Issue with ACPI themal_zones

So today I set up lm_sensors on my AMD Phenom II. Unfortunately, this proc does not support coretemp, but it did seem to detect both my CPU and motherboard thermal sensors. The output for sensors is: http://pastebin.com/J4k4DCtn. However /proc/acpi/thermal_zones is empty. I was wondering if this is normal or an issue with ACPI et cetera. I would like to use /proc/acpi/thermal_zones for xmobars Thermal plugin... Thanks!

Cool, I found it... unfortunately this means I can't use the Thermal function xmobar, but I can now easily write my own function!

Similar Messages

  • Issue with MacBook Air and nouveau

    Hi.
    I've installed Arch Linux on MacBook Air with Nvidia 320M videocard. Proprietary nvidia driver does not work at all and nouveau has video artefacts (photo attached because screenshot pictures haven't any problems): horizontal noisy black lines and wrong colors on the left two thirds of screen.
    /var/log/Xorg.0.log
    [ 4.374]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 4.374]
    X.Org X Server 1.11.99.903 (1.12.0 RC 3)
    Release Date: 2012-02-11
    [ 4.374] X Protocol Version 11, Revision 0
    [ 4.374] Build Operating System: Linux 3.2.6-2-ARCH x86_64
    [ 4.374] Current Operating System: Linux nikimac 3.2.6-2-ARCH #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012 x86_64
    [ 4.374] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/disk/by-uuid/639277e8-a2f3-4313-b3e6-81eeb1453e85 ro init=/bin/systemd quiet
    [ 4.374] Build Date: 18 February 2012 05:06:59PM
    [ 4.374]
    [ 4.374] Current version of pixman: 0.24.4
    [ 4.374] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4.374] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4.374] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 21 16:55:39 2012
    [ 4.380] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4.382] (==) No Layout section. Using the first Screen section.
    [ 4.382] (==) No screen section available. Using defaults.
    [ 4.382] (**) |-->Screen "Default Screen Section" (0)
    [ 4.382] (**) | |-->Monitor "<default monitor>"
    [ 4.382] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 4.382] (==) Automatically adding devices
    [ 4.382] (==) Automatically enabling devices
    [ 4.392] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 4.393] Entry deleted from font path.
    [ 4.402] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 4.402] Entry deleted from font path.
    [ 4.402] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 4.402] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 4.402] Entry deleted from font path.
    [ 4.402] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 4.402] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 4.402] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4.402] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4.402] (II) Loader magic: 0x7cf1e0
    [ 4.402] (II) Module ABI versions:
    [ 4.402] X.Org ANSI C Emulation: 0.4
    [ 4.402] X.Org Video Driver: 12.0
    [ 4.402] X.Org XInput driver : 16.0
    [ 4.402] X.Org Server Extension : 6.0
    [ 4.404] (--) PCI:*(0:2:0:0) 10de:08a3:106b:00d3 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
    [ 4.404] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4.404] (II) LoadModule: "extmod"
    [ 4.414] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 4.415] (II) Module extmod: vendor="X.Org Foundation"
    [ 4.415] compiled for 1.11.99.903, module version = 1.0.0
    [ 4.415] Module class: X.Org Server Extension
    [ 4.415] ABI class: X.Org Server Extension, version 6.0
    [ 4.415] (II) Loading extension MIT-SCREEN-SAVER
    [ 4.415] (II) Loading extension XFree86-VidModeExtension
    [ 4.415] (II) Loading extension XFree86-DGA
    [ 4.415] (II) Loading extension DPMS
    [ 4.415] (II) Loading extension XVideo
    [ 4.415] (II) Loading extension XVideo-MotionCompensation
    [ 4.415] (II) Loading extension X-Resource
    [ 4.415] (II) LoadModule: "dbe"
    [ 4.415] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 4.416] (II) Module dbe: vendor="X.Org Foundation"
    [ 4.416] compiled for 1.11.99.903, module version = 1.0.0
    [ 4.416] Module class: X.Org Server Extension
    [ 4.416] ABI class: X.Org Server Extension, version 6.0
    [ 4.416] (II) Loading extension DOUBLE-BUFFER
    [ 4.416] (II) LoadModule: "glx"
    [ 4.416] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4.419] (II) Module glx: vendor="X.Org Foundation"
    [ 4.419] compiled for 1.11.99.903, module version = 1.0.0
    [ 4.419] ABI class: X.Org Server Extension, version 6.0
    [ 4.419] (==) AIGLX enabled
    [ 4.419] (II) Loading extension GLX
    [ 4.420] (II) LoadModule: "record"
    [ 4.420] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 4.420] (II) Module record: vendor="X.Org Foundation"
    [ 4.420] compiled for 1.11.99.903, module version = 1.13.0
    [ 4.420] Module class: X.Org Server Extension
    [ 4.420] ABI class: X.Org Server Extension, version 6.0
    [ 4.420] (II) Loading extension RECORD
    [ 4.420] (II) LoadModule: "dri"
    [ 4.421] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 4.422] (II) Module dri: vendor="X.Org Foundation"
    [ 4.422] compiled for 1.11.99.903, module version = 1.0.0
    [ 4.422] ABI class: X.Org Server Extension, version 6.0
    [ 4.422] (II) Loading extension XFree86-DRI
    [ 4.422] (II) LoadModule: "dri2"
    [ 4.423] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 4.425] (II) Module dri2: vendor="X.Org Foundation"
    [ 4.425] compiled for 1.11.99.903, module version = 1.2.0
    [ 4.425] ABI class: X.Org Server Extension, version 6.0
    [ 4.425] (II) Loading extension DRI2
    [ 4.425] (==) Matched nouveau as autoconfigured driver 0
    [ 4.425] (==) Matched nvidia as autoconfigured driver 1
    [ 4.425] (==) Matched nv as autoconfigured driver 2
    [ 4.425] (==) Matched vesa as autoconfigured driver 3
    [ 4.425] (==) Matched fbdev as autoconfigured driver 4
    [ 4.425] (==) Assigned the driver to the xf86ConfigLayout
    [ 4.425] (II) LoadModule: "nouveau"
    [ 4.425] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 4.429] (II) Module nouveau: vendor="X.Org Foundation"
    [ 4.429] compiled for 1.11.99.902, module version = 0.0.16
    [ 4.429] Module class: X.Org Video Driver
    [ 4.429] ABI class: X.Org Video Driver, version 12.0
    [ 4.429] (II) LoadModule: "nvidia"
    [ 4.429] (WW) Warning, couldn't open module nvidia
    [ 4.429] (II) UnloadModule: "nvidia"
    [ 4.429] (II) Unloading nvidia
    [ 4.429] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 4.429] (II) LoadModule: "nv"
    [ 4.429] (WW) Warning, couldn't open module nv
    [ 4.429] (II) UnloadModule: "nv"
    [ 4.429] (II) Unloading nv
    [ 4.429] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 4.429] (II) LoadModule: "vesa"
    [ 4.429] (WW) Warning, couldn't open module vesa
    [ 4.429] (II) UnloadModule: "vesa"
    [ 4.429] (II) Unloading vesa
    [ 4.429] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 4.430] (II) LoadModule: "fbdev"
    [ 4.430] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 4.431] (II) Module fbdev: vendor="X.Org Foundation"
    [ 4.431] compiled for 1.11.99.903, module version = 0.4.2
    [ 4.431] ABI class: X.Org Video Driver, version 12.0
    [ 4.431] (II) NOUVEAU driver
    [ 4.431] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 4.431] RIVA TNT (NV04)
    [ 4.431] RIVA TNT2 (NV05)
    [ 4.431] GeForce 256 (NV10)
    [ 4.431] GeForce 2 (NV11, NV15)
    [ 4.431] GeForce 4MX (NV17, NV18)
    [ 4.431] GeForce 3 (NV20)
    [ 4.431] GeForce 4Ti (NV25, NV28)
    [ 4.431] GeForce FX (NV3x)
    [ 4.431] GeForce 6 (NV4x)
    [ 4.432] GeForce 7 (G7x)
    [ 4.432] GeForce 8 (G8x)
    [ 4.432] GeForce GTX 200 (NVA0)
    [ 4.432] GeForce GTX 400 (NVC0)
    [ 4.432] (II) FBDEV: driver for framebuffer: fbdev
    [ 4.432] (++) using VT number 7
    [ 4.437] drmOpenDevice: node name is /dev/dri/card0
    [ 5.343] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
    [ 5.343] drmOpenDevice: node name is /dev/dri/card0
    [ 5.343] drmOpenDevice: open result is 7, (OK)
    [ 5.343] drmOpenByBusid: drmOpenMinor returns 7
    [ 5.343] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
    [ 5.343] (II) [drm] nouveau interface version: 0.0.16
    [ 5.343] (WW) Falling back to old probe method for fbdev
    [ 5.343] (II) Loading sub module "fbdevhw"
    [ 5.343] (II) LoadModule: "fbdevhw"
    [ 5.343] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 5.344] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 5.344] compiled for 1.11.99.903, module version = 0.0.2
    [ 5.344] ABI class: X.Org Video Driver, version 12.0
    [ 5.344] (II) Loading sub module "dri"
    [ 5.344] (II) LoadModule: "dri"
    [ 5.344] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 5.344] (II) Module dri: vendor="X.Org Foundation"
    [ 5.344] compiled for 1.11.99.903, module version = 1.0.0
    [ 5.344] ABI class: X.Org Server Extension, version 6.0
    [ 5.344] (II) NOUVEAU(0): Loaded DRI module
    [ 5.344] drmOpenDevice: node name is /dev/dri/card0
    [ 5.344] drmOpenDevice: open result is 8, (OK)
    [ 5.344] drmOpenDevice: node name is /dev/dri/card0
    [ 5.344] drmOpenDevice: open result is 8, (OK)
    [ 5.344] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
    [ 5.344] drmOpenDevice: node name is /dev/dri/card0
    [ 5.344] drmOpenDevice: open result is 8, (OK)
    [ 5.344] drmOpenByBusid: drmOpenMinor returns 8
    [ 5.344] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
    [ 5.344] (II) [drm] DRM interface version 1.4
    [ 5.344] (II) [drm] DRM open master succeeded.
    [ 5.344] (--) NOUVEAU(0): Chipset: "NVIDIA NVaf"
    [ 5.344] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 5.344] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 5.344] (==) NOUVEAU(0): RGB weight 888
    [ 5.344] (==) NOUVEAU(0): Default visual is TrueColor
    [ 5.344] (==) NOUVEAU(0): Using HW cursor
    [ 5.344] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 5.345] (==) NOUVEAU(0): Page flipping enabled
    [ 5.379] (II) NOUVEAU(0): Output eDP-1 has no monitor section
    [ 5.540] (II) NOUVEAU(0): Output DP-1 has no monitor section
    [ 5.559] (II) NOUVEAU(0): EDID for output eDP-1
    [ 5.559] (II) NOUVEAU(0): Manufacturer: APP Model: 9cdf Serial#: 0
    [ 5.559] (II) NOUVEAU(0): Year: 2010 Week: 35
    [ 5.559] (II) NOUVEAU(0): EDID Version: 1.3
    [ 5.559] (II) NOUVEAU(0): Digital Display Input
    [ 5.559] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 29 vert.: 18
    [ 5.559] (II) NOUVEAU(0): Gamma: 2.20
    [ 5.559] (II) NOUVEAU(0): No DPMS capabilities specified
    [ 5.559] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 5.559] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 5.559] (II) NOUVEAU(0): redX: 0.593 redY: 0.342 greenX: 0.331 greenY: 0.573
    [ 5.559] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
    [ 5.559] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 5.559] (II) NOUVEAU(0): Supported detailed timing:
    [ 5.559] (II) NOUVEAU(0): clock: 91.5 MHz Image Size: 286 x 179 mm
    [ 5.559] (II) NOUVEAU(0): h_active: 1440 h_sync: 1504 h_sync_end 1546 h_blank_end 1652 h_border: 0
    [ 5.559] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
    [ 5.559] (II) NOUVEAU(0): Unknown vendor-specific block 1
    [ 5.559] (II) NOUVEAU(0): LP133WP1-TPA1
    [ 5.559] (II) NOUVEAU(0): Monitor name: Color LCD
    [ 5.559] (II) NOUVEAU(0): EDID (in hex):
    [ 5.559] (II) NOUVEAU(0): 00ffffffffffff000610df9c00000000
    [ 5.559] (II) NOUVEAU(0): 23140103801d12780aef059757549227
    [ 5.559] (II) NOUVEAU(0): 22505400000001010101010101010101
    [ 5.559] (II) NOUVEAU(0): 010101010101c223a0d450841a30402a
    [ 5.559] (II) NOUVEAU(0): 36001eb3100000180000000100061030
    [ 5.559] (II) NOUVEAU(0): 00000000000000000a20000000fe004c
    [ 5.559] (II) NOUVEAU(0): 503133335750312d54504131000000fc
    [ 5.559] (II) NOUVEAU(0): 00436f6c6f72204c43440a202020001f
    [ 5.559] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 5.559] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 5.559] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 5.559] (II) NOUVEAU(0): Printing probed modes for output eDP-1
    [ 5.559] (II) NOUVEAU(0): Modeline "1440x900"x59.8 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 5.559] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
    [ 5.559] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
    [ 5.559] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
    [ 5.560] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
    [ 5.560] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
    [ 5.560] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
    [ 5.560] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
    [ 5.720] (II) NOUVEAU(0): EDID for output DP-1
    [ 5.720] (II) NOUVEAU(0): Output eDP-1 connected
    [ 5.720] (II) NOUVEAU(0): Output DP-1 disconnected
    [ 5.720] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 5.720] (II) NOUVEAU(0): Output eDP-1 using initial mode 1440x900
    [ 5.720] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 5.720] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
    [ 5.720] (**) NOUVEAU(0): Driver mode "1440x900": 91.5 MHz (scaled from 0.0 MHz), 55.4 kHz, 59.8 Hz
    [ 5.720] (II) NOUVEAU(0): Modeline "1440x900"x59.8 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 5.720] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
    [ 5.720] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
    [ 5.720] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
    [ 5.720] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
    [ 5.720] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
    [ 5.720] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
    [ 5.720] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
    [ 5.720] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
    [ 5.720] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
    [ 5.720] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
    [ 5.720] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
    [ 5.720] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
    [ 5.720] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
    [ 5.720] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
    [ 5.720] (**) NOUVEAU(0): Display dimensions: (290, 180) mm
    [ 5.720] (**) NOUVEAU(0): DPI set to (126, 127)
    [ 5.720] (II) Loading sub module "fb"
    [ 5.720] (II) LoadModule: "fb"
    [ 5.720] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 5.721] (II) Module fb: vendor="X.Org Foundation"
    [ 5.721] compiled for 1.11.99.903, module version = 1.0.0
    [ 5.721] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.721] (II) Loading sub module "exa"
    [ 5.721] (II) LoadModule: "exa"
    [ 5.722] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 5.722] (II) Module exa: vendor="X.Org Foundation"
    [ 5.722] compiled for 1.11.99.903, module version = 2.5.0
    [ 5.722] ABI class: X.Org Video Driver, version 12.0
    [ 5.722] (II) Loading sub module "shadowfb"
    [ 5.722] (II) LoadModule: "shadowfb"
    [ 5.722] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 5.723] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 5.723] compiled for 1.11.99.903, module version = 1.0.0
    [ 5.723] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.723] (II) UnloadModule: "fbdev"
    [ 5.723] (II) Unloading fbdev
    [ 5.723] (II) UnloadSubModule: "fbdevhw"
    [ 5.723] (II) Unloading fbdevhw
    [ 5.723] (--) Depth 24 pixmap format is 32 bpp
    [ 5.728] (II) NOUVEAU(0): Opened GPU channel 2
    [ 5.728] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 5.728] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 5.728] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 5.729] (II) NOUVEAU(0): GART: 64MiB available
    [ 5.736] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
    [ 5.738] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 5.738] (II) EXA(0): Driver registered support for the following operations:
    [ 5.738] (II) Solid
    [ 5.738] (II) Copy
    [ 5.738] (II) Composite (RENDER acceleration)
    [ 5.738] (II) UploadToScreen
    [ 5.738] (II) DownloadFromScreen
    [ 5.738] (==) NOUVEAU(0): Backing store disabled
    [ 5.738] (==) NOUVEAU(0): Silken mouse enabled
    [ 5.738] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 5.738] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 5.738] (==) NOUVEAU(0): DPMS enabled
    [ 5.738] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 5.738] (--) RandR disabled
    [ 5.738] (II) Initializing built-in extension Generic Event Extension
    [ 5.738] (II) Initializing built-in extension SHAPE
    [ 5.738] (II) Initializing built-in extension MIT-SHM
    [ 5.738] (II) Initializing built-in extension XInputExtension
    [ 5.738] (II) Initializing built-in extension XTEST
    [ 5.738] (II) Initializing built-in extension BIG-REQUESTS
    [ 5.738] (II) Initializing built-in extension SYNC
    [ 5.738] (II) Initializing built-in extension XKEYBOARD
    [ 5.738] (II) Initializing built-in extension XC-MISC
    [ 5.738] (II) Initializing built-in extension SECURITY
    [ 5.738] (II) Initializing built-in extension XINERAMA
    [ 5.738] (II) Initializing built-in extension XFIXES
    [ 5.738] (II) Initializing built-in extension RENDER
    [ 5.738] (II) Initializing built-in extension RANDR
    [ 5.738] (II) Initializing built-in extension COMPOSITE
    [ 5.738] (II) Initializing built-in extension DAMAGE
    [ 5.799] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 5.799] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 5.799] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 5.799] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 5.800] (II) AIGLX: Loaded and initialized nouveau
    [ 5.800] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 5.805] (II) NOUVEAU(0): NVEnterVT is called.
    [ 6.217] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
    [ 6.217] resize called 1440 900
    [ 6.272] (II) XKB: Reusing cached keymap
    [ 6.274] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 6.274] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.274] (II) LoadModule: "evdev"
    [ 6.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.275] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.275] compiled for 1.11.99.902, module version = 2.6.99
    [ 6.275] Module class: X.Org XInput Driver
    [ 6.275] ABI class: X.Org XInput driver, version 16.0
    [ 6.275] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.275] Option "XkbRules" "evdev"
    [ 6.275] Option "XkbModel" "evdev"
    [ 6.275] Option "XkbLayout" "us"
    [ 6.275] Option "_source" "server/udev"
    [ 6.275] Option "name" "Power Button"
    [ 6.275] Option "path" "/dev/input/event3"
    [ 6.275] Option "device" "/dev/input/event3"
    [ 6.275] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 6.275] Option "driver" "evdev"
    [ 6.275] (**) Power Button: always reports core events
    [ 6.275] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 6.275] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.275] (--) evdev: Power Button: Found keys
    [ 6.275] (II) evdev: Power Button: Configuring as keyboard
    [ 6.275] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 6.275] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 6.275] (**) Option "xkb_rules" "evdev"
    [ 6.275] (**) Option "xkb_model" "evdev"
    [ 6.275] (**) Option "xkb_layout" "us"
    [ 6.301] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 6.301] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 6.301] (II) Using input driver 'evdev' for 'Video Bus'
    [ 6.301] Option "XkbRules" "evdev"
    [ 6.301] Option "XkbModel" "evdev"
    [ 6.301] Option "XkbLayout" "us"
    [ 6.301] Option "_source" "server/udev"
    [ 6.301] Option "name" "Video Bus"
    [ 6.301] Option "path" "/dev/input/event4"
    [ 6.301] Option "device" "/dev/input/event4"
    [ 6.301] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input4/event4"
    [ 6.301] Option "driver" "evdev"
    [ 6.301] (**) Video Bus: always reports core events
    [ 6.301] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 6.301] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 6.301] (--) evdev: Video Bus: Found keys
    [ 6.301] (II) evdev: Video Bus: Configuring as keyboard
    [ 6.301] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input4/event4"
    [ 6.301] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 6.301] (**) Option "xkb_rules" "evdev"
    [ 6.301] (**) Option "xkb_model" "evdev"
    [ 6.301] (**) Option "xkb_layout" "us"
    [ 6.301] (II) XKB: Reusing cached keymap
    [ 6.301] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 6.302] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.302] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.302] Option "XkbRules" "evdev"
    [ 6.302] Option "XkbModel" "evdev"
    [ 6.302] Option "XkbLayout" "us"
    [ 6.302] Option "_source" "server/udev"
    [ 6.302] Option "name" "Power Button"
    [ 6.302] Option "path" "/dev/input/event1"
    [ 6.302] Option "device" "/dev/input/event1"
    [ 6.302] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 6.302] Option "driver" "evdev"
    [ 6.302] (**) Power Button: always reports core events
    [ 6.302] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 6.302] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.302] (--) evdev: Power Button: Found keys
    [ 6.302] (II) evdev: Power Button: Configuring as keyboard
    [ 6.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 6.302] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 6.302] (**) Option "xkb_rules" "evdev"
    [ 6.302] (**) Option "xkb_model" "evdev"
    [ 6.302] (**) Option "xkb_layout" "us"
    [ 6.302] (II) XKB: Reusing cached keymap
    [ 6.302] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
    [ 6.302] (II) No input driver specified, ignoring this device.
    [ 6.302] (II) This device may have been added with another device file.
    [ 6.302] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 6.302] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 6.302] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 6.302] Option "XkbRules" "evdev"
    [ 6.303] Option "XkbModel" "evdev"
    [ 6.303] Option "XkbLayout" "us"
    [ 6.303] Option "_source" "server/udev"
    [ 6.303] Option "name" "Sleep Button"
    [ 6.303] Option "path" "/dev/input/event2"
    [ 6.303] Option "device" "/dev/input/event2"
    [ 6.303] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    [ 6.303] Option "driver" "evdev"
    [ 6.303] (**) Sleep Button: always reports core events
    [ 6.303] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 6.303] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 6.303] (--) evdev: Sleep Button: Found keys
    [ 6.303] (II) evdev: Sleep Button: Configuring as keyboard
    [ 6.303] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    [ 6.303] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 6.303] (**) Option "xkb_rules" "evdev"
    [ 6.303] (**) Option "xkb_model" "evdev"
    [ 6.303] (**) Option "xkb_layout" "us"
    [ 6.303] (II) XKB: Reusing cached keymap
    [ 6.303] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event10)
    [ 6.303] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
    [ 6.303] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
    [ 6.303] Option "XkbRules" "evdev"
    [ 6.303] Option "XkbModel" "evdev"
    [ 6.303] Option "XkbLayout" "us"
    [ 6.303] Option "_source" "server/udev"
    [ 6.303] Option "name" "Apple Inc. Apple Internal Keyboard / Trackpad"
    [ 6.303] Option "path" "/dev/input/event10"
    [ 6.303] Option "device" "/dev/input/event10"
    [ 6.303] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input10/event10"
    [ 6.304] Option "driver" "evdev"
    [ 6.304] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
    [ 6.304] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event10"
    [ 6.304] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x240
    [ 6.304] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
    [ 6.304] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
    [ 6.304] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input10/event10"
    [ 6.304] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 10)
    [ 6.304] (**) Option "xkb_rules" "evdev"
    [ 6.304] (**) Option "xkb_model" "evdev"
    [ 6.304] (**) Option "xkb_layout" "us"
    [ 6.304] (II) XKB: Reusing cached keymap
    [ 6.304] (II) config/udev: Adding input device bcm5974 (/dev/input/event6)
    [ 6.304] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
    [ 6.304] (**) bcm5974: Applying InputClass "Multitouch Touchpad"
    [ 6.304] (II) LoadModule: "multitouch"
    [ 6.304] (II) Loading /usr/lib/xorg/modules/input/multitouch.so
    [ 6.305] (II) Module multitouch: vendor="X.Org Foundation"
    [ 6.305] compiled for 1.11.99.903, module version = 0.1.0
    [ 6.305] Module class: X.Org XInput Driver
    [ 6.305] ABI class: X.Org XInput driver, version 16.0
    [ 6.305] (II) Using input driver 'multitouch' for 'bcm5974'
    [ 6.305] Option "_source" "server/udev"
    [ 6.305] Option "name" "bcm5974"
    [ 6.305] Option "path" "/dev/input/event6"
    [ 6.305] Option "device" "/dev/input/event6"
    [ 6.305] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/event6"
    [ 6.305] Option "driver" "multitouch"
    [ 6.305] (**) bcm5974: always reports core events
    [ 6.306] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/event6"
    [ 6.306] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 11)
    [ 6.306] (II) device control: init
    [ 6.306] (**) Option "Device" "/dev/input/event6"
    [ 6.311] (II) multitouch: devname: bcm5974
    [ 6.311] (II) multitouch: devid: 5ac 240 1
    [ 6.311] (II) multitouch: caps: left mtdata ibt
    [ 6.311] (II) multitouch: 0: min: 0 max: 2048
    [ 6.311] (II) multitouch: 1: min: 0 max: 2048
    [ 6.311] (II) multitouch: 2: min: 0 max: 2048
    [ 6.311] (II) multitouch: 3: min: 0 max: 2048
    [ 6.311] (II) multitouch: 4: min: -16384 max: 16384
    [ 6.311] (II) multitouch: 5: min: -4620 max: 5140
    [ 6.311] (II) multitouch: 6: min: -150 max: 6600
    [ 6.336] (II) pointer_control
    [ 6.336] (**) bcm5974: (accel) keeping acceleration scheme 1
    [ 6.336] (II) pointer_property
    [ 6.336] (II) pointer_property
    [ 6.336] (**) bcm5974: (accel) acceleration profile 0
    [ 6.336] (II) pointer_property
    [ 6.336] (II) pointer_property
    [ 6.336] (**) bcm5974: (accel) acceleration factor: 2.000
    [ 6.336] (**) bcm5974: (accel) acceleration threshold: 4
    [ 6.337] (II) device control: on
    [ 6.337] (**) Option "Device" "/dev/input/event6"
    [ 6.342] (II) pointer_property
    [ 6.342] (II) pointer_property
    [ 6.342] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
    [ 6.342] (**) bcm5974: Applying InputClass "Multitouch Touchpad"
    [ 6.342] (II) Using input driver 'multitouch' for 'bcm5974'
    [ 6.342] Option "_source" "server/udev"
    [ 6.342] Option "name" "bcm5974"
    [ 6.342] Option "path" "/dev/input/mouse0"
    [ 6.342] Option "device" "/dev/input/mouse0"
    [ 6.342] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/mouse0"
    [ 6.342] Option "driver" "multitouch"
    [ 6.342] (**) bcm5974: always reports core events
    [ 6.342] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/mouse0"
    [ 6.342] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 12)
    [ 6.342] (II) device control: init
    [ 6.342] (**) Option "Device" "/dev/input/mouse0"
    [ 6.342] (EE) multitouch: cannot configure device
    [ 6.342] (EE) Couldn't init device "bcm5974"
    [ 6.342] (II) UnloadModule: "multitouch"
    [ 6.342] (II) config/udev: Adding input device Built-in iSight (/dev/input/event9)
    [ 6.342] (**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
    [ 6.342] (II) Using input driver 'evdev' for 'Built-in iSight'
    [ 6.342] Option "XkbRules" "evdev"
    [ 6.343] Option "XkbModel" "evdev"
    [ 6.343] Option "XkbLayout" "us"
    [ 6.343] Option "_source" "server/udev"
    [ 6.343] Option "name" "Built-in iSight"
    [ 6.343] Option "path" "/dev/input/event9"
    [ 6.343] Option "device" "/dev/input/event9"
    [ 6.343] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input9/event9"
    [ 6.343] Option "driver" "evdev"
    [ 6.343] (**) Built-in iSight: always reports core events
    [ 6.343] (**) evdev: Built-in iSight: Device: "/dev/input/event9"
    [ 6.343] (--) evdev: Built-in iSight: Vendor 0x5ac Product 0x850a
    [ 6.343] (--) evdev: Built-in iSight: Found keys
    [ 6.343] (II) evdev: Built-in iSight: Configuring as keyboard
    [ 6.343] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input9/event9"
    [ 6.343] (II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 12)
    [ 6.343] (**) Option "xkb_rules" "evdev"
    [ 6.343] (**) Option "xkb_model" "evdev"
    [ 6.343] (**) Option "xkb_layout" "us"
    [ 6.343] (II) XKB: Reusing cached keymap
    [ 6.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
    [ 6.343] (II) No input driver specified, ignoring this device.
    [ 6.343] (II) This device may have been added with another device file.
    [ 6.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
    [ 6.343] (II) No input driver specified, ignoring this device.
    [ 6.343] (II) This device may have been added with another device file.
    [ 6.344] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
    [ 6.344] (II) No input driver specified, ignoring this device.
    [ 6.344] (II) This device may have been added with another device file.
    [ 6.344] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 6.344] (II) No input driver specified, ignoring this device.
    [ 6.344] (II) This device may have been added with another device file.
    [ 6.369] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 6.369] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 6.369] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 7.550] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 7.550] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 7.550] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 7.754] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 7.754] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 7.754] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 7.963] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 7.963] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 7.963] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 8.165] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 8.165] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 8.165] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 8.364] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 8.364] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 8.364] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 16.133] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 16.133] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.133] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 16.359] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 16.359] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.359] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 16.560] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 16.560] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.560] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 16.760] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 16.760] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.760] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 16.961] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 16.961] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.961] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 17.159] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 17.159] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 17.159] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    [ 18.008] (II) pointer_control
    [ 18.830] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
    [ 18.830] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 18.830] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
    nvidiafb works fine, but it has no dri and has problems with suspend.
    How to resolve this problem with nouveau? Is it crtc-related or not? Playing with xrandr does not have any effect (except resolution change).
    Last edited by nikicat (2012-02-22 15:00:18)

    I had an issue with my MBA seeing my HP printer and could find no good reason for the issue.  In the end I deleted the printers WiFi connection and then turned around and set it up on my WiFi network all over again.  My MBA now finds the printer every time.  Okay ...so I don't actually know why it didn't work the first time, but it does now.  Again, there was no apparent issue with either the HP printer or the MBA being connected to WiFi in the first place, but something different must have occurred in software/hardware the second time. 

  • Som issues with Nvidia GTX960 - dmesg error output posted

    I have some issues with icons not showing up, eg. in pamac. Just red crosses or what it's called.
    Here is my dmesg error output.
    $ dmesg --level=err,warn
    [ 0.000000] ACPI: RSDP 0x00000000DD7F6000 000024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 0x00000000DD7F6080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000DD8041A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000DD7F6198 00E009 (v02 ALASKA A M I 00000031 INTL 20091112)
    [ 0.000000] ACPI: FACS 0x00000000DDD45080 000040
    [ 0.000000] ACPI: APIC 0x00000000DD8042B8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000DD804350 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: LPIT 0x00000000DD804398 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000DD8043F8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000DD804938 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
    [ 0.000000] ACPI: MCFG 0x00000000DD805410 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000DD805450 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000DD805488 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000DD8057F8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    [ 0.000000] ACPI: BGRT 0x00000000DD808D38 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
    [ 0.006274] ACPI: All ACPI Tables successfully acquired
    [ 0.014978] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.014978] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.016204] Ignoring BGRT: invalid status 0 (expected 1)
    [ 0.102300] #2 #3 #4 #5 #6 #7
    [ 0.263542] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.265355] ACPI: Dynamic OEM Table Load:
    [ 0.265358] ACPI: SSDT 0xFFFF8807FA42A800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.265733] ACPI: Dynamic OEM Table Load:
    [ 0.265736] ACPI: SSDT 0xFFFF8807FA419800 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.266134] ACPI: Dynamic OEM Table Load:
    [ 0.266135] ACPI: SSDT 0xFFFF8807FA46DA00 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 0.267060] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
    [ 0.267063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
    [ 0.285136] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.793801] ata1.00: supports DRM functions and may not be fully accessible
    [ 0.794140] ata1.00: supports DRM functions and may not be fully accessible
    [ 0.794388] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
    [ 0.794391] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
    [ 0.795480] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
    [ 0.795482] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
    [ 1.018384] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.018386] usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.040606] systemd-journald[181]: Failed to set file attributes: Inappropriate ioctl for device
    [ 1.114596] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
    [ 1.230333] nvidia: module license 'NVIDIA' taints kernel.
    [ 1.230335] Disabling lock debugging due to kernel taint
    [ 1.235547] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015
    [ 2.072087] NVRM: Your system is not currently configured to drive a VGA console
    [ 2.072090] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    [ 2.072091] NVRM: requires the use of a text-mode VGA console. Use of other console
    [ 2.072091] NVRM: drivers including, but not limited to, vesafb, may result in
    [ 2.072092] NVRM: corruption and stability problems, and is not supported.
    My hardware is a desktop with i7 4790K (4 cores with HT enabled) ASUS Z87-K motherboard, 32 GB Corsair 1600 MHz RAM. Samsung 850 PRO 1 TB SSD.
    My inxi -F
    System: Host: archie Kernel: 4.0.5-1-ARCH x86_64 (64 bit) Desktop: Xfce 4.12.2 Distro: Arch Linux
    Machine: System: ASUS product: All Series
    Mobo: ASUSTeK model: Z87-K v: Rev X.0x serial: 130612439103584
    Bios: American Megatrends v: 1402 date: 11/05/2014
    CPU: Quad core Intel Core i7-4790K (-HT-MCP-) cache: 8192 KB
    clock speeds: max: 4400 MHz 1: 4000 MHz 2: 4002 MHz 3: 4000 MHz 4: 4000 MHz 5: 4256 MHz
    6: 4001 MHz 7: 4002 MHz 8: 4002 MHz
    Graphics: Card: NVIDIA GM206 [GeForce GTX 960]
    Display Server: X.org 1.17.2 driver: nvidia tty size: 108x41 Advanced Data: N/A for root
    Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel
    Card-2 NVIDIA Device 0fba driver: snd_hda_intel
    Sound: Advanced Linux Sound Architecture v: k4.0.5-1-ARCH
    Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
    IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <masked>
    Drives: HDD Total Size: 1024.2GB (4.4% used) ID-1: /dev/sda model: Samsung_SSD_850 size: 1024.2GB
    Partition: ID-1: / size: 48G used: 13G (27%) fs: ext4 dev: /dev/sda3
    ID-2: /home size: 769G used: 154M (1%) fs: ext4 dev: /dev/sda4
    ID-3: /boot size: 511M used: 25M (5%) fs: vfat dev: /dev/sda1
    ID-4: swap-1 size: 33.55GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
    Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
    Fan Speeds (in rpm): cpu: N/A
    Info: Processes: 172 Uptime: 10 min Memory: 1133.0/32119.5MB Client: Shell (sudo) inxi: 2.2.25
    Have I missed something to post?
    Last edited by dockland (2015-06-17 20:30:48)

    I read that this line in my case
    [ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
    is a bug and unfixable.
    What does that mean and why is it "unfixable"? Is that some hardware that is not compatible with Arch at all?

  • GDM and Gnome graphical issues with Nvidia card

    Hi !
    I want to install archlinux with cinnamon as desktop environment on the computer of a friend, but I have some issue with it, and especially with (I think) the graphic card, it's a Nvidia GeForce FX 5200LE.
    I tried installing nvidia-173xx from the aur first. I installed gdm, but it's extremly slow, as a result that I can't log in (nevertheless the mouse is fluid..)  the cpu is not so much used yet, and it's the same thing in the cinnamon session or the gnome session (I tried installing lightdm to log in which works fine). Moreover, in the session I've got some strange graphical things, such as some missing white pixels, or a blue window when I launch nautilus, ... (here are some screenshots : http://i49.tinypic.com/2efhm6s.png and a with a window : http://i46.tinypic.com/116m05k.png)
    I tried to install the nouveau driver instead, and now gdm don't freeze, I can log in, but there is always these strange graphical issues.
    Is the graphic card too old for gnome ? Or did I forget something ?
    Thank you in advance for your help !! And sorry for my english ..
    Here are some log with the nouveau driver :
    - Xorg.log :
    [ 9.026]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 9.026] X Protocol Version 11, Revision 0
    [ 9.026] Build Operating System: Linux 3.4.8-1-ARCH i686
    [ 9.026] Current Operating System: Linux famille-workstation 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 08:15:06 UTC 2012 i686
    [ 9.026] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=83840f06-da6c-4558-a8ef-8ed779442ff3 ro quiet pci=nomsi
    [ 9.026] Build Date: 27 August 2012 08:08:29AM
    [ 9.026]
    [ 9.026] Current version of pixman: 0.26.2
    [ 9.026] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 9.026] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 9.027] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 5 13:26:01 2012
    [ 9.053] (==) Using config file: "/etc/X11/xorg.conf"
    [ 9.053] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 9.072] (==) No Layout section. Using the first Screen section.
    [ 9.072] (==) No screen section available. Using defaults.
    [ 9.072] (**) |-->Screen "Default Screen Section" (0)
    [ 9.072] (**) | |-->Monitor "<default monitor>"
    [ 9.074] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 9.074] (**) Option "AIGLX" "off"
    [ 9.074] (==) Automatically adding devices
    [ 9.074] (==) Automatically enabling devices
    [ 9.127] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 9.127] Entry deleted from font path.
    [ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 9.128] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
    [ 9.128] Entry deleted from font path.
    [ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/Type1/").
    [ 9.128] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 9.128] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 9.128] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 9.128] (II) Loader magic: 0x82225a0
    [ 9.128] (II) Module ABI versions:
    [ 9.128] X.Org ANSI C Emulation: 0.4
    [ 9.128] X.Org Video Driver: 12.1
    [ 9.128] X.Org XInput driver : 16.0
    [ 9.128] X.Org Server Extension : 6.0
    [ 9.129] (--) PCI:*(0:1:0:0) 10de:0323:107d:1334 rev 161, Mem @ 0xe0000000/16777216, 0xd8000000/134217728, BIOS @ 0x????????/131072
    [ 9.129] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 9.129] (II) LoadModule: "extmod"
    [ 9.145] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 9.156] (II) Module extmod: vendor="X.Org Foundation"
    [ 9.156] compiled for 1.12.4, module version = 1.0.0
    [ 9.156] Module class: X.Org Server Extension
    [ 9.156] ABI class: X.Org Server Extension, version 6.0
    [ 9.156] (II) Loading extension MIT-SCREEN-SAVER
    [ 9.156] (II) Loading extension XFree86-VidModeExtension
    [ 9.156] (II) Loading extension XFree86-DGA
    [ 9.156] (II) Loading extension DPMS
    [ 9.156] (II) Loading extension XVideo
    [ 9.156] (II) Loading extension XVideo-MotionCompensation
    [ 9.156] (II) Loading extension X-Resource
    [ 9.156] (II) LoadModule: "dbe"
    [ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 9.157] (II) Module dbe: vendor="X.Org Foundation"
    [ 9.157] compiled for 1.12.4, module version = 1.0.0
    [ 9.157] Module class: X.Org Server Extension
    [ 9.157] ABI class: X.Org Server Extension, version 6.0
    [ 9.157] (II) Loading extension DOUBLE-BUFFER
    [ 9.157] (II) LoadModule: "glx"
    [ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 9.164] (II) Module glx: vendor="X.Org Foundation"
    [ 9.164] compiled for 1.12.4, module version = 1.0.0
    [ 9.164] ABI class: X.Org Server Extension, version 6.0
    [ 9.164] (**) AIGLX disabled
    [ 9.165] (II) Loading extension GLX
    [ 9.165] (II) LoadModule: "record"
    [ 9.165] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 9.166] (II) Module record: vendor="X.Org Foundation"
    [ 9.166] compiled for 1.12.4, module version = 1.13.0
    [ 9.166] Module class: X.Org Server Extension
    [ 9.166] ABI class: X.Org Server Extension, version 6.0
    [ 9.166] (II) Loading extension RECORD
    [ 9.166] (II) LoadModule: "dri"
    [ 9.166] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 9.172] (II) Module dri: vendor="X.Org Foundation"
    [ 9.172] compiled for 1.12.4, module version = 1.0.0
    [ 9.172] ABI class: X.Org Server Extension, version 6.0
    [ 9.172] (II) Loading extension XFree86-DRI
    [ 9.172] (II) LoadModule: "dri2"
    [ 9.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 9.173] (II) Module dri2: vendor="X.Org Foundation"
    [ 9.173] compiled for 1.12.4, module version = 1.2.0
    [ 9.173] ABI class: X.Org Server Extension, version 6.0
    [ 9.173] (II) Loading extension DRI2
    [ 9.173] (==) Matched nouveau as autoconfigured driver 0
    [ 9.173] (==) Matched nvidia as autoconfigured driver 1
    [ 9.173] (==) Matched nv as autoconfigured driver 2
    [ 9.173] (==) Matched vesa as autoconfigured driver 3
    [ 9.173] (==) Matched fbdev as autoconfigured driver 4
    [ 9.173] (==) Assigned the driver to the xf86ConfigLayout
    [ 9.173] (II) LoadModule: "nouveau"
    [ 9.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 9.191] (II) Module nouveau: vendor="X.Org Foundation"
    [ 9.191] compiled for 1.12.2, module version = 1.0.1
    [ 9.191] Module class: X.Org Video Driver
    [ 9.191] ABI class: X.Org Video Driver, version 12.0
    [ 9.191] (II) LoadModule: "nvidia"
    [ 9.191] (WW) Warning, couldn't open module nvidia
    [ 9.191] (II) UnloadModule: "nvidia"
    [ 9.191] (II) Unloading nvidia
    [ 9.192] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 9.192] (II) LoadModule: "nv"
    [ 9.192] (WW) Warning, couldn't open module nv
    [ 9.192] (II) UnloadModule: "nv"
    [ 9.192] (II) Unloading nv
    [ 9.192] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 9.192] (II) LoadModule: "vesa"
    [ 9.192] (WW) Warning, couldn't open module vesa
    [ 9.192] (II) UnloadModule: "vesa"
    [ 9.192] (II) Unloading vesa
    [ 9.192] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 9.192] (II) LoadModule: "fbdev"
    [ 9.193] (WW) Warning, couldn't open module fbdev
    [ 9.193] (II) UnloadModule: "fbdev"
    [ 9.193] (II) Unloading fbdev
    [ 9.193] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 9.193] (II) NOUVEAU driver
    [ 9.193] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 9.193] RIVA TNT (NV04)
    [ 9.193] RIVA TNT2 (NV05)
    [ 9.193] GeForce 256 (NV10)
    [ 9.193] GeForce 2 (NV11, NV15)
    [ 9.193] GeForce 4MX (NV17, NV18)
    [ 9.193] GeForce 3 (NV20)
    [ 9.193] GeForce 4Ti (NV25, NV28)
    [ 9.193] GeForce FX (NV3x)
    [ 9.193] GeForce 6 (NV4x)
    [ 9.193] GeForce 7 (G7x)
    [ 9.193] GeForce 8 (G8x)
    [ 9.193] GeForce GTX 200 (NVA0)
    [ 9.193] GeForce GTX 400 (NVC0)
    [ 9.193] (++) using VT number 7
    [ 9.196] drmOpenDevice: node name is /dev/dri/card0
    [ 9.196] drmOpenDevice: open result is 7, (OK)
    [ 9.196] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 9.196] drmOpenDevice: node name is /dev/dri/card0
    [ 9.196] drmOpenDevice: open result is 7, (OK)
    [ 9.196] drmOpenByBusid: drmOpenMinor returns 7
    [ 9.196] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 9.196] (II) [drm] nouveau interface version: 1.0.0
    [ 9.196] (II) Loading sub module "dri"
    [ 9.196] (II) LoadModule: "dri"
    [ 9.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 9.197] (II) Module dri: vendor="X.Org Foundation"
    [ 9.197] compiled for 1.12.4, module version = 1.0.0
    [ 9.197] ABI class: X.Org Server Extension, version 6.0
    [ 9.197] (II) NOUVEAU(0): Loaded DRI module
    [ 9.197] drmOpenDevice: node name is /dev/dri/card0
    [ 9.197] drmOpenDevice: open result is 8, (OK)
    [ 9.197] drmOpenDevice: node name is /dev/dri/card0
    [ 9.197] drmOpenDevice: open result is 8, (OK)
    [ 9.197] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 9.197] drmOpenDevice: node name is /dev/dri/card0
    [ 9.197] drmOpenDevice: open result is 8, (OK)
    [ 9.197] drmOpenByBusid: drmOpenMinor returns 8
    [ 9.197] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 9.197] (II) [drm] DRM interface version 1.4
    [ 9.197] (II) [drm] DRM open master succeeded.
    [ 9.197] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
    [ 9.197] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 9.197] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 9.197] (==) NOUVEAU(0): RGB weight 888
    [ 9.197] (==) NOUVEAU(0): Default visual is TrueColor
    [ 9.197] (==) NOUVEAU(0): Using HW cursor
    [ 9.197] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 9.197] (==) NOUVEAU(0): Page flipping enabled
    [ 9.197] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 9.227] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 9.280] (II) NOUVEAU(0): Output TV-1 has no monitor section
    [ 9.309] (II) NOUVEAU(0): EDID for output VGA-1
    [ 9.309] (II) NOUVEAU(0): Manufacturer: SAM Model: 1b Serial#: 1195913527
    [ 9.309] (II) NOUVEAU(0): Year: 2003 Week: 16
    [ 9.309] (II) NOUVEAU(0): EDID Version: 1.3
    [ 9.309] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 9.309] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
    [ 9.309] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
    [ 9.309] (II) NOUVEAU(0): Gamma: 2.40
    [ 9.309] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 9.309] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 9.309] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
    [ 9.309] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
    [ 9.309] (II) NOUVEAU(0): Supported established timings:
    [ 9.309] (II) NOUVEAU(0): 720x400@70Hz
    [ 9.309] (II) NOUVEAU(0): 640x480@60Hz
    [ 9.309] (II) NOUVEAU(0): 640x480@67Hz
    [ 9.309] (II) NOUVEAU(0): 640x480@72Hz
    [ 9.310] (II) NOUVEAU(0): 640x480@75Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@56Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@60Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@72Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@75Hz
    [ 9.310] (II) NOUVEAU(0): 832x624@75Hz
    [ 9.310] (II) NOUVEAU(0): 1024x768@60Hz
    [ 9.310] (II) NOUVEAU(0): 1024x768@70Hz
    [ 9.310] (II) NOUVEAU(0): 1024x768@75Hz
    [ 9.310] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 9.310] (II) NOUVEAU(0): 1152x864@75Hz
    [ 9.310] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 9.310] (II) NOUVEAU(0): Supported standard timings:
    [ 9.310] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 9.310] (II) NOUVEAU(0): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
    [ 9.310] (II) NOUVEAU(0): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
    [ 9.310] (II) NOUVEAU(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
    [ 9.310] (II) NOUVEAU(0): Supported detailed timing:
    [ 9.310] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
    [ 9.310] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 9.310] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 9.310] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 9.310] (II) NOUVEAU(0): Monitor name: SyncMaster
    [ 9.310] (II) NOUVEAU(0): Serial No: HJGW403719
    [ 9.310] (II) NOUVEAU(0): EDID (in hex):
    [ 9.310] (II) NOUVEAU(0): 00ffffffffffff004c2d1b0037314847
    [ 9.310] (II) NOUVEAU(0): 100d01030f221b8cea6f8ba25a4d9424
    [ 9.310] (II) NOUVEAU(0): 1a5156bfef8081806140454031400101
    [ 9.310] (II) NOUVEAU(0): 010101010101302a009851002a403070
    [ 9.310] (II) NOUVEAU(0): 1300520e1100001e000000fd00384c1e
    [ 9.310] (II) NOUVEAU(0): 510e000a202020202020000000fc0053
    [ 9.310] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
    [ 9.310] (II) NOUVEAU(0): 00484a47573430333731390a20200057
    [ 9.310] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 9.310] (II) NOUVEAU(0): Using EDID range info for horizontal sync
    [ 9.310] (II) NOUVEAU(0): Using EDID range info for vertical refresh
    [ 9.310] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 9.310] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 9.311] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 9.363] (II) NOUVEAU(0): EDID for output TV-1
    [ 9.363] (II) NOUVEAU(0): Output VGA-1 connected
    [ 9.363] (II) NOUVEAU(0): Output TV-1 disconnected
    [ 9.363] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 9.363] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
    [ 9.363] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 9.363] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 106.5 MHz (scaled from 0.0 MHz), 62.8 kHz, 74.9 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 102.2 MHz (scaled from 0.0 MHz), 60.3 kHz, 74.9 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 9.364] (**) NOUVEAU(0): Mode "1024x576": 47.0 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 9.364] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
    [ 9.364] (**) NOUVEAU(0): DPI set to (95, 96)
    [ 9.364] (II) Loading sub module "fb"
    [ 9.364] (II) LoadModule: "fb"
    [ 9.364] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 9.375] (II) Module fb: vendor="X.Org Foundation"
    [ 9.375] compiled for 1.12.4, module version = 1.0.0
    [ 9.375] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 9.375] (II) Loading sub module "exa"
    [ 9.375] (II) LoadModule: "exa"
    [ 9.376] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 9.380] (II) Module exa: vendor="X.Org Foundation"
    [ 9.380] compiled for 1.12.4, module version = 2.5.0
    [ 9.380] ABI class: X.Org Video Driver, version 12.1
    [ 9.380] (II) Loading sub module "shadowfb"
    [ 9.380] (II) LoadModule: "shadowfb"
    [ 9.380] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 9.382] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 9.382] compiled for 1.12.4, module version = 1.0.0
    [ 9.382] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 9.382] (--) Depth 24 pixmap format is 32 bpp
    [ 9.382] (II) NOUVEAU(0): Opened GPU channel 1
    [ 9.384] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 9.384] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 9.384] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 9.399] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 9.399] (II) EXA(0): Driver registered support for the following operations:
    [ 9.399] (II) Solid
    [ 9.399] (II) Copy
    [ 9.399] (II) Composite (RENDER acceleration)
    [ 9.399] (II) UploadToScreen
    [ 9.399] (II) DownloadFromScreen
    [ 9.399] (==) NOUVEAU(0): Backing store disabled
    [ 9.399] (==) NOUVEAU(0): Silken mouse enabled
    [ 9.399] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
    [ 9.399] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 9.399] (==) NOUVEAU(0): DPMS enabled
    [ 9.399] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 9.399] (--) RandR disabled
    [ 9.399] (II) Initializing built-in extension Generic Event Extension
    [ 9.399] (II) Initializing built-in extension SHAPE
    [ 9.399] (II) Initializing built-in extension MIT-SHM
    [ 9.400] (II) Initializing built-in extension XInputExtension
    [ 9.400] (II) Initializing built-in extension XTEST
    [ 9.400] (II) Initializing built-in extension BIG-REQUESTS
    [ 9.400] (II) Initializing built-in extension SYNC
    [ 9.400] (II) Initializing built-in extension XKEYBOARD
    [ 9.400] (II) Initializing built-in extension XC-MISC
    [ 9.400] (II) Initializing built-in extension SECURITY
    [ 9.400] (II) Initializing built-in extension XINERAMA
    [ 9.400] (II) Initializing built-in extension XFIXES
    [ 9.400] (II) Initializing built-in extension RENDER
    [ 9.400] (II) Initializing built-in extension RANDR
    [ 9.400] (II) Initializing built-in extension COMPOSITE
    [ 9.400] (II) Initializing built-in extension DAMAGE
    [ 9.800] (II) AIGLX: Loaded and initialized swrast
    [ 9.800] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 9.807] (II) NOUVEAU(0): NVEnterVT is called.
    [ 9.807] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
    [ 9.807] resize called 1280 1024
    [ 10.066] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 10.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 10.066] (II) LoadModule: "evdev"
    [ 10.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 10.075] (II) Module evdev: vendor="X.Org Foundation"
    [ 10.075] compiled for 1.12.3.901, module version = 2.7.3
    [ 10.075] Module class: X.Org XInput Driver
    [ 10.075] ABI class: X.Org XInput driver, version 16.0
    [ 10.075] (II) Using input driver 'evdev' for 'Power Button'
    [ 10.076] (**) Power Button: always reports core events
    [ 10.076] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 10.076] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 10.076] (--) evdev: Power Button: Found keys
    [ 10.076] (II) evdev: Power Button: Configuring as keyboard
    [ 10.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 10.076] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 10.076] (**) Option "xkb_rules" "evdev"
    [ 10.076] (**) Option "xkb_model" "evdev"
    [ 10.076] (**) Option "xkb_layout" "us"
    [ 10.117] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 10.117] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 10.117] (II) Using input driver 'evdev' for 'Power Button'
    [ 10.117] (**) Power Button: always reports core events
    [ 10.117] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 10.118] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 10.118] (--) evdev: Power Button: Found keys
    [ 10.118] (II) evdev: Power Button: Configuring as keyboard
    [ 10.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 10.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 10.118] (**) Option "xkb_rules" "evdev"
    [ 10.118] (**) Option "xkb_model" "evdev"
    [ 10.118] (**) Option "xkb_layout" "us"
    [ 10.118] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 10.118] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 10.118] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 10.119] (**) AT Translated Set 2 keyboard: always reports core events
    [ 10.119] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 10.119] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 10.119] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 10.119] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 10.119] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 10.119] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 10.119] (**) Option "xkb_rules" "evdev"
    [ 10.119] (**) Option "xkb_model" "evdev"
    [ 10.119] (**) Option "xkb_layout" "us"
    [ 10.120] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 10.120] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    [ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    [ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    [ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
    [ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 10.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
    [ 10.120] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
    [ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
    [ 10.121] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
    [ 10.121] (II) No input driver specified, ignoring this device.
    [ 10.121] (II) This device may have been added with another device file.
    [ 10.121] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 10.121] (II) No input driver specified, ignoring this device.
    [ 10.121] (II) This device may have been added with another device file.
    [ 10.174] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 10.174] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 10.174] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 10.174] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 14.960] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 14.960] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 14.960] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 14.960] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 14.960] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 84.256] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 111.559] (II) NOUVEAU(0): NVEnterVT is called.
    [ 111.601] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 111.601] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 111.601] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 111.601] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 111.601] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 119.891] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 119.891] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 119.891] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 119.892] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 119.892] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 121.162] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 121.162] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 121.162] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 121.163] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 121.163] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 122.743] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 122.743] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 122.743] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 122.744] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 122.744] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 138.896] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 167.669] (II) NOUVEAU(0): NVEnterVT is called.
    [ 167.720] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 167.720] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 167.720] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 167.720] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 186.390] (II) NOUVEAU(0): NVLeaveVT is called.
    - .xsession-errors in gnome session :
    GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
    GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
    GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
    GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
    GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
    SSH_AUTH_SOCK=/home/olivier/.cache/keyring-D3uSoF/ssh
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    Failed to play sound: File or data not found
    ** Message: applet now removed from the notification area
    ** Message: applet now embedded in the notification area
    Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
    Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    (gnome-shell:700): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
    Individuals will not be linked properly and creating new links between Personas will not work.
    The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
    (gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
    (gnome-settings-daemon:657): color-plugin-WARNING **: Done switch to new account, reload devices
    (gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
    (gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
    Last edited by Jejel59 (2012-09-06 11:34:53)

    I'm no expert on reading the xsession errors, but I had all sorts of problems running gnome3 with my machine of the same vintage.   Cinamon is based on gnome3.  I switched to Mate which is a re-packaging of the old gnome2 along with Compiz for the window manager and all works well.
    I strongly suspect that they are using the newer OpenGL 4 API.  The Nvidia FX5200 is stuck at OpenGL 2.1.

  • Issue with sdcard slot Acer V5-171

    Hi I have an issue with my card reader where it mounts if it is inserted on boot but if I where to remove it and replace it will not remount or if I where to insert it after boot.
    I get this message occurring in a loop after I remove the sd card slot when i dmesg:
    [44275.629829] mmc0: Timeout waiting for hardware interrupt.
    any help would be appreciated

    So out of curiosity should I have the pciehp file in my modprobe.d dir, cause that its empty
    But when I use modinfo pciehp I get :
    filename:       /lib/modules/3.7.5-1-ARCH/kernel/drivers/pci/hotplug/pciehp.ko.gz
    license:        GPL
    description:    PCI Express Hot Plug Controller Driver
    author:         Dan Zink <[email protected]>, Greg Kroah-Hartman <[email protected]>, Dely Sy <[email protected]>
    depends:        pci_hotplug
    intree:         Y
    vermagic:       3.7.5-1-ARCH SMP preempt mod_unload modversions
    parm:           pciehp_detect_mode:Slot detection mode: pcie, acpi, auto
      pcie          - Use PCIe based slot detection
      acpi          - Use ACPI for slot detection
      auto(default) - Auto select mode. Use acpi option if duplicate
                      slot ids are found. Otherwise, use pcie option
    (charp)
    parm:           pciehp_debug:Debugging mode enabled or not (bool)
    parm:           pciehp_poll_mode:Using polling mechanism for hot-plug events or not (bool)
    parm:           pciehp_poll_time:Polling mechanism frequency, in seconds (int)
    parm:           pciehp_force:Force pciehp, even if OSHP is missing (bool)
    So I appear to have some sort of pciehp module.

  • Issues with Creative Cloud for teams deployment workflow

    The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
    First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
    [Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
    Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
    Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    It can be installed from command line by:
    Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
    Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
    Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

    Hi Boncker,
    I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
    Please do let us know if that worked for you or not .
    Cheers,
    Kartikay Sharma

  • Issue with magsafe/charging (blinks green, amber, off)

    Having a quirky issue with my mid-2009 Macbook Pro.
    A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
    At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
    Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
    But the problem still exists.
    The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
    I have reset the SMC a couple times actually, but no change.
    Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
    Thanks!

    Try resetting the system management controller
    http://support.apple.com/kb/HT3964?viewlocale=en_US
    If that did nothing for you,  try resetting the NVRAM
    https://support.apple.com/kb/HT1379

  • Issue With Page Break When Sorting is also applied on group

    Hi
    I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
    The following is the sample XML
    <ROWSET>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Accounts</ORGANIZATION>
    <FULL_NAME>test1,</FULL_NAME>
    <ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
    <CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
    <RUN_VALUE>250</RUN_VALUE>
    <MONTH_VALUE>500</MONTH_VALUE>
    <QUARTER_VALUE>500</QUARTER_VALUE>
    <YEAR_VALUE>500</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test2</FULL_NAME>
    <ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
    <CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
    <RUN_VALUE>5.19</RUN_VALUE>
    <MONTH_VALUE>10.38</MONTH_VALUE>
    <QUARTER_VALUE>10.38</QUARTER_VALUE>
    <YEAR_VALUE>10.38</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test3</FULL_NAME>
    <ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>19.67</RUN_VALUE>
    <MONTH_VALUE>39.34</MONTH_VALUE>
    <QUARTER_VALUE>39.34</QUARTER_VALUE>
    <YEAR_VALUE>39.34</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test4</FULL_NAME>
    <ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>0</RUN_VALUE>
    <MONTH_VALUE>360</MONTH_VALUE>
    <QUARTER_VALUE>360</QUARTER_VALUE>
    <YEAR_VALUE>360</YEAR_VALUE>
    </ROW>
    </ROWSET>
    In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
    When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
    But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
    kumar

    Hi All,
    I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
    When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
    Can anybody throw some light on this?
    FYI...
    I am using this code:
    ?if: position() mod 6= 0?
    ?split-by-page-break:?
    ?end if?
    (Of course with in tags)
    in G_LINES loop.
    Can anybody help me out :-(
    --Saritha                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Issue with PTO (Paid Time Off) quota generation

    Hi All,
    We have an issue with quota generation of PTO for our employees.
    The issue goes like this:
    We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
    we have  paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
    we have the following logic that has to go in this config:
    -- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
    -- Depending on the working hours of  the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
    I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible.  I really need this to get it done ASAP. Looking forward for help.
    Thanks,
    Chowdary.

    We use TM00 schema. Can i call TS15 and TS 12  rules into TM00 acheieve my issue of quota entilements?
    Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
    As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

  • Issues with iMessage when switching data carrier (wifi - cellular)

    So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

    Hi there BigDogg795,
    I would recommend taking a look at the troubleshooting steps for iMessage found in the article below. 
    iOS: Troubleshooting Messages - Apple Support
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    -Griff W.

  • Issues with WebForm performance

    Hi,
    We had migrated a new application from UAT to PROD and we encounter webform performance issues with the following actions..
    After login, the first form you open it is
    always slow. After this you can switch from one form to another without a
    delay.
    Then once you change any data – the next time
    you access a form it gets delayed.
    The point to be noted is, it doesnt have any performance issues in the UAT environment and the configuration settings,essbase cache settings are all the same. We did try to move the EPM system to a new server to see if this is a hardware issue but no luck, the performance issues still exist. The consumption of the CPU/memory has been checked and it is proved that the form opening delay has nothing to do with lack of memory.
    The JVM head settings is set up at 4GB which is infact higher than that of the UAT environment(2GB).
    runs on Windows server2008,11.1.2.1.600 EPM serve, has planning,reporting,foundation on one server (32GB ram) and essbase on another server (32GB ram). Any help is appreciated.
    Please find attached the planning logs below and there is nothing mentioned in the hyperionplanning error logs.-----------------------------------------------------------------------------------------------------------------------------------------------------------------
    <Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Nov 5, 2013 8:05:44 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Nov 5, 2013 8:05:46 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0  Fri Dec 17 20:47:33 PST 2010 1384255 >
    <Nov 5, 2013 8:05:48 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Nov 5, 2013 8:05:48 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Nov 5, 2013 8:05:48 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
    <Nov 5, 2013 8:06:22 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getDomainConfiguration()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getRuntimeService()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
      return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Domain location is 'C:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Checking C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
    EPM_ORACLE_HOME: C:\Oracle\Middleware\EPMSystem11R1
    Template for PLANNING#11.1.2.0: C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
    Dependencies for C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
    BPMUI shared webapp not referenced from PLANNING#11.1.2.0
    Application name: PLANNING#11.1.2.0
    Application source: HyperionPlanning.ear
    Server name: Planning0
    Server port: 8300
    Server SSL port: 8343
    Application context: HyperionPlanning
    Registry product type: PLANNING_PRODUCT
    Registry physical web application type: PLANNING_WEBAPP
    weblogic.Name property is 'Planning0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for PLANNING#11.1.2.0
    EPM_ORACLE_INSTANCE: C:\Oracle\Middleware\user_projects\epmsystem1
    Physical Web App found
    Web app already linked to some application server: false
    The registry was not modifyed because it already containse all sturctures
    Web app is already linked to the logical web app
    No needs to run custom updater for PLANNING#11.1.2.0
    loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
    Planning locale: en_US
    <Nov 5, 2013 8:06:39 PM CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
    <Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Nov 5, 2013 8:07:09 PM CET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <Nov 5, 2013 8:07:10 PM CET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
      Version: V3
      Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 512 bits
      modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
      public exponent: 65537
      Validity: [From: Thu Mar 21 21:12:27 CET 2002,
                   To: Tue Mar 22 21:12:27 CET 2022]
      Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
      Key_CertSign
      Algorithm: [MD5withRSA]
      Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82  .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4  .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF  .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C  .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.83.72.22:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.83.72.22:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Warning> <Server> <BEA-002611> <Hostname "WIPLPRD01.svc.unicc.org", maps to multiple IP addresses: 10.83.72.22, 0:0:0:0:0:0:0:1>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
    <Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;C:\Oracle\Middleware\EPMSystem11R1/bin;C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;C:\Oracle\MIDDLE~1\JROCKI~1\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
    EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
    using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    Reaquired task list lease: Tue Nov 05 20:11:49 CET 2013: 1383678709156
    Seeking ESAPI.properties
      Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\ESAPI.properties
    Loaded 'ESAPI.properties' properties file
    Seeking validation.properties
      Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\validation.properties
    Loaded 'validation.properties' properties file
    Seeking antisamy-esapi.xml
      Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\antisamy-esapi.xml
    EnterData_Inner Processing Time:424
    2013-11-05 20:14:47,454 INFO Thread-51 calcmgr.launch - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
    - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
    2013-11-05 20:14:54,066 INFO Thread-51 calcmgr.launch - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
    - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
    EnterData_Inner Processing Time:64
    EnterData_Inner Processing Time:15
    EnterData_Inner Processing Time:359
    EnterData_Inner Processing Time:2
    EnterData_Inner Processing Time:53
    EnterData_Inner Processing Time:4
    EnterData_Inner Processing Time:7
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    Setting HBR Mode to: 2
    In lookupBRLWA()
    Found HBR product = ESSBASE_PRODUCT
    Found HBR product = ESSBASE_PRODUCT
    Found HBR product = ESSBASE_PRODUCT
    HBR LWA Component = Default
    Default HBR = http://WIPLPRD01.svc.unicc.org:19000/eas
    In getDBDetails()
    Found HBR product = ESSBASE_PRODUCT
    In lookupBRLWA()
    Found HBR product = ESSBASE_PRODUCT
    Found HBR product = ESSBASE_PRODUCT
    =2013-11-05 20:35:08,234 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
    - Error retrieving user by identity
    Embedded HBR initialized.
    EnterData_Inner Processing Time:6
    EnterData_Inner Processing Time:867
    [Tue Nov 05 20:35:33 CET 2013] Planning successfully notified HBR repository.
    EnterData_Inner Processing Time:7
    2013-11-05 20:40:38,613 INFO Thread-67 calcmgr.launch - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
    - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
    2013-11-05 20:40:47,241 INFO Thread-67 calcmgr.launch - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
    - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
    EnterData_Inner Processing Time:44
    EnterData_Inner Processing Time:2
    EnterData_Inner Processing Time:525
    EnterData_Inner Processing Time:1
    Reaquired task list lease: Tue Nov 05 20:41:49 CET 2013: 1383680509246

    I already replied there but it seems no moderator is willing to approve my reply so it never shows up.
    So I'll try replying in here instead:
    I never thought it could be an emulator issue, I thought I had done something wrong to begin with. So I take having performance issues with tiled layer is not a common problem I suppose?
    I'm using MOTODEV SDK platform, A1200 model (motorola).

  • Issues with using 3 monitors on 2 external gpu

    Hi,
    I have some issues with configuring Xorg to use 3 monitors. I have 2 external graphic cards (same model, no SLI). Monitors connected to the first gpu are recognized ok but I can't configure my 3rd monitor conencted to the second gpu via HDMI nor DVI.
    1st is recognized as DVI-I-1, 2nd is DP-1 in first card, 3rd monitor is in second card (bus 22:00.0) as DP-1-2 (also tried connecting as DVI-I-2). I can see them in Xorg log but I can't configure my 3rd monitor via kscreen nor xrandr. :-/
    lspci |grep VGA:
    03:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    22:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    xrandr:
    Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
    DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    DP-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    Xorg config (autoconfig enable only 2 monitors, I generated config and tried to edit it with no luck, I noticed there is PCI:34:0:0 generated by Xorg so I also tried to change it to 22:0:0, I also tried to add that option "Monitor-<output>" but same result):
    Section "ServerLayout"
    Identifier "X.org Configured"
    #Screen 0 "Screen0" 0 0
    #Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "DELL"
    Option "Monitor-DVI-I-1" "DVI-I-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "DELL"
    Option "Monitor-DP-1" "DP-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor2"
    VendorName "DELL"
    Option "Monitor-DP-1-2" "DP-1-2"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nouveau"
    BusID "PCI:3:0:0"
    Option "Monitor-DVI-I-1"
    Option "Monitor-DP-1"
    EndSection
    Section "Device"
    Identifier "Card1"
    Driver "nouveau"
    BusID "PCI:34:0:0"
    Option "Monitor-DP-1-2"
    EndSection
    Xorg log (I can see that monitor at time 1767.316):
    [ 1766.959]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1766.960] X Protocol Version 11, Revision 0
    [ 1766.960] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1766.960] Current Operating System: Linux CZ09DT1XM5002 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
    [ 1766.960] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e2c593e5-b0f4-4c74-84fd-5a88db345ca4 rw quiet
    [ 1766.961] Build Date: 13 December 2013 03:11:42PM
    [ 1766.962]
    [ 1766.962] Current version of pixman: 0.32.4
    [ 1766.963] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1766.963] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1766.965] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jan 2 12:43:56 2014
    [ 1766.965] (++) Using config file: "/etc/X11/xorg.conf.d/20-multimonitor.conf"
    [ 1766.966] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1766.966] (==) ServerLayout "X.org Configured"
    [ 1766.966] (==) No screen section available. Using defaults.
    [ 1766.966] (**) |-->Screen "Default Screen Section" (0)
    [ 1766.966] (**) | |-->Monitor "<default monitor>"
    [ 1766.966] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 1766.966] (**) | |-->Device "Card0"
    [ 1766.966] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 1766.966] (**) |-->Input Device "Mouse0"
    [ 1766.966] (**) |-->Input Device "Keyboard0"
    [ 1766.966] (==) Automatically adding devices
    [ 1766.966] (==) Automatically enabling devices
    [ 1766.966] (==) Automatically adding GPU devices
    [ 1766.966] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1766.967] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 1766.967] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1766.967] (WW) Disabling Mouse0
    [ 1766.967] (WW) Disabling Keyboard0
    [ 1766.967] (II) Loader magic: 0x7fec20
    [ 1766.967] (II) Module ABI versions:
    [ 1766.967] X.Org ANSI C Emulation: 0.4
    [ 1766.967] X.Org Video Driver: 14.1
    [ 1766.967] X.Org XInput driver : 19.1
    [ 1766.967] X.Org Server Extension : 7.0
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1767.169] (--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xc6000000/16777216, 0xc8000000/134217728, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/524288
    [ 1767.169] (--) PCI: (0:34:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
    [ 1767.169] Initializing built-in extension Generic Event Extension
    [ 1767.170] Initializing built-in extension SHAPE
    [ 1767.170] Initializing built-in extension MIT-SHM
    [ 1767.170] Initializing built-in extension XInputExtension
    [ 1767.171] Initializing built-in extension XTEST
    [ 1767.171] Initializing built-in extension BIG-REQUESTS
    [ 1767.172] Initializing built-in extension SYNC
    [ 1767.172] Initializing built-in extension XKEYBOARD
    [ 1767.172] Initializing built-in extension XC-MISC
    [ 1767.173] Initializing built-in extension SECURITY
    [ 1767.173] Initializing built-in extension XINERAMA
    [ 1767.174] Initializing built-in extension XFIXES
    [ 1767.174] Initializing built-in extension RENDER
    [ 1767.174] Initializing built-in extension RANDR
    [ 1767.175] Initializing built-in extension COMPOSITE
    [ 1767.175] Initializing built-in extension DAMAGE
    [ 1767.175] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1767.176] Initializing built-in extension DOUBLE-BUFFER
    [ 1767.176] Initializing built-in extension RECORD
    [ 1767.176] Initializing built-in extension DPMS
    [ 1767.177] Initializing built-in extension X-Resource
    [ 1767.177] Initializing built-in extension XVideo
    [ 1767.177] Initializing built-in extension XVideo-MotionCompensation
    [ 1767.178] Initializing built-in extension XFree86-VidModeExtension
    [ 1767.178] Initializing built-in extension XFree86-DGA
    [ 1767.178] Initializing built-in extension XFree86-DRI
    [ 1767.179] Initializing built-in extension DRI2
    [ 1767.179] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 1767.179] (II) LoadModule: "glx"
    [ 1767.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1767.179] (II) Module glx: vendor="X.Org Foundation"
    [ 1767.179] compiled for 1.14.5, module version = 1.0.0
    [ 1767.179] ABI class: X.Org Server Extension, version 7.0
    [ 1767.179] (==) AIGLX enabled
    [ 1767.180] Loading extension GLX
    [ 1767.180] (II) LoadModule: "nouveau"
    [ 1767.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 1767.180] (II) Module nouveau: vendor="X.Org Foundation"
    [ 1767.180] compiled for 1.14.4, module version = 1.0.10
    [ 1767.180] Module class: X.Org Video Driver
    [ 1767.180] ABI class: X.Org Video Driver, version 14.1
    [ 1767.180] (II) NOUVEAU driver
    [ 1767.180] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 1767.180] RIVA TNT (NV04)
    [ 1767.180] RIVA TNT2 (NV05)
    [ 1767.180] GeForce 256 (NV10)
    [ 1767.180] GeForce 2 (NV11, NV15)
    [ 1767.180] GeForce 4MX (NV17, NV18)
    [ 1767.180] GeForce 3 (NV20)
    [ 1767.180] GeForce 4Ti (NV25, NV28)
    [ 1767.180] GeForce FX (NV3x)
    [ 1767.180] GeForce 6 (NV4x)
    [ 1767.180] GeForce 7 (G7x)
    [ 1767.180] GeForce 8 (G8x)
    [ 1767.180] GeForce GTX 200 (NVA0)
    [ 1767.180] GeForce GTX 400 (NVC0)
    [ 1767.180] (--) using VT number 3
    [ 1767.182] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) Loading sub module "dri2"
    [ 1767.183] (II) LoadModule: "dri2"
    [ 1767.183] (II) Module "dri2" already built-in
    [ 1767.183] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
    [ 1767.183] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 1767.183] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 1767.183] (==) NOUVEAU(0): RGB weight 888
    [ 1767.183] (==) NOUVEAU(0): Default visual is TrueColor
    [ 1767.183] (==) NOUVEAU(0): Using HW cursor
    [ 1767.183] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 1767.183] (==) NOUVEAU(0): Page flipping enabled
    [ 1767.183] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 1767.222] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
    [ 1767.230] (II) NOUVEAU(0): Output DP-1 has no monitor section
    [ 1767.265] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Manufacturer: DEL Model: a09b Serial#: 827608652
    [ 1767.265] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.265] (II) NOUVEAU(0): EDID Version: 1.3
    [ 1767.265] (II) NOUVEAU(0): Digital Display Input
    [ 1767.265] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.265] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.265] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 1767.265] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1767.265] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.265] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.265] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.265] (II) NOUVEAU(0): Supported established timings:
    [ 1767.265] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.265] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.265] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.265] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.265] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.265] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.265] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.265] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.265] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.265] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.265] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.265] (II) NOUVEAU(0): Serial No: 36WJX3A91TNL
    [ 1767.265] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.265] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.265] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.265] (II) NOUVEAU(0): 00ffffffffffff0010ac9ba04c4e5431
    [ 1767.265] (II) NOUVEAU(0): 2917010380351e78eaa0a5a656529d27
    [ 1767.265] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.265] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.265] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.265] (II) NOUVEAU(0): 4a5833413931544e4c0a000000fc0044
    [ 1767.265] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.265] (II) NOUVEAU(0): 00384c1e5311000a20202020202000c2
    [ 1767.265] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): EDID for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Manufacturer: DEL Model: a09a Serial#: 844123724
    [ 1767.273] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.273] (II) NOUVEAU(0): EDID Version: 1.4
    [ 1767.273] (II) NOUVEAU(0): Digital Display Input
    [ 1767.273] (II) NOUVEAU(0): 8 bits per channel
    [ 1767.273] (II) NOUVEAU(0): Digital interface is DisplayPort
    [ 1767.273] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.273] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.273] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 1767.273] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.273] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.273] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
    [ 1767.273] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.273] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.273] (II) NOUVEAU(0): Supported established timings:
    [ 1767.273] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.273] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.273] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.273] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.273] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.273] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.273] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.273] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.273] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.273] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.273] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.273] (II) NOUVEAU(0): Serial No: 36WJX3A92PNL
    [ 1767.273] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.273] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.273] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.273] (II) NOUVEAU(0): 00ffffffffffff0010ac9aa04c4e5032
    [ 1767.273] (II) NOUVEAU(0): 29170104a5351e783aa0a5a656529d27
    [ 1767.273] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.273] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.273] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.273] (II) NOUVEAU(0): 4a5833413932504e4c0a000000fc0044
    [ 1767.273] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.273] (II) NOUVEAU(0): 00384c1e5311000a2020202020200053
    [ 1767.273] (II) NOUVEAU(0): Printing probed modes for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 connected
    [ 1767.273] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.274] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.274] (**) NOUVEAU(0): Mode "1600x900": 119.0 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.274] (==) NOUVEAU(0): DPI set to (96, 96)
    [ 1767.274] (II) Loading sub module "fb"
    [ 1767.274] (II) LoadModule: "fb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.274] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "exa"
    [ 1767.274] (II) LoadModule: "exa"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.274] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 2.6.0
    [ 1767.274] ABI class: X.Org Video Driver, version 14.1
    [ 1767.274] (II) Loading sub module "shadowfb"
    [ 1767.274] (II) LoadModule: "shadowfb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.274] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "dri2"
    [ 1767.274] (II) LoadModule: "dri2"
    [ 1767.274] (II) Module "dri2" already built-in
    [ 1767.274] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
    [ 1767.275] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
    [ 1767.275] (==) NOUVEAU(G0): RGB weight 888
    [ 1767.275] (==) NOUVEAU(G0): Default visual is TrueColor
    [ 1767.275] (==) NOUVEAU(G0): Using HW cursor
    [ 1767.275] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
    [ 1767.275] (==) NOUVEAU(G0): Page flipping enabled
    [ 1767.275] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
    [ 1767.308] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
    [ 1767.316] (II) NOUVEAU(G0): Output DP-1-2 has no monitor section
    [ 1767.339] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
    [ 1767.347] (II) NOUVEAU(G0): EDID for output DP-1-2
    [ 1767.347] (II) NOUVEAU(G0): Manufacturer: DEL Model: a09a Serial#: 844124236
    [ 1767.347] (II) NOUVEAU(G0): Year: 2013 Week: 41
    [ 1767.347] (II) NOUVEAU(G0): EDID Version: 1.4
    [ 1767.347] (II) NOUVEAU(G0): Digital Display Input
    [ 1767.347] (II) NOUVEAU(G0): 8 bits per channel
    [ 1767.347] (II) NOUVEAU(G0): Digital interface is DisplayPort
    [ 1767.347] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.347] (II) NOUVEAU(G0): Gamma: 2.20
    [ 1767.347] (II) NOUVEAU(G0): DPMS capabilities: Off
    [ 1767.347] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.347] (II) NOUVEAU(G0): First detailed timing is preferred mode
    [ 1767.347] (II) NOUVEAU(G0): Preferred mode is native pixel format and refresh rate
    [ 1767.347] (II) NOUVEAU(G0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.347] (II) NOUVEAU(G0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.347] (II) NOUVEAU(G0): Supported established timings:
    [ 1767.347] (II) NOUVEAU(G0): 720x400@70Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1280x1024@75Hz
    [ 1767.348] (II) NOUVEAU(G0): Manufacturer's mask: 0
    [ 1767.348] (II) NOUVEAU(G0): Supported standard timings:
    [ 1767.348] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.348] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.348] (II) NOUVEAU(G0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.348] (II) NOUVEAU(G0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.348] (II) NOUVEAU(G0): Supported detailed timing:
    [ 1767.348] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.348] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.348] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.348] (II) NOUVEAU(G0): Serial No: 36WJX3A92PPL
    [ 1767.348] (II) NOUVEAU(G0): Monitor name: DELL P2414H
    [ 1767.348] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.348] (II) NOUVEAU(G0): EDID (in hex):
    [ 1767.348] (II) NOUVEAU(G0): 00ffffffffffff0010ac9aa04c505032
    [ 1767.348] (II) NOUVEAU(G0): 29170104a5351e783aa0a5a656529d27
    [ 1767.348] (II) NOUVEAU(G0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.348] (II) NOUVEAU(G0): 010101010101023a801871382d40582c
    [ 1767.348] (II) NOUVEAU(G0): 45000f292100001e000000ff00333657
    [ 1767.348] (II) NOUVEAU(G0): 4a583341393250504c0a000000fc0044
    [ 1767.348] (II) NOUVEAU(G0): 454c4c205032343134480a20000000fd
    [ 1767.348] (II) NOUVEAU(G0): 00384c1e5311000a202020202020004f
    [ 1767.348] (II) NOUVEAU(G0): Printing probed modes for output DP-1-2
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.348] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
    [ 1767.348] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
    [ 1767.348] (==) NOUVEAU(G0): DPI set to (96, 96)
    [ 1767.348] (II) Loading sub module "fb"
    [ 1767.348] (II) LoadModule: "fb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.348] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (II) Loading sub module "exa"
    [ 1767.348] (II) LoadModule: "exa"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.348] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 2.6.0
    [ 1767.348] ABI class: X.Org Video Driver, version 14.1
    [ 1767.348] (II) Loading sub module "shadowfb"
    [ 1767.348] (II) LoadModule: "shadowfb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.348] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (--) Depth 24 pixmap format is 32 bpp
    [ 1767.351] (II) NOUVEAU(G0): Opened GPU channel 0
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] Setup complete
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
    [ 1767.360] (II) EXA(256): Driver allocated offscreen pixmaps
    [ 1767.360] (II) EXA(256): Driver registered support for the following operations:
    [ 1767.360] (II) Solid
    [ 1767.360] (II) Copy
    [ 1767.360] (II) Composite (RENDER acceleration)
    [ 1767.360] (II) UploadToScreen
    [ 1767.360] (II) DownloadFromScreen
    [ 1767.360] (==) NOUVEAU(G0): Backing store disabled
    [ 1767.360] (==) NOUVEAU(G0): Silken mouse enabled
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Extension initialized.
    [ 1767.360] (==) NOUVEAU(G0): DPMS enabled
    [ 1767.360] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DVI-I-1" is not used
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DP-1" is not used
    [ 1767.362] (II) NOUVEAU(0): Opened GPU channel 0
    [ 1767.366] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 1767.366] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 1767.366] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 1767.366] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 1767.366] (II) EXA(0): Driver registered support for the following operations:
    [ 1767.366] (II) Solid
    [ 1767.366] (II) Copy
    [ 1767.366] (II) Composite (RENDER acceleration)
    [ 1767.366] (II) UploadToScreen
    [ 1767.366] (II) DownloadFromScreen
    [ 1767.366] (==) NOUVEAU(0): Backing store disabled
    [ 1767.366] (==) NOUVEAU(0): Silken mouse enabled
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 1767.366] (==) NOUVEAU(0): DPMS enabled
    [ 1767.366] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.366] (--) RandR disabled
    [ 1767.388] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 1767.388] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 1767.388] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 1767.388] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 1767.388] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 1767.389] (II) AIGLX: Loaded and initialized nouveau
    [ 1767.389] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 1767.390] (II) NOUVEAU(G0): NVEnterVT is called.
    [ 1767.393] (II) NOUVEAU(0): NVEnterVT is called.
    [ 1767.444] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
    [ 1767.444] resize called 1920 1080
    [ 1767.479] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1767.479] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.479] (II) LoadModule: "evdev"
    [ 1767.479] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1767.479] (II) Module evdev: vendor="X.Org Foundation"
    [ 1767.479] compiled for 1.14.3, module version = 2.8.2
    [ 1767.479] Module class: X.Org XInput Driver
    [ 1767.479] ABI class: X.Org XInput driver, version 19.1
    [ 1767.479] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.479] (**) Power Button: always reports core events
    [ 1767.479] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1767.479] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.479] (--) evdev: Power Button: Found keys
    [ 1767.479] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 1767.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1767.479] (**) Option "xkb_rules" "evdev"
    [ 1767.479] (**) Option "xkb_model" "pc104"
    [ 1767.479] (**) Option "xkb_layout" "us"
    [ 1767.499] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 1767.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.499] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.500] (**) Power Button: always reports core events
    [ 1767.500] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 1767.500] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.500] (--) evdev: Power Button: Found keys
    [ 1767.500] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
    [ 1767.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 1767.500] (**) Option "xkb_rules" "evdev"
    [ 1767.500] (**) Option "xkb_model" "pc104"
    [ 1767.500] (**) Option "xkb_layout" "us"
    [ 1767.500] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
    [ 1767.502] (II) No input driver specified, ignoring this device.
    [ 1767.502] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event4)
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard'
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: always reports core events
    [ 1767.502] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event4"
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Found keys
    [ 1767.502] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard
    [ 1767.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input5/event4"
    [ 1767.502] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
    [ 1767.502] (**) Option "xkb_rules" "evdev"
    [ 1767.502] (**) Option "xkb_model" "pc104"
    [ 1767.502] (**) Option "xkb_layout" "us"
    [ 1767.502] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
    [ 1767.502] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 1767.502] (**) Logitech USB Optical Mouse: always reports core events
    [ 1767.502] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found relative axes
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6/event5"
    [ 1767.503] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
    [ 1767.503] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 1767.503] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.503] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1767.503] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1767.504] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.504] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1767.504] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1767.504] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1767.504] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1767.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1767.504] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 1767.504] (**) Option "xkb_rules" "evdev"
    [ 1767.504] (**) Option "xkb_model" "pc104"
    [ 1767.504] (**) Option "xkb_layout" "us"
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event19)
    [ 1767.505] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.505] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 1767.505] (**) PS/2 Generic Mouse: always reports core events
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event19"
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found relative axes
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event19"
    [ 1767.505] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1767.505] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1774.230] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 1774.230] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 1774.230] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1779.499] (II) evdev: PS/2 Generic Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Logitech USB Optical Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: DELL Dell USB Entry Keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1780.500] Error dropping master: -22(Invalid argument)
    [ 1780.501] (II) NOUVEAU(G0): Closed GPU channel 0
    [ 1780.503] (II) NOUVEAU(0): Closed GPU channel 0
    [ 1780.503] (EE) Server terminated successfully (0). Closing log file.
    Thanks for any help!

    I have  a similar issue except with two ATI cards and four monitors.
    I have a working xorg.conf that uses Xinerama and all 4 work but have been trying to get xrandr to work since xinerama is deprecated supposedly.
    I would like to switch to xrandr but there is some kind of magic voodoo I have with my current xorg.conf that doesn't even work on an exact same machine and cards that I tried to setup for a co-worker.
    lspci:
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    My xorg.conf:
    Section "Device"
    Identifier "ATI0"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI1"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-1"
    Screen 1
    EndSection
    Section "Device"
    Identifier "ATI2"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-2"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI3"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-3"
    Screen 1
    EndSection
    Section "Monitor"
    Identifier "DVI-0"
    Option "Primary" "On"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-1"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-2"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-3"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "ATI0"
    Monitor "DVI-0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "ATI1"
    Monitor "DVI-1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "ATI2"
    Monitor "DVI-2"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen3"
    Device "ATI3"
    Monitor "DVI-3"
    DefaultDepth 24
    Subsection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen "Screen0" 0 0
    Screen "Screen1" RightOf "Screen0"
    Screen "Screen2" Above "Screen1"
    Screen "Screen3" Above "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    My Xorg.0.log shows all the DVI connections when I don't use a xorg.conf file but only two are "connected"
    I see DVI-0 and DVI-1 connected and in "xrandr -q" but in Xorg.0.log I see DVI-1-2 and DVI-1-3.
    xrandr --listproviders show the two cards as well.
    Tried "xrandr --setprovideroutputsource 1 0" and they show up in KDE but as clones and then X crashes eventually.
    "xrandr --setprovideroutputsource 0 1" just plain crashes X

  • BW 3.5 - Issue with formula variable with replacement path

    Dear experts,
    I'm facing an issue with formula variable with replacement path.
    Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
    I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100 €
    To do so I've setup a calculated key figure as follow:
    VAR1 * ("PO value" < 100 ) * "PO value"
    VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
    (The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
    The report as characteristic "plant" in rows and my CKF in columns.
    Now let's take an example. I have 3 POs in Plant 1:
    PO1 -> 150€
    PO2 -> 90€
    PO3 -> 80€
    Because of the variable with replacement path, the result in my query should be:
    plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
    But the result coming is 320, which is wrong.
    I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
    They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
    Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref  characteristic 'constant =1' ...
    Any though is welcome!
    thanks

    Hi,
    The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
    To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
    Regards,
    Patricia

  • Issue with Analysis Office Add in

    Hi,
    User are having an issue with Analysis Office and giving the error.
    From Analysis Office-> Open workbook->after Login to AO using BW connection
    After opened the report ->when refresh the report, getting the error
    "An Exception occurred in one of the data sources. SAP BI Add in has disconnected
    Nested Exception. See inner exception below for more details
    Initial RANGE-LOW for customer exit variable ****_EXIT_001 corrected ..
    Under details
    An exception has occurred in one of the data sources.
    SAP BI Add-in has disconnected all data sources.(ID-111007)
    We are using BO AO for MS Office Add-in 1.4 SP3 in BO server.
    Please let me know the reason for this error and how to fix this.
    Thanks in advance.
    Jayakrishna

    Hi Krishna,
               Thanks for the reply.  The Sales office field is directly mapped  in the transformation and does not have any routine. Its the Key field.
    The Billing Document Condition infocube is being feed by the DSO '2LIS_13_VDKON - Billing Document Condn' and datasource is '2LIS_13_VDKON'.
    The Open Orders infocube is being feed by the DSO Document Order item / Delivery;  below which we have another 3 DSO.
    1st DSO has the Datasource '2LIS_13_VDITM'
    2nd DSO has the Datasource '2LIS_11_VAITM'
    3rd DSO has the Datasource '2LIS_11_V_SSL'
    The Sales Office 7 has txn records for the month of April & May.
    The report built on top of a Multiprovider and the for the months June and July, we have txn records fine for the sales office 01 - 06.
    Please help me, if i am missing anything here and make me to understand better.

  • BW hierarchies issue with BOBJ Reporting tools

    Hi All,
    Brief about the requirement:
    Our client was using Mainframe and other tools for their reporting. Now as they have planned to go for SAP, purchased SAP BW 7 and SAP BOBJ XI 3.1 for warehouse and reporting purposes.
    Initial Road map planned for implementation was
    o     to use Crystal for operational and formatted reporting
    o     to use WebI for Ad hoc and interactive reporting
    o     to use Xcelsius for Dashboards
    Once we started analysing the requirements, we observed that client requires hierarchies extensively for reporting and they donu2019t want to compromise in that for reporting. At this situation we have explored the options and came to know from the SAP sites that BO got limitations in case of BW hierarchies. But we not able to articulate the what is the exact issue. Is it with only WebI or Crystal also?
    What we have articulated is we cannot report the hierarchies in BO in terms of nodes - > Sub nodes -> sub nodes instead we can do as fixed columns. Please add me if i am missing anything else.
    And also please let us know options. Options that we were thinking are Implement with BO XI 3.1 considering Advanced analysis tool then upgrade to BO XI 4.1.
    Please suggest us, what is the BW & BO hierarchy issue and right tools to use.
    Thanks & Regards,
    Bala

    Our client uses XI 3.2 but is experiencing issues with Hierarchical BEX queries returning blanks - the mdx is fine - just webi that seems to have a problem and I'm also trying to determine in exactly which instances this occurs.
    XI 4.x supposedly resolves mots issues but here again details are not known.
    I.e. hopefully someone can point to an info source that describes in more detail what issues are likely to occur re hierarchies and webi.

Maybe you are looking for