Issue with adding P/N

Hi
I'm trying to add P/N but i get the below massage:
Item code 'itm000121' already exists Message 3504-19
This P/N is not exists, when i try to find it i get the below massage
No matching records found 'Items' (OITM) (ODBC -2028) Message 131-183
What can i do to add this P/N again?
In the past i delete P/N that i didn't need them, maybe one of them was this P/N that i try to add.
Thanks

I just delete the row of this item from the tables AITM, AIT1, AITW, OITM, ITM1. and finally i succeed to insert this item again.
Now i know to avoid from using delete query.
Thank you all
Just one more question:
If i delete Item from the Item Master Data window (Item with no transection) - right click then delete. this option will delete this recode from all the relevant table?

Similar Messages

Facing issue with adding systems in SMSY - solution manager

Hi all,
 We are facing an issue with the solution manager in tcode smsy. When i create a system in the corresponding component say ECC with product version ECC6.0.The next screen shows that the <SID> has been added successfully. But when i navigate to the path and i unable to see the system SID which i have created.
 Again i have tried to create the same system with same SID, but it shows that " SID already exists "
 Also i need another suggestion, we have planned to add 60 systems in the same solution manager. Kindly suggest me , how many systems we can add in single solution manager in maximum and for configuring EWA ?
Thanks
Raj

Hi Raj,
You can delete the old system entry and then try creating the saem again..
Also while creating mention correct product and version and the installation number.
You can also use the assistant for this.
Have you added all your servers and DB?
regards,
Raja. G
Edited by: Raja Gunasekaran on Aug 28, 2009 1:26 PM

Any issues with adding this card to my mac?

I would like to add a card to my mac pro that will enable me to capture video from certain types of HD video cameras.
1. Do I have a slot available to put in one of these cards?
2. Are there any potential issues with doing this?
3. I am guessing that by adding the card, it will create an open port on the back of the mac that will allow me to connect the camera.
http://www.blackmagic-design.com/products/intensity/
I have the Dual-Core Intel XeonProcessor Speed: 3 GHz.
Thanks!!!!

The Intensity HDMI card is normally used to capture UNCOMPRESSED video from an HD vidcam.
Lets say, for example you get a Canon HV20 camera - it has both firewire and HDMI outs. The camera, being HDV, uses HDV compression to write to tape. So once video is on tape, you will be capturing HDV encoded video (just fine with FCP). The HDV standards dictate 1420x1080 even though the sensor of the HV20 is a native 1920x1080. But, since non-square pixels are used, consider it 1920x1080 aspect.
If you hook the HV20 to your Mac Pro using HDMI and the Intensity card, you can capture uncompressed, native 1920x1080 video. However, you better have enormous and extremely fast Raid storage, as it requires sustained data rates roughly, what, 100 times greater than HDV? And you better have a really long extension cord if you plan to use it in the field, as, you must remember, once written to tape it will be compressed HDV video, so the small gain you'll get from native uncompressed 1920x1080 video is only available at the time you shoot, and only out of the HDMI port.
HDV looks stunning as is, so unless you are a professional with special requirements (in which case I've not told you anything you don't already know), you may want to rethink this.
If you shoot well exposed HDV video, and edit with FCP or iMovie HD for that matter, and play back from tape to a 1920x1080i HDTV, it is as good as watching the Discovery Channel HD.
Good luck,
John F

Issues with adding a line....

Can someone PLEASE give me some course of action to take here. I feel extremely frustrated and upset with Verizon, and none of the reps seem to want to be of any assistance at all……
Recently, my wife and I decided that it was time to consolidate our phones to one carrier. She previously had AT&T, and I have had Verizon for 11+ years. After calling and talking to SEVERAL Verizon reps, and insuring that my current features and promos would NOT change if I added my wife’s phone to my account, we went ahead and ported her line to Verizon. This is where all the issues begin.
To begin with, I called and talked to two different Verizon reps, who assured me that if I were to change my plan to a family share plan, I would CONTINUE receiving all discounts and promotions that I was already receiving on my primary line. They did note that some of these discounts would not be available to my “new” line, which was understandable, but again I was assured that I wouldn’t lose ANY promotions. The promotions that I am referring to are as follows:
18% Access Discount
Unlimited Email & Web
5 Friends and Family
Talk & Text Plus Data $20 Disc
Within the first week of adding my wife’s phone to my account, I noticed that I had indeed lost the “Talk & Text Plus Data $20 Disc”. I immediately called Verizon and inquired about why this promotion was lost, and I got several different arguments and rebuttals from the Verizon reps. The responses spanned the gamut of “There was never a $20 Disc on your account” to “That discount was only valid for 1 year upon enrolling”. I referred all the reps to the notes on my account that were written by the previous reps who assured me that this specific promo would remain. I also went as far as reading them the information I have on the promo stating that as long as I remain in a qualified plan, the $20 promo would remain for life. I was then told there was nothing they could do, and was transferred to “Loyalty”.
Once transferred to “Loyalty” I talked to a very nice rep, who pulled up the information on the discount and assured me AGAIN that I was eligible for this promotion and she put in what is called an “Inactive Pricing Request” form to have the promotion reinstated on my account. She also assured me that in the event that the promotion was not immediately applied to my account, she would set my account up for review when the new bill came out, and she would personally issue me the $20 credit.
To make a long story short, my new bill came, and there was no new credit. I called Verizon back, and asked to speak to “Loyalty”, and the rep gave me some run around about not being able to send me directly to loyalty without him attempting to help me first. Finally after a 10 – 15 minute conversation he transferred me to Loyalty. This time, the Loyalty rep told me that I was NOT eligible for the promotion. I had her review all the notes on my account from the previous rep, and she verified that red assured me I was eligible, had put in the inactive pricing request, and assured me she would give me the $20 credit if the promotion wasn’t added. The rep then told me that the other rep had bold-faced lied to me and she would be filing a complaint with her supervisor. I requested to speak to her supervisor.
Her supervisor got on the line and stated that she was aware of the situation, there was nothing that they could do, and that the other reps that assured me I was still eligible for the promotion would get complaints filed through their supervisors for inaccuracy. I asked this rep to EMAIL the last Loyalty rep that assisted me and have her call me. She obliged, and within 15 minutes I was back on the phone with the ORIGINAL Loyalty rep.
The ORIGINAL Loyalty rep reviewed all the new comments on my account, and AGAIN assured me that I was STILL ELIGIBLE for the promotion, and she was going to “escalate” the inactive pricing request. She also told me that she had discussed my situation with her supervisor, and after reading the promotion details he too agreed that I was eligible for the promo. She assured me that I would hear back from them regarding the status of the promotion being added back to my account before my bill due date.
Upon reviewing my bill I noticed that it was extremely high. Upon calling Verizon AGAIN, it was disclosed to me that since my wife’s number was ported into Verizon from AT&T, and they gave her a temporary number to use until the number was ported over, I was being billed TWO $35 line activation fees. One for her actual ported line, and the other for the “temporary number” that was only in existence for 1 hour, and never even used. Needless to say upon review, that $35 was credited back to me.
My dilemma now is what do I do? Even though several Verizon reps assured me that my discounts would remain, at least one of them didn’t. Since I have spent so much time fighting with Verizon reps on the phone, and awaiting my new bill, we are past the time to be able to cancel my wife’s line and revert everything back to the way it was. The benefit of this promotion was that I received a $20/mo discount through the life of my contract, with no end date. I have yet to hear back from the ORIGINAL Verizon Loyalty rep even though I have had her emailed again to contact me, and all the other Reps claim there is nothing that can be done, and I should’ve taken measures prior to upgrading to ensure my promotions would remain.

spottedcatfish wrote:
If you want consistent answers, always ask for official written documentation. For instance, you can read the Terms & Conditions of service on this website, and you should also recieve a copy when you sign a contract in store. Verizon has too many employees to be able to train them all perfectly, and then you can add in the inconsistency from all the different distribution channels (premium retailers, third party retailers like Amazon and Best Buy, etc.). Should they strive for it? Absolutely. Will that help you as a customer when you get a dumb or new rep? Nope. So help yourself, get your information in writing or don't believe what you hear.
While in theory this is a great idea, the problem lies with Verizon once again. When talking to the Verizon reps who tell me my account doesn't qualify, and they are able to "quote" to me the reasons from the promotional documentation, when I request they send me written proof of why I don't qualify, I get the reply "We can't release internal Verizon documents to the public." I quote them what the documentation I have states, and they claim their documentation is different, yet they aren't allowed to release any documentation proving my account is in fact ineligible.
Also, when requesting documentation as to why the "inactive pricing request" was denied, the response I get is that my account is not eligible. I ask for documentation and get the reply that the "inactive pricing requests" are done by a third party that is not affiliated with Verizon, and they can't release those documents to me either.
It seems a little odd to me that they have all this documentation that conflicts with all the information I have, yet they can't provide me proof of anything that is being said. The problem is they want you to think you are wrong. They want you to second guess yourself and hope you give up. It is much easier to tell a customer "No", rather then take the time to fix the issues at hand.

Access 2010, Sharepoint 2010 issue with adding field to access db table

I needed to add an additional field to one of my access tables contained in the sharepoint list.
My application is a front end Access DB (run locally), and the backend is the 'data' database contained in the sharepoint lists.
I added the field to the database (called BOM). When I open the access list (from sharepoint) , and also look at the database in access, the field is there and things are fine.
However, it does not show up in my linked front end. I deleted the linked sharepoint tables from my front end, and then re-imported. Now I see the BOM field I created, but it has replaced the 'ID' field, which was the primary key. I had
added the 'BOM' field as the last field in the table. Now it is the first field, having replaced the 'ID' field.
What's going on here?
Thanks in advance!

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, and the issue more related to Sharepoint 2010, I'll move your question to the Sharepoint 2010 forum
http://social.technet.microsoft.com/Forums/sharepoint/en-US/home?forum=sharepointgeneralprevious
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

Issue with adding new fonts in Lion

I'm trying install two new fonts on my Mac Book Air and cannot get it to allow me to add them to the Font Book. (I've just successfully added the same fonts on to my Mac Book Pro which runs Snow Leopard, so this is definitely a Lion issue.)
I've created a new font library and then tried adding the fonts to it but it refuses to validate the font saying that '1 serious error was found. Do not use.' Any ideas of how to remedy this as I urgently need to use the font?
Many thanks.

Derp Derp Derp?? TestDerp Then Derpy Derp Derp

Issue With Adding Layers - Please Help!

I am having an issue where Photoshop is not allowing me to add any kind of new layer to images that I'm editing. It won't allow it while it's a .NEF or after it's become a .PSD. If I open an image that already contains layers and is saved as a .PSD, then it allows me to add layers no problem. If I start a new blank document it will allow me to add layers. It's just not allowing me to do it with files that have been imported within the last week. It doesn't seem like a system resource issue since it allows me to add layers to older files. If you have any thoughts on this please help!
I am running:
Adobe Photoshop Elements Language Version: 8.0.0 (8.0 (20090905.r.605812))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:6, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 2
Processor speed: 2100 MHz
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD M880G with ATI Mobility Radeon HD 4200
OpenGL Drawing: Disabled.
Video Card: AMD M880G with ATI Mobility Radeon HD 4200
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Driver: atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version: 8.632.0.0
Built-in memory: 3838 MB
Free memory: 1801 MB
Memory available to Photoshop: 1619 MB
Memory used by Photoshop: 60 %
Image cache levels: 4
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 453.9G, 64.8G free
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 8.0\Plug-Ins\
Additional Plug-ins folder: not set
-Tony

Well... sort of fixed it. Apparently my system doesn't like editing images with a color depth of 16bit. If I convert it down to 8 when I'm converting it from RAW, then it allows me to add layers... Is this normal?
Thank you for your time,
-Tony

Issue with adding Long charater field in custom table

I have added a URL ( Internet address ) field ZZSSOURIADDR with data element AD_URI whose domain is long character and length 2048.On activation table gives an message in a log
Field ZZSSOURIADDR does not have a preceding length field of type INT4.
What needs to be done to remove this error?

As specified in SAP documentation, this must be the last field, and the previous one must be the actual length field type INT2. (suggestion: use data element AD_URILNG)
LCHR: Character string of any length, but has to be declared with a minimum of 256 characters. Fields of this type must be located at the end of transparent tables (in each table there can be only one such field) and must be preceded by a length field of type INT2. If there is an INSERT or UPDATE in ABAP programs, this length field must be filled with the length actually required. If the length field is not filled correctly, this may lead to a data loss in the LCHR field! A fields of this type cannot be used in the WHERE condition of a SELECT statement.
If error message wasn't clear enough, then try a where-used in transparent table of the data element AD_URI.
NB: You could also use in your development the central address, actual URL would be stored in ADR12 and only ADRNR is in your custom database table, more development (look for BAPI BUPA) but smaller database.
Regards,
Raymond

Anyone having issues with adding tabs in finder?

I upgraded from ML to Mavericks on my MBP r 2012, which was quite smooth, Finder does have tags...and works well, but I could not find how to add 'tabs'.
There was no + sign anywhere and I could not add any tool for doing that from trying to customize the tools bar. Anyone facing similar issues?

Once you've added a tab, either by double-clicking a folder in Finder or by command-T, a + icon appears at the right of the open tabs..

Issue with adding songs to library.

Hey, I am having problems putting songs into my library. I've tried Adding the files and folders seperatly, but nothing shows up in the library. All of the songs are MP3's and seem to play fine in WMP...Anyone else have this problem?

i also have the same problem.
basically, what i did, is i went to Add folder to library, and chose My Music. So it loaded all the songs, and shows in the bottom that i have 4780 songs. But when i do the same in Winamp, it shows 6806 songs. So i checked the Library in iTunes and saw that some songs were missing, in what seems like a random manner. For example, i have the album "The Art of Drowning" from AFI, but only 2 songs from them are showing in the iTunes library, yet i have no problem playing them in Winamp, or even Windows Media Player. I tried adding a couple files manually, but it still doesn't work.
(those are songs from CD's i own personnally)
Please help,
Thanks.
edit: i found something out in this thread: http://discussions.apple.com/thread.jspa?messageID=2260889&#2260889
i tried removing both ID tags from a certain song and then iTunes accepted it. There is no way i can do this manually on the ~2500 songs that iTunes is not playing. I will try the program mentionned (TidyMP3) and come back with results.

Issue with adding a new value to the Default Login Page

Hopefully this is an easy one guys, I've added a select list item to the standard login page (P101) to allow the user to select a DOMAIN as well as entering their username and password.
When the next page is displayed and I try to retrieve the value held in the new field it has been cleared, but the values entered into items
P101_USERNAME and P101_PASSWORD are still present.
I can't figure out why the values held in items P101_USERNAME and P101_PASSWORD are still present but P101_DOMAIN has been cleared.
I've tried creating a value on page zero and writing the domain value to it using pl/sql and javascript but as soon as the next page is requested the value is cleared.
Any Ideas how to get around this????
Thanks in advance

I suppose your login page contains a process like this:
BEGIN
   wwv_flow_custom_auth_std.login (p_uname           => v ('P101_USERNAME'),
                                   p_password        => :p101_password,
                                   p_session_id      => v ('APP_SESSION'),
                                   p_flow_page       => :app_id || ':1'
   :t_random_number := :p101_random_number; /* this is something I added to my code */
END;Now, if you go to this page:
http://apex.oracle.com/pls/otn/f?p=31517:1
please note the random number assigned to you. Once you login, the same number will appear on the page 1 (near to the top).
So, that is how you could solve your problem.
   :t_random_numberis an application item.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Query Issue with adding a static value

I have written a query in SAP that works the way I need it to. I am going to schedule it so that SAP does a file transfer of the output to another area where the data will be accumulated.
My problem is that I want the name of the system to appear at the end of each line but it is not in any table I can find to match up with the userid.
EX:
UserID Group System
JDOE HR Query Group P201
The field for system is not in any tables but I want to add it and give it a constant/static value all the time in the output.
Any ideas?
Thanks!
Justin Dauby -- SAP Security Analyst
Kimball International Inc.,

The name of the system is not in a table, but rather a structure called SYST. You can evaluate it using the system field sy-sysid.
Another option is to call function module RFC_SYSTEM_INFO. The export parameter RFCSI_EXPORT will deliver the system id from component RFCSYSID of the structure RFCSI.
Cheers,
Julius

Issue with adding a new HD for MacPro G5

I currently have a MacPro G% that is connected to a network. I have tried to install a seagate barracuda 1TB HD as a storage drive. The G5 does not see the drive. DU does not see the drive. Is there a jumper/setting/something that I am missing in the installation other than sliding it into the bay and powering up?

Can you tell if the drives are at least spinning, so you know that at least they're getting power?
As a test, you could want to try the bay currently occupied by the boot drive. You know that bay is working, so if the new drive doesn't work there either - you'll have to boot the system from the Mac OS X installer disk, of course - then it would have to be something with the drives you're using, as unlikely as that sounds.
That's all I can think of. Perhaps someone else here (Hatter, for instance) will be able to offer additional suggestions.
Message was edited by: Dave Sawyer

ERecruiting: Issue with adding a new recruiter to userlist for support team

I am trying to add a new recruiter to the user list in Development environment , so that it can be transported to Production. The new user has been created in eRecruting Development box and has RCF_CAND_INT assigned to the id. When I try to add the id in " create user list" in SPRO, Iam getting an error ' no candidate cound be found for that id" (cl_hrrcf_candidate=>get failed
). What step am I missing here. Any help would be greatly appreciated.

Can you tell if the drives are at least spinning, so you know that at least they're getting power?
As a test, you could want to try the bay currently occupied by the boot drive. You know that bay is working, so if the new drive doesn't work there either - you'll have to boot the system from the Mac OS X installer disk, of course - then it would have to be something with the drives you're using, as unlikely as that sounds.
That's all I can think of. Perhaps someone else here (Hatter, for instance) will be able to offer additional suggestions.
Message was edited by: Dave Sawyer

Issue with adding up a Percent and a number

In Crystal Reports XI I have an issue where I'm trying to add a percent and a number together and I don't get the desired result. Formula = (4.6800000 + 2) Formula = (4.6800000 * 2) Formula = IF ((4.6800000 + 2)>(4.6800000 * 2)) then else Formula = IF (6.6800000 >= 5.8500000) and (6.6800000 >= ) then "FAILS" else "PASSES" The value of (4.6800000 + 2) displays 6.6800000 correctly on the report but if you try to say that 6.6800000 = (4.6800000 + 2) then your RESULT value shows "FAILS" on the report. For some reason 6.6800000 does not = (4.6800000 + 2) The Formula RESULT above should say "PASSES" but I get "FAILS" but both values show "6.6800000"I have tried Rounding, Truncating, and Formating decimals and just does not make sense. Any Ideas? Thanks (It works in Access Reports) 

The condition is wrong check
IF (6.6800000 >= 5.8500000) ANDÂ (6.6800000 >
= {@Get }) then "PASSES" else "FAILS"
As you are using AND both the conditions should get satisfied ....
Cheers
Rahul

Issue with adding custom speed to a behavior

I am trying to add a custom speed to a write on behavior. The shape I am trying to write on works fine when I have it at any other speed setting but when I set it to custom (which I need to allow it to both write on and write off at the end) the shape disappears. Despite playing with the custom speed percentage, the shape never comes back. Any ideas?

Ok. I opened your project in my Motion 4 and after it updated it, I got the custom behavior to work fine. However, I had a thought so I decided to open it on my machine that's using Motion 3. There I noticed the problem you're having. I was unable to get the shape write on behavior to work either.
I believe the problem to be with your project. It appears slightly corrupt. Here's something you might try. Create a new project. Redraw your circle shape. Apply the write on behavior and keyframe it as I mentioned before. Then copy and paste it into your current sequence to replace the circle you have in there.
If that doesn't work, I'd rebuild your project. Instead of using all those strokes, just make one X and one O and one line. Then use clones for all the others. That should simplify the project quite a bit.

Issue with adding P/N

Similar Messages

Maybe you are looking for