Issue with creating/Launching a Business Rule

Hi All,
I'm using Hyperion version 11.1.2. When creating Business Rule in EAS console, we can't use admin user right ? Is there any specific reason for that ? I've created one other user called "BRadmin" and given admin privileges to all areas. I've logged in EAS console with the new user ID BRadmin and under "Business Rules" i'm trying to create a new Business Rule BR1. In the associated outline area when i'm trying to select "Select outline" no applications are showing under planning and the planning applications are available under Essbase node. For Business Rules, i should select Planning Application under Planning node right ? Why it is happening. I'm unable to select the Planning application from Planning node and due to this, i'm unable to see the Business Rule in Data Forms in Work Space. Pls. advice

I did Stop the following services, planning, EAS, hyperion RMI.
& Started them up RMI, EAS, Planning.After this have you logged in the planning application, before selecting business rules in EAS?
1. Have you selected Calculation module as Business Rule during outline creation? if not select Calculation module as BR.
2. Right click on the business rule node and select refresh user list.
Cheers..!!!

Similar Messages

Priority launch of business rules

Hi!
I have a BR question and can't seem to get it resolve.
I created three BRs then I attached my BRs in Planning form with run on save, but when I save the form the BR I don't know what is sequence launch of business rules. Who is the first and who is the last?
Any idea/thoughts will be very much appreciated!
Alexander

You could put these rules in a sequence and there you can specify the order.
Cheers,
Amol

Problem with two of my business rule triggers

Good morning every one,
I have a small problem with two of my business rule triggers.
I have these tables:
pms_activity
csh_cash
csh_integrate_leh
csh_integrate_led
and my process goes like this:
upon approval of a row in my pms_activity table I have a trigger that insert a row in my csh_cash - and in the csh_cash table I have a trigger that will insert in the csh_ingerate_leh and csh_integrate_led.
my problem is pms_activity does generate a row in csh_cash but the trigger in the cash does not fire to generate a row in the csh_integrate_leh and led tables.
I have generated in the following order after I created my business rule:
I have generated the table from the designer (server module tab)
I have generated the CAPI from the head start utility
I have generated the API from the designer
I have generated the CAPI from the designer
I have run the recompil.sql
I have checked that my business rule trigger is enabled and should run on insert and no where restriction
=== this is my business rule logic ======
l_rule_ok boolean := true;
begin
trace('br_csh001_cev (f)');
csh_gl_pkg.csh_gen_integ_jvs(p_id
,p_ref_num
,p_own_id
,p_trt_id
,p_value_date
,p_description
,p_amount
,p_cur_id
,p_gla_dr
,p_gla_cr
,p_gla_pl
,p_gla_rev
,p_gla_eqt);
return l_rule_ok;
exception
when others
then
qms$errors.unhandled_exception(PACKAGE_NAME||'.br_csh001_cev (f)');
end br_csh001_cev;
==== end =======================
Any help will be appreciated as I have struggled with this for two days.
Thanks

hmmm...
Try resetting it again and restoring with the same backup file...
Does the phone work properly once you've reset it before you try restoring? A lot of people here have experienced problems restoring from backups... could be worth forgetting about it and starting from scratch.
You could try contacting your nearest Nokia Service Centre (www.nokia.com/repair) and see if they can do anything - it may need the firmware reinstalling or upgrading... possibly... give them a call though and see.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Launching of business rule

hi ,
If i have business rule with my cost centre being selected by run time prompt. Now if 2 users from same costcenter launch the business rule selecting the same costcenter at the
same time wil that impact the run time for the business rule?
In short if 2 users launch the same calculation script on essbase database will that have effect on the run time of calc or how exactly would the same calc launched at the same
time by 2 different user run?
Thanks in advance

It will have an affect on the calculation timing, the reason for this is the calculation is attempting to calculate twice over the same set of data blocks specific to the cost centre.
This can be overcome by lowering the LOCKBLOCK settings in cfg file or by calling SET LOCKBLOCK LOW from the BR.
Basically Essbase will calculate the same dataset twice but the impact on timing may be more than double as one run of the BR will lock blocks that the other BR is needing to calculate. One BR waits as one is calculating and vice versa, it is the swapping of the blocks that will affect the timing.
Hope this helps
J

Check which data records have been updated or created by the business rule.

Dear all,
   Is there any way to check which data records have been updated or created by the business rule?
   For ex:
   When I run a data package which execute some standard store procedure and the log shows :
Executing SPRUNCONVERSION 'LEGALAPP', [ACTUAL], [GGGG],'GLOBAL','SPSCOPE_42412','SPLOG_125272'
SPRunConversion Version 2.06
20071200 - 210 Rows Calulated
20071200 - 84 Rows Updated
Anyway to see the data content of "84 Rows Updated "?
Best Regards,
Jeff

Yes each aplication has 3 fact tables:
FACTWB:Real time storage, when you send data it is stored here and this is linked to the FACTWB partition in OLAP which is a ROLAP partition to enable real time updates of the data.
FAC2: Short term storage. If too many records are in the FACTWB the aplication becomes slow because these records need to be queried by the OLAP engine everytime new records are send to the database. To clean up te real time storage you can do a lite optimize, which will move the FACTWB records to the FAC2 partition. this lite optimize can be done even when users are in the system.
FACT: this is the long term storage. When your reporting is finished you can run a full optimize to clean up both FACTWB and FAC2 tables and store it in the FACT table. This contains all your historical records.
Evertime you run a reort, SAP BPC is looking at all 3 partitions and combines the data of the 3 partitions to present the correct value in your report. Remember that BPC is posting differences in the WB and not the final values. So if you have for example a record with 10 in the FAC2 partition and you send 12 to the database for that intersection, BPC will post only 2. When running a report it combines the 10 and the 2 which makes 12.
Hope this makes it more clear.
Joost
Edited by: Joost Hoppenbrouwers on May 6, 2008 12:19 PM : Seems that James and I where writing pretty much the same post at the same time

.Issue with creating a photo book in Iphoto error message states some frames are missing images, but I've checked each one and from I can see they are all filled in. It won't let my buy the book though

Having an Issue with Creating a photo Book in Iphoto. I continue to get an error message when clicking on "Buy Book" The error indicates that I'm missing a frame or frames from the book. I've checked this many times and cannot locate the issue. The book appears to be complete from my perspective. What can I do now? I worked very hard on this and would hate to lose it all.

How did you check the book? Did you preview it?
See:
iPhoto, Aperture: Previewing an order in iPhoto or Aperture
Is that the message?
"your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book."
The most common reason for this error is, that you have used a page layout that needs a background photo and you have not yet added the backdrop. Then the book is still showing some default grayscale image.
Check, if one of your page layouts is using this background:
Then you need to add a photo to the background of the page.

Problem with create universe on Business Objects XI 3.1 base on SAP Query

Hello,
I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
The problem is hierarchy. Massage on Busines Objects is :
OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition "HIERARCHY NOT FOUND" raised.(WIS 10901)
Query in BEX run OK.
Best regards.
Ela.

Hello,
Thanks for response.
When I run BEX QUERY, all works OK.
All hierarchies was created and activated on system BW.
This situation appears after upgrade BW to SAP NetWeaver 7.3.
Before upgrade I created universe without any problems.
Regards Ela

Issue with Creating Forecast Profiles/Forecasting

Hello Experts,
We are facing an issue with creating forecast profiles.
We have two FYVs defined in our system, one with 52/53 fiscal weeks (Fiscal Variant W1) and the other with 12 fiscal months (FYV M1), Our storage buckets profile (STP) uses W1, since we have many dataviews that use W1 as the FYV in the attached Planning buckets profile(PBP). We also have dataviews that display in fiscal months (use FYV M1 in the attached PBP), data from Fiscal weeks will be aggregated and shown in Fiscal months . We need to do forecasting using FYV M1, that is forecast in Fiscal Months , but since the storage bucket profile has W1 which is used in the Planning Area config. We are unable to create any Forecast profiles with FYV M1 . Please note that we cannot use M1 in STP because when we used M1 in STP, we could not create dataviews in fiscal weeks (using W1)
1. Is there any way we can forecast using M1 while having assinged W1 to the Planning area/STP ?
2. OR we are willing to assing M1 to PA, provided we can use W1 in some of the dataviews, unfortunately we were unable to do this, though the vice versa is possible i,e. we could have W1 in STP and M1 in some of the related PBPs/ Weekly Dataviews.
Please let me know if any of these are possible or if there is any alternative way to do forecasting in Fisc Months.
Thanks
Tej

Hi,
You are correct, the Storage bucket profile always has to be at a detailed level. Time bucket profile can be at higher levels like monthly, quarterly etc.,
Coming to the root of your problem, which is you are unable to forecast at a level other that what is specified in your Storage bucket profile, unfortunately the answer is no.
You can do a forecast only at the level at which the data is stored and not at the level at which the data is viewed.
One work around for this is to create an additional planning area with the same MPOS and this addl PA can contain only those bare minimum KF required for your forecast. After you generate your forecast, you can copy it to your Weeks based PA and then proceed from there. This copy of KF between PA is much faster as it will happen at LC level and should not cause time delays.
NOTE - You have to exercise caution when you are using 2 periodicities i.e., weeks and months, if you are using standard SAP calendar then you are good to go. If you are creating custom Fiscal variants pls ensure the start and end of a month is same in both the weekly and monthly variants. Failing which, there will be mismatch of data between the two dataviews.
Hope this helps.
Thanks
Mani Suresh

Issue with creating List of Values in Business View Manager

Hi,
Could any one help me to figure out what this issue refers to?
When i created a List of Values in Business View Manager, it is throwing the following error!!!!
The List of Values used by this parameter cannot be based on a Business View derived from the current Data Foundation or Business Element.
Prior to creating LoV, i've done successfully with creating Data connection, Data foundation, Business element and Business View..
Thanks
Viswa

Hi Visaw,
Firstly,
-->Open Repository Explorer,
-->where you are have related DF,DC,BV,BEand LOV's
-->Right click on LOV's -->There you can find Schedule list of values.Then schedule list of values and check if it prompts for errors.
If you face the same problem, what is the error you are getting.
Else try to use the LOV's and proceed further.
-->Check whether the LOV's are pointing to the same Business View and check the Business view pointing to the same Datafoundation.
If you are facing the same problem then try with the below steps:
-->Try to Create a report at designer level Using then Business view
-->Create two new parameters and select the existing parameters(LOV parameter's)
-->Check whether it is working.
-->If you face the same problem ,Update the connection of Business view manager.
Go to Database tab-->Select Set DataSource location and update it with current Businessview Manager.
Try this ,and let us know.
Regards,
Navin

CS4 issues with Microsoft Office Small Business 2007? Other apps?

I recently purchased the CS4 upgrade and a new laptop. Last night after nearly 7 hours I finally got it all installed and working correctly. I had the versioncue.dll error which caused most of my pain. Anyway... I've been lurking on the forums since CS3 launched but passed on it due to all the issues I had read about it's installer, finally I felt I needed to take the plunge and upgraded my software (from MX2004 suite). My question is this.
Currently I have a very clean laptop with only:
Kaspersky 2009 and CS4 installed.
I'm looking to install Microsoft Office Small Business 2007 but I have a concern with the Small Business Manager SQL Server. From other post I've seen that the sql servers have conflicted with adobe applications, has anyone had any issues with this or should I be able to install it now without issue. I'm trying to pre-emptivly make sure I don't screw something up and have to install everything again from scratch.
My end goal would be to have: Kaspersky security suite 2009, CS4, MS office Small Business 2007, Paragon back up application. At that point I want to create a restore and if anything happened I'd have the bulk set up easily again.
Does anyone have any other no no's about what does and does not play well with CS4?
My Setup:
Gateway FX 7805u laptop
dual core centreno 2 2.26
4 gigs DDR3
Geforce 9800m gts 1 gb
320 gb 7200 harddrive - not sure on make
Vista 64
All drivers up to date except the new Nvidia drivers as they are still beta
Thank you in advance.

I should also have mentioned (ask) about the fact that when I first installed I had gotten all the way past the initial installer and to the updates so the suite had already been activated/registered.
After getting the versioncue.dll error it has you remove the suite and many folders pertaining to it. So after I did all that and reinstalled it automatically put my info back in for me (obviously one of the folders it doesn't have you move) and I don't recall it re-registering it again. I'm assuming I am fine with my activations and it only counted it once as it was the same machine with an uninstall/reinstall? Everything seems to be working ok, i'm just curious as to what it actually did? Did it take another activation or no? I'm planning on installing to my desktop as well as soon as I get the board/proc replaced, so i'm just looking down the road for potential issues.
Thanks again.

Problem with balance carry forward business rule and automatic adjustments

Hi All,
I faced with issue when run BCF business rule and consolidation process. According sap courses BPC440 members with A(automatic adjustments) type should carry forward automatically, and I(imputable), M (adjustments) members should carry forwarded by bcf business rule.
When I set up my BCF business rule I use property "Category_for_ope" in Category dimension. But this rule not work properly, then I use notes:
1784365 - Category_for_ope property should not effect Consolidation.
1902677 - The property category_for_ope shall work for consolidation
After applying those notes, system work as I aspect. After i run consolidation first time system carry forward my automatic adjustment from Category "Expected" to "PLAN_Y0" and this is correct!!!. But when i run consolidation process second and third time system duplicated automatic adjustments in Category "PLAN_Y0".
Someone can help me with this Issue?
And sorry for my english

Hi,
Can you try as follows :
*RUN_PROGRAM COPYOPENING
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
*ENDRUN_PROGRAM
hope it helps...
regards,
Raju

File to RFC/IDOC with a set of business rules applied on every record

Hi experts,
i have a scenario where the following happens
checks need to be performed
1. Technical validations on the file picked up (Can be done through java programs)
2. Business rules to be applied on every record (Am not sure if this can be done in PI) Sample business rules - record id already present in the SAP system, check if some manadatory fields are missing in the record etc..quite a lot to be applied
I assume we use the File>PI>IDOC/RFC scenario for this..
However am not sure on how we apply the complex business rules on every record in file using PI.
Any suggestions??
Regards,
Kalyan

Hi My requirement as follow,
ELEMICA(CIDX)--->sap xi->SAP ECC,i receive CIDX Ordechange document from source system,when it is order change , the similr Order Chnage document available in DATA BASE,i need to retrive it from data base using some key fileds, i need to compare some of the fileds like PO Number,Buyer sequence number..like many fileds.if there is any change while validating then i need to send it SAP ECC Orders IDOC,IF TEH Values are same then i need to exit the process with mail to admin .
How i done my requiremnet i already explained,if you looking for any info let me know,but i never faced any problems like perfromace issues ...but writing JAVA Maping code is bit tough.
Regards,
Raj

Issue with create user and issue with Java Development tab

I have two issues with EP,
1. When i login with Super Admin user, i am unable to Create any user from User Admin tab. Do i have to change the settings of the Super Admin? or is there any criteria for creating the user?
2. How to assign any user the Java Development tab. Though i login with a super admin user i am unable to see the Java Development role and when tried to assign the role, there were no searches for that Java....

Hi Adi,
by default the super administrater has got all permissions. Thus you should be able to create portal users when using a user assigned to the portal group Administrators.
In order to help you with your first question we need more information. Please describe the malfunction in detail. Have a look into the log files and post related error messages.
Regarding your second question: You will find the java development role in PCD
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles/com.sap.pct.pdk.JavaDeveloper.
If not, then you haven't installed the PDK business package in your portal.
Go to service.sap.com, choose downloads and search the package (PDK should do it). Download the package, and deploy on your portal using SDM.
Best regards,
Martin

Problem with FIX-Statement in Business Rule

Hello,
ich have a business rule with two nested FIX-Statements.
I calculate depending on the month in the runtime-prompt a forecast for this month. After that i fix on that month an clear some specific accounts. But some of these accounts still have data.
they are in the cleardata section and they are children of FiBuKonten from the first fix. When i leave out the @CHILDREN("FiBuKonten") in the first fix the accounts are cleared as excepted, but i need that fix because not all accounts are part of this forecast.
I changed everything to work as a calc-script and the same problem appears, on dev and prod database.
Why are some accounts cleared while others not ? Really misterious!
Here is the rule
FIX([TEBIT_RTP_Year],[TEBIT_RTP_Version],"IFRS operativ",[TEBIT_RTP_Entity],"Daten brutto","Daten_brutto_P_M",@CHILDREN("FiBuKonten"))
[TEBIT_RTP_Period](
IF(@ISMBR("Jan"))
Actual_kum = Budget_kum;
ELSEIF(@ISMBR("Feb"))
Actual_kum = Budget_kum;
ELSEIF(@ISMBR("Apr"))
Actual_kum = @ROUND(("1HR"->Dec - Actual_kum->Mar)/9 + Actual_kum->Mar,2);
ELSEIF(@ISMBR("May"))
Actual_kum = @ROUND(("1HR"->Dec - Actual_kum->Apr)/8 + Actual_kum->Apr,2);
ELSEIF(@ISMBR("Jul"))
Actual_kum = @ROUND(("2HR"->Dec - Actual_kum->Jun)/6 + Actual_kum->Jun,2);
ELSEIF(@ISMBR("Aug"))
Actual_kum = @ROUND(("2HR"->Dec - Actual_kum->Jul)/5 + Actual_kum->Jul,2);
ELSEIF(@ISMBR("Oct"))
Actual_kum = @ROUND(("3HR"->Dec - Actual_kum->Sep)/3 + Actual_kum->Sep,2);
ELSEIF(@ISMBR("Nov"))
Actual_kum = @ROUND(("3HR"->Dec - Actual_kum->Oct)/2 + Actual_kum->Oct,2);
ENDIF;)
FIX([TEBIT_RTP_Period])
     CLEARDATA "41000000";
     CLEARDATA "41100000";
     CLEARDATA "41200000";
     CLEARDATA "41990000";
     CLEARDATA "41000900";
     CLEARDATA "41096000";
     CLEARDATA "41196000";
     CLEARDATA "41296000";
     CLEARDATA "41940000";
     CLEARDATA "42000000";
     CLEARDATA "42100000";
     CLEARDATA "42200000";
     CLEARDATA "42099000";
     CLEARDATA "42199000";
     CLEARDATA "42299000";
     CLEARDATA "42990000";
     CLEARDATA "41918000";
     CLEARDATA "41100900";
     CLEARDATA "42091000";
     CLEARDATA "42918000";
     CLEARDATA "54000000";
     CLEARDATA "54009000";
     CLEARDATA "54009900";
     CLEARDATA "54009600";
     CLEARDATA "54130200";
     CLEARDATA "93541175";
     CLEARDATA "54001000";
     CLEARDATA "54001900";
     CLEARDATA "54014000";
     CLEARDATA "54019000";
     CLEARDATA "54021000";
     CLEARDATA "54021900";
ENDFIX
ENDFIX
Thx for your help.
Greets
Kevin

Does it make a difference when a dimension has dynamic calc members and i dont fix on that dimension to fix on the Level 0 members of that dimension ? The result should be the same in my eyes.
SGF is dense. I found out that everytime i the fix includes that first member M_124100 the error occoured.
I changed the rule in the form that i split the FIX Statement. And now it works without the error and with all data cleared. Even when i don`t reorder the dimension SGF.
Again thanks for your help.
Greets
Kevin
FIX([TEBIT_RTP_Year],[TEBIT_RTP_Version],"IFRS operativ",[TEBIT_RTP_Entity],"Daten brutto","Daten_brutto_P_M")
FIX(@CHILDREN("FiBuKonten"))
[TEBIT_RTP_Period](
IF(@ISMBR("Jan"))
Actual_kum = Budget_kum;
ELSEIF(@ISMBR("Feb"))
Actual_kum = Budget_kum;
ELSEIF(@ISMBR("Apr"))
Actual_kum = @ROUND(("1HR"->Dec - Actual_kum->Mar)/9 + Actual_kum->Mar,2);
ELSEIF(@ISMBR("May"))
Actual_kum = @ROUND(("1HR"->Dec - Actual_kum->Apr)/8 + Actual_kum->Apr,2);
ELSEIF(@ISMBR("Jul"))
Actual_kum = @ROUND(("2HR"->Dec - Actual_kum->Jun)/6 + Actual_kum->Jun,2);
ELSEIF(@ISMBR("Aug"))
Actual_kum = @ROUND(("2HR"->Dec - Actual_kum->Jul)/5 + Actual_kum->Jul,2);
ELSEIF(@ISMBR("Oct"))
Actual_kum = @ROUND(("3HR"->Dec - Actual_kum->Sep)/3 + Actual_kum->Sep,2);
ELSEIF(@ISMBR("Nov"))
Actual_kum = @ROUND(("3HR"->Dec - Actual_kum->Oct)/2 + Actual_kum->Oct,2);
ENDIF;)
ENDFIX
FIX([TEBIT_RTP_Period])
CLEARDATA "41000000";
CLEARDATA "41100000";
CLEARDATA "41200000";
CLEARDATA "41990000";
CLEARDATA "41000900";
CLEARDATA "41096000";
CLEARDATA "41196000";
CLEARDATA "41296000";
CLEARDATA "41940000";
CLEARDATA "42000000";
CLEARDATA "42100000";
CLEARDATA "42200000";
CLEARDATA "42099000";
CLEARDATA "42199000";
CLEARDATA "42299000";
CLEARDATA "42990000";
CLEARDATA "41918000";
CLEARDATA "41100900";
CLEARDATA "42091000";
CLEARDATA "42918000";
CLEARDATA "54000000";
CLEARDATA "54009000";
CLEARDATA "54009900";
CLEARDATA "54009600";
CLEARDATA "54130200";
CLEARDATA "93541175";
CLEARDATA "54001000";
CLEARDATA "54001900";
CLEARDATA "54014000";
CLEARDATA "54019000";
CLEARDATA "54021000";
CLEARDATA "54021900";
ENDFIX
ENDFIX

Project Online, Issue with creating projects from EPTs (with workflows)

Hello, I am using Project Online. I am not able to create a new project based on the "Software Development" EPT. I get following message: Sorry, something went wrong An unexpected error has occurred. TECHNICAL DETAILS Troubleshoot
issues with Microsoft SharePoint Foundation. Correlation ID: 29b2b89c-607f-1000-80c2-80bbbb7ff088 Date and Time: 15.09.2014 03:57:25.
Any ideas what went wrong?
Thanks in advance,
Martina

The reason for this behavior was the following:<o:p></o:p>
The currency of the PWA settings have been changed.<o:p></o:p>
Looking into the queue of the EPT we found the following hint:<o:p></o:p>
Project:<o:p></o:p>
ProjectCurrencyConflict (23001). Details: id='23001' name='ProjectCurrencyConflict' uid='f1850fb3-c53c-e411-9a1e-00155d58393b'.<o:p></o:p>
After changing back to settings "Allow projects to be published in various currencies" the workflow works fine.<o:p></o:p>
Nevertheless this issue is not clear for us why it appears after a currency change in the workflow. Maybe a sleeping bug?<o:p></o:p>

Issue with creating/Launching a Business Rule

Similar Messages

Maybe you are looking for