Issue while assigning the user quota to tablespace
Hi,
I am trying to assign 11000m quota to user CIMGRPT on DATA tablespace
once I entered the alter command is showing user alterd but while checking the quota its showing 0bytes.
please echeck the below query and sugeest accordingly.
SQL> select username from dba_users where default_tablespace='DATA';
USERNAME
CIMGRPT
HPCMSASRPT
DETEST
SQL> alter user CIMGRPT quota 11000M on DATA;
User altered.
SQL> select bytes/1024/1024,tablespace_name from dba_ts_quotas where username='C
IMGRPT';
BYTES/1024/1024 TABLESPACE_NAME
0 DATA
SQL> select bytes/1024/1024 from dba_data_files where tablespace_name='DATA';
BYTES/1024/1024
63127
63127
63127
63127
63127
63127
6 rows selected.
Regards,
Edited by: user9945534 on Mar 11, 2009 12:54 AM
sorry, I don't understand your question.
select bytes/1024/1024 as USED, MAX_BYTES , tablespace_name from dba_ts_quotas where username='C';
use MAX_BYTES to find Quota and bytes=usedIdea:
alter user scott quota 100M on TBS_T;
select bytes/1024/1024 as USED, MAX_BYTES/1024/1024 as MAX, tablespace_name from dba_ts_quotas where username='SCOTT';
USED MAX TABLESPACE_NAME
0 100 TBS_T
Similar Messages
-
Error while assigning the user to orgunit and position
Hi,
We are having the below issue :
1. Obtain the HR master record (P Ids) created by interface - ECC
2. Assign a valid user to this HR master record -ECC
3. Do the position/Org assignment against this P Id or personnel master record - ECC
4. Transfer the Org Id, then the position ID and then the personnel master ID (P Id) to SRM u2013 ECC
5. Check if the user is in SYNC in SRM - Ideally he should inherit the mandatory parameters from the above Orgs in the structure without which he shall not be able to shop in SRM u2013 step executed in SRM
Please let us know if this process is as per the expectation.
If so, we are ending up with error in the third step where the assignment is not allowed since the personnel master record is created with prior date than the position and the Org units.
Actually we are getting the idoc with user alone from other system, org and position ids are blank. So we are assigning the user in the system and we are getting above error.
Is this the correct process to bring the users alone into the system and doing the position/organization assignment in ECC now?
Or the Idoc comes with this data as well?
Regards
Venkatesh P
Edited by: Venkatesh Padarti on Mar 5, 2012 5:33 AMThank you vikas for your reply.
So we should bring all the data in the idoc(O,S,P). Even though O, S are present in the receiving sytem?
Regards
Venkatesh P -
Issue while posting the invoice in background using the WF-BATCH user
Hi Friends,
I am facing an issue while posting the invoice in background using the WF-BATCH user. I am using a invoice approval workflow where in when the approver approvers the invoice the invoice document get posted using a background method, which uses BO FIPP and Method POST and i am returning the Message Text to my workflow container from this method. When i see the log an exception is rasied from this method with an error message "V004: You are not authorized to change this document", but WF-BATCH is having SAP_ALL and SAP_NEW authorizations. If i try to post the invoice using the method from my user id it is getting posted. What could be the issue. Please advice.Hi Sapient,
The Parameter, Roles would be different for the LOGIN USER and WF-BATCH.. So ask your administrator
to set the Roles & Parameters similar to that of LOGIN USER to WF-BATCH.
For further refrence check in SU01 giving the LOGIN USER and then check with WF-BATCH... you would
find the difference...
Hope this would help you..
Good luck
Narin -
Authorization issue while opening the query in Bex Analyzer
Hi All,
I get the below error mesage while executing a report.I have executed the same query in RSRT and i get the below message.
I have created some roles and added to a test user for testing purpose and when i log in as a tets user i get the below meesage.
I am not sure what i am missing in the roles.When i tried executing the query in my id then no issues.
No authority for the node from characteristic 0EMPLOYEE__0MAST_CCTR, hier
Your user master record is not sufficiently maintained for object Authori
Kindly let me how to overcome this.
Thanks in advance.
Regards,
KumarHi Harish,
Just check this query by this way:
Use Tcode RSECADMIN -> Analysis ->Execution as -> In Execute as user: Put your Test user Id also tick With log and select RSRT. Now use Start Transaction.
Might be the chance to get more details about this issue for resolution.
Also ensure, Have you did the User Comparison while assigning test user id in role?
Regards,
Abdullah -
Getting an error while adding the user in Sharepoint foundation 2010 environment.
Hi,
I am having full control access to SharePoint site. Then i tried add user for that site.
But i am getting following error while adding the user to the site.
An unexpected error has occurred.
Troubleshoot issues with microsoft SharePoint Foundation.
Correlation ID:3035B777-1B7C-4463-B35E-06657B72C2E4
Can you please help me anyone on this.
Thanks,
AshokThis could be any one of a number of things. You need to lookup the Correlation ID in the ULS logs on the SharePoint server. That should provide the additional information necessary to diagnose and solve the problem. Here's a blog post
on how to find the error.
http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.UvEuffldWik
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
WWC-00000 error while creating the user
Any one can help me on the WWC-00000 error while creating the
user from the Admin tab of Oralce Portal. In fact I can't use
the Login server administration. same problem exists.
I granted DBA privileges to the PORTAL30, just to verify and NO
use.
I am using the latest version of Portal S/W on iAS9i 1.0.2.2.1
- SuneelHi Suresh,
This error trace is not sufficient to understand the issue and at what step you got this error.
First tell me, did you got the User Admin Tab in your portal access. if yes.. did you got the next step...which is Identity Management. Please elaborate when did you got this error (i mean at what step) after that only we can give it a try.
Thanks,
Vinod -
Error occured while saving the user account information
I'm trying to install LiveCycle ES 2 with PDF Generator on a Windows 2008 server wtih SQL Server 2005. When I run the configuration manager I get an error in the step where you add the administrator user credentials for generator. The error I'm receiving is ALC-PDG-080-032-Error occured while saving the user account information. Has anyone seen this issue before? Any ideas on what the problem may be?
Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
Good luck, and please report your findings,
Hunt -
Performance issue while opening the report
HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande -
T.Code for issues return by the user after month closing
Dear SAPient's,
Give us the transaction facility available in SAP to account the issues
return by the user after month closing.
regards,
Bijay JhaDear SAPient's,
Actually I want to know that when the Goods Issued and from that some goods are returned back due to any reason.
I want to know Is there any T.Code from which i can get full details of Goods which is returned after Issuing in one month.
Warm Regards,
Bijay Kumar Jha -
Unable to assign the user in user group through SQ03
Hi All,
When I tried to assign a user to one user group from SQ03 the tick mark is disables can't assign the user.
This is happening only to one of the employee only. Others i can mark tick.
Please advice.
ImranHi
Please check if the user has authorization to that query....
For example if the user is a PA administrator & you are trying to assign this user to a user group which is Time Management ( Time Infosets), then the tick will be disabled.
This case was encountered in our firm too.
Please check & revert.
Regards,
Megha -
Error in Inter company Billing while assigning the Sales line to supplying
Dear All Concern,
While I was doing Inter company I am getting error at the time of assignment of sales organization, Distribution channel and Plant
Error: VT343
May organization is like this
Ordering Supplying
Company Code C1110 C1120
Sales org C1110 C1120
Distribution channel DS D1
Division AH A1
Plant C1110 C1120
While assigning the Order sales Line to the Supplying Plant I am getting this error
Please try to help me.Refer to this document and let me know whether its helpful . Make corrections accordingly
http://help.sap.com/saphelp_470/helpdata/en/dd/5614e7545a11d1a7020000e829fd11/content.htm -
Error while importing the user Records through SCC7
Hi Basis Gurus,
We are doing the post DB Refresh Activities for a Sandbox .
Refresh is done from D21 to S21.
We are stuckup with an error while importing the user Records(scc7).
The exported user records request from D21 is dumped in the trans directory of S38 and imported in to S21 using TP commands at O/S level. The import is done successfully( RC 4 with warnings).
But now when we run SCC7 (post import activities) in the background the process is getting cancelled right in the begining.
Error Occured in SCC3 log
Table logging disabled in program RSCLXCOP by user SAP*"
R/3 Version is 4.6C OS:AIX5.3
Your suggestions will be highly appreciated.
Regards,
SitaramHey Sitaram,
I looks like you have incorrect parameters of client copy in the S21 system.
You can change the parameters in S21 system,
by executing report RSCLXCOP (via transaction SE38 or SA38) in S21.
Search parameters that related to table logging/sap*
good luck! -
Getting Duplicate Object existing issue while deploying the BIAR file
Hi All,
We are trying to deploy BIAR File with XI R2 Command tool InstallEntSdkWrapper. But we are getting Duplicate Object exixting issue while deploying the BIAR file.
Error Message:
[report] [InstallEntSdkWrapper.main] Connecting to CMS plmdevapp31:6400 as administrator
[report] [InstallEntSdkWrapper.CmsImportFile] Exception: An error occurred at the server :
[report] Failed to commit objects to server : Duplicate object name in the same folder.
[report]
[report] [InstallEntSdkWrapper.main] BIAR File could not be imported
If we are doing any promition with Import Wizard we have an option to "Overwrite object contents" option to overwite exixting objects. It will very helpful if any one suggest how we can achieve this through InstallEntSdkWrapper.
Unfortunately there is no documentation availabe on InstallEntSdkWrapper.
Cheers!That's a limitation with the XI Release 2 InstallEntSdkWrapper.jar tool.
Sincerely,
Ted Ueda -
Get Error while update the User defined row table through DSK Code
Hi experts,
I have got an error while updating the user row defined table.
Error is - "Invalid row"
I have created one master table "@CBF_FARM " and Child table "@CBF_FAR1"
First i inserted 5 record in the child table so in my my child table there are 5 Line id (1,2,3,4,5 one for each row).
after that i delete 2 rows (3rd & 4th row) from child table now in my child table there are 3 rows( Line id 1, 2, 5). Please See attachment.
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
Following Code used for updating the user defined child table.
SAPbobsCOM.GeneralService oGeneralService1 = null;
SAPbobsCOM.GeneralData oGeneralData1 = null;
SAPbobsCOM.GeneralDataParams oGeneralParams1 = null;
SAPbobsCOM.CompanyService sCmp1 = null;
SAPbobsCOM.GeneralData oChild1 = null;
SAPbobsCOM.GeneralDataCollection oChildren1 = null;
sCmp1 = clsAddOn.LDNA_Company.GetCompanyService();
oGeneralService1 = sCmp1.GetGeneralService("CBF_FARM");
// Get UDO record
oGeneralParams1 = ((SAPbobsCOM.GeneralDataParams)(oGeneralService1.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)));
oGeneralParams1.SetProperty("Code", oForm.Items.Item("edtFarmCd").Specific.Value);
oGeneralData1 = oGeneralService1.GetByParams(oGeneralParams1);
// Add lines on UDO Child Table
oChildren1 = oGeneralData1.Child("CBF_FAR1");
// Create data for rows in the child table
SAPbouiCOM.Item oItem = oForm.Items.Item("cmbShed");
oCombo = oItem.Specific;
string ShedCode = oCombo.Selected.Value;
ldna_Rec = clsAddOn.LDNA_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
string strQuery1 = "select LineId from [@CBF_FAR1] where U_ShedCd = " + ShedCode;
ldna_Rec.DoQuery(strQuery1);
oChild1 = oChildren1.Item(ldna_Rec.Fields.Item("LineId").Value - 1);
oChild1.SetProperty("U_Status", "Ready For Schedule");
//Update the UDO Record
oGeneralService1.Update(oGeneralData1);
Please Help me it is an urgent requirement,
-Regards
Vikashi.
Error is - "Invalid row"
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
As per my knowledge
What i understood is you have 5 lines and you are going to be update 5th line
am i correct..
while u are updating the line in child table
you have to consider like this..
line number u have to update like
1 0
2 1
3 2
4 3
5 4
which means in child table treat
line 1 as 0
line 2 as 1
line 5 as 4
If you want to update the line 5 u have to mention 4 th line -
How do you assign the user who has logged in current session ?
Hello,
in oracle forms , you could assigned user who has logged in to any field , e.g field_name := USER_ID;
I need to assign the user who has logged to a field in jdeveloper 12 . How do you do that please ?
Thanks.Try this: https://www.google.com/search?q=adf+get+current+user
CM.
Maybe you are looking for
-
Does anyone know how to transfer my contacts from my iphone onto my i cloud please? I cnnot do it no more s they have made something so simple to do into a task that seems so omplicated.ive tryed ooads and now im starting to loose my cool.Thanks if y
-
Need list of Videocams for FMLE
Is there a list of cameras that show up in FMLE for broadcast. To date we have been using web cams with no problem, but now need a better cam for a larger event. We are money sensitive, so we don't need near broadcast cameras if we can avoid it. I ha
-
How to transfer files to external hardrive to free up space on my internal drive
HOW TO TRANSFER FILES TO MY EXTERNAL HARD DRVE TO FREE UP SPACE ON MY INTERNAL HARD DRIVE
-
I have a question regarding good practice with SL server setup on single server networks/domains. Normally, in past lives with Linux I would have setup services to respond as "mail.mybiz.com", "vpn.mybiz.com", "ical.mybiz.com", "ichat.mybiz.com". I w
-
How to send mail in PL/SQL?
Hi: I want to send email in PL/SQL in linux. Could anybody tell me how to do it? By the way,what is DBMS_MAIL? Can I use it and how to use? Thanks! BEST REGARDS! Sherwin null