Issue with encoding while reading email msg from pst

I have a pst and I have issue with few messages which has russian characters in it, when i open the email it shows garbage values. But when i go to OtherActions->Encoding from the email menu option I see that the Encoding was set to "Cyrillic (KOI8-R)",
I have to change the Encoding to Unicode (UTF-8) inroder to read the email correctly. Also observed that this encoding is different for different emails from same pst.
Can I change the encoding to  Unicode (UTF-8) for reading the email message so that i dont get the issue for any email (I know there are options to set default encoding for sending emails but could not file an option for reading the email in a specific
encoding.)

Hi Srikanth,
Did someone get back to you on this?
Or did you already find a resolution on this. In that case can you please share?
Thanks,
Sudarshana

Similar Messages

  • Are there issues with DNG Converter reading CR2 files from Canon 5D Mark III?

    I am having problems similar to what's detailed at http://forums.adobe.com/message/4356184 (which unfortunately provides no explanation/solution) ... I choose the file where my CR2 RAW files are and try to convert but it tells me there are no files to convert. Only differences are I'm on Windows not a Mac, and I'm using Elements 9 not 10.

    Let's continue to use that same forum thread for this conversation.

  • Getting inner exception "dtd is prohibited in this xml document exchange" while reading emails from outlook

    Getting error "The response received from the service didn't contain valid XML." with inner exception "dtd is prohibited in this xml document exchange" while reading emails from outlook(Not while reading every mail).
    Can anybody please tell me what might be the issue. Below is the code where I am getting error
    FindItemsResults<Item> RetrievedItems=null ;
    RetrievedItems = service.FindItems(FIds, new ItemView(4));
    String[] SignatureList = ConfigurationManager.AppSettings.Get("SignatureTypes").Split(',');
    if (RetrievedItems != null && RetrievedItems.Count() > 0)
    RetrievedItems.ToList().ForEach(x =>
    try
    List<String> Attachments = new List<String>();
    List<String> ScanFileName = new List<String>();
    bool IsAvailable = true;
    //Getting error while Load() - below line of code
    ((Microsoft.Exchange.WebServices.Data.EmailMessage)x).Load();
    Vo.EmailMessage msg = new Vo.EmailMessage();
    msg.MessageId = ((Microsoft.Exchange.WebServices.Data.EmailMessage)x).Id.UniqueId;
    msg.From = ((Microsoft.Exchange.WebServices.Data.EmailMessage)x).From.Address;
    ((Microsoft.Exchange.WebServices.Data.EmailMessage)x).ToRecipients.ToList().ForEach(z => msg.To += z.Address + ",");
    ((Microsoft.Exchange.WebServices.Data.EmailMessage)x).ReplyTo.ToList().ForEach(y => msg.ReplyToEmailAddress += y.Address + ",");
    msg.Subject = ((Microsoft.Exchange.WebServices.Data.EmailMessage)x).Subject;
    msg.Body = ((Microsoft.Exchange.WebServices.Data.EmailMessage)x).Body.Text;
    msg.Dated = ((Microsoft.Exchange.WebServices.Data.EmailMessage)x).DateTimeSent;
    Please help.

    Hi,
    Thank you for your post.
    This is a quick note to let you know that we are performing research on this issue.
    Niko Cheng
    TechNet Community Support

  • Encoding problem while reading binary data from MQ-series

    Dear all,
    we are running on 7.0 and we have an encoding problem while reading binary data from MQ-series. Because we are getting flat strings from queue we use module "Plain2ML" (MessageTransformBean) for wrapping xml-elements around the incoming data.
    The MQ-Series-Server is using CCSID 850, which we configured in connection parameters in communication channel (both parameters for Queuemanager CCSID and also CCSID of target).If there are special characters in the message (which HEX-values differ from codepage to codepage) we get errors in our adapter while executing, please see stack-trace for further analysis below.
    It seems to us that
    1. method ByteToCharUTF8.convert() expects UTF-8 in binary data
    2. Both CCSID parameters are not used anyway in JMS-adapter
    How can we solve this problem without changing anything on MQ-site?
    Here is the stack-trace:
    Catching com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
        at com.sap.aii.af.modules.trans.MessageTransformBean.throwModuleException(MessageTransformBean.java:453)
        at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:387)
        at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
        at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292)
        at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
        at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:84)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.ConvertBinaryToXiMessageFilter.filter(ConvertBinaryToXiMessageFilter.java:304)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.ConvertJmsMessageToBinaryFilter.filter(ConvertJmsMessageToBinaryFilter.java:112)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:87)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:123)
        at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filter(TxManagerFilter.java:59)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.DynamicConfigurationFilter.filter(DynamicConfigurationFilter.java:72)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.PmiAgentFilter.filter(PmiAgentFilter.java:66)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.InboundCorrelationFilter.filter(InboundCorrelationFilter.java:60)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.JmsHeadersProfileFilter.filter(JmsHeadersProfileFilter.java:59)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageInvocationsFilter.filter(MessageInvocationsFilter.java:89)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.JarmMonitorFilter.filter(JarmMonitorFilter.java:57)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.filter.ThreadNamingFilter.filter(ThreadNamingFilter.java:62)
        at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
        at com.sap.aii.adapter.jms.core.channel.SenderChannelImpl.doReceive(SenderChannelImpl.java:263)
        at com.sap.aii.adapter.jms.core.channel.ChannelImpl.receive(ChannelImpl.java:437)
        at com.sap.aii.adapter.jms.core.connector.MessageListenerImpl.onMessage(MessageListenerImpl.java:36)
        at com.ibm.mq.jms.MQMessageConsumer$FacadeMessageListener.onMessage(MQMessageConsumer.java:399)
        at com.ibm.msg.client.jms.internal.JmsMessageConsumerImpl$JmsProviderMessageListener.onMessage(JmsMessageConsumerImpl.java:904)
        at com.ibm.msg.client.wmq.v6.jms.internal.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:4249)
        at com.ibm.msg.client.wmq.v6.jms.internal.SessionAsyncHelper.run(SessionAsyncHelper.java:537)
        at java.lang.Thread.run(Thread.java:770)
    Caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
        at com.sap.aii.messaging.adapter.Conversion.service(Conversion.java:714)
        at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:538)
        at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:528)
        at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:471)
        at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:364)
        ... 36 more
    Caused by: sun.io.MalformedInputException
        at sun.io.ByteToCharUTF8.convert(ByteToCharUTF8.java:270)
        at sun.nio.cs.StreamDecoder$ConverterSD.convertInto(StreamDecoder.java:287)
        at sun.nio.cs.StreamDecoder$ConverterSD.implRead(StreamDecoder.java:337)
        at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:223)
        at java.io.InputStreamReader.read(InputStreamReader.java:208)
        at java.io.BufferedReader.fill(BufferedReader.java:153)
        at java.io.BufferedReader.readLine(BufferedReader.java:316)
        at java.io.LineNumberReader.readLine(LineNumberReader.java:176)
        at com.sap.aii.messaging.adapter.Conversion.convertPlain2XML(Conversion.java:310)
        at com.sap.aii.messaging.adapter.Conversion.service(Conversion.java:709)
        ... 40 more
    Any ideas?
    Kind regards, Stefan

    Hi Stefan,
    for the first MTB now we are using only one parameter: Transform.ContentType = text/plain;charset="ISO-8859-1"
    The second MTB, which does the XML-Wrapping, is configured like this:
    Transform.Class = com.sap.aii.messaging.adapter.Conversion
    Transform.ContentType = application/xml
    xml.conversionType = SimplePlain2XML
    xml.fieldNames = value
    xml.fieldSeparator = §%zulu§%
    xml.processFieldNames = fromConfiguration
    xml.structureTitle = payload
    Both CCSID configuration parameters from the "Source"-Tab we've set to 850.
    Now, we don't get an error anymore - sun.io.malformedInputException - , but, unfortunately, now special character conversion succeeded (we need an "ß" and we get an ISO-HEX-E1 -> á).  E1 is (different from ISO) an "ß" in 850.
    Any ideas?

  • Is anyone else having issues with their mail , where the reply from the person you just contacted contains very old emails from a different contact ?

    Is anyone else having issues with their mail , where the reply from the person you just contacted contains very old emails from a different contact ?

    I mean that I sent an email to a contact of mine yesterday. His reply contained a stream of very old emails I had received in 2009 from a totally different contact all together !! The reply email was in my inbox as being from the original person I sent the email to. This is starting to happen more regularly now , so is a problem !

  • Issue with LCM while migrating planning application in the cluster Env.

    Hi,
    Having issues with LCM while migrating the planning application in the cluster Env. In LCM we get below error and the application is up and running. Please let me know if anyone else has faced the same issue before in cluster environment. We have done migration using LCM on the single server and it works fine. It just that the cluster environment is an issue.
    Error on Shared Service screen:
    Post execution failed for - WebPlugin.importArtifacts.doImport. Unable to connect to "ApplicationName", ensure that the application is up and running.
    Error on network:
    “java.net.SocketTimeoutException: Read timed out”
    ERROR - Zip error. The exception is -
    java.net.SocketException: Connection reset by peer: socket write error
    at java.net.SocketOutputStream.socketWrite0(Native Method)
    at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
    at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
    at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)

    Hi,
    First of all, if your environment for source and target are same then you will have all the users and groups in shared services, in that case you just have to provision the users for this new application so that your security will get migrated when you migrate the from the source application. If the environs are different, then you have to migrate the users and groups first and provision them before importing the security using LCM.
    Coming back to the process of importing the artifacts in the target application using LCM, you have to place the migrated file in the @admin native directory in Oracle/Middleware/epmsystem1.
    Open shared services console->File system and you will see the your file name under that.
    Select the file and you will see all your exported artifacts. Select all if you want to do complete migration to target.
    Follow the steps, select the target application to which you want to migrate and execute migration.
    Open the application and you will see all your artifacts migrated to the target.
    If you face any error during migration it will be seen in the migration report..
    Thanks,
    Sourabh

  • Problem  while reading XML file from Aplication server(Al11)

    Hi Experts
    I am facing a problem while  reading XML file from Aplication server  using open data set.
    OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
    IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      READ DATASET v_dsn INTO v_rec.
    WHILE sy-subrc <> 0.
      ENDWHILE.
      CLOSE DATASET v_dsn.
    The XML file contains the details from an IDOC number  ,  the expected output  is XML file giving  all the segments details in a single page and send the user in lotus note as an attachment, But in the  present  output  after opening the attachment  i am getting a single XML file  which contains most of the segments ,but in the bottom part it is giving  the below error .
    - <E1EDT13 SEGMENT="1">
      <QUALF>001</QUALF>
      <NTANF>20110803</NTANF>
      <NTANZ>080000</NTANZ>
      <NTEND>20110803<The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
    /SPAN></NTEND>
      <NTENZ>000000</NTENZ>
    for all the xml  its giving the error in bottom part ,  but once we open the source code and  if we saved  in system without changing anything the file giving the xml file without any error in that .
    could any one can help to solve this issue .

    Hi Oliver
    Thanx for your reply.
    see the latest output
    - <E1EDT13 SEGMENT="1">
      <QUALF>003</QUALF>
      <NTANF>20110803</NTANF>
      <NTANZ>080000</NTANZ>
      <NTEND>20110803</NTEND>
      <NTENZ>000000</NTENZ>
      <ISDD>00000000</ISDD>
      <ISDZ>000000</ISDZ>
      <IEDD>00000000</IEDD>
      <IEDZ>000000</IEDZ>
      </E1EDT13>
    - <E1EDT13 SEGMENT="1">
      <QUALF>001</QUALF>
      <NTANF>20110803</NTANF>
      <NTANZ>080000</NTANZ>
      <NTEND>20110803<The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
    /SPAN></NTEND>
      <NTENZ>000000</NTENZ>
    E1EDT13 with QUALF>003 and  <E1EDT13 SEGMENT="1">
    with   <QUALF>001 having almost same segment data . but  E1EDT13 with QUALF>003  is populating all segment data
    properly ,but E1EDT13 with QUALF>001  is giving in between.

  • An exception occurred while reading or writing from/to the IIS server

    Hi All,
    I am trying to install and configure calendar connectivity in EP6 sp9.
    As mentioned in
    http://help.sap.com/saphelp_nw04/helpdata/en/1d/3d59fdaa5ebb45967ea107d3fa117a/frameset.htm, i have installed MSX-A component and On testing MSX-A Component i am not getting any error.
    Also log file looks like this.
    BEGIN 3/8/2005 10:09:00 AM----
    URL: HTTP://10.10.18.213:8080/Calendar.asp
    URL Parameters: Server=10.10.18.205&Alias=[email protected]&Action=READ&StartDate=200503081007&EndDate=200503091007&Email=[email protected]&Debug=true
    Reponse: <?xml version='1.0' encoding='UTF-8' standalone='yes'?>
    <!DOCTYPE OUTPUT [<!ELEMENT OUTPUT (FAILURE|APPOINTMENTS)>
    <!ELEMENT FAILURE (ERRORNUMBER?, ERRORMESSAGE?, CLASSNAME?, METHODNAME?, LINENUMBER?, PARAMETERS?)>
    <!ELEMENT ERRORNUMBER (#PCDATA)>
    <!ELEMENT ERRORMESSAGE (#PCDATA)>
    <!ELEMENT CLASSNAME (#PCDATA)>
    <!ELEMENT METHODNAME (#PCDATA)>
    <!ELEMENT LINENUMBER (#PCDATA)>
    <!ELEMENT PARAMETERS (#PCDATA)>
    <!ELEMENT APPOINTMENTS (APPOINTMENT*)>
    <!ELEMENT APPOINTMENT (ID, SUBJECT?, LOCATION?, STARTDATE, ENDDATE, MEETINGTYPE, ALLDAY, RECURRING, BUSYSTATUS?)>
    <!ELEMENT ID (#PCDATA)>
    <!ELEMENT SUBJECT (#PCDATA)>
    <!ELEMENT LOCATION (#PCDATA)>
    <!ELEMENT STARTDATE (#PCDATA)>
    <!ELEMENT ENDDATE (#PCDATA)>
    <!ELEMENT MEETINGTYPE (#PCDATA)>
    <!ELEMENT ALLDAY (#PCDATA)>
    <!ELEMENT RECURRING (#PCDATA)>
    <!ELEMENT BUSYSTATUS (#PCDATA)>]><OUTPUT><APPOINTMENTS></APPOINTMENTS></OUTPUT>
    END 3/8/2005 10:09:00 AM----
    i have created calendar repository and exchange system on the portal and now i am getting this error in MyAppointment iView in <i>Content Provided by SAP</i>.
    <i><b>An exception occurred while reading or writing from/to the IIS server.</b></i>
    i would appreciate if you please help me urgently
    thanx and regards
    Santosh Choudhary

    Hi Akhilesh,
    I am able to browse HelloWorld.asp in same website. Also i am not getting any error while testing data retrieval through SAPPXchTest.exe, log file looks like this.
    <b>IIS Log File</b>
    IIS Log File
    #Software: Microsoft Internet Information Services 5.0
    #Version: 1.0
    #Date: 2005-03-18 04:44:58
    #Fields: date time c-ip cs-username s-ip s-port cs-method cs-uri-stem cs-uri-query sc-status cs(User-Agent)
    2005-03-18 04:44:58 10.10.18.213 - 10.10.18.213 8080 GET / - 401 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.0)
    2005-03-18 04:45:05 10.10.18.213 santoshc 10.10.18.213 8080 GET / - 200 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.0)
    <b>Application Log File</b>
    BEGIN 3/18/2005 10:18:31 AM----
    URL: HTTP://10.10.18.213:8080/Calendar.asp
    URL Parameters: Server=10.10.18.205&[email protected]&Action=READ&StartDate=200503161151&EndDate=200503171151&[email protected]&Debug=true
    Reponse: <?xml version='1.0' encoding='UTF-8' standalone='yes'?>
    <!DOCTYPE OUTPUT [<!ELEMENT OUTPUT (FAILURE|APPOINTMENTS)>
    <!ELEMENT FAILURE (ERRORNUMBER?, ERRORMESSAGE?, CLASSNAME?, METHODNAME?, LINENUMBER?, PARAMETERS?)>
    <!ELEMENT ERRORNUMBER (#PCDATA)>
    <!ELEMENT ERRORMESSAGE (#PCDATA)>
    <!ELEMENT CLASSNAME (#PCDATA)>
    <!ELEMENT METHODNAME (#PCDATA)>
    <!ELEMENT LINENUMBER (#PCDATA)>
    <!ELEMENT PARAMETERS (#PCDATA)>
    <!ELEMENT APPOINTMENTS (APPOINTMENT*)>
    <!ELEMENT APPOINTMENT (ID, SUBJECT?, LOCATION?, STARTDATE, ENDDATE, MEETINGTYPE, ALLDAY, RECURRING, BUSYSTATUS?)>
    <!ELEMENT ID (#PCDATA)>
    <!ELEMENT SUBJECT (#PCDATA)>
    <!ELEMENT LOCATION (#PCDATA)>
    <!ELEMENT STARTDATE (#PCDATA)>
    <!ELEMENT ENDDATE (#PCDATA)>
    <!ELEMENT MEETINGTYPE (#PCDATA)>
    <!ELEMENT ALLDAY (#PCDATA)>
    <!ELEMENT RECURRING (#PCDATA)>
    <!ELEMENT BUSYSTATUS (#PCDATA)>]><OUTPUT><APPOINTMENTS></APPOINTMENTS></OUTPUT>
    END 3/18/2005 10:18:31 AM----
    But when i am Testing it from the Portal i am getting this error.
    I have created Exchange Transport that whose configuration looks like this:
    System Alias : myExchange
    Domain : mydomain
    exchange server : 10.10.18.205
    IIS server : 10.10.18.213
    Port : 8080
    Protocol : Http
    Exchange is the Name of System and Alias name is myExchange.
    Hope this will help you to solve my problem.
    Thanks and regards,
    Santosh Choudhary<b></b><b></b>

  • How to read Email address from TO field

    Hi,
    I am try to read email from outlook using JACOB api. now i can able to read all email from outlook.
    my problem is while i am read TO field for Mail , its return the display name instead of email address.
    please any one tell me how to read email address from TO,CC and BCC field.
    Thanks in advance,
    With Regards,
    Ganesh Kumar.L

    Hi all,
    I am solved my problem,
    First i am getting the Recipients object from mail item object,
    and recipient object i can get all my required details.
    Thanks,
    by
    ganesh

  • I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

    I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
    ^^ that's the main problem. Here's the full history.
    I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
    Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    So, don't use youtube.
    http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
    http://www.youtubealternative.com/

  • Error while reading file entries from the database

    Hi there,
    We are running a instance of xmii 12 in a VM (VMware) and after somebody shutdown the host machine without shutting down the VM (great idea isn't it?) we keep getting this message when trying to access xMII:
    "Application cannot be started.
      Details:   com.sap.engine.services.deploy.container.ExceptionInfo: Error while reading file entries from the database."
    Any clue? Any suggestion on how we can recover from that?
    Thanks a whole lot,
    Dom
    Server log:
    #1.5 #000C29A3B1F20002000000C400000F2800044829A35270F8#1205243578005#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/tcmonitoringsysteminfo' application started successfully.#
    #1.5 #000C29A3B1F20002000000C500000F2800044829A3527A6C#1205243578005#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###application [] Start of application [sap.com/tcmonitoringsysteminfo] finished successfully on Web Container.#
    #1.5 #000C29A3B1F20002000000C600000F2800044829A3527DB5#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation startApp over application sap.com/tcmonitoringsysteminfo finished successfully on server 305221750#
    #1.5 #000C29A3B1F20002000000C700000F2800044829A3527E03#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation startApp on application sap.com/tcmonitoringsysteminfo finished on current cluster node for 221 ms.#
    #1.5 #000C29A3B1F20002000000C800000F2800044829A3528B49#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#com.sap.engine.services.deploy#Plain###Error occurred while initially starting application sap.com/xappsxmiiear:Error while reading file entries from the database.#
    #1.5 #000C29A3B1F20002000000CA00000F2800044829A352922B#1205243578015#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###The synchronization of applications with DB completed for 39304 ms.#
    #1.5 #000C29A3B1F200040000000200000F2800044829B290A4F8#1205243834341#/System/Server/SLDService##com.sap.sldserv.DataCollector####n/a##0da42150ef7311dcb908000c29a3b1f2#SAPEngine_System_Thread[impl:5]_7##0#0#Warning#1#com.sap.sldserv.DataCollector#Plain###Communication configuration is incomplete. No data transfer possible until corrected.#

    Well thanks for the hint. Actually, the DB was up but corrupted. I managed to solve the bug by re-deploying xMII (using the SDM tool) which kept all my data but redeployed both the config db of (x)mii and the class files.

  • A serious issue with excel file read in ODI

    hi gurus,
    Issue with excel file read is that we can read only one file by setting the path from ODBC Data Source Administrator-->System DNS -->Select Work book
    what i want to read the dynamic path(Every time I cant go back and set the Work book to select the excel file..
    So i came up with a solution to write a Vbscript that convert the excel to csv my problem got solved for dynamic paths the script is as follow:
    Set objArgs = WScript.Arguments
    For I = 0 to objArgs.Count - 1
    FullName = objArgs(I)
    FileName = Left(objArgs(I), InstrRev(objArgs(I), ".") )
    Set objExcel = CreateObject("Excel.application")
    set objExcelBook = objExcel.Workbooks.Open(FullName)
    objExcel.application.visible=false
    objExcel.application.displayalerts=false
    objExcelBook.SaveAs FileName & "csv",23
    objExcel.Application.Quit
    objExcel.Quit
    Set objExcel = Nothing
    set objExcelBook = Nothing
    Next
    Now this script convert the xls file to csv with comma seprated values
    e.g in excel sheet if data is ABC XYZ PQR
    csv will come with ABC,XYZ,PQR
    here the delimiter is , i want the delimiter as pipe | who's ascii code is 124
    but if i change 23 with 124 its not working i getting the error cannot save as...
    can anyone tell me that what should be the correct code for pipe
    so that the output is ABC|XYZ|PQR
    AS WE CAN USE THE SCRIPTS IN TOOLS
    Edited by: 789141 on Sep 14, 2010 11:33 PM

    I dont have the answer for your question but i have different approach in handling multiple Excel File.
    Step 1. Copy a sample source Excel File and Call it Final.xls .
    Step 2. Map this Final.xls to DSN and in Topology call this Final.xls
    Step 3. Do the Reversing and Map and test the Interface . Once its done.
    Step 4. Create a Package and using a http://odiexperts.com/?p=1426 get the list of all the Excel File
    Step 5 . Using this http://odiexperts.com/?p=273 create a Loop to Read the Excel File name
    Step 6 . Copy using OdiFileCopy to Final.xls and run your interface .
    Step 7. Increment the Loop and copy your next File for Final and run the interface
    Step 8 . Finally you will be able to read all the Excel File .
    Step 9 . Delete the source file [ Optional ]
    Hope this helps.

  • Raw Read Error Rate, Errors occurred while reading raw data from a disk

    hi
    when I turn my pavilion dv6 2170ee computer on screen shows below error.
    system diognostics (F2) does not any work
    and when my windows7 comming up this error was shown.
    I install Hard Disk Sentinel software and this program shows below:
    Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
    There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
    26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
    Replace hard disk immediately.
    how can I fix it?
    may drive format (Fdisk) and renewing windows can fix it?
    tanx and regards
    Mohammad

    Hello mohkhosh,
    I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
    After reviewing everything  you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
    HP Technical Support, North America 1-800-474-6836. For all other regions click here.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Hi am having issues with getting the list of users from the Active Director

    Hi am having issues with getting the list of users from the Active Directory, can anyone help me with this!

    Hi Jason,
    Try this:
    1.  In Ultiboard select Tools>>Netlist Editor>>Pins, press the Delete button
    2.  Select all nets in the Select the Net to Delete dialog and then press the Delete button.  This will clear all nets in the layout, don't worry all traces, parts are still on the design.
    3.  Go to Multisim and select Transfer>>Forward annotate to Ultiboard.    This will add all nets that you removed back and it should fix the pin problem
    Tien P.
    National Instruments

Maybe you are looking for