Issue while removing stock using MB1C - 562

Hi,
Our client has few materials for which batch number is captured in small alphabets and now when we are trying to remove stock using MB1C - 562 system gives error of Deficet Qty as it automatically changes small letters to CAPITAL letters as soon as we press enter on MB1C. We are doing stock removal activity as client is migrating from old SAP system to ECC and we have to remove stock data from old system.
We are using an ABAP program for removing stock but in background it uses MB1C - 562 mvt type but for few materials we are getting this issue of small letters.
Please let me know if there is any way we can remove these stock records with small letter batch number via 562 mvt type
Thanks,
Vihaan

As I already said: no matter what movement type you use, you cannot make SAP posting this batch number.
Find out the way how this stock was posted into SAP. and use the same way to get it off SAP.
I think you have to convert the batch number into capital letters before you can goods issue the stock. For this you may need to create an own report that does a hard update in SAP tables MCHA, MCH1 and MCHB (maybe more ... I cant look into your system, you may have to contact SAP to get help which tables need to be amended or which conversion exit needs to be switched off)

Similar Messages

Error while uploading stock using Mb1c and migo

Hi
Following error is showing,while uploading stock using Mb1c and migo
Return code 8 is not permitted with BAdI 'FAGL_PERIOD_CHECK'
Can anyone help me?/
Thanks

Hi
You will need the help of an abaper in solving this , as a BAdi FAGL_PERIOD_CHECK - Posting Period Check has been activated.
Please check the implementation of the BAdi , i feel that it has not been implemented properly.
This Business Add-In (BAdI) enables you to extend the existing check of open posting periods.
The result of the period check is provided to you as a parameter (CH_SUBRC). In your implementation, you can derive this parameter again (for example, if a posting is rejected under a certain condition).
The following values are allowed for parameter CH_SUBRC:
0 Posting allowed
4 Period & is not open for account type & and general ledger &
6 No authorization for posting period & &
This is a custome developemnt , so only the ABAper present at your end will be able to resolve it.
Thanks & Regards
Kishore

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

SAP posting period error while mainting stock in MB1C

Hi,
Error Description:-
While I am maintain the stock in MB1C i got an error i.e.
Error:- Postingonly possible in periods 2006/12 and 2006/11 in company code CLC1 ( CLC1 is mycompany code.)
To resolve this error I did some pre-requisite,
First :- In OB29, I define my fiscal year variant ( Here, I copied the K4 andrename S4 and save )
Second :- then, in OB37, I Assign fiscal year variant to company code.
Third :- I define variant for open postingperiod, ( Here, I define my ownvariant to use the following menu path - IMG-- FAFinancialaccounting global settingsDocuments-- Posting periods--Define variant forposting periods).
Forth:- in OB52, i define the open and close posting periods ( Here, in new entries i choose my variantwhich i define in 3rd step and define myperiods).
still system not allowing me the current dated posting, then i use the following step to resolve the error,
I mgoing to MMPV for close the periods. (here I closed all periods, month wisetill 2012/01).
stilli got the same error, so Icheck MMRV & OMSY, weather postingperiods change or not.. ( Here, systemshows me backdated posting periods i.e. 2006/12).
Kindly help me to resolve this error.
reg.Mayur

Hi,
As you Said i closed each period as well as fiscal year , but still my problem not resolved .. system shown me following notification after i closed the period..
Mode: Close period only
Client:800
Period entered (month/year):042010
Invalid period for company code CLC1; no conversion here.
Period closing complete; log issued.
Mode: Close period only
Client:800
Period entered (month/year):012012
CoCd CLC1: table T009B incomplete; no conversion here.
Period closing complete; log issued.
Mode: Close period only
Client:800
Period entered (month/year):022012
Incorrect period in control rec. of CoCd CLC1; no conversion
The current period (month/year) of the control record is122006
Period closing complete; log issued.
E N D

Issue while generating report using web.show_document with https

Hi All,
I am facing some issue while seeing the report using web.show_document as shown below:
https://ucrmskr.apac.nsroot.net:10301/forms/html/001725032_gca.rtf_
In this case the report opens directly without asking for me to save or open or cancel option
whereas if I hit
http://scrmskr.apac.nsroot.net:7801/forms/html/001725032_gca.rtf_
it asks for save or open or cancel option
so that I can save the report to my machine and open in wordpad format
The report generated in the first case is not coming in proper format
Below are my forms.conf mappings:
# Name
# forms.conf - Forms component Apache directives configuration file.
# Purpose
# It should include the weblogic managed server (routing) directives for
# the servers where Forms applications are deployed and other miscellaneous
# Forms component OHS directives.
# Remarks
# This file is included with the OHS configuration under
# $OI/config/OHS/<OHS Node Name>/moduleconf sub-directory.
# virtual mapping for the /forms/html mapping.
RewriteEngine on
RewriteRule ^/forms/html/(..*) /workaroundhtml/$1 [PT]
AliasMatch ^/workaroundhtml/(..*) "/ucrmap1/weblogic/bea/ucrms/config/FormsComponent/forms/html/$1"
RewriteRule ^/ucrms/icons/(..*) "/workaroundicons/$1" [PT]
AliasMatch ^/workaroundicons/(..*) "/ucrmap1/weblogic/bea/ORA_PFRD/forms/java/$1"
RewriteRule ^/forms/help/(..*) "/workaroundhelp/$1" [PT]
AliasMatch ^/workaroundhelp/(..*) "/ucrmap1/ucrrgbg2/help/$1"
<Location /forms>
SetHandler weblogic-handler
WebLogicCluster kauh0079:9001
DynamicServerList OFF
</Location>
Please let me know what needs to be done additionally if we are trying to hit https because in the second case we were hitting http with similar mapping in diff environment and it was generating report successfully.
Regards,
Harish

Thanks for answering,
I changed the URL from
http://nbotlaguduru.dms.local/export/FMSLaborChargesalcs20060829132645.pdf
to
http://nbotlaguduru.dms.local:8889/export/FMSLaborChargesalcs20060829132645.pdf
and the same problem occured
the file is located on my local C drive in:
C:\lcs\export
seems as though I am missing something else as well
any ideas?

Error while receiving Item using MB1C.

I get the following error message while receiving Item using T-Code MB1C.
Accounting Data not yet maintained for Material NPPL 2707.
Not sure which setup is missing. Can somebody please help?

Dear Nitesh Patil,
After we do a posting, the changes need to be reflected in FI and since your material master does not contain the accounting 1 and accounting 2 views you are getting this problem.
To rectify, go to MM01 > give the same material name for which you are getting this problem > select accounting 1 and 2 views and fill up the required data.
Hope this helps.
Thanks
Murtuza

Issue while starting AdminSerever using wlst commands

Hi, I am facing issue while trying to start the AdminServer and Managed Server via nodemanager using wlst commands. I have installelled WebLogic 11g on windows 2008 R2. Mentioned below are the steps that I followed:
1) In Nodemanager.properties files I set following parameters to true. I did this, so that nodemanager can start the server in case of crash.
CrashRecoveryEnabled=true
StartScriptEnabled=true
2) started nodemanager and then started AdminServer from the command prompt as follows:
nmConnect('weblogic','password','10.23.226.58','5556','IMDomain','E:\Oracle\Middleware\user_projects\domains\IMDomain','ssl')
nmStart('AdminServer')
I dont see any errors but it seems the AdminServer do Not start properly as in the cmd window I don't see any 'started successfully' message - the message remains as *"Starting AdminServer..."*
However in the adminServer logs I see that the status is Running (refer logs at the end) and I can also see it as Running in weblogic console.
I really didnt care if its not giving a success message in cmd window but the problem occurs when I start the managedServer. After starting the managed server in about 10 minutes, there is a stuck thread. (I guess it is 10 mins because Stuck Thread MaxTime value is 600).
If I set StartScriptEnabled=false, and start by directly running the startweblogic.cmd then it works fine.
I am struggling with this for last 1 week, appreciate any help.
LOGS.......
Starting WLS with line:
E:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.xml.stream.XMLInputFactory=weblogic.xml.stax.XMLStreamInputFactory -Dweblogic.security.SSL.nojce=true -Xverify:none -da -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dwli.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\integration -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=E:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;E:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sysext_manifest_classpath weblogic.Server
<Mar 14, 2012 3:16:30 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Mar 14, 2012 3:16:30 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Mar 14, 2012 3:16:30 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.2-b06 from Sun Microsystems Inc.>
<Mar 14, 2012 3:16:31 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Mar 14, 2012 3:16:32 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Mar 14, 2012 3:16:32 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Mar 14, 2012 3:16:32 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\IMDomain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Mar 14, 2012 3:16:36 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 14, 2012 3:16:37 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Mar 14, 2012 3:16:37 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Mar 14, 2012 3:16:39 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
Mar 14, 2012 3:16:39 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.227.211.13:8001 for protocols iiop, t3, ldap, snmp, http.>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "IMDomain" running in Production Mode>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\PROGRA~1\Java\JDK16~1.0_2\jre\lib\security\cacerts.>
<Mar 14, 2012 3:20:53 PM CDT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 14:12:27 CST 2002,
               To: Tue Mar 22 15:12:27 CDT 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 15, 2012 11:41:41 AM CDT> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "650" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@68a3f7ed", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:129)
weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
java.io.InputStream.read(InputStream.java:85)
com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
com.certicom.tls.record.ReadHandler.read(Unknown Source)
com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
java.io.InputStreamReader.read(InputStreamReader.java:167)
java.io.BufferedReader.fill(BufferedReader.java:136)
java.io.BufferedReader.readLine(BufferedReader.java:299)
java.io.BufferedReader.readLine(BufferedReader.java:362)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:102)
weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:47)
weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<Mar 15, 2012 11:42:41 AM CDT> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "710" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@68a3f7ed", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:129)
weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
java.io.InputStream.read(InputStream.java:85)
com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
com.certicom.tls.record.ReadHandler.read(Unknown Source)
com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
java.io.InputStreamReader.read(InputStreamReader.java:167)
java.io.BufferedReader.fill(BufferedReader.java:136)
java.io.BufferedReader.readLine(BufferedReader.java:299)
java.io.BufferedReader.readLine(BufferedReader.java:362)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:102)
weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:47)
weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>

Hi chamila,
    I never tried the example. Exception is not clear. Could you please post more stack trace from log files.
Thanks,
Sham

Issue while Removing a role

Hi,
Here is my scenario.
User 'test1' is created by assigning a role (say A). Role A has AD and database table resource assigned, so there are 2 resources assigned to the user i.e. AD and a database table resource. (This is the exisitng process, I cannot change this process at all).
Now while removing the role, my requirement is to delete only AD resource account and it should not try to delete the database table resource account. Is there a way to do this?
Please share your ideas.
Thanks in advance.

Do you only want to keep the ressource account or also keep the link? If you want to keep the link, do what the previous poster suggested. If you only want to prevent the deletion of the database row, you can configure this in the database table resource adapter by deactivating the capability to delete accounts.

Goods Issue of consigmnent stock using MIGO

Hi Guru's,
I have configured stock determination group, rule header and iteam for consigment material. I have also assigned Stk. Deter. Rule in the Applications but am still unable to issue from consignment stock in my warehouse.
I have reservation and want to issue to 261K allowing the system to show that this is consignment stock and the vendor.
I have been able to do this in MB26 Pick List however I am still not able to do this in MIGO-GI. Stock determination icon is grayed out in MIGO-GI.
Any help is greatly appreciated.
thanks
Diane

Hi Csaba,
Thanks for your reply... I have this config already set up and I still have the issue with icon grayed out. I cannot determine consigment stock from vendor. My settings for mtce plant includes the oper 4 check during picking.
I have:
Stock determination group assigned to my plant with the following:
Rule 2000 Consume consignment, then own
Priority indicator is1 for K, 2 for F unrestricted own stock
Also movement 261 is configured for production order to consume consignment, then own.
any ideas?
Regards and thanks for your time.
Diane

While creating stock using tcode: mb1c

THE ERROR : "POSTING PERIOD 001 2012 IS NOT OPEN"
how to resolve the above ticket
Edited by: b.sasibhushanam on Jan 10, 2012 12:46 PM
Moderator message:
Locked. Reason: basic question which has been discussed many times....
Please try to search and find answer on your own. If you cannot, please come back by providing a correct description of your problem.
And please use capitals properly.
Please also read forum rules.
Edited by: Csaba Szommer on Jan 10, 2012 8:34 AM

Hello Sir,
Please change the Period using the current date in the T-Code MMPV.
Regards,
Yawar Khan

Error -while updating stock in MB1C for make to order (561-E)

Hi all,
I have created a sales order with reference to quotation.
Stock is updating for Quotation number. But i stock should be updated to the sales order number.
When i am updating the stock for this sales order number, its not accepting. Its asking the preceding number.
system shows the following error,
"Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 10000001 and item 000010. Therefore, the settlement and possibly inventory management are carried out using the number of the preceding document.
System Response
This entry is not allowed.
Procedure
Enter the document and the item number of the preceding sales document."
Can anyone tell me how to solve this issue?
Thanks in advance,
Babu

solved

Issue while doing Segmentation using Relationship Category

Hello Experts
We are implementing SAP CRM Lean Marketing using CRM 7.0. We are implementing segmentation, mail forms and using "Follow-up Processing of Target Group" functionality to send e-mail/fax to the BPs in target group. We are not using Campaigns. The "Follow-up Processing of Target Group" functionality provides facility to send bulk mail by using the available "Export to Channel" function from the opened target group itself.
Our business requirement is to do segmentation based on Company attributes and Relationship Category. The output of the target group should enlist the persons related to the Company based on the relationship category selected while doing the segmentation. e.g. While doing segmentation if I have selected company attributes Industry Sector of companies as Agriculture, company type as Partnerships and selected relationship category Has Supplier, then for the Companies matching the segmentation criterion, the target group should enlist all the persons related with the company with relationship category Has Supplier. As a further step the e-mail/fax will be sent to all these persons
As per my understanding using standard InfoSet CRM_MKTTG_BP_ORG_CDE and while creating data source selecting BUT000_PER-PARTNER_GUID in the field business partner, I am able to get the list of persons matching the segmentation query as documented in the example above. But the issue is , the output of the target group only enlists matching Persons, it does not enlist the matching company ID /name in the output of the target group. So business is unable to understand the Person enlisted belongs to which Company.
We tried enhancing the output of the target group in order to add Company ID/ Name , but the issue is the BADI gets Input as persons BP id, nothing else, due to this if a person is having relationships with multiple companies, the BADI is unable to identify which company to choose as Relationship Category is not available to the BADI. And further issue is if a Person is having same relationship category with 2 companies e.g. Supplier for company A and for Company B too , in this case too the BADI is unable identify correct Company to return to the target group output.
Highly appreciate your early response in order to resolve this critical issue.
Thanks
Ambar

Hello Experts,
Elaborating the issue further
Using standard InfoSet CRM_MKTTG_BP_ORG_CDE and while creating data source selecting BUT000_PER-PARTNER_GUID in the field business partner, I am able to get the list of persons matching the segmentation query as documented in the example above. But the issue is , the output of the target group (shown as an ALV grid , when the target group is opened) only enlists matching Persons, it does not enlist the matching company ID /name in the output of the target group. So business is unable to understand the Person enlisted belongs to which Company. Can we enhance this ALV grid output of the target group ? if yes , how can it be achieved ?
As an alternative we tried implementing the BADI CRM_MKTTG_SEG_MEM_EX , that is used to define data export from the target group. But the BADI gets Input as persons BP id, nothing else, due to this if a person is having relationships with multiple companies, the BADI is unable to identify which company to choose as Relationship Category is not available to the BADI. And further issue is if a Person is having same relationship category with 2 companies e.g. Supplier for company A and for Company B too , in this case too the BADI is unable identify correct Company to return to the target group output.
Any suggestion solution to resolve this issue. Appreciate your early response.
Thanks
Ambar
Edited by: AMBAR ADHAV on Sep 10, 2011 11:00 AM

Facing issue while handling faults using fault-policies.xml

Hi All,
Scenario: One Asynchronous Bpel is trying invoke the webservice. When the status of the webservice is "Down", the BPEL will throw "System fault : remoteFault"
This fault will be handled by the fault-policies.xml.
CustomFaultHandler.java : basically it will print data to audit-trail and send data to the JMS Queue.
I am facing some issues , when i am trying to handle faults using fault-policies.xml.
Issue1: Display warning message at time of deployment : Warning: Schema validation failed for fault-policies.xmlXML-24506: (Error) Identity constraint validation error: 'Key sequence not found in key reference'
Issue2: CustomFaultHandler.java is able to print data to audit-trail but unable to send data to the Queue. and why the policy file getting executed at time of "Start of Invocation" and then it's showing "Invocation faulted" ?
Audit-Trail Message:
*===========*
Started invocation of operation "process" on partner "RemoteService".Started invocation of operation "process" on partner "RemoteService".
[Fault Recovery] Invoked handleBPELFault on custom java action class "com.CustomFaultHandler".
Invoke1
190002190002
default/TestjavaAction!5.0*soa_fcb2a5dd-06a7-47f9-bb88-cab14d343856/TestBPEL
190002
Faulted while invoking operation "process" on provider "RemoteService". Faulted while invoking operation "process" on provider "RemoteService".
fault-policies.xml:
*==========*
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1" id="ErrorHandlingModelr"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-java"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-java">
<javaAction className="com.CustomFaultHandler"
defaultAction="ora-terminate">
<returnValue value="Manual" ref="ora-abort"/>
</javaAction>
</Action>
<Action id="ora-abort">
<abort/>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
fault-bindings.xml:
*===========*
<?xml version="1.0" encoding="windows-1252" ?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<component faultPolicy="ErrorHandlingModelr">
<name>TestBPEL</name>
</component>
</faultPolicyBindings>
Warning Message when trying to deploy the composite to the server :
=============================================
Warning: Schema validation failed for fault-policies.xmlXML-24506: (Error) Identity constraint validation error: 'Key sequence not found in key reference'
Error Message from server:
*==============*
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Fault not handled.
failure to handle a fault thrown from a scope, by any blocks in the scope chain.
This exception occurred because the fault thrown in the BPEL flow was not handled by any fault handlers and reached the top-level scope.
A top-level fault handler should be added to the flow to handle faults not caught from within the flow.
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Fault not handled.
failure to handle a fault thrown from a scope, by any blocks in the scope chain.
This exception occurred because the fault thrown in the BPEL flow was not handled by any fault handlers and reached the top-level scope.
A top-level fault handler should be added to the flow to handle faults not caught from within the flow.
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:205)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at com.collaxa.cube.engine.dispatch.Dispatcher$ContextCapturingThreadFactory$2.run(Dispatcher.java:850)
at java.lang.Thread.run(Thread.java:662)
Please help..
Thanks in Advance
Edited by: Sharmistha Ghosh on May 16, 2012 12:37 PM

My SOA suite version is 11.1.1.7 and i was getting the same warning while compiling the Composite in JDeveloper. To fix it update your fault-policy.xml
Change it to
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <faultPolicy version="0.0.1"
                 id="BPELProcessV1_Faults"
                 xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
                 xmlns:xs="http://www.w3.org/2001/XMLSchema"
                 xmlns="http://schemas.oracle.com/bpel/faultpolicy"
                 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
And it will solve the issue.

Issue while sending mails using classes

Hi Experts ,
i have one issue when i try to send mails using classes cl_document_bcs,cl_cam_address_bcs,cl_bcs etc
ISSUE :
i put some data in selection screen and i get some output ( say i got 5 records), i select 3 records and press some button to trigger mail and mail is send, and now again the OUTPUT screen is shown with sended records but we can not send these records again ............ now i selcect remaining two records and press button to trigger mail and THIS TIME MAIL IS NOT SEND.
amd my code is :
CREATE OBJECT l_document.
CREATE OBJECT l_recipient.
TRY.
      cl_bcs_convert=>string_to_solix(
      EXPORTING
      iv_string = fp_wa_output
      iv_codepage = fp_v_code_page
      iv_add_bom = 'X'
      IMPORTING
      et_solix = l_wa_output_binary
      ev_size = l_v_size ).
      l_send_request = cl_bcs=>create_persistent( ).
*-->Creating Document
      l_document = cl_document_bcs=>create_document(
      i_type = 'RAW'
      i_text = fp_it_content[]
      i_subject = fp_text_48 ) .
*-->Adding Attachment*
      CALL METHOD l_document->add_attachment
        EXPORTING
          i_attachment_type    = fp_text_049
          i_attachment_size    = l_v_size
          i_attachment_subject = fp_v_file
          i_att_content_hex    = l_wa_output_binary.
*-->Add document to send request*
      CALL METHOD l_send_request->set_document( l_document ).
*    do send delivery info for successful mails
      CALL METHOD l_send_request->set_status_attributes
        EXPORTING
          i_requested_status = 'E'
          i_status_mail      = 'A'.
*-->Get Sender Object
      l_uname = sy-uname.
      l_sender = cl_sapuser_bcs=>create( l_uname ).
      CALL METHOD l_send_request->set_sender
        EXPORTING
          i_sender = l_sender.
      LOOP AT fp_s_mail INTO l_wa_mail.
        l_v_objid = l_wa_mail-low.
        l_v_mail = l_v_smtpadr.
        TRANSLATE l_v_mail TO LOWER CASE.
        l_recipient = cl_cam_address_bcs=>create_internet_address( l_v_mail ).
        CALL METHOD l_send_request->add_recipient
          EXPORTING
            i_recipient = l_recipient
            i_express    = 'X' .
*            i_copy       = ' '
*            i_blind_copy = ' '
*            i_no_forward = ' '.
      ENDLOOP.
**-->Trigger E-Mail immediately*
*      IF fp_send_all EQ 'X'.
*        l_send_request->set_send_immediately( 'X' ).
*      ENDIF.
      CALL METHOD l_send_request->send(
      EXPORTING
      i_with_error_screen = 'X'
        RECEIVING result = l_v_sent_to_all ).
      BREAK TARK.
      IF l_v_sent_to_all = 'X'.
        MESSAGE i000 .
      ENDIF.
    COMMIT WORK.
    CATCH cx_document_bcs INTO l_bcs_exception.
    CATCH cx_send_req_bcs INTO l_send_exception.
    CATCH cx_address_bcs INTO l_addr_exception.
    CATCH cx_bcs INTO l_exp.
ENDTRY.
thanks in advance
rahul

Every time when i choose other network or dongle to send those mails it gets sent.
As per the description, seems it's an issue related to this specific network. Probably, they've adjusted their security policy, like blocked some port numbers, etc.
You might need to contact the support of your ISP to confirm what SMTP settings you need. Check port number, and security settings.
By the way, this is the forum to discuss questions and feedback for Windows-based Microsoft Office client. Since your query is directly related to
Office for mac, I would suggest you to post in the forum of
Office for Mac, where you can get more experienced responses:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Issue while installing WCS using omii.ini: Database ping failed

Hi,
I am trying to install WCS on local linux VM. I am following the document 'Oracle WebCenter Sites: Installing on Oracle WebLogic Application Server".
Following are the things I have been able to do successfully:
Install Oracle DB, create a database and then create a user for this database
Install WebLogic server, create domain, create admin server, managed server, and finally create a datasource. THe datasource connection to the DB created in step 1 above is successfull.
I downloaded the WCS installer from Oracle Website 'WebCenterSites_11.1.1.6_bp1'. I am installing using silent installer using omii.ini file.
During installation, on receiving the prompt to install CS and CAS applications, I installed them successfully via WebLogic console.
I tested the URL 'http://localhost:7001/cs/HelloCS' and it showed me the Oracle WCS 11g page.
Now, when I go back to the wcs installation terminal and hit Enter, it gives following error:
[2013-07-11 01:32:21.861][CS.INSTALL][INFO] 1. If your platform requires you to manually deploy the Sites application, deploy Sites now. Otherwise, continue with step 2 2. Restart your application server. 3. Test the URL http:////HelloCS to see if application is deployed successfully 4. If the test is successful, press ENTER. URL http://localhost:7001/cs/HelloCS [2013-07-11 01:41:16.841][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Testing user configuration and database connectivity. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.postURL: PostURL success for http://localhost:7001/cs/HelloCS [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Web Server and Application Server Configuration test finished successfully. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Attempting to Ping the Database. [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Database Ping was attempted with WCSDataSource as the DSN. The URL that was passed in = http://localhost:7001/cs/CatalogManager. Please Check your connection and property files settings. [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Install was unable to ping the database. Installation has halted. [2013-07-11 01:41:17.461][CS.INSTALL][ERROR] Worker.run. Install failed. Please check log file. Click Yes to modify your install choices and re-try install. Click No to terminate application.
It looks like DB ping is getting failed.
But I am not sure how to resolve this error.
Please help. I am pasting the content of my bea_omii.ini file that I have used. (Please view as HTML, as formatting is getting lost on this page.)
Do let me know if any other information is required from my end.
bea_omii.ini:
#ContentServer install properties #Thu Apr 17 12:03:27 IST 2008 # Content Server Information # Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall CSInstallDirectory=/home/oracle/WCS # Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared CSInstallSharedDirectory=/home/oracle/WCS/Shared # For delivery installation set Development to false Development=true # CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster #CSInstallType=single # This is to select APPSERVER Note: PORTALSERVER is not supported CSInstallPlatformType=APPSERVER # Set the application/portal server you want to install # Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat) CSInstallAppServerType=wls92 # Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3 # on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3 CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3 # [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain # on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain # [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain CSInstallAdminDomainName=WCSDomain # Option for manual deployment (Should always be set to true) CSInstallbManual=true #Manual deployment needs to set the path where installer has to explode the war CSManualDeployPath=/home/oracle/WCS/deployment # Set the context path for your web application for example /cs/ sCgiPath=/cs/ # Set the database type Possible options #CSInstallDatabaseType= [SQL Server, DB2, Oracle10] CSInstallDatabaseType=Oracle10 # Set the data source name CSInstallDBDSN=WCSDataSource # By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster. CSInstallType=single #WEM installation IsWEMInstall=TRUE #hostname where cs is installed CASHostName=localhost # port number of cs installation CASPortNumber=7003 #Server HostName of internally accessible CAS CASHostNameLocal=localhost #Server PortNumber of internally accessible CAS CASPortNumberLocal=7003 #Server HostName where CAS is actually deployed CASHostNameActual=localhost # Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog # com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger LoggerName=org.apache.commons.logging.impl.Log4JLogger # Set the host name where the application will be running CSInstallWebServerAddress=localhost # Set the port number where the application will be running CSInstallWebServerPort=7001 # Set this property to true if you are installing Spark CSInstallSpark=false # Sample Sites Information # Set this true if you want to install Avisports sample site. Avisports=true # CS-Direct and CS-Direct Advantage properties. Please don't touch them ContentCentre=true CatalogCentre=true # Set this true if you want to install CS Engage otherwise false MarketingStudio=true # Set this to true if you want to install Commerce Connectors CommerceConnector=true # Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode FSCore=true # Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore FSEngageCore=true # Set this to true to install Store Schema. This depends on Development and FSCore FSStoreSchema=true # Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore FSEngageStoreSchema=true # Set this to true to install Document Schema. This depends on Development and FSCore FSDocSchema=true # Set this to true to install Sample Visitors. This depends on Development and FSCore FSLocalUser=true # Set this to true to install Pretty URL Package. This depends on Development and FSCore FSPrettyURL=true # Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema FSStoreDemoData=true # Set this to true to install Document Demo Data. This depends on Development and FSDocSchema FSDocDemoData=true # Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema FSEngageStoreDemoData=true # If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema FSSiteView=true # Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre FSAnalytics=true # Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre CCSampleAssets=true # Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre CCSampleAssetsBF=true # Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre MSSampleAssetsBF=true # Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre CCSampleAssetsHW=true # Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre CatCSampleAssets=true # Set this to true to install Hello World sample site. This depends on Development and ContentCentre CCSampleSiteHW=true # Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF CCSampleSiteBF=true # Set this to true to install Burlington Financial Extensions sample site. MSSampleSiteBF=true # Set this to true to install GE Lighting sample site. MSSampleSiteGE=true # Spark sample site components # Set this to true to install Document Management sample asset types DMSampleAssets=false # Set this to true to install Content Management sample asset types WCMSampleAssets=false # Set this to true to install Base Components SparkSampleSite=false # Set this to true to install Sample Data SparkSampleData=false # Set this to true to install Sample Portlets. Set this true if this is a portal server SparkSamplePortlets=false

Thanks for your reply Yct.
I got the ping issue resolved today, there was an issue in the data source. Finally I was able to complete the installation successfully.
But there is one more issue now. After completing the installation, I am trying to access the URL to get to the WCS login page, but with no success.
Below, I am mentioning few URLs that I tried, and the outcome:
http://localhost:7001/cs/HelloCS , This URL gives me a page with some static content messages like 'Welcome to Oracle WebCenter Sites 11gR1'. Then there are some text lines in blue color. I think this page is working as expected.
http://localhost:7001/cs/login , this URL automatically gets redirected to the URL 'http://localhost:7003/cas/login?service=http%3A%2F%2Flocalhost%3A7001%2Fcs%2Fwem%2Ffatwire%2Fwem%2FWelcome' and I get an error message 'Firefox can't establish a connection to the server at localhost:7003.'
http://localhost:7001/cas/login, this takes me to login page, where when I enter fwadmin@xceladmin credentials, I am taken to JASIG Central Authentication Service page, which is again static, and I can't do anything on this page
http://localhost:7001/cs/Satellite?c=Page&cid=1327351719456&pagename=avisports%2FPage%2FHomeLayout1 , this takes me to the Avisports site, which is functional
http://localhost:7001/cs/Satellite?c=Page&childpagename=FirstSiteII%2FFSIILayout&cid=1124747609916&pagename=FSIIWrapper, this takes me to he FirstSit page, which is again functional
Issue: I am not getting the main login page, where I would get 3 sites(Avisports/FirstsiteII) in the dropdown.
Looks like there is something wrong going on.
Following I am pasting my omii.ini file, if it helps:
#ContentServer install properties
#Thu Apr 17 12:03:27 IST 2008
# Content Server Information
# Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall
CSInstallDirectory=/home/oracle/WCS
# Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared
CSInstallSharedDirectory=/home/oracle/WCS/Shared
# For delivery installation set Development to false
Development=true
# CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster
#CSInstallType=single
# This is to select APPSERVER Note: PORTALSERVER is not supported
CSInstallPlatformType=APPSERVER
# Set the application/portal server you want to install
# Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat)
CSInstallAppServerType=wls92
# Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3
# on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3
CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3
# [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain
# on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain
CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain
# [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain
CSInstallAdminDomainName=WCSDomain
# Option for manual deployment (Should always be set to true)
CSInstallbManual=true
#Manual deployment needs to set the path where installer has to explode the war
CSManualDeployPath=/home/oracle/WCS/deployment
# Set the context path for your web application for example /cs/
sCgiPath=/cs/
# Set the database type Possible options
#CSInstallDatabaseType= [SQL Server, DB2, Oracle10]
CSInstallDatabaseType=Oracle10
# Set the data source name
CSInstallDBDSN=WCSDataSource
# By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster.
CSInstallType=single
#WEM installation
IsWEMInstall=TRUE
#hostname where cs is installed
CASHostName=localhost
# port number of cs installation
CASPortNumber=7003
#Server HostName of internally accessible CAS
CASHostNameLocal=localhost
#Server PortNumber of internally accessible CAS
CASPortNumberLocal=7003
#Server HostName where CAS is actually deployed
CASHostNameActual=localhost
# Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog
# com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger
LoggerName=org.apache.commons.logging.impl.Log4JLogger
# Set the host name where the application will be running
CSInstallWebServerAddress=localhost
# Set the port number where the application will be running
CSInstallWebServerPort=7001
# Set this property to true if you are installing Spark
CSInstallSpark=false
# Sample Sites Information
# Set this true if you want to install Avisports sample site.
Avisports=true
# CS-Direct and CS-Direct Advantage properties. Please don't touch them
ContentCentre=true
CatalogCentre=true
# Set this true if you want to install CS Engage otherwise false
MarketingStudio=true
# Set this to true if you want to install Commerce Connectors
CommerceConnector=true
# Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode
FSCore=true
# Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore
FSEngageCore=true
# Set this to true to install Store Schema. This depends on Development and FSCore
FSStoreSchema=true
# Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore
FSEngageStoreSchema=true
# Set this to true to install Document Schema. This depends on Development and FSCore
FSDocSchema=true
# Set this to true to install Sample Visitors. This depends on Development and FSCore
FSLocalUser=true
# Set this to true to install Pretty URL Package. This depends on Development and FSCore
FSPrettyURL=true
# Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema
FSStoreDemoData=true
# Set this to true to install Document Demo Data. This depends on Development and FSDocSchema
FSDocDemoData=true
# Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema
FSEngageStoreDemoData=true
# If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema
FSSiteView=true
# Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre
FSAnalytics=true
# Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre
CCSampleAssets=true
# Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre
CCSampleAssetsBF=true
# Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre
MSSampleAssetsBF=true
# Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre
CCSampleAssetsHW=true
# Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre
CatCSampleAssets=true
# Set this to true to install Hello World sample site. This depends on Development and ContentCentre
CCSampleSiteHW=true
# Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF
CCSampleSiteBF=true
# Set this to true to install Burlington Financial Extensions sample site.
MSSampleSiteBF=true
# Set this to true to install GE Lighting sample site.
MSSampleSiteGE=true
# Spark sample site components
# Set this to true to install Document Management sample asset types
DMSampleAssets=false
# Set this to true to install Content Management sample asset types
WCMSampleAssets=false
# Set this to true to install Base Components
SparkSampleSite=false
# Set this to true to install Sample Data
SparkSampleData=false
# Set this to true to install Sample Portlets. Set this true if this is a portal server
SparkSamplePortlets=false

Issue while removing stock using MB1C - 562

Similar Messages

Maybe you are looking for