Issue while cube load

Hi All,
I am getting following error while doing the cube load.
***Error Occured in __XML_PARALLEL_LOADER: In __XML_UNIT_LOADER: In __XML_RUN_CC_AUTOSOLVE: Incremental aggregation over the dense DIMENSION OLAP_AGG!SCENARIO is not supported when aggregating a VARIABLE dimensioned by a COMPRESSED COMPOSITE.
I understand this error comes when we try to aggregate the compressed cube and dimensions are not limit to all(limit to some values only). I faced this issue when manually running the aggmap of the cube after limiting the dimenisons.
But this is happening now in the cube load through the script generated by AWM. I cannot run the cube load through AWM as this is in UAT env.
One more clue is that the permit read is implemented and it do not allows to see some private scenarios but this should not cause the issue as permit_read will only get executed when user tries to connect in read only mode.
Here is the xml load log content.
13:08:47 ***Error Occured: Failed to Build(Refresh) XPRO_OLAP_AGG.OLAP_AGG Analytic Workspace.
13:08:46 ***Error Occured in __XML_PARALLEL_LOADER: In __XML_UNIT_LOADER: In __XML_RUN_CC_AUTOSOLVE: Incremental aggregation over the >dense DIMENSION OLAP_AGG!SCENARIO is not supported when aggregating a VARIABLE dimensioned by a COMPRESSED COMPOSITE.
13:08:46 Job #AWXML$_9179_3238 Stopped.
13:08:44 Job #AWXML$_9179_3237 Stopped.
13:08:42 Incremental aggregation over the dense DIMENSION OLAP_AGG!SCENARIO is not supported when aggregating a VARIABLE dimensioned by a >COMPRESSED COMPOSITE.
13:08:29 Started Auto Solve for Measures: OPER_CUST_OPER_DATA from Cube OPERATIONAL_CUSTOMER.CUBE. Q2 2009 Partition.
13:08:29 Finished Load of Measures: OPER_CUST_OPER_DATA from Cube OPERATIONAL_CUSTOMER.CUBE. Q2 2009 Partition. Processed 71359 >Records. Rejected 0 Records.
13:08:21 Started Load of Measures: OPER_CUST_OPER_DATA from Cube OPERATIONAL_CUSTOMER.CUBE. Q2 2009 Partition.
13:08:21 Started Load of Measures: OPER_CUST_OPER_DATA from Cube OPERATIONAL_CUSTOMER.CUBE. Q1 2009 Partition.
13:08:21 Started Load of Measures: OPER_CUST_OPER_DATA from Cube OPERATIONAL_CUSTOMER.CUBE. Q1 2008 Partition.
13:08:20 Attached AW XPRO_OLAP_AGG.OLAP_AGG in MULTI Mode.
13:08:20 Attached AW XPRO_OLAP_AGG.OLAP_AGG in MULTI Mode.
13:08:19 Attached AW XPRO_OLAP_AGG.OLAP_AGG in MULTI Mode.
13:08:17 Running Jobs: AWXML$_9179_3237, AWXML$_9179_3238, AWXML$_9179_3239. Waiting for Free Process...
13:08:17 Started 3 Finished 0 out of 5 Tasks.
13:08:17 Running Jobs: AWXML$_9179_3237, AWXML$_9179_3238, AWXML$_9179_3239.
13:08:17 Started 3 Finished 0 out of 5 Tasks.
13:08:17 Running Jobs: AWXML$_9179_3237, AWXML$_9179_3238.
13:08:17 Started 2 Finished 0 out of 5 Tasks.
13:08:17 Running Jobs: AWXML$_9179_3237.
13:08:17 Started 1 Finished 0 out of 5 Tasks.
13:08:17 Starting Parallel Processing.
13:08:17 Detached AW XPRO_OLAP_AGG.OLAP_AGG.
13:07:17 Attached AW XPRO_OLAP_AGG.OLAP_AGG in RW Mode.
13:07:15 Started Build(Refresh) of XPRO_OLAP_AGG.OLAP_AGG Analytic Workspace.
13:07:14 Job# AWXML$_9179 to Build(Refresh) Analytic Workspace XPRO_OLAP_AGG.OLAP_AGG Submitted to the Queue.Any help on this error?
Thanks
Brijesh

In AW, Right click on the Cube to Maintain it. Once done, Rebuild the cube. If this doesn't work, then first save the cube to template. Delete the cube, recreate it from the saved template and then maintain it followed by restarting all services and then do the full build.
Regards
Ankur Patel
글 수정: user8337346

Similar Messages

Can we show some user defined message while cube loading in OBIEE

Hi All,
Currently we are building OBIEE dashboards from Essbase ASO Cube as datasource.
During Essbase Cube loading ,Essbase will "Disable all Administrative Commands".In this mean time,When users are trying to run the dashboards,OBIEE will thorws severe error.
Can we dispaly some user defined message something like "Cube is loading.Please wait...." or any other alternative.
Time taken to load the cube is 1hr.Please suggest
Thanks,
SatyaB

Yes, You can better try replacing the whole OBIEE dashboard with a custom message. Whenver the load happens...you shud trigger or set a flag value to 'Y'. Using guided navigation when Flag value is matched to Y...right a JS to replace the whole dashboard.
[html]
[head]
[script type="text/javascript"]var strStatus="@1";
if(strStatus =='Y')
location.replace('saw.dll?PortalPages&_scid=in6lPJnWWNk&PortalPath=/shared/Framework/_portal/Cube%20Status%20&Page=Cube%20Status');
[script]
[head]
Replace square bracket with curly brackets in above replace code..
BTW, you shud mark the previous post on Implicit fact. Follow https://forums.oracle.com/forums/ann.jspa?annID=939

Unknown issue while loading .dbf file by sql loader

Hi guys,
I am having a unknown issue while loading .dbf file by sql loader.
I need to load .dbf data into oracle table.for this I converted .dbf file by just changing its extension as .csv . file structure after changing .dbf to .csv --
C_N_NUMBER,COMP_CODE,CPT_CODE,C_N_AMT,CM_NUMBER
1810/4,LKM,30,45,683196
1810/5,LKM,30,45,683197
1810/6,LKM,30,45,683198
1810/7,LKM,30,135,683200
1810/8,LKM,30,90,683201
1810/9,LKM,1,45,683246
1810/9,LKM,2,90,683246
1810/10,LKF,1,90,683286
2810/13,LKJ,1,50.5,680313
2810/14,LKJ,1,50,680316
1910/1,LKQ,1,90,680344
3910/2,LKF,1,238.12,680368
3910/3,LKF,1,45,680382
3910/4,LKF,1,45,680395
7910/5,LKS,1,45,680397
7910/6,LKS,1,90,680400
7910/7,LKS,1,45,680401
7910/8,LKS,1,238.12,680414
7910/9,LKS,1,193.12,680415
7910/10,LKS,1,45,680490
then I am loading it by sql loader.but I am getting always error below ...
Record 1: Rejected - Error on table C_N_DETL_TAB, column CPT_CODE.
ORA-01438: value larger than specified precision allowed for this column
Record 2: Rejected - Error on table C_N_DETL_TAB, column CPT_CODE.
ORA-01438: value larger than specified precision allowed for this column
table structure-
create table C_N_DETL_tab
"C_N_NUMBER" VARCHAR2(13),
"COMP_CODE" VARCHAR2(3),
"CPT_CODE" NUMBER(4),
"C_N_AMT" NUMBER(20,18),
"CM_NUMBER" NUMBER(7)
control file-
options(skip=1)
load data
infile '/softdump/pc/C_N_DETL.csv'
badfile '/softdump/pc/C_N_DETL.bad'
discardfile '/softdump/pc/C_N_DETL.dsc'
into table C_N_DETL_tab
truncate
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
C_N_NUMBER CHAR,
COMP_CODE CHAR,
CPT_CODE INTEGER,
C_N_AMT INTEGER,
CM_NUMBER INTEGER
but guys when I am increasing size of all columns of tabel upto its max value then data is loaded but when I am checking column max length after data loaded then its very less..
changed table structure-
create table C_N_DETL_tab
"C_N_NUMBER" VARCHAR2(130),
"COMP_CODE" VARCHAR2(30),
"CPT_CODE" NUMBER(32), ---- max value of number
"C_N_AMT" NUMBER(32,18), ---- max value of number
"CM_NUMBER" NUMBER(32) ---- max value of number
now i ma running ...
sqlldr express/express control=C_N_DETL.ctl log=C_N_DETL.log
o/p-
Table C_N_DETL_TAB, loaded from every logical record.
Insert option in effect for this table: TRUNCATE
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
---------- ---- ---- C_N_NUMBER FIRST * , O(") CHARACTER
COMP_CODE NEXT * , O(") CHARACTER
CPT_CODE NEXT 4 INTEGER
C_N_AMT NEXT 4 INTEGER
CM_NUMBER NEXT 4 INTEGER
Table C_N_DETL_TAB:
20 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
select max(length( CPT_CODE))from C_N_DETL_tab ---> 9
can u tell me why I need to increase size of table columns upto max value?although length of data is soo much less.
kindly check it..thnx in advance...
rgds,
pc

No database version of course. Unimportant.
If I recall correctly, it is 'integer external ' and you would best double quoting the alphanumerics (which you didn't ).
Try changing integer in integer external in the ctl file.
Sybrand Bakker
Senior Oracle DBA

Special character issue while loading data from SAP HR through VDS

Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
Thanks

We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards.

Issue while loading berkeley database

Hi,
I have an issue while loading data into the Berkeley Database. When I load the xml files into Berkeley database, some files are being created. the files are named something like db.001,db.002,log.00000001 etc. I have a server running which tries to access the files .When I try to reload the Berkeley db while my server is running, I am unable to load the Berkeley database. I have to stop the server, load the berkeley DB and restart the server again . Is there any way in which I can reload the database without having to restart the server. Your response would be of help to me to find a solution to this issue. I am currently using Berkeley Database version 2.2.13
Thanks,
Priyadarshini
Message was edited by: Priyadarshini
user569257

Hi Priyadarshini,
The db.001 and db.002 are the environment's region files and the log.00000001 is one of the environment's transactional logs. The region files are created when you use an environment, and their size and number depend on the subsystems that you configure on your environment (memory pool, logging, transactions, locking). The log files reflect the modifications that you perform on your environment's database(s), and they are used along with the transaction subsystem to provide recoverability, ACID capabilities and protect against application or system failures.
Is there a reason why that server tries to access these files ? The server process that runs while you load your database should not interfere with those files as they are used by Berkeley DB.
Regards,
Andrei

Authorization issue while using business content objects

Hi all,
I am getting an authorization error while loading from DSO to Cube (for standard business content objects only). Even i am not able access the data in Bex reports from Standard cubes or DSO.
The user is assigned to SAP_ALL .
But there is no such issue while accessing user defined DSO or cubes.
any solutions will be helpful.
Regards,
Varma

Hi,
Have you seen the error thru the SU53 t-code ? There you should see what is the missing authorization with the user.
Regards, Federico

Issue while Processing the Huge File in BPEL

Hi,
We are facing an Issue while Processing a Hige file in BPEL Process (More than 1MB File). When i test the files with more than 1500 transactions (More than 1MB file) then the BPEL Process is automatically goes to OFF Mode or it goes to Perform Manually Recovery Queue.
Even we are facing this issue in Production also so we are using UNIX Script to Split the file before place the file in BPEL Input directory.Any Pointers to resolve this issue will be helpful.
Thanks,
Saravana

Hi,
Please find the answers.
1. Currently we are using SOA 10.1.2 Version and JDev10g
2. we are using File Adapeter
3. yes. We used debatching.
4. Yes. I am able to recover from Manual Recovery Queue
5. Please find the error message
<2009-05-21 04:32:38,461> <DEBUG> <ESIBT.collaxa.cube.engine.dispatch> <Dispatcher::adjustThreadPool> Allocating 1 thread(s); pending threads: 1, active threads: 0, total: 83
<2009-05-21 04:32:44,077> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> File : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B is ready to be processed.
<2009-05-21 04:32:44,077> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Processing file : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B
<2009-05-21 04:32:44,077> <DEBUG> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> onBatchBegin: Batch 'bpel://localhost/ESIBT/BPELProcess_810~1.0//Input5162009.B2B_1242894594000' (/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B) starting...
<2009-05-21 04:32:44,077> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> Inside TranslatorFactory
<2009-05-21 04:32:44,078> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> using version attribute = NXSD
<2009-05-21 04:32:44,078> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> loading xlator class...oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl
<2009-05-21 04:32:44,081> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> class loaded
<2009-05-21 04:32:44,081> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Created translator : oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl@46908ae8
<2009-05-21 04:32:44,098> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Setting up Control dir for debatching error recovery
<2009-05-21 04:32:44,121> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Control dir for debatching error recovery : /opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/j2ee/home/fileftp/controlFiles/localhost_ESIBT_BPELProcess_810~1.0_/inbound
<2009-05-21 04:32:44,121> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Invoking inbound translation for : Input5162009.B2B
<2009-05-21 04:32:44,121> <DEBUG> <ESIBT.collaxa.cube.translation> <NXSDTranslatorImpl::log> Starting translateFromNative
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.translation> <NXSDTranslatorImpl::log> Done with translateFromNative
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Completed inbound translation for : Input5162009.B2B
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> isTextFile : true
<2009-05-21 04:32:44,139> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Translated inbound batch index 1 of file {Input5162009.B2B} with corrupted message count = 1
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Error Reader created using charset :ASCII
<2009-05-21 04:32:44,139> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Sending message to Adapter Framework for rejection to user-configured rejection handlers : {
fileName=/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B, startLine=1, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11167
Error while reading native data.
[Line=1, Col=70] Expected "\t" at the specified position in the native data, while trying to read the data for "element with name HDR_STORE_NUM", using "style" as "terminated" and "terminatedBy" as "\t", but not found.
Ensure that "\t", exists at the specified position in the native data.
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Setting batchId in NativeRecord to bpel://localhost/ESIBT/BPELProcess_810~1.0//Input5162009.B2B_1242894594000
<2009-05-21 04:32:44,139> <WARN> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> [Read_ptt::Read(Object)] - onReject: The resource adapter 'File Adapter' requested handling of a malformed inbound message. However, the following bpel.xml activation property has not been defined: 'rejectedMessageHandlers'. Please define it and redeploy the business process. Will use the default Rejection Directory file:///opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/ESIBT/archive/jca/BPELProcess_810/rejectedMessages for now.
<2009-05-21 04:32:44,140> <WARN> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> [Read_ptt::Read(Object)] - onReject: Sending invalid inbound message to Exception Handler:
<2009-05-21 04:32:44,140> <INFO> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> Handing rejected message to DEFAULT rejection handler: file:///opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/ESIBT/archive/jca/BPELProcess_810/rejectedMessages since none of the configured rejection handlers [] succeeded.
<2009-05-21 04:32:44,140> <DEBUG> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> Finished persisting rejected message to file system under the name: /opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/ESIBT/archive/jca/BPELProcess_810/rejectedMessages/INVALID_MSG_BPELProcess_810_Read_20090521_043244_0140.dat
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Setting last error record to : -1
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Translator has failed to translate any message from batch number: 1
<2009-05-21 04:32:44,141> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Message not published as translation failed: {
File=/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B, batchIndex=1, PublishSize=1
<2009-05-21 04:32:44,141> <ERROR> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> onBatchFailure: Batch 'bpel://localhost/ESIBT/BPELProcess_810~1.0//Input5162009.B2B_1242894594000' (/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B) has failed due to: ORABPEL-11167
Error while reading native data.
[Line=1, Col=70] Expected "\t" at the specified position in the native data, while trying to read the data for "element with name HDR_STORE_NUM", using "style" as "terminated" and "terminatedBy" as "\t", but not found.
Ensure that "\t", exists at the specified position in the native data.
<2009-05-21 04:32:44,141> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Deleting file : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B after processing.
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Deleting file : Input5162009.B2B
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Deleted file : true
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Removing file /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B from files to be processed Map.
<2009-05-21 04:32:44,141> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Done processing File : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B
<2009-05-21 04:33:09,698> <DEBUG> <ESIBT.collaxa.cube.engine.data> <ConnectionFactory::getConnection> GOT CONNECTION 4 Autocommit = false
For this error message this shows due to some /t its not picking up the file. but even i am facing the same issue for all the files where load is huge.
Thanks,
Saravana

Incremental Cube Load Error: job slave process terminated

Hi,
For performance reasons, we switched to Incremental Cube Loading i.e. only those partitions are autosolved whose data is made available.
Some times, the background submitted job terminates and the reason given in dba_scheduler_job_run_details is:
REASON="Job slave process was terminated"
There so no definits occurance pattren for this error.
The job submitted in background is killed.
The last entry the xml_load_log displayed is of Started Auto solving of a partition.
After this error occurs, we have to Full Aggregate the cube; which offcourse would autosolve all partitions.
We have been too much annoyed by this error as we did lot of package changes as part of a release to production to include Incremental cube loading, and once done, we see that incremental cube loading just terminates while autosolving a partitions.
Can any one assist please? Urgent?
thank you,

Hi,
There is a metalink note about this issue. Check note 443348.1
Thanks
Brijesh

Performance issue while generating Query

Hi BI Gurus.
I am facing performance issue while generating query on 0IC_C03.
It has a variable as (from & to) for generating the report for a particular time duration.
if the variable (from & to) fields is filled then after taking a long time it shows run time error.
& if the query is executed without mentioning the variable(which is optional) then the data is extracted from beginning to till date. the same takes less time in execution.
& after that the period has to be selected manually by option keep filter value. please suggest how can i solve the error
Regards
Ritika

HI RITIKA,
WEL COME TO SDN.
YOUHAVE TO CHECK THE FOLLOWING RUN TIME SEGMENTS USING ST03N TCODE:
High Database Runtime
High OLAP Runtime
High Frontend Runtime
if its high Database Runtime :
- check the aggregates or create aggregates on cube and this helps you.
if its High OLAP Runtime :
- check the user exits if any.
- check the hier. are used and fetching in deep level.
If its high frontend runtime:
- check if a very high number of cells and formattings are transferred to the Frontend ( use "All data" to get value "No. of Cells") which cause high network and frontend (processing) runtime.
For From and to date variables, create one more set and use it and try.
Regs,
VACHAN

Embedded JMS/OC4J issue while running an application in Jdeveloper 10.1.3.2

Hi,
I am facing an issue while running an application on my laptop.I downloaded Jdeveloper 10.1.3.2.Installed Jheadstart along with that.
Created a new application specified in HR demo.When I run the application I get following messages,After that it does not show my application pages.It does not even open browser window.
[waiting for the server to complete its initialization...]
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
07/08/29 18:01:55 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized
When I delete persistnce directory files under embedded oc4j (specifically jms.state), It logs following messages.But it does not run my application pages and not even open browser window to display some error.
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config>
C:jdevstudio10132\jdk\bin\javaw.exe -client -classpath C:jdevstudio10132\j2ee\home\oc4j.jar;C:jdevstudio10132\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -XX:MaxPermSize=256m -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
07/08/29 18:06:16 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized.
I tried by creating another standalone application with simple html page, it throws same logs and does not show up browser window.I even tried with Jdeveloper 10.1.3.3, but still same issue .
can you please throw some light on this issue and any suggestion for resolutions.
Thanks.

Can someone throw somelight on this issue?
I posted the same issue in Jdeveloper forum but did not receive any reply .appreciate your suggestions.
Thanks
Sekar.

JMS/OC4J issue while running an application in Jdeveloper 10.1.3.2/10.1.3.3

Hi,
I am facing an issue while running an application on my laptop.I downloaded Jdeveloper 10.1.3.2.Installed Jheadstart along with that.
Created a new application specified in HR demo.When I run the application I get following messages,After that it does not show my application pages.It does not even open browser window.
[waiting for the server to complete its initialization...]
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
07/08/29 18:01:55 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized
When I delete persistnce directory files under embedded oc4j (specifically jms.state), It logs following messages.But it does not run my application pages and not even open browser window to display some error.
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config>
C:jdevstudio10132\jdk\bin\javaw.exe -client -classpath C:jdevstudio10132\j2ee\home\oc4j.jar;C:jdevstudio10132\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -XX:MaxPermSize=256m -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
07/08/29 18:06:16 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized.
I tried by creating another standalone application with simple html page, it throws same logs and does not show up browser window.I even tried with Jdeveloper 10.1.3.3, but still same issue .
can you please throw some light on this issue and any suggestion for resolutions.
Thanks.

I am also facing the same issue on my laptop. I searched for forum but no luck.
appreciate if anybody can throw some light on this.

Error while data loading

Hi Gurus,
I am getting error while data loading. At BI side when I check the error it says Background Job Cancelled and when I check in R3 side I got the following error
Job started
Step 001 started (program SBIE0001, variant &0000000065503, user ID R3REMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_11_V_ITM
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000683008                              *
abap/heap_area_total.......... 4000317440                              *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500352                                 *
ztta/roll_extension........... 3001024512                              *
4 LUWs confirmed and 4 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Please help me out what should I do.
Regards,
Mayank

Hi Mayank,
The log says it went to short dump due to temp space issue.as its the source system job ,check in the source system side for temp table space and also check at the BI side as well.
Check with your basis regarding the TEMP PSA table space - if its out of space ask them to increase the table space and try to repeat the load.
Check the below note
Note 796422 - DBIF_RSQL_SQL_ERROR during deletion of table BWFI_AEDAT
Regards
KP
Edited by: prashanthk on Jul 19, 2010 10:42 AM

Facing issue while reading XML file 'LPX-00217: '

Hi Gurus,
I am facing one issue while reading the xml file in the one my 11g database instance. The same file if I ran in another instance then it is working fine for me.
I presume it will be related to NLS character. Please help me in finding out character set.
And the issue where I am getting instance character set is 'US7ASCII', and I am not getting this issue in another instance where the character set is 'UTF8'.
And here is the issue I am getting when I was trying to load that file.
Error Occurred :=ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML
processing
LPX-00217: invalid character 150 (U+0096)
Error at line 1
Pls help me in debugging this issue.
Regards,
Nagendra
Edited by: 838961 on Jul 12, 2011 9:32 PM

Hi,
Pls help me in debugging this issue.There's not much to debug actually.
The US7ASCII charset stores 7-bit characters, but you're trying to insert a value out of range (150). So that's expected behaviour.
There were some "tricks" to allow that on some versions, using NLS settings, but it's definitely not the clean way to do it so I won't develop.
The best thing you have to do is to migrate to character set AL32UTF8, which is fully compliant with XML.

Issue while starting AdminSerever using wlst commands

Hi, I am facing issue while trying to start the AdminServer and Managed Server via nodemanager using wlst commands. I have installelled WebLogic 11g on windows 2008 R2. Mentioned below are the steps that I followed:
1) In Nodemanager.properties files I set following parameters to true. I did this, so that nodemanager can start the server in case of crash.
CrashRecoveryEnabled=true
StartScriptEnabled=true
2) started nodemanager and then started AdminServer from the command prompt as follows:
nmConnect('weblogic','password','10.23.226.58','5556','IMDomain','E:\Oracle\Middleware\user_projects\domains\IMDomain','ssl')
nmStart('AdminServer')
I dont see any errors but it seems the AdminServer do Not start properly as in the cmd window I don't see any 'started successfully' message - the message remains as *"Starting AdminServer..."*
However in the adminServer logs I see that the status is Running (refer logs at the end) and I can also see it as Running in weblogic console.
I really didnt care if its not giving a success message in cmd window but the problem occurs when I start the managedServer. After starting the managed server in about 10 minutes, there is a stuck thread. (I guess it is 10 mins because Stuck Thread MaxTime value is 600).
If I set StartScriptEnabled=false, and start by directly running the startweblogic.cmd then it works fine.
I am struggling with this for last 1 week, appreciate any help.
LOGS.......
Starting WLS with line:
E:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.xml.stream.XMLInputFactory=weblogic.xml.stax.XMLStreamInputFactory -Dweblogic.security.SSL.nojce=true -Xverify:none -da -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dwli.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\integration -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=E:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;E:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sysext_manifest_classpath weblogic.Server
<Mar 14, 2012 3:16:30 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Mar 14, 2012 3:16:30 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Mar 14, 2012 3:16:30 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.2-b06 from Sun Microsystems Inc.>
<Mar 14, 2012 3:16:31 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Mar 14, 2012 3:16:32 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Mar 14, 2012 3:16:32 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Mar 14, 2012 3:16:32 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\IMDomain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Mar 14, 2012 3:16:36 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 14, 2012 3:16:37 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Mar 14, 2012 3:16:37 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Mar 14, 2012 3:16:39 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
Mar 14, 2012 3:16:39 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.227.211.13:8001 for protocols iiop, t3, ldap, snmp, http.>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "IMDomain" running in Production Mode>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\PROGRA~1\Java\JDK16~1.0_2\jre\lib\security\cacerts.>
<Mar 14, 2012 3:20:53 PM CDT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 14:12:27 CST 2002,
               To: Tue Mar 22 15:12:27 CDT 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 15, 2012 11:41:41 AM CDT> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "650" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@68a3f7ed", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:129)
weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
java.io.InputStream.read(InputStream.java:85)
com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
com.certicom.tls.record.ReadHandler.read(Unknown Source)
com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
java.io.InputStreamReader.read(InputStreamReader.java:167)
java.io.BufferedReader.fill(BufferedReader.java:136)
java.io.BufferedReader.readLine(BufferedReader.java:299)
java.io.BufferedReader.readLine(BufferedReader.java:362)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:102)
weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:47)
weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<Mar 15, 2012 11:42:41 AM CDT> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "710" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@68a3f7ed", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:129)
weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
java.io.InputStream.read(InputStream.java:85)
com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
com.certicom.tls.record.ReadHandler.read(Unknown Source)
com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
java.io.InputStreamReader.read(InputStreamReader.java:167)
java.io.BufferedReader.fill(BufferedReader.java:136)
java.io.BufferedReader.readLine(BufferedReader.java:299)
java.io.BufferedReader.readLine(BufferedReader.java:362)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:102)
weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:47)
weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>

Hi chamila,
    I never tried the example. Exception is not clear. Could you please post more stack trace from log files.
Thanks,
Sham

Facing issue while deployment on 11.1.1.6 soa server

Problem Summary
Facing issue while deployment on 11.1.1.6 soa server
Problem Description
We are facing issue while deploying a bpm project over a newly built bps-soa server 11.1.1.6.
While we are deploying a bpm project, first it is taking around 40mins to create .jar file and then while deploying, it is getting failed with transaction timed out error.
"composite: Onboarding: javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 301 second".
we have tried with changing all transaction parameters also like JTA,XA( as similar to our exiting running QA/PROD environment which is on 11.1.1.5) but even then facing the same issue.
The code were originally build over 11.1.1.5 version, for the first time opening with jdev, code gets migrated and over the upgraded code we did some business specific changes and now trying to deploy over the new server.
Code is getting successfully compiled and also .jar file is creating properly but while deployment facing error(As shared earlier).
Also tried to deploy the same .jar file using em consle(to soa-infra) but facing similar issue.
Error Codes
Problem Category/Subcategory
BPM 11g installation issues
Uploaded Files
Template Question Responses
1) ### Product Versions Including Build Numbers ###
BPM SOA suite 11.1.1.6
2) ### Is the Issue Reproducible ###
Yes, mentioned in issue detailes.
3) ### OS Version ###
SunOS xxxxx 5.10 Generic_144488-06 sun4v sparc SUNW,T5440
More logs:
Name
=== ODM Data Collection ===
[2013-02-27T01:10:59.436-05:00] [soa_server1] [WARNING] [] [oracle.soa.bpel.engine.deployment] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] Unable to obtain the audit metadta java.lang.IllegalStateException: The transaction associated with this transaction-scoped persistence context has been rolled back and as a result, the EntityManager has been closed. No further operations are allowed in this transaction context. Please see the server log for the cause of the rollback.
[2013-02-27T01:11:17.402-05:00] [soa_server1] [WARNING] [] [oracle.soa.bpel.engine.deployment] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] Unable to obtain the audit metadta java.lang.IllegalStateException: The transaction associated with this transaction-scoped persistence context has been rolled back and as a result, the EntityManager has been closed. No further operations are allowed in this transaction context. Please see the server log for the cause of the rollback.
[2013-02-27T01:11:18.147-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.bpel.engine.deployment] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] BPEL Component "default/Onboarding!2.0*soa_8130f118-f9b5-462a-8e75-5ec0f34b45bd/Remediation" successfully loaded.
[2013-02-27T01:11:18.166-05:00] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] Unable to activate process Remediation[[
javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.ejb.container.internal.EJBRuntimeUtils.throwEJBException(EJBRuntimeUtils.java:156)
at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocalObject.java:595)
at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetry(BaseLocalObject.java:455)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:52)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNServerManagerBean_6gbx7k_IBPMNCubeServerManagerLocalBeanImpl.deployComponent(Unknown Source)
at oracle.fabric.CubeServiceEngine.load(CubeServiceEngine.java:842)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.load(BPMNServiceEngine.java:636)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.load(BPMNServiceEngine.java:151)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployComponents(CompositeDeploymentConnection.java:243)
Caused by: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
BEA1-172EC48037986ACD0C13
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
... 2 more
FileName
soa_server1-diagnostic-2.log

2 things must be noticed:
First: ODI 11g is not supported by JDK 7, I always use the JDK1.6.0_27 and works fine. When you try to open the ODI Studio, this message appears, telling that ODI is supported only with JDK 6 versions, so don't try to use JDK 7.
Second: I always install the JDK in a path without spaces, like "C:\JDK1.6.0_27\" and the excatly same thing to odi install files. So I call via Command Prompt:
C:\ODI_INSTALL\Disk1\setup.exe -jreLoc C:\JDK1.6.0_27\
I did over 20 windows installations using these settings, it'll work perfectly.
Regards.
Luiz Araujo

Issue while cube load

Similar Messages

Maybe you are looking for