Issue while UNDELETE the PO line item

Hi MM Sapperu2019s,
I am facing an issue where one of my user wrongly activated the deletion for 1 line item in the PO and now when I tried to undelete the PO line item it was giving me the below error,
Error as Requisition XXXXXX, item XXXX, assigned to other order account
Message no. 06251
Please help me to fix this issue.
PS:
I have found similar SDN links but where the issue is PO has linked with Sale order and in my case the PO account assignment has linked with network.
Moderator do not lock this query saying that similar issue has been already discussed
Awaiting for the experts reply.
Cheers,
Kumar.S

Is that the background to your problem:
you have a requisition and you created a PO 1 for this requisition,
then you deleted the PO 1 and requisition became open again,
then the requisition was change in account assignment
and then you created a PO 2 for this requisition.
what do you expect from re-opening the PO 1?

Similar Messages

  • Error message 'Message no. ME867' while deleting a PO line item

    Hi,
    This is a PO item without material master and account assigned to cost center.GR (101) was done and the GR is cancelled(102)for the total quantity.
    While deleting the PO line item, i am getting error message with out any description.When i check the details of the error it is showing as 'Message ME867'. Since this error is not showing any error description, i am unable to know the cause of the error.
    Please let me know what might be the cause and how can we rectify this.
    Thanks in advance
    Regards,
    Rambhupal

    Hi,
    This means ERS is active in your system.
    What this means is that when you do a GRN, an ERS flag is activated in the PO header. The ERS is then settled using the PO data in SRM.
    If you have not settled this (at least this is what is indicated from the message), then uncheck this flag in the PO header and then try and archive.
    Cheers.

  • Issue with sorting of TO line item while using LM05 / LM07

    Hi,
    We have found an issue in using LM05 / LM07 trnasactionwhile performing picking activity using the RF transaction.
    1. Transfer Order is created for the same Material and Batch Combination with multiple line items. So when we display the TO the materials appear in the sequence of TO line item say 1, 2, 3, 4, 5 etc.
    2.  When we try to confirm the transfer order using LM05 the system is not picking the line items in the order that the TO was created. It is pickinga a random line item from the order and selecting an item from the lower line items of the TO's.
    We have debugged and found that there is no specific sort sequence which is changing the sequence of line items as all the sort eliments have the same values except that there are few empty fields. The statement where the sort sequence is changing is 'SORT TMP_SORT_TAB BY NLTYP SORLP NLENR MATNR CHARG' but my concern is it is not sorting by this sequence specified in the code after execution.
    If anyone has seen this kind of an issue and has a solution please let me know.
    Thanks in Advance,
    Harish

    As for std SAP ME59N - make sure there is not rounding value is activated in the Material master as well as info record
    If this is not the case than check any custom code is activated for ME59N
    becuase generally in many compnay when they use ME59n they don't want the same material from diff PR to create the diff line item in the PO so using the custom logic in the user exist they trick the code
    it might be the case for you where you have issue.

  • Error 'Enter GL Account' while posting and invoice line item in MIRO

    Hello Gurus,
    I am facing a rather wierd issue.
    While posting a PO invoice in Tcode MIRO, its asking to enter the GL account in line items. Everytime I am entering the GL account and pressing the enter key, it wipes off the GL account clean and gives the same error 'Enter GL account'.
    It seems like this error is happening at the very first line item of the invoice. System is able to accept the GL account in 2,3,4th lines. If I delete the first line item, whatever is the first line item in that screen adapts the issue.
    Any help would be great as I have no clue what to do.
    Thanks

    Hello Priyadarshini,
    could you inform the error message number and it complete long text?
    Regards,
    Mateus Grings

  • F-53, Simulate time getting message "Correct the marked line items"

    Hi All,
    While posting the outgoing payment (F-53),  at time of simulate I'm getting the message " correct the marked line items" & missing the vendor side line item but showing for enter amont( bank acccount line items) on screen.
    when I trying to do the second time, I observed that, process open item screen, amount entered & Assiged amount both showing minus(-)sign
    I guess the message getting because of the same sing(-) of vendor item & bank account,
    Can some one help me out to understanding the why it showing same sign and reslove the issue
    Thanks
    Ramakanth

    Hi Ravi,
    Yes, I have posted FB60 and in FBL1N showing credit balance of vendor but when clearing F-53 suprisingly showing wrong side amount I mean assigned amount( open item).
    Is there any configuration missing or any thing i missing is system.
    Thank you
    Ramakanth

  • Can change the price in the PO line item

    Hello experts,
    I have this Purchase order document where I can change the price in the PO line item(ME22N) where as in the other PO that I have created, changing the price in ME22N is not possible(shaded). They are all the same document type and plant combination. For the PB00 condition type configuration, It is set to D- not possible to process manually.
    Please help.

    Thanks for your answer. Yes i am aware of that, basically the settings is what the price indicated in the info record and as long it is included in the validty periiod then when you create the PO, that price will be detected by the system. i am clear for that, my issue is why there are some materials that i can change the price in the PO directly while the others are the pricing tab is disabled(cannot change the price)
    Settings in the SPRO-MM - PURHASING- CONDITIONS-DEFINE PRICE DETERMINATION PROCESS- DEFINE CONDITION TYPES PB00 is D(NOT POSSIBLE TO PROCESS MANUALLY) but stilll the system is showing some PO's that can be changed the price

  • Possibility of reversing Goods issue and delivery of one line item

    Hi experts,
    Is there a possibility of reversing Goods issue for only one line item and also the delviery for that line item so that i can make changes in the sales order for that line item only.
    Appreciate your response.
    Regards,
    krishna

    Hi Laxmipathi & Rithvika,
    Basically the issue is in the sales order there are around 90 line items out of which most of them has been processed the delivery and GI and even invoices has been made for some.
    While doing so, there are about 5-6 delivery docs has been created for the 90 line items.
    Now, we need to change some data for few line items , for this we dont want to do reversal for all the line items and again do a delivery and PGI as these line items are in various delivery docs.
    Let me know , if there is anyother way of doing it or we should follow the normal process of doing it all again.
    Regards,
    krishna

  • Issue in creation of new line item in repair order-Reg

    Hi all,
    I have a query in Service Management Module of SAP while working in standard IDES System.
    I followed the procedure given in the IDES material.
    As per the standard system the fourth line item in the repair order should be automatically created, once the service order is technically confirmed and completed. In my case iam able to get the first three (Item Categories - IRRS,IRRE,IRRP) line items but even after completing the service order technically iam not gettin the fourth line item (IRAL). Only based on the Fourth line item we can create the Outbound delivery for the repaired item. After that the billing process need to be processed. My query is how to get the fourth line item automatically in the repair order after i technically complete the Service Order. 
    To brief you on the entire process that i have followed:
    1. The QM Check need to be activated for the material.
    2. Creating the Service Notification and the repair request.
    3. Posting the GR of a piece of equipment to be repaired.
    4. Processing the technical check.
    5. Displaying the repair request and the service order.
    6. Editing the Service Order.
    7. Processing and Confirming the Service Order.
    8. Technically Completing the Service Order.
    9. Delivering the Repaired Piece of Equipment.
    Then Comes the BILLING.....
    In the above, after the eighth Step the Fourth Line item will be created automatically created but it DOESNT....
    regards
    Venu

    Hi ,
    Review your repair procedure and copy controls defined for this stage...mya be some thing is missing over there causing this behaviour.
    As you told completion of Service order will determine the last item and enable us to delivery the item to customer...
    Thanks,
    sudhi

  • Defaulting profit center from sales order while doing delive COGS line item

    HI All
    In my company COGS account is a cost element.when PGI(post goods issue) was posted, sap will automatically create an accounting dcument
    CR:stock account ( profit center from material master data or from sales order)
    DT:Cost of goods sold ( profit center from cost center master data)Can we default profit center from material master data(or from sales order) in the COGS line item
    Thanks in advance

    What is your current Version? Is it ECC6 and New GL implemented? Document split configuration will help you.
    If you are not using ECC6 and New GL, then try T.Code 3KEH and determine profit center based on Valuation area.    OR
    You may look into GL Line item level, Write a Validation Rule to select profit center.
    Hope this will help you.
    Thanks
    VR

  • Issue in Printing of FBL1N ( Line Item Display)

    Hi,
    I have an issue with the printing of the report FBL1N...
    When I execute the report with the Standard Layout "1SAP". The dispaly on the screen is correct. But when I tried print the output the display on the print out, excludes the Last Line item of the report & the Total's coloumn.
    But when I try to Print the Formats Created by User's the Output is coming accurately
    Can any one please inform me, what could be the issue, I tried printing of differnent printers, but the output is the same, also i tried adjusting the Rows & columns in Print Settings
    Regards
    Ash K

    Hi,
    When you print the report, try printing with some other printing layout like X_65_255.
    I hope this will help you.
    Regards,
    Niraj

  • Strike Through in ADOBE appears in the subsequent line items

    Hello ADOBE Forms creators;
    I am using the functionality of Strike through(line through) in my PO line items if the line item is deleted. However, in the following line item which is not marked as deleted if some of the fields have the same value as the deleted item, for example: if the quantity in the previous line(the deleted line item) is 5 and in the current line is also 5, this quantity in the current line item which is not marked as deleted gets the strikethrough as well. But if the value is not the same it will not get the strike through.
    Can anyone put some light into this issue. The points will awarded to the correct answer(s).
    Thanks,
    Cyrus

    What you are seeing is exactly as you described....ie. when the fields match in value, it applies to all. This has do to how you are navigating your DOM there in your Javascript. You are not making use of any indexing....just simply saying "any of my field values for quantity, apply this style". You are "referencing by name" to your fields.
    You have:
    this.parent.items.QUANTITY.blah.blah
    when it should look something like (forgive me but off top of my head....look/search for correct syntax)....
    this.parent.list.items[index].QUANTITY.blah.blah
    basically you need to find the index of your "QUANTITY" children (and other like named fields). They are all "named" the same, so they will have some kind of index to resolved them correctly. It might be an index after "QUANTITY". I am guessing you will look at the index for IND_TXT and then find all other fields with that same index (ie. same row?).
    Hope this helps.

  • I want to capture data through I/O while posting to Customer Line items

    Hi Experts
    Can you please suggest me that while posting to Customer line items i would require to capture data through Internal Order, is this possible if yes please explain
    Regards
    Sreenivasulu

    Hi
    Internal Order details can be updated to the P&L line item ie revenue line item in your case. From ECC 6.0 it will be available in the General Ledger view of the document.
    Regards,
    Lakshmanan Krishnan

  • Unable to update profit center or plant code in the customer line item

    Hi,
    We require the profit center and plant code and division in FI
    documents (Posted through billing document or through direct FI entry)
    We are unable to input plant or profit center in the customer line item
    while using F-21 or any other FI transaction
    The plant and profit center is not appearing even in customer line item
    in RV document (From SD billing)
    We have made the Field status group as optional for the reconcilation
    accounts.
    Regards
    Sembian

    Hi
    Profit center / cost center are generally entered in revenue & expense line items (P&L items). Customer / vendor master and line items are balance sheet items which will not show profit / cost centers.
    Regards
    Neeraj

  • Retail Tab in the PO line item..

    Hello all!
    I need this help - Now, I have this "Retail tab" showing up at the PO line item level. It is happening to every PO doc type and Pur org combination. It does not show in Sand box...
    There is no retail activated at all in the 4.7 version.
    Appreciate any help... on this. to remove the "Retail tab" at the PO line item .
    Thanks
    Best Regards

    Hello Swati,
    It does not show up now.
    I put back everything as it was.
    Right now the settings are as follows in defining screen layout for ME21N - Administrative data, item
    Except "No chect all" rest have been ticked "Optional entry"
    Points
    Promotion                   (No check at all)
    Deletion indicator
    Rounding profile
    Info update
    Indicator: estimated price
    Prior vendor                (No check at all)
    Season                       ( No check at all)
    Control key QM
    Reason for ordering    (No check at all)
    Revision level
    Except "Indicator: requisition closed " which has no checks at all - rest are all optional.
    IDeadline monitoring
    Delivery date
    Statistics-relev. deliv. date
    Order acknowledgment reqt.
    Schedule line time spot
    Order acknowledgment
    Reminder control
    Shipping dates/supplying plant
    Route schedule
    Goods receipt processing time
    Confirmation control key
    Indicator: requisition closed          (No check at all)
    I created a couple of PO's and Retail tab does not show up .
    IThanks again!!
    If I have an issues I will open this up..
    Best Regards

  • Issue While executing the Query for Pagination using ROWNUM with like

    Issue While executing the Query for Pagination using ROWNUM with like.
    Database is Oracle11G.
    Oracle Database Table contains 8-9 lakh records
    1) SQL equal (=)
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE A.REFERENCE = 'KMF22600920'
    Execution Time:- 0.00869245 seconds
    Returns 2 resultsets
    2) SQL like (one %)
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE A.REFERENCE = 'KMF22600920%'
    Execution Time:- 0.01094301 seconds
    Returns 2 resultsets
    3) SQL like (two%)
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE A.REFERENCE like '%KMF22600920%'
    Execution Time:- 6.43989658 seconds
    Returns 2 resultsets
    In Pagination, we are using Modified version of SQL Query 3) with ROWNUM as mentioned below :-
    4) SELECT * FROM (
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) WHERE RNUM > 0
    Execution Time:- Infinite
    ResultSets:- No as execution time is infinite
    a) Instead of like if we use = in the above query it is returning the 2 resultsets (execution time 0.02699282 seconds)
    b) Instead of two % in the above query, if use one example REFERENCE like 'KMF22600920%' it is returning the 2 resultsets (execution time 0.03313019 seconds)
    Issue:- When using two % in like in the above query i.e. REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) , it is going to infinite.
    Could you please let us know what is the issue with two % used in like and rownum
    5) Modified version of Option1 query (move out the RNUM condition AND RNUM <= 20)
    SELECT * FROM (
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE REFERENCE like '%KMF22600920%' ) WHERE RNUM > 0 AND RNUM <= 20
    Execution Time:- 7.41368914 seconds
    Returns 2 resultsets
    Is the above query is best optimized query which should be used for the Pagination or still can improve on this ?

    This would be easier to diagnose if there was an explain plan posted for the 'good' and 'bad' queries. Generally speaking using '%' on both sides precludes the use of any indexes.

Maybe you are looking for