Issue with addPrincipal() of Interface DocumentAcl
Hi all,
There is an issue with the addPrincipal(String id, String format, int idType) method of interface DocumentAcl which creates/sets readers for a document and validates them on identity management system.
When I use this method for small number of readers say 3-10, readers are properly set for the document. However when I have a thousand users/readers for a single document the method throws OutOfMemory Error and does not add a single user for the document.
I would like to add to above scenario that for a few documents (in my case for 40 documents) readers (all thousand) were properly set. Afterwards for each document I started getting OutOfMemory Error.
Is it an issue with addPrincipal() method?
Need your comments.
I am using SES 10.1.8.
Regards,
Shakti
Hi all,
There is an issue with the addPrincipal(String id, String format, int idType) method of interface DocumentAcl which creates/sets readers for a document and validates them on identity management system.
When I use this method for small number of readers say 3-10, readers are properly set for the document. However when I have a thousand users/readers for a single document the method throws OutOfMemory Error and does not add a single user for the document.
I would like to add to above scenario that for a few documents (in my case for 40 documents) readers (all thousand) were properly set. Afterwards for each document I started getting OutOfMemory Error.
Is it an issue with addPrincipal() method?
Need your comments.
I am using SES 10.1.8.
Regards,
Shakti
Similar Messages
-
Facing an Issue with Payables Open Interface Import
Hi
I am facing an issue with the Payables Open Interface Import...
My Requirement is:
1. Need to upload the PO, Supplier, Invoice #, Invoice Date details to custom table (through web ADi)
2. From custom table storing in the AP invoice interface tables.
3. From Interface table, calling API (Payables Open Interface Import) which wil create the invoive (PO matched)
Now, If user has given wrong data some reasons....Payables Open Interface Import has rejected that entry....user has checked this and corrected later and trying to create the same invoice with the correcte data....As there is a rejected a line exists on the Header interface, line interface...even though if he pass the correct data in the second time it is cosidering that rejected row and not processing the correct row...
Can any one suggest on this...
Regards,
BalaWhen processing a record, you can check if another ap_invoice_interface record exists for the same invoice number and
1) Delete the old record and then insert a new one
OR
2) Update the old record instead of creating a new one
Hope this helps,
Sandeep Gandhi -
Issue with Essbase - SQL Interface in UNIX box
Hi All,
One of our customer is facing an issue while trying to connect to the Oracle datasource from Essbase version 9.0.1.0.00 in a 64 bit UNIX box. He is using Oracle wired protocol for SQL interface.
Customer has tried the below and getting the below error:
1) Ran the nst-sql.sh file.
2) Edited the odbc.ini file and the .profile file with the required dsn information.
3) From the console selected the open SQL option and received the following error " There are no datasources defined. Please create one to continue"
I have attached the odbc.ini file and the .profile file for your reference.
Any help appreciated.
Thanks,
Bharathi Raja
ODBC.ini file
ARBORPATH=/hyper/arbor/Hyperion/AnalyticServices
HYPERION_HOME=/hyper/arbor/Hyperion
ESSLANG=English_UnitedStates.Latin1@Binary
SHLIB_PATH=.:/hyper/arbor/Hyperion/common/ODBC/Merant/5.0/lib:/hyper/arbor/Hyperion/AnalyticServices/bin:$SHLIB_PATH
PATH=$PATH:$ARBORPATH/bin:/usr/lib:$ARBORPATH:$HYPERION_HOME/common/ODBC/Merant/5.0/lib
LD_LIBRARY_PATH=$HYPERION_HOME/common/ODBC/Merant/5.0/lib
ulimit -c unlimited
ulimit -n 1024
LIBPATH=/hyper/arbor/Hyperion/common/ODBC/Merant/5.0/lib
LANG=en_US
ODBCINI=/hyper/arbor/Hyperion/Essbase/bin/.odbc.ini
[ODBC Data Sources]
DB2 Wire Protocol=DataDirect 5.0 DB2 Wire Protocol Driver
dBase=DataDirect 5.0 dBaseFile(*.dbf)
FoxPro3=DataDirect 5.0 dBaseFile(*.dbf)
Informix=DataDirect 5.0 Informix
Informix Wire Protocol=DataDirect 5.0 Informix Wire Protocol
Oracle=DataDirect 5.0 Oracle
Oracle Wire Protocol=DataDirect 5.0 Oracle Wire Protocol
Progress9=DataDirect 5.0 Progress SQL92
Progress10=DataDirect 5.0 Progress OpenEdge
SQLServer Wire Protocol=DataDirect 5.0 SQL Server Wire Protocol
Sybase Wire Protocol=DataDirect 5.0 Sybase Wire Protocol
Text=DataDirect 5.0 TextFile(*.*)
[DB2 Wire Protocol]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARdb220.sl
Description=DataDirect 5.0 DB2 Wire Protocol Driver
AddStringToCreateTable=
AlternateID=
Collection=OS/390 and AS/400 (leave blank for DB2 UDB)
Database=DB2 UDB (leave blank for OS/390 and AS/400)
DynamicSections=100
GrantAuthid=PUBLIC
GrantExecute=1
IpAddress=DB2 server host
IsolationLevel=CURSOR_STABILITY
Location=OS/390 and AS/400 (leave blank for DB2 UDB)
LogonID=UID
Password=PWD
Package=DB2 package name
PackageOwner=
TcpPort=DB2 server port
WithHold=1
[dBase]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARdbf20.sl
Description=DataDirect 5.0 dBaseFile(*.dbf)
ApplicationUsingThreads=1
CacheSize=4
CreateType=dBASE5
Database=$HYPERION_HOME/common/ODBC/Merant/5.0/demo
DataFileExtension=DBF
ExtensionCase=UPPER
FileOpenCache=0
IntlSort=0
LockCompatibility=dBASE
Locking=RECORD
UseLongNames=0
UseLongQualifiers=0
[FoxPro3]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARdbf20.sl
Description=DataDirect 5.0 dBaseFile(*.dbf)
ApplicationUsingThreads=1
CacheSize=4
CreateType=FoxPro30
Database=$HYPERION_HOME/common/ODBC/Merant/5.0/demo
DataFileExtension=DBF
ExtensionCase=UPPER
FileOpenCache=0
IntlSort=0
LockCompatibility=Fox
Locking=RECORD
UseLongNames=0
UseLongQualifiers=0
[Informix]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARinf20.sl
Description=DataDirect 5.0 Informix
ApplicationUsingThreads=1
CancelDetectInterval=0
CursorBehavior=0
Database=db
EnableInsertCursors=0
GetDBListFromInformix=1
HostName=Informix host
LogonID=UID
Password=PWD
Protocol=onsoctcp
ServerName=Informix server
Service=Informix service name
TrimBlankFromIndexName=1
[Informix Wire Protocol]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARifcl20.sl
Description=DataDirect 5.0 Informix Wire Protocol
ApplicationUsingThreads=1
CancelDetectInterval=0
Database=db
HostName=Informix host
LogonID=UIDUID
Password=PWDPWD
PortNumber=Informix server port
ServerName=Informix server
TrimBlankFromIndexName=1
[Oracle]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARor820.sl
Description=DataDirect 5.0 Oracle
ApplicationUsingThreads=1
ArraySize=60000
CatalogIncludesSynonyms=1
CatalogOptions=0
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=UID
OptimizeLongPerformance=0
Password=PWD
ProcedureRetResults=0
ServerName=Oracle host
UseCurrentSchema=1
[Oracle Wire Protocol]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARora20.sl
Description=DataDirect 5.0 Oracle Wire Protocol
ApplicationUsingThreads=1
ArraySize=60000
CachedCursorLimit=32
CachedDescLimit=0
CatalogIncludesSynonyms=1
CatalogOptions=0
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
HostName=Oracle server
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=UID
Password=PWD
PortNumber=1521
ProcedureRetResults=0
SID=Oracle SID
UseCurrentSchema=1
[Progress9]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARpro920.sl
Description=DataDirect 5.0 Progress SQL92
DatabaseName=db
HostName=Progress9 host
LogonID=UID
Password=PWD
PortNumber=Progress9 server port
[Progress10]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARpro1920.sl
Description=DataDirect 5.0 Progress OpenEdge
DatabaseName=db
HostName=Progress10 host
LogonID=UID
Password=PWD
PortNumber=Progress10 server port
[SQLServer Wire Protocol]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARmsss20.sl
Description=DataDirect 5.0 SQL Server Wire Protocol
Address=SQLServer host,SQLServer server port
AnsiNPW=Yes
Database=db
LogonID=UID
Password=PWD
QuotedId=No
[Sybase Wire Protocol]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARase20.sl
Description=DataDirect 5.0 Sybase Wire Protocol
ApplicationName=
ApplicationUsingThreads=1
ArraySize=50
Charset=
CursorCacheSize=1
Database=db
DefaultLongDataBuffLen=1024
EnableDescribeParam=0
EnableQuotedIdentifiers=0
InitializationString=
Language=
LogonID=UID
NetworkAddress=Sybase host,Sybase server port
OptimizePrepare=1
PacketSize=0
Password=PWD
RaiseErrorPositionBehavior=0
SelectMethod=0
WorkStationID=
[Text]
Driver=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/ARtxt20.sl
Description=DataDirect 5.0 TextFile(*.*)
AllowUpdateAndDelete=0
ApplicationUsingThreads=1
CacheSize=4
CenturyBoundary=20
Database=$HYPERION_HOME/common/ODBC/Merant/5.0/demo
DataFileExtension=TXT
DecimalSymbol=.
Delimiter=
FileOpenCache=0
FirstLineNames=0
IntlSort=0
ScanRows=25
TableType=Comma
UndefinedTable=GUESS
[ODBC]
IANAAppCodePage=4
InstallDir=$HYPERION_HOME/common/ODBC/Merant/5.0
Trace=0
TraceDll=$HYPERION_HOME/common/ODBC/Merant/5.0/lib/odbctrac.sl
TraceFile=odbctrace.out
UseCursorLib=0
*.Profile file*
HYPERION_HOME=/hyper/arbor/Hyperion
ESSLANG=English_UnitedStates.Latin1@Binary
SHLIB_PATH=.:/hyper/arbor/Hyperion/common/ODBC/Merant/5.0/lib:/hyper/arbor/Hyperion/AnalyticServices/bin:$SHLIB_PATH
PATH=$PATH:$ARBORPATH/bin:/usr/lib:$ARBORPATH:$HYPERION_HOME/common/ODBC/Merant/5.0/lib
LD_LIBRARY_PATH=$HYPERION_HOME/common/ODBC/Merant/5.0/lib
ulimit -c unlimited
ulimit -n 1024
LIBPATH=/hyper/arbor/Hyperion/common/ODBC/Merant/5.0/lib
LANG=en_US
ODBCINI=/hyper/arbor/Hyperion/Essbase/bin/.odbc.iniThe essbase user needs to be restarted to be able to see the new odbc.ini entries.
After editing the files you mentioned, did you restart the essbase services?
At the very least, did you exit EAS, then restart EAS? (I don't remember which one of these will do it.) If your entries are correct, then one of these should get the essbase user to 'see' the odbc connection.
Also, it might help to remove extraneous entries in the .odbc.ini file, kind of difficult to read thru all of that.
Robert
Edited by: RobertR3 on Mar 17, 2009 10:19 AM -
Issue with Supplier Open Interface Import Program
Hello Folks,
I need help with supplier conversion. I am trying to load suppliers through the supplier open interface program. I see that the record got rejected in AP_SUPPLIERS_INT table with status as REJECTED. However i do not see the record in AP_SUPPLIER_INT_REJECTIONS. Therefore, i am not able to understand the rejection reason. I enabled debug can seeing this log..
assign_party_usage (+)
do_assign_party_usage (+)
effective_start_date = 2011/05/12 effective_end_date = 4712/12/31
duplicates_exist (+)
No date tracking for this usage SUPPLIER. Check duplicate assignment.
l_has_duplicates = Y
duplicates_exist (-)
assign_party_usage (-)
Rejected Vendor_Interface_Id: 15004, No. of Messages from Create_Vendor API: 2, Message From Create_Vendor API:
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00999: Custom Report
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
MSG-00004: After Importing Suppliers
MSG-00005: After Get_Header_Information
MSG-00020: After SRWEXIT
As per my understanding from the log, there is some problem with party_usage_assignment. I would really appreciate is someone can help me debug the exact problem. Else i would have to open a SR for this
Thanks so much looking forward for your answers.Pl post details of OS, database and EBS versions.
Pl see if MOS Doc 1060824.1 (R12: Supplier Open Interface APXSUIMP Errors with REP-0004 Output Does Not Indicate Reason for Rejection) is applicable
HTH
Srini -
Usability issue with the AUR interface
Particularly with commenting, voting, and deleting comments. When you do any of these actions, the page simply tells you that what you have done was successful. To increase usability, wouldn't it be smart (and simple) to provide a link to the user to go back to the page they were at, i.e. the package's AUR page? It's something small that could make the AUR a lot more friendly to the user.
The AUR source code is here, if you would like to have a look through it and submit a patch for the above. If not, browse the AUR's bug tracker and submit a feature request, if it's not already there.
The forum is not the best place for these things, because there's no guarantee that the right dev, or any dev, will see it. -
3.3EA1 Issues with report generator interfaces
Trying to build out a few reports in the EA version and noticing a few issues:
1. When you first launch the report wizard the template drop down and manage button are greyed out. If you click another option from the available reports tab then they become active.
2. If I pick a Template, then select a Report Configuration, the Template gets blanked out and disappears from the drop down list. So I can't use a report configuration (having selected a few sub views or specific tables) and a custom template? I have to exit the report builder and re-enter to get the Template drop down to re-appear.
Thanks.Hi Kent,
We saw this bug and it's already fixed.
Thanks. -
Strange issue with the render percentage indicator
Hello,
I'm getting a strange issue with the FCPX interface - the little gauge that shows the percentage complete a render is - seems to have gone crazy! and is spinning round. I've tried changing project/ restarting fcpx and also restarting the mac!
heres a screen capture of it in action... https://www.dropbox.com/s/o9bwexyuntx0jxd/what.movThis is traced back to a backup issue.. Hopefully a fix will come with 10.1.4
At this time, the solution is to turn off backup per library...
10.1.3 update "backup" mess -
ISSUE WITH SUPPLIER SITE OPEN INTERFACE IMPORT PROGRAM in R12
I am facing issue while submitting supplier site open interface import program programmatically using fnd_request.
I am uploading the interface tables with the mandatory data and running the standard Request Set for Suppliers.The program is creating the Suppliers but is unable to create the Supplier Sites.It is getting completed with no rejections as well as imported records.
It is updating the Supplier Sites Interface table (ap_supplier_sites_int ) with status as rejected with no rejected records in ap_supplier_int_rejections table.
I am using the following code.
Step 1 - call set_request_set
apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling set_request_set...');
success := fnd_submit.set_request_set ('SQLAP', 'FNDRSSUB852');--'FNDRSSUB1703');
IF (NOT success)
THEN
RAISE srs_failed;
ELSE
apps.fnd_file.put_line (apps.fnd_file.LOG,
'Calling submit program first time...'
END IF;
-- Step 2 - call submit program for each program in the set
success :=
fnd_submit.submit_program ('SQLAP',
'APXSUIMP',
'STAGE10',
'ALL',
1000,
'N',
'N',
'N',
CHR (0)
IF (NOT success)
THEN
RAISE submitprog_failed;
END IF;
apps.fnd_file.put_line (apps.fnd_file.LOG,
'Calling submit program second time...'
success :=
fnd_submit.submit_program ('SQLAP',
'APXSSIMP',
'STAGE20',
'ALL',
1000,
'N',
'N',
'N',
CHR (0)
IF (NOT success)
THEN
RAISE submitprog_failed;
END IF;
-- Step 3 - call submit_set
apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling submit_set...');
req_id := fnd_submit.submit_set (NULL, TRUE);
IF (req_id = 0)
THEN
RAISE submitset_failed;
END IF;
apps.fnd_file.put_line (apps.fnd_file.LOG, 'Finished.');
And in the interface table the record status is rejected and ther is no corresponding record in ap_supplier_int_rejections.
but the supplier is getting created succesfully.
### Steps to Reproduce ###
INSERT INTO ap_suppliers_int
(exclusive_payment_flag,
vendor_interface_id,
vendor_name,
segment1,
vendor_type_lookup_code,-- set_of_books_id,
status
VALUES ('N', --'N',
ap_suppliers_int_s.NEXTVAL,
'TEST_REC4',
4428813,
'VENDOR', --2041,
--rec_spl_site_bank_hdr.set_of_books_id,
'NEW'
INSERT INTO ap_supplier_sites_int
(vendor_site_interface_id,
vendor_interface_id,
vendor_site_code,
address_line1,
city,
state,
zip,
country,
operating_unit_name,
status --exclusive_payment_flag
VALUES (ap_supplier_sites_int_s.NEXTVAL,
-- VENDOR_SITES_INTERFACE_ID
ap_suppliers_int_s.CURRVAL,
-- VENDOR_INTERFACE_ID
'REC_VDR_SITE4',
-- VENDOR_SITE_CODE
'REC_ADDR4',
-- ADDRESS_LINE1,
'REC_CITY4', --CITY
'REC_STATE4', --STATE
3442121,
'US', -- COUNTRY,
' Test US Operating Unit',
'NEW'
);Hi
I have the same issue with ap supplier sites interface program .. Did your problem got solved..I will be thankfull for any help
Thanks -
Issue with provided message for WSDL of SAP PI sender interface
Hi,
as I am not familar with SOAP interfaces and use of WSDL by partners with WSDL generated in SAP PI there are some issues that I have with a scenario:
1. Import of external xsd for message is done
2. Enterprise Repository and Integration Directory objects are completely created and activated
3. WSDL was generated from ID Sender agreement (This is PI 7.1)
4. Partner got the WSDL
The partner provided now some test messages by mail that I would like to test in the mapping as the message is really complex.
But the result is strange...
1. The header of the partner message is this:
<XJustiz_Daten xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Grunddaten xmlns="http://www.xjustiz.de">
(Some german words are in that example. But this doesn t matter!)
This is different to the xml that PI generates in mapping:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:XJustiz_Daten xmlns:ns0="http://www.xjustiz.de">
<ns0:Grunddaten>
<ns0:Grunddaten XJustizVersion="">
Partner defines xsi: instead of ns0 and PI fails using this message!
So I had to change the message header and add ns0: to all element tags and node tags of the message.
(See for example with first node "Grunddaten").
2. There are some mandatory nodes and elements.
An example:
- Rechtsform is mandatory node (1..1) with element content (mandatory 1..1)
So it will appear in the payload like this:
<ns0:Rechtsform>
<ns0:content xmlns=""/>
</ns0:Rechtsform>
But the partner provides this:
<Rechtsform xsi:nil="true" />
which is the next issue as PI doesn t understand as xsi is not mapped to a namespace. !
It would be easy to use an "exist" function to solve the issue with the not provided element but this will not help
when the node is provided with additinal information xsi:....
Can you give any help/answer why PI is not able to handle such things.
Thank you!
Best regards
DirkHello Meinhard,
If you are the Service Owner, the sender system must use your wsdl message (WebService Definition).
If there're other problems or the sender system can't use your message structure, in agreement with them you need to develope a different mapping. -
Issue with external WSDL in own Outbound interface using SOAP UI
Hello,
this is the issue:
a) Imported an external WSDL to PI as external definition
b) Added external definition to a sync. Service interface
c) Completed configuration and created a WSDL from the sender agreement in Directory (this is PI 7.1)
d) imported the WSDL from c) to soap UI which we are using for testing interfaces
(already successful with other sync interface where the WSDL from c) contains a message type created in PI
e) testing this interface results in an error:
Error message in MONI:
SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_TestTrigger_Testm~</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:props. Value</SAP:P3>
<SAP:P4>s missing in queue context. Target XSD requires a~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_Test_Testm; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:props. Values missing in queue context. Target XSD requires a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
This is the message as it looks like in soapUI:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:com="http://jusit.hp.com/sys/common/">
<soapenv:Header/>
<soapenv:Body>
<props>
<com:Property>
<com:PropertyName>A</com:PropertyName>
<com:PropertyValue>1</com:PropertyValue>
</com:Property>
</props>
</soapenv:Body>
</soapenv:Envelope>
This is the payload in MONI as it comes from SOAP UI (using http connection):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Mapping der Request-Message -->
<props xmlns:com='http://jusit.hp.com/sys/common/' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/'>
<com:Property>
<com:PropertyName>A</com:PropertyName>
<com:PropertyValue>1</com:PropertyValue>
</com:Property>
</props>
This is the payload as it looks like in Mapping Test in Enterprise Repos. from implemented ext.def.:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:props xmlns:ns0="http://jusit.hp.com/sys/common/">
<ns0:Property>
<ns0:PropertyName>A</ns0:PropertyName>
<ns0:PropertyValue>1</ns0:PropertyValue>
</ns0:Property>
</ns0:props>
Is there any restriction with external definitions to be used in PI which could be the reason for this strange behaviour?
The implementation contained a message type created in PI earlier which was running successful!
The problem came up with the external definition!
Thank you for your help!
Best regards
DirkHi,
the problem is not the mapping as it is 1:1 with the same message on both sides.
But when I replace the "com"s with "ns0" and "props" with "ns0:props" in the request in soap UI
the payload will be accepted and mapping is successful!
So the issue is about the modification soap UI is doing on the imported WSDL.
a) Generated request in soap UI from imported WSDL: FAILS in PI!!!!
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:com="http://test.ap.com/sys/common/">
<soapenv:Header/>
<soapenv:Body>
<props>
<com:Property>
<!You may enter the following 2 items in any order>
<com:PropertyName>?</com:PropertyName>
<com:PropertyValue>?</com:PropertyValue>
</com:Property>
</props>
</soapenv:Body>
</soapenv:Envelope>
b) Modified request in soap UI from imported WSDL: WILL BE PROCESSED IN PI
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="http://test.ap.com/sys/common/">
<soapenv:Header/>
<soapenv:Body>
<ns0:props>
<ns0:Property>
<!You may enter the following 2 items in any order>
<ns0:PropertyName>B</ns0:PropertyName>
<ns0:PropertyValue>5</ns0:PropertyValue>
</ns0:Property>
</ns0:props>
</soapenv:Body>
</soapenv:Envelope>
But is there any possibility to avoid this effect in soap UI?
Regards
Dirk -
Issues with ldap_add via LDAP Interface on WS 2008 R2 from WGM for mounts
Important Setup Information:
Active Directory domain on Windows Server 2008 R2
Extended AD Schema to include apple-* attributes
Mac OS X Snow Leopard Server 10.6.2 bound to Active Directory
Connected to Active Directory Forest in Workgroup Manager with Domain Admin / Schema Admin credentials.
The Issue:
When attempting to configure a Home path using an SMB URL using the following attributes:
Mac OS X Server/Share Point URL:
smb://gio-storage-01.giodivine.com/Users
Path to Home Folder:
user 01
Full Path:
/Network/Servers/gio-storage-01.giodivine.com/Users/user01
I receive the following error:
*Not authorized.*
This action failed because you are not authorized to perform the operation.
I checked the console, and found the following (completely useless) error:
Got unexpected error of type eDSPermissionError (-14120) on line 574 of /SourceCache/WorkgroupManager/WorkgroupManager -361.2.1/Plugins/UserAccounts/UserVolumesPluginView.mm
I enabled diagnostic logging of the LDAP Interface on the Active Directory server and acquired the following error attributed to the "permissions" issue that Workgroup Manager emits:
Internal event: Function ldap_add entered
Internal Event: The LDAP server returned an error.
Additional Data
Error value:
00000057: LdapErr: DSID-0C090C30, comment: Error in attribute conversion operation, data 0, v1db0
So; it would appear that there is some issue with the Active Directory schema extensions, or that the UserVolumesPluginView module is not referencing the schema correctly. My expectation would be that an apple-mount object be created to describe the mount point in /Network/Servers and that the unixHomeDirectory attribute on the User object would be set to the newly created map point.
The latter occurs, i.e. the unixHomeDirectory attribute is set to:
/Network/Servers/gio-storage-01.giodivine.com/Users/user01
The map point is never created in Active Directory, however. It did create a new container in AD at the root, i.e. cn=Mac OS X,dc=giodivine,dc=com, but nothing is ever created there.
I have attempted to completely remove all of the extended schema changes, re-compare an OD master against the AD PDC, recreate the schema changes LDF, and re-apply the changes to no avail.
Any information as to how I can find out exactly what call to ldap_add is being made so that I can somehow track down the faulty schema extension attribute would be helpful. Are there ways to enable verbose diagnostic logging of Workgroup Manager and it's accompanying modules?
Thanks in advance!
Deavon M. McCaffery
<Edited by Host>Hi Scot,
Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
after testing.
And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
If issue still exists, please try the steps below as well:
1. Please check DCOM Server Process Launcher service is started.
2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
Note: Backup the key before edit incase it cause any issue.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
Find "ObjectName" and change the value to LocalSystem.
Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
If DCOM still not work, please compare the content of the following key with a working server:
HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
Edit if there is any difference and make sure you created a backup of the key before editing.
If you have any feedback on our support, please send to [email protected] -
Interface freeze issue with Flash Projector
I am facing an interface freeze issue with Flash Projector running a flex state based application. A Flash Projector exe was generated from a standalone flash player ver 10.2. The target machine on which the problem occuresd has 10.3.
Basically "screen freeze" means that the user interface is running as usual on Flash Player, but it's not responding to any user input (like button presses). But if we alt-tab to another application, the state changes in the Flash player. There is display with buttons on the screen, but touching the buttons or doing anything else - it did not respond. Rebooting the computer fixes the problem.
Can you suggest why this is happening? Is there any known bug in Flash Player.
The problem is this is being hard to reproduce on the developer workstation as it doesn't happen always. But it happens quite often on the target machine running an Intel Atom N270. What debugging steps can you suggest?
Problem Description : http://www.youtube.com/watch?v=z25oV9QWRykFirst, thanks for the video. Having this always makes it much easier to understand the problem. A couple of recommendations. First, if you feel like this might be a player bug, please add a new bug report over at bugbase.adobe.com and if possible please include any sample code or swf's that can help us reproduce the problem internally. Linking the video would also be great. In addition, would you mind reposting this question over on the Flash Professional forums? This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience who might have additional feedback.
Thanks,
Chris -
Having 2 small issues with 10.4.3 interface - shift click & control click
I am having two issues with 10.4.3 on my mom's computer.
1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
2) I am in iPhoto and would like to select multiple film rolls (consecutive rolls) by clicking the first and then clicking the last one that I would like and it is working like I am comand clicking and only selecting the two rolls that I have clicked on and not the ones in between.
Any help in how to work this out would be great.
Happy Turkey Day!
K1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
Do you have any third-party items in:
/Library/Contextual Menu Items/
/Users/YourUsername//Library/Contextual Menu Items/
If you do, try dragging them onto your Desktop and then retry control-clicking. -
Issue with reporting interface - CO EP reports
Hello -
We have set up a CO report using report painter (GRR1). We are having an issue with this report when it drills down to KSB1 transaction to display the CO lines. I have checked the OSS notes related to this issue and one of them matches with the issue I am encountering.
Note 311364 - BBS: brnch to CO EP reprts w/ charactrstc RESP_FLAG - When you branch from Report Painter/Report Writer reports which use the characteristic 'Object type', these selections are not taken into account by the CO line item reports. The error occurs if the characteristic RESP_FLAG is used in the report called up.
We are currently on ECC 6.0 and this note is only applicable to versions 45A and 45B. When I check the program in my ECC 6.0 system, the corrections mentioned in the note are NOT being applied. Is there a way to fix my issue by reapplying the note ?
Regards,
JHi John,
as you've already identified the issue your basis team has 2 ways to solve the case:
1: deimplement the note and implement the last version again
2: (if the code is still missing), enter it manually.
Maybe you should raise a SAPNET message as this case is not normal...
Apart from that: if the note is not implemented properly why can't you tell the basis-team this case and they have to look for a solution?
Best regards, Christian -
PO outbound interface - Issue with Unit of measure
Hi,
I am facing issue with unit of measure.
1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
Thanks.
Regards,
Shahu
Edited by: shahuraj shirure on Mar 5, 2008 1:06 AMIts always that while sending Units from SAP, it needs to be sent in ISO code and SAP always receives units of measure in the ISO unit format only.
Maybe you are looking for
-
Flash Video fulll screen x86 and x64 bits
I was watching this video: http://s1.animeid.com/video/561/naruto-shippuden-151.html I am using this configuration: Ubuntu 9.10 all updates Linux Adobe Flash player 10 ( yes the official restricted) Firefox Linux 3.5.8 Ubuntu Cannonical Version Video
-
Imac for Pro Digital Photography....
I do quite a bit of digital photography with high-end digital backs, was wondering if there would be a significant difference in buying a Mac Pro versus the 2.8 extreme or the 2.4 Imac with an equivalent amount of ram, say 4 gigs. The cost would be g
-
Mouse does not respond to clicks for 10mins after startup
When I start my iMac I have to wait at least 10mins before it will respond to any mouse-clicks, the mouse will move but not register any clicks. The same is true for the keyboard; it does not register any input for at least 10mins. This has only star
-
Problems with camera calibration
Hi! I am trying to create a project that realises stereo vision with two cameras using the VIs provided by LabVIEW. During development I ran into problems with the calibration of my camera(s). My questions are: I would like to calibrate the camera-im
-
.exe files: How do I open them?
Lately I had some downloads coming in with the extension .exe I cannot find any appliaction on my computer that is capable of opening them. Any help would be appreciated. PP