Issue with a work order

Hi Team,
I am having an issue with the work order having multiple line items for the same component. Out of all line items it is showing error for two line items mentioning,
No status object available for CMP 81411471 0160 0110
Double clicked on it msg no displayed BS.001
Please help on this issue, Thanks in advance.
Regards
Nivas

Are you using Work Clearance Management?? Please provide the detailed error message, if any.
67826 - Restoring the status for orders RIORDST1
http://scn.sap.com/thread/3209398
Check the above details.

Similar Messages

  • Issues with printing purchase order

    Dear friends,
    I'm having some issues with printing purchase orders.
    Normally when I create a purchase order via ME21N and then when I save the purchase order it then gets automatically printed.
    Suddenly it is not anymore working. I have created a purchase order this morning and it did not get printed. I get the message "frontend is not available"when i check the spool in SP01
    The funny think is if i call up the spool nr via SP01and then do a reprint then i'm able to reprint.
    What can be possibly the issue that I can't print the purchase order when I create the purchase order via ME21 when I save the purchase order? Can you help me with any guide on where I need to check why the PO is not printing immediatelly when i create the PO via ME21N?
    kind regards,
    Camilla

    hello all,
    thanks so far for your reply.
    i have checked today my user settings and that shows that my prints should go to LOCL (local default printer)
    The output conditions fpr purchase order have also LOCL (local printer)
    The weird thing is that I can print other reports to the default printer without any issues. The issue arise when I create a purchase order via ME21N. Normally when I save the PO it automatically prints. So no manual print instructions are required from my side. Because if I give manual instructions then I'm able to print the purchase order.
    Is it possible that the automatic printing is switched off and that it only prints when I hit manually the print button?
    Is the automatic printing something that is maintained in SPAD?
    kind regards and thanks for your help sofar

  • Issue with printing production order after changes through CO02

    Hi,
    Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
    Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
    Regards,
    Shiva

    Hi Shiva,
    Refer SAP note 28887.
    Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
    Please search /google before posting queries.
    Regards,
    SuryaD.

  • Restricted issue material in "work order"

    Hi All
    How to restrict the material at the time of the process of issue material in work order?
    we need to restrictive to Not to be wasteful.
    any can help my problem?
    thankyu..
    The pooh

    Hi PS
    Sorry if my question make you confused. but actually im need to have a system that we can restricted issue material.
    In our company have the rule that we can only take some part consumable.
    for example :
    in one month, we can only take the part just 100 pc. we not allowed to take the part more than 100 pc.
    so we must restrict that.
    Best Regards,
    the pooh

  • Goods issue wrf to work order (ESM)

    Dear All,
    External Service Management.
    my client had new scenerio.
    if a work order is issued for Rs.10,000/-  conditon that consumables / any spares required to complete the job should born by contractor.
    means : during the work if contractor need "gloves"  he should bring the gloves at his cost.
    but, the scenerio is
    my client is issuing those items with reference to that work order and at the time of billing he is deducting those cost and settling the bill.
    kindly advise how to map this please.
    Regards,
    Adi

    Dear Arul,
    Kindly be clear, and advise how to mark the issue while migo with reference to Work order please.
    regards
    Adi

  • Approval for material return issued against the Work Order

    Hello,
    We are using PM module and issuing materials against the work order.  Many times users are returning the un-used material back to stores.  This un-used material may come back <b>with or without</b> work order reference.  i.e. Sometimes they just return bunch of material but don't know the work order # against it was issued initially.
    We need to control this flow of un-used return material through proper system approval.
    How can do this.
    Thanks,

    Hi,
    In standard SAP There is no approval process to return the material.
    I have one work around , you can create one PM order to return the material & instruct your store people to receive the material only with reference to PM order.
    With out releasing a PM order, system will not allow to post the goods return.
    I hope it may help you.
    Regards,
    Manish

  • ISSUE WITH SERVICE PURCHASE ORDER STATUS

    Hi
    There is an issue with a Service PO.When I created a service p.o the
    p.o value was 1,543,695.60 USD . I created service entry sheet and GR
    for 1,029,130.40 USD.
    The still to be delivered amount should be 1,543,695.60-1,029,130.40 =514565.20 USD
    But the Amount Still to be delivered in p.o STATUS HEADER DATA screen shows 191,761.60 USD.
    Actually the system should show the delivered status as 514565.20 USD.
    What should be the cause for this???
    I checked the invoice also.Invoicing is done for 1,029,130.40 USD.
    Apperciate ur immediate feedback on this.

    Hi
    S012 is updated by the Purchase Order creation date, not the Goods Receipt date. e.g. a Purchase Order is created in January and good receipt is in February and March, S012 will shows the values in period January.
    try Transaction MC26
    Info structure S012  Update group (stats) SAP
    Double click on  Goods received qty
    In the section Date field for period determination
    check regarding date or change accordingly
    hope it helps.

  • Hi All, I have an Issue with iMessages working from iphone 4s but not from macbook air

    Hi everyone, I'm new to MAC's but have had an iphone for a while, so much so I had an iphone 4 but got an iphone 4s, I gave my 4 to my dad, and after recantly buying a MBA tried to imessage the old man but his name turns red and will not allow me to  send a message, I can however imessage him from my phone, I have the same issue with two other friends, but I know Imessage works on my MBA as I have two other people it works with (On the side the group Imessage is so cool) we did have an issue with facetime not recognising him untill he switched it off and on from system prefrance on his iphone, not sure if this is related or if this is a MBA issue or iphone issue, but could do with some help as I'm an Apple convert and I'm now hoping to convert the old man who loves microsoft, I told him how 'Apple just work' and at the moment have egg on my face
    Please help all surgestions greatlly reacived

    When sending a message from Mountain Lion's Message program, you should be careful about the recipient's address.  When you send a message to your dad, you should send it to his iPhone's phone number.
    Also, on your Mac's Messages > Preferences > Accounts, you should be logged in under your Apple ID (which is hopefully different from your dad's).
    Enjoy your Apple gear!  Indeed, it does "just work".

  • Issue with BAPI_PO_CHANGE: purchase order locked

    I'm experiencing problems with the following scenario:
    1. change purchase order with RFC BAPI_PO_CHANGE
    2. wait 30 seconds
    3. post goods issue using IDoc MBGMCR01
    When performing step 3, I get in 20% of the cases the error that the PO is still locked by the RFC user in the R/3 system (user PIREMOTE already processing purchase document 123456789). I have tried to extend the wait step to 10 minutes, but the same issues still remains.
    I've also tried executing BAPI_TRANSACTION_COMMIT (with and without wait) and BAPI_DOCUMENT_DEQUEUE between step 1 and 2. Neither worked.
    Debugging BAPI_PO_CHANGE using SE37 didn't give any results. I noticed that the PO was still locked even when the processing of BAPI_PO_CHANGE in SE37 had finished. Somehow R/3 is locking the purchase document for a very long time in 20% of the cases. During the execution of the module enough work processes are available and no jobs are running.
    Has anyone ever experienced something like this and has an idea where to look next?

    So that should be BAPI_TRANSACTION_ROLLBACK in my case, since I have to use remote enabled functions. What does this function do? It looks like it's rolling back the performed transaction, thus reversing the changes, and that's not my intention.
    Edited by: Iddo Rijsdijk on May 25, 2008 1:09 PM

  • Issues with new phone order

    Well my experience with BT has been through the floor so far. I ordered a new line on 31/07 and the order wne throough fine. I paid what I had to and activated what they wanted. I got an email to say an engineer would visit on 24/08. 3 1/2 weeks seemed like a long time to wait for a visit but I waited patiently for the day to come.
    My partner stayed in and waitied for the engineer but no one showed up and no one contacted us to say there was an issue or any kind of delay. I called BT and spoke to someone who said open reach were working on the lines and that we would have to wait until 30/08.
    As you can imagine I wasn't happy but I was willing to wait until the end of the month to see if we could get the line installed. I now receive an email saying that an engineer will visit on 01/10. I mean are they serious? Over 2 months after I place the order? This is ridiculous and I have obviously sent in a complaint to BT about this.
    I can't believe that BT didn't contact us to tell us the engineer wasn't going to come when it was obvious the agreed date wouldn't be honoured and then they give us a new date over a month later. How busy can they be installing lines in the summer when everyone is away?
    Oh and I work for BT.

    If you work for BT, then you will know that its Openreach who deal with the external network. They have a large backlog of work at the moment.
    BT Retail do not get any priority over other service providers.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Podcast sync issue with home & work Macs

    Since as long as i can remember, i have been able to sync my music & video files with my iPhone at home while separately syncing my Podcasts at work (as new ones became available during the day).
    I am having an issue now when i sync at home, (even though podcasts are set to NOT SYNC) where a sync of music and video will erase my podcasts that were put on at work.
    Is this a Feature/Bug of 1.1.4? Has anyone experienced this issue?

    Another strange issue i have just noticed... If is sync podcasts at home, and then i sync at work (with podcasts not selected to sync) the iTunes at work will leave them on the phone.
    So it seems to be an Itunes (home) issue. Anyone know what prefs or resets i can to to set the syncs straight on my itunes at home. Work seems to be syncing correctly.

  • Issue with Service Contracts Order Capture Integration (OKSOCINT) program

    Hi,
    Could anyone tell me how to turn off trace for Service Contracts Order Capture Integration (OKSOCINT) program? Trace is not enabled at conc. program level or user level, but the program still generates large trace files. It is scheduled to run every hour. I could not find anything on metalink regarding this. We're on 11.5.9 version of Apps. Any help is appreciated.
    TIA,
    Alka

    Sorry Nagamohan, I got sidetracked by other issues and could not reply. Here's the beginning part of the trace file that shows the concurrent program name (see the name in bold):
    Dump file /PRD1/code/oracle/11.5.9/prd1db/10.2.0/admin/PRD1_oprddb/udump/prd1_ora_29363.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /PRD1/code/oracle/11.5.9/prd1db/10.2.0
    System name: HP-UX
    Node name: oprddb1
    Release: B.11.11
    Version: U
    Machine: 9000/800
    Instance name: PRD1
    Redo thread mounted by this instance: 1
    Oracle process number: 120
    Unix process pid: 29363, image: oracle@oprddb1
    *** 2009-04-09 10:01:03.120
    *** ACTION NAME:(Concurrent Request) 2009-04-09 10:01:03.119
    *** MODULE NAME:(OKSOCINT) 2009-04-09 10:01:03.119
    *** SERVICE NAME:(PRD1) 2009-04-09 10:01:03.119
    *** SESSION ID:(1077.23949) 2009-04-09 10:01:03.119
    =====================
    Regards,
    Alka

  • Issue with setting work status

    Hi Gurus,
    I am using the standard work status (copied from Appset), in the applications work status setting I have set entity as owner and time and category as yes for work status. In the entity dimension under owner and reviewer property I have keyed in the correct user ids. I am using one of the owner user id to perform the activity mentioned below
    The issue I am facing is when I select modify work status from Esubmit menu it takes me to the web interface for setting the Work status after selecting the value for the 3 dimensions mentioned above when I click on OK it pops up a message that you are not authorized to change the work status setting please contact system administrator. The owners have admin profiles for auth so they should be able to do pretty much everything.
    would appreciate help on this
    BPC 5.1 Support Pack 2
    Thanks

    Make sure all the members within the parent hierarchy you are using have owners assigned.
    In BPC terms; Managers are the owners of parents, owners are the owners of members.
    For example the owner might be a clerk entering forecast data for a single/set of entities, (base level members). The manager owns the parent.
    Also, when testing, make sure you login to the system/server/domain/network, (whatever) with the userid you will be testing with and then login to BPC. (Just to be sure.)
    This should do it if you have everything else laid out!
    Good Luck!

  • Issue with setting Tab Order

    In designer i create a form and set the tab order, when i preview the PDF the tab order works fine. But when i do a save as and save the form as a pdf document the tab order changes automatically. I even set the hirerarchy of the fields. Can some one suggest me a solution?

    Can you post your form so I can have a look at it..
    Steps to upload the document
    1) goto acrobat.com website
    2) login with your Adobe login/password.
    3) In Actions you will find Upload. Select your form and upload.
    4) After uploading, select form name in All Files section and right click and select share.
    5) Check the checkbox "Allow anyone with a link to view this document".
    6) Copy the URL link and post it in the forum.
    Thanks
    Srini

  • Issues with gaming pre-order shipping - improvements needs to be made

    Titanfall comes out today. I pre-ordered this game a few weeks ago on BestBuy.com because the 20% off and the $10 certificate were too hard to pass up. I placed my order, put expedited shipment since I knew I couldn't make it to Best Buy after work on Tuesday (I carpool right now) and called it a day.
    Except here's the thing. Not only did the game not ship in time to arrive by today, it shipped UPS Standard instead of expedited. Talking to some others this seems to be a trend. 
    Certificates, 20% off, these are all great incentives to pre-order my games at Best Buy, but not being able to meet release day shipping even for Elite Plus members who get free expedited shipping?  That isn't even counting the fact that Best Buy didn't ship expedited like they were supposed to. Now I won't get the biggest release of 2014 so far until tomorrow. A day later than I would from most other retailers. These issues really need to be improved and it is largely an operational thing; the games have been sitting in your warehouse for at least a week, why my game didn't ship until 3pm Central time on Monday is beyond me. 

    Hello tmrendo -
    Whenever a pre-order is placed on BestBuy.com for software or a video game title, we ship that item as soon as it's available for release. If expedited shipping is selected at the time of checkout, this means you can typically expect to receive your copy within 2-3 business days of its release. For faster delivery, customers are encouraged to choose express shipping or store pickup at the time of checkout.
    BestBuy.com > Help Center > Pre-Orders
    BestBuy.com > Help Center > Shipping Costs & Timing
    That being said, thank you for your feedback! We rely on customer input -- both positive and negative -- to improve our service offerings, so your thoughts are appreciated.
    cleavelandmvp & caliwolv -
    I've had the chance to review both of your accounts and can confirm that your orders were, indeed, shipped via expedited shipping. Depending on on your proximity to the fulfillment center that processed your order, UPS Ground may be listed as the shipping method rather than UPS Second Day on UPS' tracking site. Rest assured though that your copies of Titanfall are all expected to arrive within the 2-3 day window provided when you placed your orders.
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

Maybe you are looking for