);
//out.print("Saved here: " + saveFile);
//fileOut.write(dataBytes);
fileOut.write(dataBytes, startPos, (endPos - startPos));
fileOut.flush();
fileOut.close();
out.println("File loaded successfully");
//f:/Program Files/Apache Group/Tomcat 4.1/webapps/sms/file/
%>
Please can anyone help me solve this problem for me...
Thanx...
DeepakI know it may be hard to throw away all this code, but consider using the jakarta fileupload component.
I think it would simplify your code down to
// Create a factory for disk-based file items
FileItemFactory factory = new DiskFileItemFactory();
// Create a new file upload handler
ServletFileUpload upload = new ServletFileUpload(factory);
// Parse the request
List /* FileItem */ items = upload.parseRequest(request);
// Process the uploaded items
Iterator iter = items.iterator();
while (iter.hasNext()) {
FileItem item = (FileItem) iter.next();
if (item.isFormField()) {
processFormField(item);
} else {
// item is a file. write it
File saveFolder = application.getRealPath("/file");
File uploadedFile = new File(saveFolder, item.getName());
item.write(uploadedFile);
}Most of this code was hijacked from http://jakarta.apache.org/commons/fileupload/using.html
Check it out. It will solve your memory problem by writing the file to disk temporarily if necessary.
Cheers,
evnafets -
I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated
Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail -
Sample CSV file for Master Schema Upload in CCM
Hi All,
Can some please send me a sample CSV file for Master Schema Upload in CCM to my ID <i>[email protected]</i>. Points will be awarded for the same
Regards
HariHi
Sent the same to your email id. )
Regards
- Atul -
Hello everyone.
I have a minor problem in uploading CSV file to HTMLDB.
I don't know the exact reason, but HTMLDB threw
"ORA-20001: Unable to create collection: ORA-06502: PL/SQL: numeric or value error" whenever I tried to upload my csv file. after a few repetition of deleting potential problem-causing columns and trying again, I found out the following:
when numeric value and character value are stored together in single column, the upload fails. For example, we have a column which stores the employee number. The employee number is just a sequential numeric value, however temporary employees have 'T' in front of their employee number, so it begins something like T0032 and so on.
So, then, I tried to enclose all the employee numbers which start with numeric value with " character, but that would just simply take too long to do it manually, and excel does not seem to support enclosing the values with " when it's saving the spreadsheet with CSV format.
So, I'm kind of stuck right now.
Can anyone give me a good way to deal it?
THANK YOU!Thanks for updating my forum setting, my name is now clearly visible :-)
anyway.. I went back and tested couple of things...
It now appears that the problem is not caused from values inside the column... instead..
I believe the size of csv file with certain character set is the issue here...
This is a rough estimate, but file size larger than about 31.7 ~ 9kb caused errors IF THEY CONTAINED OTHER CHARACTER SET THAN ENGLISH.
here are informations about my setting:
1. Oracle database: initially 9.2.0.1 -> patched upgrade to 9.2.0.4
2. HTMLDB: 1.4.0.00.21c (downloaded from otn)
3. db character set : UTF-8
4. OS: windows 2000 (with up-todate service pack and
security patches and etc..)
5. system: toshiba tecra 2100 with 1GB ram and 40GB hdd
6. operation system locale: korean, south korea
I tried uploading many other files in both english and korean, which is my national language. The english csv file worked beautifully, without any file size limitations. However, when I tried to upload a file with
KOREAN characters in it, it failed.
Intrigued by this behavior I started to test the file upload with various excel files, and found out that..
1. english csv files caused absolutely no errors.
2. engilsh file with single korean character immediately
threw the error, if the size exceeded 31.8kb (or I
think the size is 32kb)
3. I tested korean file mixed english file, caused
the same error if the size exceeded 32kb.
the distribution of korean characters inside the
csv file did not matter, just don't go beyond 32kb!
Please reproduce this behavior (but I presume that some efforts will be required in order to reproduce this error perfectly, since it is not easy to obtain foreign OS in US regions.. is it?)
anyway, thanks for your quick reply, and
I hope this problem gets fixed, because in this manner,
I have to split my file into 32kb chunks!
- Howard -
Uploading csv file into database using apex
Dear all
I am using apex 4 and oracle express 10g, i need to upload .csv file into the database for one of my appls, i have referred discussion forum for solutions, i found also, but some how its not working for me.
below mentioned is error and the code
ERROR:
ORA-06550: line 38, column 8: PLS-00221: 'V_DATA_ARRAY' is not a procedure or is undefined ORA-06550: line 38, column 8: PL/SQL: Statement ignored ORA-06550: line 39, column 8: PLS-00221: 'V_DATA_ARRAY' is not a procedure or is undefined ORA-06550: line 39, column 8: PL/SQL: Statement ignored ORA-06550: line 40, column 8: PLS-00221: 'V_DATA_ARRAY' is not a procedure or is undefined ORA-06550: line 40, column 8: PL/SQL: Statement ignored ORA-06550: line 41, column 8: PLS-00221: 'V_DATA_ARRAY' is not a proc
Error
OK
CODE:
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len number := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array wwv_flow_global.vc_arr2;
BEGIN
-- Read data from wwv_flow_files
select blob_content into v_blob_data
from wwv_flow_files where filename = 'DDNEW.csv';
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len ) LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
-- Convert comma to : to use wwv_flow_utilities
v_line := REPLACE (v_line, ',', ':');
-- Convert each column separated by : into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line);
-- Insert data into target table
EXECUTE IMMEDIATE 'insert into TABLE_X (v1, v2, v3, v4 ,v5, v6, v7,v8 ,v9, v10, v11)
values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)'
USING
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4);
v_data_array(5);
v_data_array(6);
v_data_array(7);
v_data_array(8);
v_data_array(9);
v_data_array(10);
v_data_array(11);
-- Clear out
v_line := NULL;
END IF;
END LOOP;
END;
what i understand from this is system does not identify v_data_array as array for some reasons, please help me.
initially system was giving error for hex_to_decimal, but i managed to get this function on discussion forum and now it seems to be ok. but v_data_array problem is still there.
thanks in advance
regards
UdayHi,
Mistakes in your sample I did correct
Problem 1
select blob_content into v_blob_data
from wwv_flow_files where filename = 'DDNEW.csv'; to
select blob_content into v_blob_data
from wwv_flow_files where name = :P1_FILE;Problem 2
EXECUTE IMMEDIATE 'insert into TABLE_X (v1, v2, v3, v4 ,v5, v6, v7,v8 ,v9, v10, v11)
values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)'
USING
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4);
v_data_array(5);
v_data_array(6);
v_data_array(7);
v_data_array(8);
v_data_array(9);
v_data_array(10);
v_data_array(11); to
EXECUTE IMMEDIATE 'insert into TABLE_X (v1, v2, v3, v4 ,v5, v6, v7,v8 ,v9, v10, v11)
values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)'
USING
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11); And I did create missing table
CREATE TABLE TABLE_X
v1 VARCHAR2(255),
v2 VARCHAR2(255),
v3 VARCHAR2(255),
v4 VARCHAR2(255),
v5 VARCHAR2(255),
v6 VARCHAR2(255),
v7 VARCHAR2(255),
v8 VARCHAR2(255),
v9 VARCHAR2(255),
v10 VARCHAR2(255),
v11 VARCHAR2(255)
);Regards,
Jari
Edited by: jarola on Nov 19, 2010 3:03 PM -
Upload csv file to sap in background
Dear Expert,
Please help me I want to record vendor data in background mode for this i used SHDB and has done recordings then i used gui_upload function in program and successfully uploaded CSV file without any error, then i have created session when i am running session with foreground or display error checkbox it is running correctly, as i want to run in background then i clicked on background checkbox for process it gives information message 1 session transferred to background processing but when i am checking log there it is showing trasaction read 0, transaction processed 0, transaction with error 0, transactions deleted 0.
Please tell me cant i upload csv file in background with this method?
Is it manadatory to use open datset, read data set for uploading file in background?Hello Sir,
During opening dataset it is opening only one record from excel file that is first row. It is not reading rest rows, I tried to used it like this...
do 10 times.
perform open_dataset using dataset.
read dataset dataset into record.
if sy-subrc <> 0.
exit.
endif.
append record.
enddo.
First time it reads first row second time at open_dataset it is giving dump given below.
The file "D:\vendor.csv" is already open.
What happened?
Error in ABAP application program.
The current ABAP program "ZNEWTEST" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Please resolve my problem....
Maybe you are looking for
-
Problem with 10.6.8 install after migration
moved from a 2010 iMac to a 2011 MacBook Pro... have Lion / Snow Leopard partition as the music software i use is still best on SL (10.6.8) so when i got the new machine with Lion installed i partitioned the HD, installed 10.6.8. on the partition the
-
N95 - no text appears in web browser
When I connect to the Internet through my N95 WiFi connection, I get the images but not the text on the web pages. Even when I write something (like user name and password) I cannot see what I am writing. Will be thankful if someone would give me a s
-
Ver 7.0.1 wont support frames.
I upgraded to ver. 7.0.1 and on certain sites its blank and when I right click view page source, it tells me that the browser doesn't support frames. Here's a copy and paste. <noframes><h2>Your browser does not support frames. We recommend upgrading
-
Is there any way you can import model views into Acrobat 3D? I ask because, the model view functionality within Acrobat 3D is fairly limited, in that you can't move/rotate parts within a model and save it as a model view. I haven't found a way in Too
-
Hi Sir/Madam, Is there any CISCO ASR 9000 best practices document for installation and configuration? Best Regards Saikat Chakraborty