Issue with dynamic table which has RichCommandLink and RichSparkChart

I’m running into an issue when I create a dynamic table with columns of type RichCommandLink and RichSparkChart.
If my table has both of these types of columns, then the RichCommandLink column behaves like a NOP, meaning clicking on it does not cause the link to take effect and does not navigate to the designated page.
If I remove the RichSparkChart column, then the RichCommandLink column behaves properly.
Is there something I’m supposed to be aware of when creating these types of columns? Is there a known problem with RichSparkChart column, like some exception thrown which halts proper rendering of the rest of the columns?
Thanks,
Ania.

Turned out that the problem was with ids which I was dynamically assigning. There was an overlap meaning two columns/elements got the same id. Not the manifestation or behavior I would expect as a result, but once I fixed that, having these two columns side by side works well.

Similar Messages

I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

You would need the original installation disks or files for the Adobe software to get it onto your iMac, and having it on two computers may not be allowed by your university's licensing. Talk to whoever issued the MacBook.
As to the music, just copy it over to the MacBook, either via Home Sharing, file sharing, or an external storage medium (hard drive, USB flash drive, etc.).
Regards.

Issue with Dynamic Link with Premiere CC and After Effects

I'm having a strange and annoying issue with Dynamic linked clips in Premiere CC:
When I render or export my timeline the progress will stall when it hits a dynamic linked clip. It will stay stalled until I click the After Effects application and make it the active window. Once that happens the render/export resumes at normal speed.
This is annoying as I can't start a render and walk away or work on different windows, I have to babysit all the renders to make sure they go through.
Has anybody experienced this and know of any solutions?
I'm running the latest version of Premiere (7.2.1) and After Effects 12.2.0.52 on Mavericks 10.9.1 with a GTX 770 Video Card.

Does it still pause if AE is closed completely? I often experience slower AME renders from Premiere over dynamic link material when AE is open. Closing AE speeds things up. Go figure.

To select table which has TAB as data column with in

Hi All
I have a table which has column type defined as TAB type. When I try selecting the table in PL/SQL developer, I got below error.
What should I do? Even SQL* Plus shows the same error!
SQL> select *
2 from my_tab_cap
3 /
from my_tab_cap
ERROR at line 2:
ORA-00904: : invalid identifierThanks in advance.
Message was edited by:
guru paran
Changed the table name.

You probably want to help us out with all your ddl:
create table tab2 (my_tab_col my_type ) nested table my_tab_col store as my_tab;
create type my_type as table of varchar2(100);
declare
v_type my_type := my_type();
begin
v_type.extend(4);
v_type(1) := 'I like table types1';
v_type(2) := 'I like table types2';
v_type(3) := 'I like table types3';
v_type(4) := 'I like table types4';
insert into tab2(my_tab_col) values (v_type);
end;
select * from tab2;
MY_TAB_COL
VARCHAR(I like table types1,I like table types2,I like table types3,I like table types4)

INSERTING DATA INTO A SQL SERVER 2005 TABLE, WHICH HAS A IDENTITY COLUMN

Hi All,
I have to insert the data into a SQL SERVER 2005 Database table.
I am able to insert the data into a normal SQL Server table.
When I am trying to insert the data into a SQL Server table, which has a identity column (i.e. auto increment column in Oracle) I am getting error saying that can't insert value explicitly when IDENTITY_INSERT is set to OFF.
Had anybody tried this??
There are some SRs on this issue, Oracle agreed that it is a bug. I am wondering if there is any workaround from any one of you (refer Insert in MS-SQL database table with IDENTITY COLUMN
Thanks
V Kumar

Even I had raised a SR on this in October 2008. But didn't get any solution for a long time, finally I had removed the identity column from the table. I can't to that now :).
I am using 10.1.3.3.0 and MS SQL SERVER 2005, They said it is working for MS SQL SERVER TABLE, if the identity column is not a primary key and asked me to refer to note 744735.1.
I had followed that note, but still it is not working for me.
But my requirement is it should work for a MS SQL SERVER 2005 table, which has identity column as primary key.
Thanks
V Kumar

I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC

I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC. The issue has been reported in Japanese by Microsoft. The translation is:
Phenomenon
In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. • MS12-024 (KB2653956)
• MS13-098 (KB2893294)
Error message displayed is as follows.
Incorrect password or user name
Back to the top | feedback
Collapse image Cause
This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
Any string will contain the part of the ... Note:. Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
Back to the top | feedback
Collapse image Solution
If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
Back to the top | feedback
Collapse image Workaround
To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
http://support.microsoft.com/kb/947821
By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool. For this reason, the following log is recorded in the CheckSUR.log.
Recreated value: @ _type.
Recreated value: @ dataOnly.
Recreated value: @ default.
Recreated value: @ description.
Recreated value: @ displayName.
Recreated value: @ handler.
Recreated value: @ legacyName.
Recreated value: @ legacyType.
Recreated value: @ migrate.
Recreated value: @ scope.
Recreated value: @ xsd: type.
Back to the top | feedback
Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. It contains information in response to emerging issues are listed. As a result of the speed of information provided may be
typographical errors are included in the article, you might be revised at any time without prior notice. For other considerations, and use conditions
Please refer to.
Back to the top | feedback
Collapse image Property
December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
This document that was written about products for.
• Windows Vista Business
• Windows Vista Business 64-bit edition
• Windows Vista Enterprise
• Windows Vista Enterprise 64-bit edition
• Windows Vista Home Basic
• Windows Vista Home Basic 64-bit edition
• Windows Vista Home Premium
• Windows Vista Home Premium 64-bit edition
• Windows Vista Starter
• Windows Vista Ultimate
• Windows Vista Ultimate 64-bit edition
• Windows Server 2008 Datacenter
• Windows Server 2008 Datacenter without Hyper-V
• Windows Server 2008 Enterprise
• Windows Server 2008 Enterprise without Hyper-V
• Windows Server 2008 for Itanium-Based Systems
• Windows Server 2008 Foundation
• Windows Server 2008 Standard
• Windows Server 2008 Standard without Hyper-V
• Windows Web Server 2008
• Windows HPC Server 2008
• Windows Essential Business Server 2008
We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected. In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
of their customers know about the problem instead of just one country. Hopefully the original bulletin will be updated with this known issue.

PPoj,
Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future.

Need to make a copy/clone of a table which has sdo_geometry data type

Folks,
We are running Oracle 11gr1 on Suse Linux platform.
We have a requirement, where we need to make a copy of a table, in the same database but in a difference schema, the source table has about 130 millions rows and also has the sdo_getometry data type.
I tried materialized view, but MV does not support sdo_geometry data type.
According to one of my DBAs, doing it via data pump , will take few days, which is not acceptable.
Is there a way, we can make a copy of this table in the same db ?
Thanks
Ashish

Siva,
This is not for backup purpose.
Here is the background information on this requirement.
I need to have a static copy of a table, which has spatial column, sdo_geometry in it.
So we can run another application against this table, just read-only, since we need static data, data in the source table changes quite often.
One of my DBA suggested to have another instance/database, to keep the copy of the source table, I thought idea of having another database just to keep a copy of a table is an over kill.
That is why I had asked this question and you had provided a viable solution.
Then we need to refresh this table , with the data (changes) from the source table, maybe once in 2- 3 weeks.
I tried creating a Materialized view, but it does not support Spatial columns.
So now I am trying to figure out, the most efficient way to refresh the clone table from the source table.
Regards,
Ashish

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

How to read a file which has header and without header

Hi,
I have a file to file scenario wherein there are txt files in the source system, some of which has header and some without header.
How does the sender adapter dynamically identify a file with header and without header.
I knew that File content Conversion in the sender adapter with "Recordsets per message = 1" can read the header. But how to handle dynamically.
Thanks in advance for suggestions and advice.
Regards.
Praveen

Hi,
Let me give a more clear picture:-
One of my file which has header and the corresponding values is listed hereunder:
PERNR;KID;PNALT;NACHN;NAME2;VORNA;TITEL;TITL2 and so on.....
;1200;1200;Angus;; and so on.........
Other file which has no header but only values in it:-
1200;1200;;Werner;Angus and so on.......
The structure remains same for all the files. The only difference is that some of the file has header in it and some without header. The Message Type is mentioned hereunder:-
DT_LegacyEmployee (Category - Complex Type)
     Employees (Category - Element, Occurence - 1)
          Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
               PERNR
               KID
               PNALT
               NACHN
               NAME2 and so on......
I read the file in record row. The file conversion parameters in the file sender adapter are mentioned hereunder:-
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA,TITEL,TITL2 and so on........
How do we dynamically identify whether the file has header or not. Even if the file has header or without header, the file needs to be picked and transferred to the target system. Kindly clarify.
Regards.
Praveen

How to find tables which has more than 1000 Partitions

Hi All,
Is there any other way to find out the tables which has more than 1000 Partitions ?
Apart from SAP report RSDD_MSSQL_CUBEANALYZE. Because this report is not working for me as job getting cancel again and again with ABAP dump DBIF_DSQL2_SQL.I already check SAP Note 1309838, but itu2019s not applicable for us because we are on highest support package level SAP_BW 701 SP06.
Thanks,
Harshal

If you are running SQL Server as your database platform run this query:
select o.object_id,o.name,p.Partition_count from sys.objects o
inner join
(select object_id,count(distinct partition_number) as Partition_count
from sys.partitions
group by object_id)
p
on o.object_id = p.object_id
where o.type = 'U'
order by p.Partition_count desc

Insert performance issue with Partitioned Table.....

Hi All,
I have a performance issue during with a table which is partitioned. without table being partitioned
it ran in less time but after partition it took more than double.
1) The table was created initially without any partition and the below insert took only 27 minuts.
Total Rec Inserted :- 2424233
PL/SQL procedure successfully completed.
Elapsed: 00:27:35.20
2) Now I re-created the table with partition(range yearly - below) and the same insert took 59 minuts.
Is there anyway i can achive the better performance during insert on this partitioned table?
[ similerly, I have another table with 50 Million records and the insert took 10 hrs without partition.
with partitioning the table, it took 18 hours... ]
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 4195045590
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 643K| 34M| | 12917 (3)| 00:02:36 |
|* 1 | HASH JOIN | | 643K| 34M| 2112K| 12917 (3)| 00:02:36 |
| 2 | VIEW | index$_join$_001 | 69534 | 1290K| | 529 (3)| 00:00:07 |
|* 3 | HASH JOIN | | | | | | |
| 4 | INDEX FAST FULL SCAN| PK_ACCOUNT_MASTER_BASE | 69534 | 1290K| | 181 (3)| 00:00
| 5 | INDEX FAST FULL SCAN| ACCOUNT_MASTER_BASE_IDX2 | 69534 | 1290K| | 474 (2)| 00:00
PLAN_TABLE_OUTPUT
| 6 | TABLE ACCESS FULL | TB_SISADMIN_BALANCE | 2424K| 87M| | 6413 (4)| 00:01:17 |
Predicate Information (identified by operation id):
1 - access("A"."VENDOR_ACCT_NBR"=SUBSTR("B"."ACCOUNT_NO",1,8) AND
"A"."VENDOR_CD"="B"."COMPANY_NO")
3 - access(ROWID=ROWID)
Open C1;
Loop
Fetch C1 Bulk Collect Into C_Rectype Limit 10000;
Forall I In 1..C_Rectype.Count
Insert test
     col1,col2,col3)
Values
     val1, val2,val3);
V_Rec := V_Rec + Nvl(C_Rectype.Count,0);
Commit;
Exit When C_Rectype.Count = 0;
C_Rectype.delete;
End Loop;
End;
Total Rec Inserted :- 2424233
PL/SQL procedure successfully completed.
Elapsed: 00:51:01.22
Edited by: user520824 on Jul 16, 2010 9:16 AM

I'm concerned about the view in step 2 and the index join in step 3. A composite index with both columns might eliminate the index join and result in fewer read operations.
If you know which partition the data is going into beforehand you can save a little bit of processing by specifying the partition (which may not be a scalable long-term solution) in the insert - I'm not 100% sure you can do this on inserts but I know you can on selects.
The APPEND hint won't help the way you are using it - the VALUES clause in an insert makes it be ignored. Where it is effective and should help you is if you can do the insert in one query - insert into/select from. If you are using the loop to avoid filling up undo/rollback you can use a bulk collect to batch the selects and commit accordingly - but don't commit more often than you have to because more frequent commits slow transactions down.
I don't think there is a nologging hint :)
So, try something like
insert /*+ hints */ into ...
Select
     A.Ing_Acct_Nbr, currency_Symbol,
     Balance_Date,     Company_No,
     Substr(Account_No,1,8) Account_No,
     Substr(Account_No,9,1) Typ_Cd ,
     Substr(Account_No,10,1) Chk_Cd,
     Td_Balance,     Sd_Balance,
     Sysdate,     'Sisadmin'
From Ideaal_Cons.Tb_Account_Master_Base A,
     Ideaal_Staging.Tb_Sisadmin_Balance B
Where A.Vendor_Acct_Nbr = Substr(B.Account_No,1,8)
   And A.Vendor_Cd = b.company_no
      ;Edited by: riedelme on Jul 16, 2010 7:42 AM

Hello Gurus..... ISSUE with child Table update

I have an issue with child table update
I have created a GTC with one parent table and two child tables. I'm able to update the parent table and the values are found in db, but the ISSUE is the child Table values are not updating the db.
please give me a solution
regards
Srikanth

If you are keeping referential integrity in the database, not in the application, it is easy to find the child and parent tables. Here is a quick and dirty query. You can join this to dba_cons_columns to find out on which columns the referential constraints are defined. This lists all child-parent table including SYS and SYSTEM users. You can run this for specific users of course.
select cons1.owner child_owner,cons1.table_name child_table,
cons2.owner parent_owner,cons2.table_name parent_table
from dba_constraints cons1,dba_constraints cons2
where cons1.constraint_type='R'
and cons1.r_constraint_name=cons2.constraint_name;

Parse comma separated value and map with other table to get Name and change it back to comma separate.

Hi,
I have one existing view(with around 15 fields), in which I have to add few more fields from table called PI.
Now these fields have values like (55C4444F-D83B-4F96-A011-367A3755BA6C , F52388E2-485B-49DF-8534-FDF46D23F59E , 722432E1-F063-4CBD-B83D-1B97836E82953) 3 values comma separated.(Sometimes only one value and sometimes 4 or 5 or 7-8 depend on user has entered
on web page)
Also I have another table called PHA and this tables has 2 fields Values and Name so I have to map this two tables based on VALUES fields and get Name from this PHA table and show in view and that also Comma separated.
So basically I have to Parse the PI table's Values field 1st, map it with PHA table to get Name and then Make it comma separated in that existing view.
To make fields comma separate I used below query,
(SELECT DISTINCT SUBSTRING
SELECT ','+ PI.[Name] AS [text()]
FROM [DB].[dbo].[Table] PHA1
Inner Join [DB].[dbo].[Table] PI
ON PHA.[Value] = PI.[VALUE]
WHERE PHA1.PId =PHA2.PId and PHA1.CId = PHA2.CId
ORDER BY PHA1.PId
For XML PATH ('')
), 2, 1000)
FROM [DB].[dbo].[Table] PHA2
Inner Join [cSharpSite_profiles].[dbo].[PetAllergies] PA
Inner Join [DB].[dbo].[Table] PI
ON PHA.[Value] = PI.[VALUE]
) [Name]
Vicky

Wait, this sounds wrong. You have a view where you group values into a comma-separated list. While that surely will make some purists cringe, I can see that it makes sense from a presentation perspective.
But if you want to use these concatenated values as atomic values again, you should go back to the base tables and them from there. Building views on views may sometimes be a good idea, but if you are too keen on reuse you can cause a performance disaster.
So do it right from the beginning.
Erland Sommarskog, SQL Server MVP, [email protected]

Want to crate a bc set with transport request,which has deleted records

Hi
I need a help in BC sets regarding records deletion.
I want to create a BC sets with the transport, which has one deleted records from the table
I have 30 records in table. I have deleted one record and created transport for the same.
When I try to create BC sets with the above transport. It is not showing records, which is in Transport request.
Could you please help me on this How can we create BC sets with deleted records.
Thanks and Regards,
Venkat

Hai,
Please check the following link.....
http://help.sap.com/saphelp_nw70/helpdata/en/a6/c3a768465411d395c600a0c930dcc1/frameset.htm
Regards,
Yoganand.V

I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime. All of these devices are connected to itunes through the one account. How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime. All of these devices are connected to itunes through the one account. How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

I started to do that then it said that this will become their apple I.D or similar and then I thought that will disconnect them from the same iTunes? I want them still on my iTunes as they are only young (8 and 10)? Or have I got this all wrong and even if I do set them up with a different e-mail will they still be on my itunes? For example if they want to purchase an App will it still go through my account even if they use their ipod?

Issue with dynamic table which has RichCommandLink and RichSparkChart

Similar Messages

Maybe you are looking for