Issue when SelectOneChoice is used with Domain data type in JDev 11.1.2.0.0

Hi,
I am facing one issue while working with SelectOneChoice along with Custom Domain data type. Sample app to simulate the issue is available at http://www.filejumbo.com/Download/6FDF6ECF2922BD24
Issue Details.
Base view object’s attribute is of type CustomString, for which another static VO’s attribute is attached as LOV. LOV attribute is of type String. Because of this data type mismatch between LOV VO attribute and Base VO attribute, while working in screen, initially we were facing Class cast exception.
Cannot convert <<LOV Attr. Val.>> of type class java.lang.String to class model.domain.common.CustomString This is not only for this type of SelectOneChoice but also for InputText field whose underlying VO attribute is of type CustomString (i.e. any Custom Domain type)
On raising this in Jdeveloper forum, I came to know that adding a default oracle converter against the UI Component will take care of converting to respective data type. After added the converter for InputText and SelectOneChoice components, this issue got resolved. This was our lesson while working in Jdeveloper version 11.1.1.3.0. Converter we used,
<f:converter converterId="oracle.genericDomain"/> When we try the same scenario in Jdev Version 11.1.1.4.0, without having the oracle converter itself, SelectOneChoice started working fine!! (i.e. it is able to set the base attribute with LOV attribute’s value but with proper base attribute’s domain data type). Anyhow, converter is required for InputText.
When we try the same scenario in Jdeveloper new version 11.1.2.0.0, it started giving class cast exception when we don’t have oracle converter for SelectOneChoice. But by adding it, though it didn’t give such class cast exception message, though a selection is made in SelectOneChoice, VO attribute has not been updated with the new value. Instead it is updated with null value (Checked the setter method of view row impl by having break point) . Because of this, after a selection is made, when we try to read the attribute value from VO on button click, VO attribute always returns null.
We have also tried our own converters but there is no change in the behavior.
The above misbehavior can be tested either by having SOP programmatically or by refreshing the SelectOneChoice by giving its id as Partial trigger to itself with autosubmit set to true, so that the selected value will be reset to null irrespective of the selection made.
For convenience, Issue details with Sample application is shared. Shared link : http://www.filejumbo.com/Download/6FDF6ECF2922BD24
Shared folder contains
1. Sample App developed on Jdev 11.1.1.4.0 to ensure it didn’t give this error.
2. Sample App developed on Jdev 11.1.2.0.0 to simulate this error.
3. Error details in a document.
Can anybody have a look at this and tell me why this misbehavior and is it a bug? If so, any workaround available to continue the development?
Thanks in Advance.
Raghu
Edited by: Raguraman on Sep 10, 2011 10:31 AM

Sorry for the late reply John and Frank. Ya i did. Thank you.
One more detail:
I tested the behavior in Jdeveloper 11.1.2.0.0. The recent surprise is Select One Choice is behaving perfectly when it used in Grid layout and fail to work when it is form layout. I am getting surprised why behavior of component varies based on the way it refers the binding.
for form layout,
value=#{bindings.
for grid layout,
value=#{row.bindings.
The bug details (#/title) are Bug 12968871 - RUNTIME CONVERSION FAILURE WHEN USING CUSTOM DOMAIN OBJECT VALIDATION IN EO
Edited by: Raguraman on Sep 12, 2011 8:23 PM
Edited by: Raguraman on Sep 12, 2011 8:31 PM

Similar Messages

Error ORA-01426: numeric overflow when Creating table with double data type

Hi,
I am using ODP.NET to create a table with data from SQL to Oracle. The problem is with double data type fields that is equivalent to FLOAT(49) in Oracle. My syntax is:
CREATE TABLE SCOTT.ALLTYPES
F1 NUMBER(10),
F10 DATE,
F2 NUMBER(10),
F3 NUMBER(5),
F4 NUMBER(3),
F5 FLOAT(23),
F6 FLOAT(49),
F7 NUMBER (38,5),
F8 NVARCHAR2(500),
F9 NVARCHAR2(500)
Th error is with field F6 but I am not sure what is the correct type equivalent to double in SQL.
I woul appreciate if anyone can help me with this problem.
Sunny

Does this simple test work for you?
In database:
create table float_test
f1 float(49)
);C# code:
using System;
using System.Data;
using System.Text;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
namespace FloatTest
/// <summary>
/// Summary description for Class1.
/// </summary>
class Class1
    /// <summary>
    /// The main entry point for the application.
    /// </summary>
    [STAThread]
    static void Main(string[] args)
      // connect to local db using o/s authenticated account
      OracleConnection con = new OracleConnection("User Id=/");
      con.Open();
      // will hold the value to insert
      StringBuilder sbValue = new StringBuilder();
      // create a string of 49 number 9's
      for (int i = 0; i < 49; i++)
        sbValue.Append("9");
      // command object to perform the insert
      OracleCommand cmd = con.CreateCommand();
      cmd.CommandText = "insert into float_test values (:1)";
      // bind variable for the value to be inserted
      OracleParameter p_value = new OracleParameter();
      p_value.OracleDbType = OracleDbType.Double;
      p_value.Value = Convert.ToDouble(sbValue.ToString());
      // add parameter to collection
      cmd.Parameters.Add(p_value);
      // execute the insert operation
      cmd.ExecuteNonQuery();
      // clean up
      p_value.Dispose();
      cmd.Dispose();
      con.Dispose();
}SQL*Plus after executing above code:
SQL> select * from float_test;
        F1
1.0000E+49
1 row selected.- Mark

I have recently purchased an Iphone 4s white 16GB. When camera is used with a flash the picture is white and hazzy. Anyone with the same problem?

I have recently purchased an Iphone 4s white 16GB. When camera is used with a flash the picture is white and hazzy. Anyone with the same problem?

Yep. Exchanged for black and that solved it. Too much light leaks through the glass on the white phone.

Help with Multi point chart plot hile using the waveform data type..

Currently I have two channels being transfered into the AI C-Scan block (by means of a build array) in hopes to display the outputs on a chart as well as an output file. As an outout I am using the waveform data type, as I hear this is the way to go. Problem is that I have the the Waveform chart directly connected to the waveform out put the the AI C-SCAN block but nothing is being displayed on the chart. Although the time is updated on the chart it is listed as the year 1903. I do have data these channels as the there are digital outputs for these channels. Perhaps I should use the AI CONFIG and AI READ clocks rather than this AI C-SCAN. Any ideas...

Christian,
Please see the Real-Time Chart shipping example for LabVIEW. This example describes how to set the base time of the chart so that the time and date are correct.
You may want to autoscale the Y-axis as your data may be out of range of your chart and that is why nothing is seen.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How to insert data in a column with uniqueidefier data type

Guys,
I need insert data in a column with uniqueidefier data type, when i am trying to that getting error.
error message says: "Conversion failed when converting from a character string to uniqueidentifier."
I have data in table a col1,col2,col3,col4 - col3,col4 has datatype as varchar and i am updating table b columns col1,col2 with table a col3 and col4.
Please guide how to do it.

Hi,
Not any String can be convert to uniqueidentifier.
1. you have to make sure u use a value which is fir to be uniqueidentifier
2. Use convert or cast in the insert query in order to convert the string into uniqueidentifier
insert X ... convert(uniqueidentifier, 'string which fit to be convert to uniqueidentifier')
Please post DDL+DML for more specific help
DDL = Data Definition Language. In our case that is, CREATE TABLE statements for your tables and other definitions that are needed to understand your tables structure and there for let us to test and reproduce the problem in our server. Without DDL no one
can execute any query.
How to get DDL: Right click on the table in Object Explorer and select script table as CREATE. Post these create table scripts here.
DML = data manipulation language is a family of queries used for manipulating the data it self like: inserting, deleting and updating data. In our case we need some sample data in order to check the query and get result, so we need some indert query for
sample data.
If you post a "create query" for the tables and "insert query" with some sample, then we could help you without Assuming/Guessing. There is a reason that DDL is generally asked for and expected when discussing query problems - it helps
to identify issues, clarify terminology and prevent incorrect assumptions. Sample data also provides a common point of reference for the discussion. A script that can be used to illustrate or reproduce the issue you have, will encourage others to help.
[Personal Site] [Blog] [Facebook]

Same Input name with different data type cause the reflection exception

I have a proxy contains couple RFCs. Two RFCs contain an argument named IN_COMPANY_CODE with data type of ZTRE_FX_BUKRSTable. Another RFC contains the same argument name of IN_COMPANY_CODE but hold different data type (String). All RFCs are in the same proxy. Complie and build the application with no issue.
But when I ran the RFC, it generates the reflection exception below:
Method SAPProxy1.Z_F_Tre_R_Pre_Trade_Fx can not be reflected. --> There was an error reflecting 'In_Company_Code'. > The XML element named 'IN_5fCOMPANY_--5fCODE' from namespace '' references distinct types System.String and MSTRFOREX.ZTRE_FX_BUKRSTable. Use XML attributes to specify another XML name or namespace for the element or types.
I realize the conflict introduced by the same name with difference data type. But I would like to know if this is fixable as a bug or if there is any best practice and/or some manual intervention to make it work.

Please install fix from OSS note 506603. After this, right-click .sapwsdl file and select "Run custom tool".

Working with complex data types in web services ...

Hi All,
I have created a webservice and created an interface for that in ADF. Now as my web service returns a complex data type, i followed the steps given in this article "http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html" and it works fine, my results also get displayed. But only issue is i get a warning "JBO-25009: Cannot create an object of type:java.util.calendar with value:2008-09-23T23:51:30.000+05:30" and if i replace all the java.util.Date with oracle.jbo.domain.Date then i get a warning "JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value:2008-09-23T23:51:30.000+05:30". Now i am unable to understand this although i believe it is a data type mapping issue, but not sure how to rectify it.
Anybody knows the wayout?
Regards
Lokesh

Andre,
Thanks for youe response. I also tried makeing data type as string in place of date in data control.xml and it worked fine. So it confirms that i am facing with exactly similar issue as yours.
I tried solution 2 mentioned in Frank's mail but its not helping[in fact i am already using web proxy as i am delaing with complex data types]. I created a web proxy and in java bean i placed break points to check the control flow[in order to check the root cause] but control never reaches the java bean!! I am not sure about the cause for it...control should pass through java bean isn't it??
I am quite new to SOA...so can somebody just elaborate on how to rectify this using web proxy. I have been using this rl "http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html" to work with web proxies" to work with proxies.
Regards
Lokesh

Use of segment, data-type or segment not supported in this position

A message sent to adapter "FILE" on send port "SendPort1" with URI "D:\Shared Files\Coparn\%MessageID%.xml" is suspended.
Error details: Unable to read the stream produced by the pipeline.
Details: Error: 1 (Segment level error)
SegmentID: TDT
Position in TS: 2
15: Use of segment, data-type or segment not supported in this position.
Im getting the error while trying to generate COPARN EDI file using BizTalk.
When I checked all the elements are occurring in the correct positions with accepted values only. Kindly assist.
Regards, Vivin.

There seems problem with your Pipeline component ,I would suggest to debug the Pipeline component to verify the exact issue you are facing.
There is similiar thread for thsi issue which can provide you the guidance .
http://social.msdn.microsoft.com/Forums/en-US/f80c870c-a4f9-4d65-9d3c-d43d7f060557/biztalk-console-error-message-unable-to-read-the-stream-produced-by-the-pipeline?forum=biztalkediandas2
Thanks
Abhishek

DBMS_LOB.SUBSTR with NCLOB data type

Hi ,
When I am trying to extract part of the string from Comments column(NCLOB datatype) am facing issue.
ORA-06502:PL/SQL Numeric or value error :Character string buffer too small
select dbms_lob.substr(a.COMMENTS, 4000, 1),
from VW_DETAILS a
where a.id = 6210872
DBMS_LOB.SUBSTR with NCLOB data type
Table structure :
Column_name Data_type
Comments NCLOB
ID NUMBER
Regards,
Venkat

DBMS_LOB.SUBSTR parameter amount for CLOB/NCLOB indicates number of characters to substring, not bytes. And 4000 multi-byte characters (since you are using NCLOB) is greater than 4000 bytes which is absolute limit for VARCHAR2 in SQL.
SY.

ORA-19007 when coping a table with an xml type in it to a new schema in the

ORA-19007 when coping a table with an xml type in it to a new schema in the same database.
Hi all,
When I copy a table with an xml type in it to a new schema in the same database I get an ora-19009.
The setup is as follows I have a schema a with table TABLE_WITH_XMLTYPE where data is:
CREATE
TABLE TABLE_WITH_XMLTYPE
FOLDER_ID NUMBER (10, 0) NOT NULL,
SEARCH_PROPERTIES XMLTYPE ,
CONSTRAINT TABLE_WITH_XMLTYPE PK PRIMARY KEY (FOLDERID) USING INDEX
XMLTYPE COLUMN SEARCH_PROPERTIES XMLSCHEMA
"http://xxxxxxx.net/FolderProperties.xsd" element "FolderProperties"
VARRAY SEARCH_PROPERTIES."XMLDATA"."PROPERTIES"."PROPERTY" STORE AS TABLE
PROPERTY_TABLE
(PRIMARY KEY (NESTED_TABLE_ID, ARRAY_INDEX)) ORGANIZATION INDEX OVERFLOW
Both schemas have the following xml schema registered as a local xml schema
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'http://xxxxxxx.net/FolderProperties.xsd',
SCHEMADOC =>
'<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb"
xdb:storeVarrayAsTable="true">
<xs:element name="FolderProperties"
type="FolderPropertiesType"
xdb:defaultTable="FOLDER_SEARCH_PROPERTIES" />
<xs:complexType name="FolderPropertiesType" xdb:SQLType="FOLDERPROPERTIES_T">
<xs:sequence>
<xs:element name="FolderID" type="FolderIDType" minOccurs="1" xdb:SQLName="FOLDER_ID"/>
<xs:element name="Properties" type="PropertiesType" xdb:SQLName="PROPERTIES"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertiesType" xdb:SQLType="PROPERTIES_T">
<xs:sequence>
<xs:element name="Property" type="PropertyType" maxOccurs="unbounded"
xdb:SQLName="PROPERTY" xdb:SQLCollType="PROPERTY_V"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertyType" xdb:SQLType="PROPERTY_T">
<xs:sequence>
<xs:element name="DateValue" type="DateType" xdb:SQLName="DATE_VALUE"/>
<xs:element name="NumValue" type="NumType" xdb:SQLName="NUM_VALUE"/>
<xs:element name="StringValue" type="StringType" xdb:SQLName="STRING_VALUE"/>
</xs:sequence>
<xs:attribute name="Name" xdb:SQLName="NAME" xdb:SQLType="VARCHAR2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="255"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:complexType>
<xs:simpleType name="FolderIDType">
<xs:restriction base="xs:integer"/>
</xs:simpleType>
<xs:simpleType name="DateType">
<xs:restriction base="xs:dateTime"/>
</xs:simpleType>
<xs:simpleType name="NumType">
<xs:restriction base="xs:decimal"/>
</xs:simpleType>
<xs:simpleType name="StringType">
<xs:restriction base="xs:string" />
</xs:simpleType>
</xs:schema>',
LOCAL => TRUE,
GENTYPES => TRUE,
GENTABLES => FALSE);
END;
when I try to do the following insert:
insert into schemaB.TABLE_WITH_XMLTYPE ( FOLDER_ID, SEARCH_PROPERTIES)
select FOLDER_ID, SEARCH_PROPERTIES from schemaB.TABLE_WITH_XMLTYPE;
I’ll get an ora-19007.
Can some one point me in the right direction how to solve this error.
Thanks Roelof.

Who did you create the second table, in other words, how did you COPY the table as you said...
If you created the second table via a CTAS (create table as select) then you will have created a table that is not the same as the original one. AFAIK I have once created an enhancement request for this after discovering that JDeveloper, for example, creates a "copy" via a CTAS which creates the wrong structure. Double check via package DBMS_METADATA.
SQL> set long 1000000
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaA') from dual;
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaB') from dual;If you have got two different tables, than Mark's solution should help.
M.
Edited by: Marco Gralike on Feb 15, 2009 11:16 AM

JDBC insert with XMLTYPE data type

Hi,
SOAP to JDBC scenario. Oracle 11G as a receiver.
Requirement is to insert whole xml payload message in one of Oracle table fields as a xml string. Target oracle DB table column is defined with XMLTYPE data type, it has capacity to hold xml data more than 4GB. I am using graphical mapping with direct INSERT statement.
When I try to insert xml payload with smaller size transaction goes through. However when the xml payload size increases it is giving following error in JDBC receiver communication channel monitoring.
Could not execute statement for table/stored proc. "TABLE_NAME" (structure "StructName") due to java.sql.SQLException: ORA-01704: string literal too long
Here is insert statement as in communication channel monitoring. (Note: XML payload with bold characters is truncated)
INSERT INTO TABLE_NAME (REQ_ID, OUTAGE_OBJ, TIMESTAMP, PROCESSED_FLAG) VALUES (VAL1, <?xml version="1.0" encoding="UTF-8"?>............</>, TO_DATE(2010-11-15 10:21:52,YYYY-MM-DD HH24:MI:SS), N)
Any suggestions to handle this requirement?
Thank you in advance.
Anand More.

Hi Anand,
The problem here is definitely the length of the SQL query. i.e "INSERT INTO ......... VALUES......."
This is what i got when i searched for this ORACLE error code:
ORA-01704: string literal too long
Cause: The string literal is longer than 4000 characters.
Action: Use a string literal of at most 4000 characters. Longer values may only be entered using bind variables.
Please ask a ORACLE DB expert on how to handle this Also i am not sure how can we handle Bind Varibales in SAP PI.
I hope this helps.
Regards, Gaurav.

The data type of the variant is not compatible with the data type wired to the type input.

Hello all..
Iam curently struggling with the following:
On my main(top)_VI, I have a mix-signal graph which will output several or one signals depending on the user. I also have an inner subvi which has the analisys i want to give the the data before outputing it to the main(top) VI, which has the mix-signal graph control.
Now, I created a reference from the mix-signal graph and Iam imputing this reference into the subVI (which inside has a property node type_control_mix-signal graph in which Iam connecting the refnum from the top VI to view the output data). The data consists of an array of clusters of 2 arrays of doubles each.
-- let say I create the property node type control mix-signal graph and i choose value property; it lets me put the array of clusters of 2 arrays of doubles each without problems; Now the second I connect the refnum pointing to the mix-signal graph on the Main_VI it brakes the cables and only accepts one cluster of two arrays os doubles instead.
--if on the other hand I connect the refnum to the property node type_control_mix-signal graph before connecting the imput it doesnt complain until I run the VI where it gives the error 91.
I have also notices a (strict) parenthisis at the end of the property node sometimes. [what does this (strict) means?]
FInally if instead of creating the refnum from the Main_VI, I create either a xy graph or a mix-signal praph it lets me connect the an array of clusters of 2 arrays of doubles each without any problem. The refnum connection seems to be the problematic factor, but by the same tolken I dont know any other means of sending that data from the inner to the outter VI.
I have the feeling Iam missing on one or more Labview fundamentals regarding refnums.
Any help will be apreciated

You almost found it on your own. The refnum needs to be 'strict', that means that the data type of the graph is set (2D dbl), otherwise it will use the default data type. To do this you create the refnum directly from the graph after you have wired the correct data type to the terminal. In this case the refnum wire will break if you change the data type of the graph.
Independend of this issue, I suggest you not to use the value property on the graph but directly wire the data (e.g. the 2D double) to the SubVI. The property value is by far the slowest way to get data, and 2D arrays are really some amount of data.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Check box with Boolean data type is not behaving properly

Hi,
I create a sample application with one entity driven view object with two attributes. One is of String data type [Value will be Y/N] and another (transient) attribute with Boolean data type. I planned to bind this boolean data type attribute to UI. I overridded the view row impl class and included setting of boolean attribute inside the setter of String attribute. Also in the getter of boolean attribute, added code to check the string attribute and return true/false based on that. Everything is working fine in application module tester. But when i test the same in view controller project in a page, it is not working. Always Check box component is not checked eventhough when i explicitly check it.
[NOTE: I have given the control hint of Boolean attribute as check_box. Also i don't want selected/unselected entries in the page def file. That's why followed this approach]
Have i missed out anything? Why this behaviour.
Thanks in advance.
Raguraman

what is the value that is going in when u check it.. did u debug it.. is the viewRowimps setter and getter getting called.. and is it having the right value set and got.. and ur sure that ur using selectBooleanCheckBox..
ur binding the checkbox to the transient value right??

Problems with Memo data type in access

I have a Java program which is connected to a Microsoft Access Database. When trying to get a Memo data type field out of the DB and putting it into a StringBuffer, it causes a Function sequence error, even though it does put the field into the said StringBuffer.
For all other data types, like text (string), long integer etc there is no error but only for a memo field.
What's the best way to get a memo field out of an Access DB without it causing problems? or should i just forget Microsoft's Access and make my DB in Oracle?

Hi! Can you tell me how connect a java program with a Microsoft access DB? Should I have to use a particular driver? Where I can find it?
thank you vcery much for your help!!

Creating Web service for PL/SQL Procedure with Complex Data Types

I need to created web service for PL/SQL Procedure with Complex Data types like table of records as parameters, how do we map the pl/sql table type parameters with web service, how to go about these?

Hello,
When you are creating a service from a Stored Procedure, the OracleAS WS tools will create necessary Java and PL wrapper code to handle the complex types (table of record) properly and make them compatible with XML format for SOAP messages.
So what you should do is to use JDeveloper or WSA command line, to create a service from your store procedure and you will see that most of the work will be done for you.
You can find more information in the:
- Developing Web Services that Expose Database Resources
chapter of the Web Service Developer's guide.
Regards
Tugdual Grall

Issue when SelectOneChoice is used with Domain data type in JDev 11.1.2.0.0

Similar Messages

Maybe you are looking for