Issue while installing fresh Windows XP on Tecra 9000

I have a Tecra 9000 running Linux.
I would like to Install windows XP but the Installation CD I have loads drives and then locks up at windows is loading screen. I don't have any recovery or driver disks for this computer as I bought it used. and I don't know why it is having trouble.
The SN for the unit is Z1086914G ST900-0.
I have been reading forums on similar problems and think it might be the chipset driver for the HDD.
I cannot find a driver for this anywhere so I cant try that line of thought.
Does anyone have any Ideas.

My goal was to install windows as a stand alone os on this laptop so that my child could use it to write his high school English papers on ms word. Although linux is installed I was perfectly willing to let windows reformat the disk and install itself. On the tecra 9000 you push f12 and chose boot from cd the windows xp installation program does its thing with hardware detection installs drivers and proceeds to windows start-up. At this point it should go to a splash screen and give me the choice to format the hard drive and install windows but it locks up and will not get to that step. I don't get a windows splash screen just the blue start-up screen. it doesn't give me any errors. so I don't know what is happening.

Similar Messages

  • My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X 8 from internet, is there any where can I get offline download of OS.

    My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.

    Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
    When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
    So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.

  • Issues while installing powershell V3.0

    Hello Folks,
    I am facing issues while installing powershell V3.0 on Windows 7 ultimate x64 machine.
    It is throwing error as "The update is not applicable to your 
    computer." when I double click Windows6.1-KB2506143-x64 file.
    Have checked that it have powershell V2.0 builtin in windows 7 and working as expected.
    Have installed .NET framework 4.0 Full, then reinstalled 
    again rebooted machine.
    Have tried with .NET framework 4.5 Full, still issue persists.
    tried below workaround suggested on a forum:
    start /w %SystemRoot%\system32\pkgmgr.exe /ip /m:Windows6.1-
    KB2506143-x64.cab through CMD
    IT returns error as:
    Operation failed with 0x80070003
    The system cant find the path specified
    I am not able to figure out what exactly is going wrong.
    Could someone please jump in to help ?
    Thanks

    Hi RajendraP,
    Please also make sure Windows 7 Service Pack 1 (SP1) must be installed as a prerequisite on computers running Windows 7. To install SP1, go to
    http://windows.microsoft.com/installwindows7sp1
    Windows Management Framework 3.0 requires Microsoft .NET Framework 4.0. You can install Microsoft .NET Framework 4.0 at
    http://go.microsoft.com/fwlink/?LinkID=212547
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows Installer 4.5 Error while installing in windows 2008 32 bit

    In windows 2008 server (standard edition), i am trying to install the exchange server 2007 sp2 before that i need to install the windows installer 4.5 to install my exchange server 2007sp2, while installing the windows installer 4.5 system showing the error
    message as " Not enough storage is available to process this commend".
    If any one pls give some suggestions as soon as is appreciative.
    [email protected]
    thanks
    Shahul Hameed

    Hi,
    The error message occurs if you are trying to use a private and undocumented SetupAPI function that isn’t supported in Windows Server 2008. Please
    visit the following link for detailed information:
    Misleading error message when you install an update package in Windows
    Vista or in Windows Server 2008: "Not enough storage is available to process this command"
    Please download the right version of Windows Installer 4.5 for Windows Server 2008 x86, you can download it from the following link:
    Windows Installer 4.5
    Best Regards
    Dale
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

    Hi,
    I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
    Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway,  I would greatly appreciate some help on this matter.
    [1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
    Thanks and Regards,
    Prabath Abeysekara
    Edited by: 829281 on Jan 18, 2011 7:52 PM

    Hi,
    Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
    Here's how I got rid of it.
    Addressing all the facts one by one,
    1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
    by removing all the configuration files that were previously created while installing
    the product. The following command can be used to accomplish that task.
    *$ dpkg --purge oracle-xe*
    2.Next, Initially the password I used during the configuration process was "admin".
    Although I tried a couple of times installing the product providing the aforementioned
    password, the web UI kept prompting "Invalid Credentials" message not allowing me
    to login. But, this particular issue could be avoided by giving some other simple
    password.
    Finally, got it working and once again thanks a bunch for taking the burden of
    replying this thread.
    Cheers,
    Prabath

  • Pacman Download DB issues while installing

    Hey,
    So I'm new to any type of Linux, but I thought I'd try arch out since many people recommend end it to me.
    I'm in the install shell from the livecd and whenever I try to pacman -Sy to get the databases, they download full speed for a second then the DL speed just keeps dropping until the download cancels saying that it was too slow (less than 1b per 10secs). I've seen people post similar problems on here but none of their solutions worked for me.
    Any help would be obliged,
    -Cynthia
    (I'm on my phone typing this BTW)
    Last edited by Cynthia (2014-01-16 04:46:34)

    for clarity :
    Are you doing that while booting from the livecd, or booting from the minimal base system installed on your harddrive ?
    If from the hdd : Which guide did you follow for installing and were there network problems during the install ?
    Edit :
    just realised your topic title says issues while installing.
    Are you following https://wiki.archlinux.org/index.php/Beginners%27_Guide or another guide ?
    Last edited by Lone_Wolf (2014-01-16 10:42:16)

  • Issue while Installing Oracle Data Access Software for Windows

    All,
    Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
    It shows
    The Specified Key key was not found while trying to GetValue
    * Stop installation of all Products
    * Stop installtion of this componenent only.
    Kindly let me know why this error is showing up.
    Regards
    Ramesh

    Most probably you have hit this issue:
    "If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
    As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
    ~ Madrid.

  • Issue while installing idm 8.1.1 gateway on 64 bit windows 2008 R2

    Hi
    We have issue in installing idm 8.1.1 gateway on 64 bit windows 2008 R2
    C:\Program Files (x86)\IDM\gateway>gateway -i
    An error occured while trying to install the service: Input/output error
    Sun notes: if you're running 64-bit Windows 2008, you need the JDKTM Version 6 Update 12 and later.
    But this java version should be there in Gateway server(windows 2008) or idm installed server?
    We don't have java installed on gateway server. is this causing issue?
    please let us know
    Thanks

    I may have found a workaround. Can you try to change the "compatibility mode" in 2008 R2 to "Windows XP SP3" and see if it will install?
    Admittedly I have not done this myself so I'm not entirely sure where or how it's done, but I have confirmation it resolves the issue from others who have faced it.
    Edited by: user12611524 on May 2, 2011 5:11 PM

  • I have Windows 8.1 standalone updates. I want to install them automatically while installing fresh copy of windows 8.1. How?

    I have downloaded Windows 8.1 standalone updates from Microsoft Download Center. I don't want them to be separately installed on Windows 8.1 Copy. I want to keep the updates somewhere in Windows 8.1 setup USB/DVD so that while installing using that USB/DVD,
    the updates should be automatically installed.

    Hi,
    Operating system package-servicing commands can be used offline to install, remove, or update Windows® packages provided as cabinet (.cab) or Windows Update Stand-alone Installer (.msu) files.
    Dism /Image:C:\test\offline /LogPath:AddPackage.log /Add-Package /PackagePath:C:\packages\package.msu
    Details you can refer to:
    DISM Operating System Package Servicing Command-Line Options
    http://technet.microsoft.com/en-us/library/hh825265.aspx
    Kate Li
    TechNet Community Support

  • Facing Issue while Installing SOA server for setting up BPM11g working environment

    Hi All,
    I have been able to install Database and Weblogic Server but I am facing issue in installing SOA server.
    I am trying to install it for running BPM 11g application.
    I saw the same problem has already been answered but available solutions are not resolving my problem.
    Error Message:Provide the JDK/JRE location while launching the installer.Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path>parameter(s).
    I tried both way for initializing the installation. i.e directly through setup.exe and by command prompt but in both the cases I am getting same error.
    It is not asking for Java path in command prompt also.
    a)In my system java 7 is installed.
    b)I have used Oracle Database 11g instead of XE
    Can this be the reason?
    I checked Program Files:
    jre7 and jdk1.7.0_45 are there.
    I also have set JAVA_HOME in environment variable as C:\Program Files\java\jre7
    path :C:\Program Files\java\jdk1.7.0_45\bin
    Please help me in fixing this as I am stuck in this installation from last few days.
    Thanks!

    Hi Binay,
    You might want to consider instead installing it using JDK 1.6.
    Here's where you can check the Fusion Middleware configurations:  http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
    It's buried in there, but bottom line is that Oracle BPM 11g (PS6) 11.1.1.7 needs JDK 1.6 (for Windows it is either JDK 1.6.0_35 or JRockit 6 Update 37 R28.2.5+) and I'd suggest you use JRockit.
    Dan

  • Issue while installing FatWire on weblogic server

    I was trying to install CS with Weblogic as the Application server.
    During the installation of CS, I faced an issue while integrating with LDAP. In log it showed "Could not connect to the application server.Error in creating LDIF file.
    I had given the valid credentials.
    Have anyone faced this issue previously, if so please guide me thorugh.
    And also, Is it mandatory to use LDAP ?
    Thanks,
    Rahul Nair

    It sounds like the application server was turned off whilst you were running the LDAP configuration tool. The tool needs the application server to be running.
    It's not mandatory to have LDAP integration with CS, from what I have seen most existing customers don't use it. There are also some performance benefits to avoiding LDAP integration.
    If you do want LDAP integration then you don't need to configure it immediately after install. The LDAP configuration tool can be run separately, e.g. after you are happy the fresh install is working as expected.
    Phil

  • OSD - Install fresh Windows 7 but keep the old XP file system

    Hi, I'm just wondering if anybody out there has any experience with what I am trying to do:
    We are upgrading all of our WinXP machines to Win7. We are using SCCM OSD to push out the OS Image. I'm wondering if it is possible for my task sequence to take the existing data on the C: drive and move it to a newly created D: partition, leaving the C:
    partition blank. Then, Windows 7 can be installed fresh on the C: partition, but all of the XP data is not wiped out.
    I can't quite wrap my head around this to see if its possible. I'm using SCCM 07 without MDT.
    Management is very concerned about possible user data loss, so this could be a way to appease them.
    Thanks in advance.

    It might be possible, but it's nothing I've heard of anyone doing before so you're probably on own on how to accomplish it. MDT does include the ability to create a backup WIM of the drive though which is probably a much better option.
    The main problem with either approach though is how do you know if you have enough disk space to do this locally? What happens when you don't?
    A couple of questions for your "management":
    - If they are so concerned about user data, why do they let the users keep the data local in the first place? Sorry, but they are contradicting themselves on this one.
    - What happens if a local hard drive crashes today? Once again, this is in stark contrast to what their *new* requirement is.
    Ultimately, if management is truly concerned about user data, then they should invest in a solution to maintain user data integrity all the time, not just during the upgrade. If they are not willing to invest in a solution such as this, then their requirement
    isn't as important as they think that it is.
    Between USMT and user guidance to ensure all critical data is within their My Documents folder, most organizations are able to successfully migrate their users off of XP without any issues or data loss. 
    Jason | http://blog.configmgrftw.com

  • BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit

    Hi
    We have  windows 2008 enterprise edition 32 Bit SP2 , While installing  BO 3.1 SP2 we are getting the following error.
    "Some files could not be created.
    Please close all applications, reboot Windows and restart this installation."
    1.we do have enough space as well as we are installing it through administrator account.
    2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
    3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
    4.We dont have any firewall connected and windows firewall is off.
    Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
    Because In the download site there is Windows Server on IA32 32-bit.
    is it the correct version?
    Please help us to solve this problem
    Thanks

    We have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
    Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
    "Failed to get the document information. (LO 26315)  A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)".

  • Facing issue while installing SAP 4.7 EX2

    Hello,
    While installing DB instance for SAP 4.7 facing issue...
    ERROR 2009-12-16 17:21:07
    FSL-06002  Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\D60\SYS\exe\run/brconnect ...).
    I 'm stuck in runnign Update Database statistics step..any help is really appreciated..

    user logged in has got Administrator right. Also do we need to log in with sidadm for installing DB instance or administrator user is sufficient?
    Please find more detail logs....
    we are getting error--ERROR 2009-12-16 17:21:07
    FSL-06002  Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\D60\SYS\exe\run/brconnect ...).,
    Getting error, when we are using BRtools 6.4
    ERROR 2009-12-16 19:28:41
    CJS-00288  Could not update database statistics.<br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPD60 returned 3.<br>SOLUTION: See brconnect.log for details.,
    when we are using latest tools of Br 7.0
    Also r3trans is failing...reason is ERROR => Cannot connect: TNS-name missing
    Any advice...i have also added parameter dbs_ora_tnsname

  • Issue while installing

    HI All,
    I am getting this error while installing.
    I tried to modify the task file by changing from err to ign.The problem is that the taks sapview.tsk contains many entries i cannot change one and then try sapinst because i dont know what all views were created.Is there a way to check all the views created in the system.
    I have changed from err to ign as it is a view and no data in it.How can we find out what all views are created.Thanks.
    DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) ERROR: DDL statement failed
    (CREATE VIEW "/BI0/MINFOPROV" ( "INFOPROV" , "OBJVERS" , "CHANGED"  ) AS SELECT T0001."INFOPROV", T0001."OBJVERS", T0001."CHANGED" FROM "/BI0/PINFOPROV" T0001)
    DbSlExecute: rc = 102
      (SQL error 955)
      error message returned by DbSl:
    ORA-00955: name is already used by an existing object
    (DB) INFO: disconnected from DB
    /usr/sap/ONW/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/ONW/SYS/exe/run/R3load: END OF LOG: 20111123090308

    Please make sure you have all the views created else there will be issues in the system . These even though are only definitions , but are extremely important as they are referenced.
    Some of the views have been created , so its not able to create a duplicate view in the SAP schema.
    What you can do is change all the status to err in SAPVIEW.TSK and retry with the import.
    That should drop and re-create all the views.
    You should not manually change .TSK files unless you are very confident of the consequences .
    Edited by: Ratnajit Dey on Nov 24, 2011 9:20 AM

Maybe you are looking for