Issue while loading berkeley database

Hi,
I have an issue while loading data into the Berkeley Database. When I load the xml files into Berkeley database, some files are being created. the files are named something like db.001,db.002,log.00000001 etc. I have a server running which tries to access the files .When I try to reload the Berkeley db while my server is running, I am unable to load the Berkeley database. I have to stop the server, load the berkeley DB and restart the server again . Is there any way in which I can reload the database without having to restart the server. Your response would be of help to me to find a solution to this issue. I am currently using Berkeley Database version 2.2.13
Thanks,
Priyadarshini
Message was edited by: Priyadarshini
user569257

Hi Priyadarshini,
The db.001 and db.002 are the environment's region files and the log.00000001 is one of the environment's transactional logs. The region files are created when you use an environment, and their size and number depend on the subsystems that you configure on your environment (memory pool, logging, transactions, locking). The log files reflect the modifications that you perform on your environment's database(s), and they are used along with the transaction subsystem to provide recoverability, ACID capabilities and protect against application or system failures.
Is there a reason why that server tries to access these files ? The server process that runs while you load your database should not interfere with those files as they are used by Berkeley DB.
Regards,
Andrei

Similar Messages

Unknown issue while loading .dbf file by sql loader

Hi guys,
I am having a unknown issue while loading .dbf file by sql loader.
I need to load .dbf data into oracle table.for this I converted .dbf file by just changing its extension as .csv . file structure after changing .dbf to .csv --
C_N_NUMBER,COMP_CODE,CPT_CODE,C_N_AMT,CM_NUMBER
1810/4,LKM,30,45,683196
1810/5,LKM,30,45,683197
1810/6,LKM,30,45,683198
1810/7,LKM,30,135,683200
1810/8,LKM,30,90,683201
1810/9,LKM,1,45,683246
1810/9,LKM,2,90,683246
1810/10,LKF,1,90,683286
2810/13,LKJ,1,50.5,680313
2810/14,LKJ,1,50,680316
1910/1,LKQ,1,90,680344
3910/2,LKF,1,238.12,680368
3910/3,LKF,1,45,680382
3910/4,LKF,1,45,680395
7910/5,LKS,1,45,680397
7910/6,LKS,1,90,680400
7910/7,LKS,1,45,680401
7910/8,LKS,1,238.12,680414
7910/9,LKS,1,193.12,680415
7910/10,LKS,1,45,680490
then I am loading it by sql loader.but I am getting always error below ...
Record 1: Rejected - Error on table C_N_DETL_TAB, column CPT_CODE.
ORA-01438: value larger than specified precision allowed for this column
Record 2: Rejected - Error on table C_N_DETL_TAB, column CPT_CODE.
ORA-01438: value larger than specified precision allowed for this column
table structure-
create table C_N_DETL_tab
"C_N_NUMBER" VARCHAR2(13),
"COMP_CODE" VARCHAR2(3),
"CPT_CODE" NUMBER(4),
"C_N_AMT" NUMBER(20,18),
"CM_NUMBER" NUMBER(7)
control file-
options(skip=1)
load data
infile '/softdump/pc/C_N_DETL.csv'
badfile '/softdump/pc/C_N_DETL.bad'
discardfile '/softdump/pc/C_N_DETL.dsc'
into table C_N_DETL_tab
truncate
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
C_N_NUMBER CHAR,
COMP_CODE CHAR,
CPT_CODE INTEGER,
C_N_AMT INTEGER,
CM_NUMBER INTEGER
but guys when I am increasing size of all columns of tabel upto its max value then data is loaded but when I am checking column max length after data loaded then its very less..
changed table structure-
create table C_N_DETL_tab
"C_N_NUMBER" VARCHAR2(130),
"COMP_CODE" VARCHAR2(30),
"CPT_CODE" NUMBER(32), ---- max value of number
"C_N_AMT" NUMBER(32,18), ---- max value of number
"CM_NUMBER" NUMBER(32) ---- max value of number
now i ma running ...
sqlldr express/express control=C_N_DETL.ctl log=C_N_DETL.log
o/p-
Table C_N_DETL_TAB, loaded from every logical record.
Insert option in effect for this table: TRUNCATE
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
---------- ---- ---- C_N_NUMBER FIRST * , O(") CHARACTER
COMP_CODE NEXT * , O(") CHARACTER
CPT_CODE NEXT 4 INTEGER
C_N_AMT NEXT 4 INTEGER
CM_NUMBER NEXT 4 INTEGER
Table C_N_DETL_TAB:
20 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
select max(length( CPT_CODE))from C_N_DETL_tab ---> 9
can u tell me why I need to increase size of table columns upto max value?although length of data is soo much less.
kindly check it..thnx in advance...
rgds,
pc

No database version of course. Unimportant.
If I recall correctly, it is 'integer external ' and you would best double quoting the alphanumerics (which you didn't ).
Try changing integer in integer external in the ctl file.
Sybrand Bakker
Senior Oracle DBA

ORA-12709: error while loading create database character set

I installed Oracle 8.05 on Linux successfully: was able to login
whith SQLPlus, start and stop the db whith svrmgrl etc.
During this install I chose WE8ISO8859P9 as the database
characterset when prompted.
After that I installed Oracle Application Server 3.02, and now
I'm getting the
ORA-12709: error while loading create database character set
message when I try to start up the database, and the database
won't mount.
Platform is RedHat Linux 5.2.
NLS_LANG set to different settings,
e.g. AMERICAN_AMERICA.WE8ISO8859P9
but without success.
Anyone any clue?
Thanks!
null

Jogchum Reitsma (guest) wrote:
: I installed Oracle 8.05 on Linux successfully: was able to
login
: whith SQLPlus, start and stop the db whith svrmgrl etc.
: During this install I chose WE8ISO8859P9 as the database
: characterset when prompted.
: After that I installed Oracle Application Server 3.02, and now
: I'm getting the
: ORA-12709: error while loading create database character set
: message when I try to start up the database, and the database
: won't mount.
: Platform is RedHat Linux 5.2.
: NLS_LANG set to different settings,
: e.g. AMERICAN_AMERICA.WE8ISO8859P9
: but without success.
: Anyone any clue?
: Thanks!
You can create the database with WE8DEC character set
and to use the WE8ISO8859P9 on the client or even on Linux.
The NLS_LANG setting doesn't effect the database, but the
interface with the database. The same setting can be used in de
windows 95/98/NT registry.
null

ORA-12709: error while loading create database character set after upgrade

Dear All
i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
current application version 12.0.6
please help me to resolve it.
SQL> startup;
ORACLE instance started.
Total System Global Area 1.2831E+10 bytes
Fixed Size 2171296 bytes
Variable Size 2650807904 bytes
Database Buffers 1.0133E+10 bytes
Redo Buffers 44785664 bytes
ORA-12709: error while loading create database character set
-bash-3.00$ echo $ORA_NLS10
/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_SID=PROD
-bash-3.00$ pwd
/u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
-bash-3.00$ ls -lh |more
total 56912
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
-rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
-rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
-rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
-rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
-rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
-rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
-rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
-rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
-rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
-rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
-rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
-rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
-rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
-rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
-rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
-rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
System name: SunOS
Node name: proddb3.zakathouse.org
Release: 5.10
Version: Generic_147440-19
Machine: sun4u
Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
System parameters with non-default values:
processes = 200
sessions = 400
timed_statistics = TRUE
event = ""
shared_pool_size = 416M
shared_pool_reserved_size= 40M
nls_language = "american"
nls_territory = "america"
nls_sort = "binary"
nls_date_format = "DD-MON-RR"
nls_numeric_characters = ".,"
nls_comp = "binary"
nls_length_semantics = "BYTE"
memory_target = 11G
memory_max_target = 12G
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
log_archive_format = "%t_%s_%r.dbf"
log_buffer = 14278656
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
db_recovery_file_dest_size= 14726M
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = "AUTO"
undo_tablespace = "APPS_UNDOTS1"
db_block_checking = "FALSE"
session_cached_cursors = 500
utl_file_dir = "/usr/tmp"
utl_file_dir = "/usr/tmp"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
utl_file_dir = "/usr/tmp"
plsql_code_type = "INTERPRETED"
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = "EXACT"
parallel_min_servers = 0
parallel_max_servers = 8
core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
audit_file_dest = "/u01/oracle/admin/PROD/adump"
db_name = "PROD"
open_cursors = 600
pga_aggregate_target = 1G
workarea_size_policy = "AUTO"
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4M
diagnostic_dest = "/u01/oracle"
max_dump_file_size = "20480"
Tue Jan 15 16:16:02 2013
PMON started with pid=2, OS id=18608
Tue Jan 15 16:16:02 2013
PSP0 started with pid=3, OS id=18610
Tue Jan 15 16:16:03 2013
VKTM started with pid=4, OS id=18612 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Tue Jan 15 16:16:03 2013
GEN0 started with pid=5, OS id=18616
Tue Jan 15 16:16:03 2013
DIAG started with pid=6, OS id=18618
Tue Jan 15 16:16:03 2013
DBRM started with pid=7, OS id=18620
Tue Jan 15 16:16:03 2013
DIA0 started with pid=8, OS id=18622
Tue Jan 15 16:16:03 2013
MMAN started with pid=9, OS id=18624
Tue Jan 15 16:16:03 2013
DBW0 started with pid=10, OS id=18626
Tue Jan 15 16:16:03 2013
LGWR started with pid=11, OS id=18628
Tue Jan 15 16:16:03 2013
CKPT started with pid=12, OS id=18630
Tue Jan 15 16:16:03 2013
SMON started with pid=13, OS id=18632
Tue Jan 15 16:16:04 2013
RECO started with pid=14, OS id=18634
Tue Jan 15 16:16:04 2013
MMON started with pid=15, OS id=18636
Tue Jan 15 16:16:04 2013
MMNL started with pid=16, OS id=18638
DISM started, OS id=18640
ORACLE_BASE from environment = /u01/oracle
Tue Jan 15 16:16:08 2013
ALTER DATABASE MOUNT
ORA-12709 signalled during: ALTER DATABASE MOUNT...

ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
Please see these docs.
ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
Ora-12709 While Trying To Start The Database [ID 311035.1]
ORA-12709 when Mounting the Database [ID 160478.1]
How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
Thanks,
Hussein

Error while loading create database charecter set

Hello,
I have completed instalation Oracle 9iV2 on Redhat 7.3 without any problems.
After I reboot the system, and try to start database, I have got error mesage:
ORA-12709: error while loading create database character set
Could anyone help?
Thanks

ORA-12709 error while loading create database character set
Cause: This is an internal error.
Action: Contact Oracle Support Services.

Special character issue while loading data from SAP HR through VDS

Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
Thanks

We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards.

Help : error while loading create database character set

SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 2022600 bytes
Variable Size 180355896 bytes
Database Buffers 411041792 bytes
Redo Buffers 6365184 bytes
ORA-12709: error while loading create database character set

ORA-12709 error while loading create database character set
Cause: This is an internal error.
Action: Contact Oracle Support Services.

Issue while loading the library files(".so" or ".sl") using JNI

Hi,
We are loading the c library files using system.load during the init phase of servlet.
While loading the application for the first time everything goes smooth and application behaves as expected.
We are facing the below issue when we try restarting the application through admin console in case of WAS (web sphere) for any patch deployment in the application.
java.lang.UnsatisfiedLinkError: Native Library /users/test1/siva/jnilib.so already loaded in another classloader.
If we restart the complete WAS every thing works fine.
There is no specific System.unload function available in java to remove the loaded library in JVM.
Is there any alternate way to unload the library which is loaded in class loader to resolve this issue which can be called in the destroy phase of servlet?
Any help here is highly apreciated.
TIA,
Siva.

sivabalan wrote:
Hi,
We are loading the c library files using system.load during the init phase of servlet.
You mean a shared library, not C files (which would be source.)
However I am not sure that loading it in a servlet is a good idea. But that is a different issue.
Is there any alternate way to unload the library which is loaded in class loader to resolve this issue which can be called in the destroy phase of servlet?This is how it works on the Sun VM back to about 1.2. And as far as I know there is no other way for it to work on any other VM.
You have a class with native methods that relies on the shared library. The class and the shared library are loaded into a class loader. If the class loader is unloaded by the GC then the native library will be unloaded as well.
A class loader can be collected by the GC if if the classes loaded by it are no longer actively references. So ALL class instances can be collected.
If the above is true then by running System.gc() twice it will collect the classloader and thus the native library.
So in your situation it might work if your app server allows you do GC (full GC is better if that is an option). You could try unloading the app, then doing the GC option several times, then do a load. Try the GC option about 6 times and the reduce it down to see if 2 work.
If that doesn't work then there could be some programmatic solutions using the same idiom.

Issue while loading Master Data through Process Chain in Production

Hi All,
We are getting an error in Process chain while loading Master Data
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
Regards
Bhanumathi

Hi
This problem is not related to Process chain..
u can try this..
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
(from JituK)
Hope it helps
Darshan

Data flow tasks faills while loading from database to excel

Hello,
I am getting error while loading from oledb source to excel and the error as shown below.
Error: 0xC0202009 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error: 0xC0209029 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (211)" failed because error code 0xC020907B occurred, and the error row
disposition on "input "OLE DB Destination Input" (211)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the
failure.
Error: 0xC0047022 at DFT - Company EX: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (198) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput
method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC02020C4 at DFT - Company EX, OLE DB Source 1 [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047038 at DFT - Company EX: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source 1" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine
called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Any help would be appreciated ASAP.
Thanks,
Vinay s

You can use this code to import from SQL Server to Excel . . .
Sub ADOExcelSQLServer()
' Carl SQL Server Connection
' FOR THIS CODE TO WORK
' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "EXCEL-PC\EXCELDEVELOPER" ' Enter your server name here
Database_Name = "AdventureWorksLT2012" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM [SalesLT].[Customer]" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
' Dump to spreadsheet
With Worksheets("sheet1").Range("a1:z500") ' Enter your sheet name and range here
.ClearContents
.CopyFromRecordset rs
End With
' Tidy up
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Also, check this out . . .
Sub ADOExcelSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "LAPTOP\SQL_EXPRESS" ' Enter your server name here
Database_Name = "Northwind" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM Orders" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A2:Z500")
.ClearContents
.CopyFromRecordset rs
End With
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Finally, if you want to incorporate a Where clause . . .
Sub ImportFromSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim RS As ADODB.Recordset
Set RS = New ADODB.Recordset
Server_Name = "Excel-PC\SQLEXPRESS"
Database_Name = "Northwind"
'User_ID = "******"
'Password = "****"
SQLStr = "select * from dbo.TBL where EMPID = '2'" 'and PostingDate = '2006-06-08'"
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ";"
'& ";Uid=" & User_ID & ";Pwd=" & Password & ";"
RS.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A1")
.ClearContents
.CopyFromRecordset RS
End With
RS.Close
Set RS = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Error coming while installing Berkeley database for IOS Device.

Hi I want to install berkeley db in my MAC. My Xcode version is 4.5.2. I downloaded db-5.3.21(Berkeley) from oracle site.I installed command line tool for xcode. I installed berkeley db in my MAC for iPhoneSimulator. Where as for iPhone device I am unable to install. I am following below link for installing the berkeley db. http://docs.oracle.com/cd/E17076_02/html/installation/build_unix_iphone.html
When I am installing berkeley db for IOS device it is showing following error.
checking for arm-apple-darwin11.4.2-sh... no checking for sh... /bin/sh checking for a BSD-compatible install... /usr/bin/install -c checking for arm-apple-darwin11.4.2-cc... /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc checking whether the C compiler works... no configure: error: in /Users/celstra/rajaramesh/db-5.3.21/build_unix': configure: error: C compiler cannot create executables See config.log' for more details
............................... The error is telling that C compiler cannot create executables... But for iPhonesimulator it is not showing the error...
Steps performed for installing Berkeley database for IOS device.
export DEV_iOS=/Developer/Platforms/iPhoneOS.platform/Developer
export SDK_iOS=${DEV_iOS}/SDKs/iPhoneOS6.0.sdk
export COMPILER_iOS=${DEV_iOS}/usr/bin
export CC=${COMPILER_iOS}/gcc
export CXX=${COMPILER_iOS}/g++
export CFLAGS="-arch armv6 -pipe -Os -gdwarf-2\
-no-cpp-precomp -mthumb -isysroot $SDKROOT "
export CXXFLAGS="-arch armv6 -pipe -Os -gdwarf-2\
-no-cpp-precomp -mthumb -isysroot $SDKROOT "
export CFLAGS=${LDFLAGS}
export CXXFLAGS=${LDFLAGS}
//export CPP=”/usr/bin/cpp ${CPPFLAGS}”
export LD=${COMPILER_iOS}/ld
export AR=${COMPILER_iOS}/ar
export AS=${COMPILER_iOS}/as
export NM=${COMPILER_iOS}/nm
export RANLIB=${COMPILER_iOS}/ranlib
../dist/configure --host=arm-apple-darwin9\
--prefix=$SDKROOT ...
Same steps i performed for iPHONESIMULATOR. But at that time c complier works fine. But while i am try to install for IOS device it is showing above error.
Can we need any license software for this installation. Could any one please provide exact document regarding installation for IOS device.
Any advice would be appreciated.
Edited by: 1000547 on Apr 17, 2013 12:58 AM
Edited by: 1000547 on Apr 17, 2013 1:03 AM
Edited by: 1000547 on Apr 17, 2013 2:31 AM

Thanks for the reply komal i did that but not cleared..one thing when i create the build from my flash builder the error happens.but the same project i used in another flashbuilder and create build..That build works fine...is there any chance for flash builder compiler problem.
cheers,
venkat

Issue while loading of data from DSO to InfoCube

Hi Experts,
Can you tell me what might root casue if data is coming into DSO from R3 its correct and fine as required but while loading it to InfoCube from DSO its showing wrong data like some of Line Items that were closed were shown open in Cube AND also KF values were not right
Also there is no Routine code involved b/w DSO and InfoCube.
Thanks in adv .
NP

Hope you didnt delete some req from DSO without deleting change log . This might cause inconsistency.
If so , delete data from dso by right click delete data and reload .

Issue while loading data from DSO to Cube

Gurus,
I'm facing a typical problem while loading Cube from a DSO. The load is based upon certain conditions.
Though the data in DSO satisfies those condition, but the Cube is still not being loaded.
All the loads are managed through Process Chains.
Would there be any reason in specific/particular for this type of problem?
Any pointers would be of greatest help !
Regards,
Yaseen & Soujanya

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Issue while loading data to sample essbase app using odi

while executing data load the error is
Now, while loading data to an essbase app i am getting the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx4.f$0(<string>:23)
at org.python.pycode._pyx4.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase(Unknown Source)
... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)

Hi,
It means in your options of the KM you have it set to quit when it hits one error, if you set it to 0 (infinite) then it will not stop no matter how many data load errors it hits.
If you set it to 0 and run the interface, depending on how you set up the options in the KM it can write to two log files, which you should check.
Cheers
John
http://john-goodwin.blogspot.com/

Exchange Powershell issue while loading the snapin on command prompt, in Exchange server 2010.

Hi,
When we launch the Exchange powershell via command prompt.. with below command:
PowerShell.exe -PSConsoleFile "D:\Program Files\Microsoft\Exchange Server\V14\Bin\ExShell.psc1"
it throws the following error:-
Following errors occured when loading the console
D:\Program Files\Microsoft\Exchange Server\V14\Bin\ExShell.psc1:
can not load windows powershell snap-in microsoft.exchange.management.powershell.e2010 because of the following error:
no snap-ins have been registered for windows powershell version 2
We are using Exchange server 2010 SP3 rollup 5 and EXCHANGE Server 2010 SP01.We see the issue on both the servers
Can you please provide the steps to reslove the issue.
Thanks & Regards,
Sanjeev Gupta

I have got the resolution of the problem. In my environment, the Powershell.exe which was being launched from command prompt, was 32 bit exe, while it was needed 64 bit exe.
It was occuring because in system path there was 32 bit powershell.exe was present. So, after replacing the exe with 64 bit exe, the problem was solved.
Thanks for the help provided above..
Regards,
Sanjeev

Issue while loading berkeley database

Similar Messages

Maybe you are looking for