Issue with LCM while migrating planning application in the cluster Env.

Hi,
Having issues with LCM while migrating the planning application in the cluster Env. In LCM we get below error and the application is up and running. Please let me know if anyone else has faced the same issue before in cluster environment. We have done migration using LCM on the single server and it works fine. It just that the cluster environment is an issue.
Error on Shared Service screen:
Post execution failed for - WebPlugin.importArtifacts.doImport. Unable to connect to "ApplicationName", ensure that the application is up and running.
Error on network:
“java.net.SocketTimeoutException: Read timed out”
ERROR - Zip error. The exception is -
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)

Hi,
First of all, if your environment for source and target are same then you will have all the users and groups in shared services, in that case you just have to provision the users for this new application so that your security will get migrated when you migrate the from the source application. If the environs are different, then you have to migrate the users and groups first and provision them before importing the security using LCM.
Coming back to the process of importing the artifacts in the target application using LCM, you have to place the migrated file in the @admin native directory in Oracle/Middleware/epmsystem1.
Open shared services console->File system and you will see the your file name under that.
Select the file and you will see all your exported artifacts. Select all if you want to do complete migration to target.
Follow the steps, select the target application to which you want to migrate and execute migration.
Open the application and you will see all your artifacts migrated to the target.
If you face any error during migration it will be seen in the migration report..
Thanks,
Sourabh

Similar Messages

  • Issue with switching spaces via clicking application in the dock

    Hey guys,
    Sometimes, not all the time, when I click on an application in the dock that has windows open in another space, it switches to the appropriate space, but with the application I clicked on not in the foreground. If I have other application windows open in that space, sometimes they occupy the foreground, and subsequently, the application I have clicked on on the dock is not in view. It is highly annoying when I click on the dock icon, to find that I have to go down and click on the dock icon a second time to bring the app into view. Does this happen to anyone else?
    Cheers guys,
    Ric.

    Thanks KXsig.
    I've been upgrading from 10.5.8 to 10.6.4 last sunday. Since then, switching between different Spaces with Magic Mouse, i've got that issue of a third party application dedicated to Spaces number 6, and appearing also in background of Spaces 4 dedicated to Safari, or also in any free Spaces spot, when the application dedicated is not opened.
    That didn't happened with Leopard, thanks a lot for the keyboard shortcut "Command + Tab".
    Maybe a fix in 10.6.5 to come..

  • Issues with IFrame and calling an application outside the IFrame

    Hi
    I have an issue which is really turning my head 360 degrees in a "dead loop":)
    I have a WebDynpro application, one component and three views in a viewset.
    The first view will always be placed in column one and depending on some action the two other views should be loaded one by one. So in the main view the users will select three parameters from three dropdownboxes and then a call with the given parameters to an html file in KM - which then again is passing the parameters to a swf file which is presenting an Business Objects dashboard. The BO Dashboard is presented in an iFrame.
    The users selects an element in the Dashboard and is then again calling the webdynpro application with four parameters, the three first from the dropdownboxes, but also a new one which is used to call the third view. I am using NavigationTarget in the URL to load the application at the given position in the portal. And the logic is working, BUT the portal is presented in the IFram of the first View.
    So my question is - How to navigate from the IFrame and "back into the portal"????
    Regards
    Kay-Arne

    There was an issue with the serialization file created.
    Creating a new serilaization file via AAMEE and running it resolved the issue.
    Create a serialization file via AAMEE: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
    And then run it via command line.
    Here are the steps:
    AdobeSerialization (serialization file created using AAMEE 3.1) is not a double clickable file. You need to run it via command line to serialize the products. the command line is -
    AdobeSerialization --tool=VolumeSerialize --stream --provfile=”Absolute_Path_of_prov.xml”
    where
    --tool=VolumeSerialize:  specifies that the tool needs to process the prov.xml file to serialize.
    --provfile” specifies the absolute file path to the prov.xml file,
    By default, the tool looks for the prov.xml file in the same directory as the executable file and so
    typically you do not need to specify this option. (Specify this option only if the prov.xml file is in some
    other location.)
    Make sure you invoke command prompt with Admin privileges. Return code of zero means success.
    Tiffany can you please confirm the same?
    -Pragya

  • LCM import of Planning Application Hangs with "In Progress Status"

    Hi,
    LCM import of Planning Application Hangs with "In Progress Status" . its already couple of hours. Earlier it was always within 10 mins.
    Any advise is appreciated.
    Regards,
    Vineet

    It is probably worth trying again, may be useful to first bounce the services.
    If it happens again after bouncing the services then investigate at what staging it is getting stuck at.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Migrate planning application without migrating Provisioning information

    Hi,
    Is it possible to migrate just Planning application and other Hyperion objects without provisioning information. which we can assign as per new requirement.
    will it work or need to migrate provisioning information first then we can change later as per our requirement.
    This time MSAD Provider should connect with different host.
    Please advice.

    I understand that planning application contain provisioning information of Planning application in shared services and should be migrated along with Planning.
    My question was:
    Is it possible to migrate planning application only and then i should able to either re provisioning everything from scratch for migrated planning as we had bad experience with existing provisioning.
    though i have seen some option of update/delete in CSSImport (importexport.properties)
    please advice.

  • User issue with a report supply planning area today monthly

    this is a support issue....the user has an issue with a report supply planning area today monthly.  The user is getting wrong values in BW, it sums PLOs and POs under production (config).  for eg:  BW says we are producing 46T while in R/3 we have 4T.

    The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

  • Issues with JMS Server migration

    Hi All,
    I have issue with JMS server migration.
    I have configured clustred environment with 2 Managed server (MS1 & MS2) and with one JMS Server which is running on MS1 and configured for auto migration, when I start both my managed server once and access the application very functionality works fine and when I stop the MS1 the JMS server successfully geting migrated to MS2 and in this scenarion also my application works as expected and when I restart the MS1 and access the application all the functionalities related to MDBs are executed twice.
    However once we restart the MS1 we observe that in the monitor tab of MDB the connection status for both managed servers it show as connected.
    As a result there is a redundancy when the MDB is executed
    I am using Weblogic Server 10.3.0 & normal topics in the MDBs.
    Please let me know is this a bug or am I missing any configuration.

    Hi Suresh,
    There is a "Bug-10007947" in WLS 10.3.0 version which dose not displays the values properly on admin-console once the migration has taken place, however I am assuming that bug may fix your issue so try that out in your test environment. If that dose not work try out the below suggestions.
    Suggestion:
    - Try the same test on different versions of WLS lower as well as on higher versions compared to WLS 10.3.0 (i.e WLS 9.2.X and WLS 10.3.x) and check what are the result.
    - If in any other version your test runes properly, then you can create a simple test case and open a service request with Oracle asking for creating a BUG and let them do their job.
    Hope above information helped you.
    Regards,
    Ravish Mody

  • Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    So, don't use youtube.
    http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
    http://www.youtubealternative.com/

  • My magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.

    hi,
    my magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.
    Anyone facing the same issue? Thanks.

    Did you check System Preferences - Trackpad ? Also I'm not sure exactly what 3 fingered swipe are you referring to?

  • How to migrating planning applications version 9.2.0 to 11.1.1.3 directly

    Hi All
    Please help.
    Can be migrated Planning applications from version 9.2.0 to version 11.1.1.3 directly?
    There is documentation that explains the process?
    Attentive to your comments
    Regards
    Pedro
    Edited by: user13040806 on 06-feb-2013 5:48

    Hi Pedro,
    The quick way, assuming you are using Classic Planning Administration in 11.1.1.3 is to export the application schema and Essbase data & objects from the 9.2.0 environment and import into the new environment.
    Thanks,
    Andy

  • Error starting the Planning application, review the event log for details

    We are using the Hyperion Demo and there was a problem suddenly cropped up.
    While rebooting the system error is displayed saying - Atleast one of the driver is not installed.
    VMware is used to access the Hyperion Demo and when Planning application is started it gives the following error:
    Error starting the Planning application, review the event log for details
    We were using this Demo from some weeks and was able to access the workspace and others but from few days this issue is faced.
    Immediate response is highly appreciated as we are planning for a user demo in the weekend.
    Thanks,
    Ravi Kanth

    Hi Nofog / Goodwin,
    OLDAP is not running.
    Following errors are displayed:
    When VMWare is restarted: At least one service or driver failed during system startup. Use Event viewer to examine the Event log for details.
    OpenLDAP: Windows could not start the hyperion S9 OpenLDAP on Local Computer. For more information review the system even log. If this is not the microsoft service contact the service vendor, and refer to service specific code 21.
    Event log: The Hyperion S9 OpenLDAP service terminated with service - specific - erro 21 (0x15).
    Please let me know your email ids so that to send the screen shots.
    Thanks,
    Ravi

  • I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

    I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
    I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
    Thanks!

    Links should not create any problems in Keynote.  If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
    Try this repair for Keynote,  ensure you complete all the tasks and in the order shown:
    1 
    delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
    2 
    empty the trash:  Finder > Empty Trash
    3 
    Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
    When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
    If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
    4  
    Let the Mac fully boot up, it will take longer as the OS is repairing the drive
    5 
    when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions
    6 
    when complete, restart the Mac normally, Apple menu > Restart
    7 
    install Keynote from the Mac App Store
    let us know if this helped

  • Create Planning Application for the first time without using workspace

    hi,all:
    I come across a problem:The Hyperion Planning Application isn't configured into the workspace,but i have to create a Hyperion Planning Application for the first time.So, have any other methods to solve this problem? Can I use other tools or something to create it?
    thanks very much

    yellow wrote:
    Hi,John,Thanks for your quick reply.
    I think after install Hyperion Planning,at first time can't create application in this address:http://localhost:8300/HyperionPlanning/ ,usually create it in workspace.
    Is the address you said different from http://localhost:8300/HyperionPlanning/?
    thanksI gave you the address to create a planning application directly - http://localhost:8300/HyperionPlanning/AppWizard.jsp
    Notice the AppWizard.jsp on the end.
    If it version 11 you will be able to create your datasource from that location, if it is version 9 then you will have to create a datasource first from the configuration utility.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?

    My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?

    Apple is not here. Contact Apple to resolve your issue:
    iTunes Support WorldWide
    or
    iTunes Support by eMail ww
    Cheers,
    GB

  • We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform "niScope_CalSelfCalibrate(handle, "", 0);" function.

    We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform “niScope_CalSelfCalibrate(handle, "", 0);” function.
    But it made it worse. I tried using option 2 to restore but it did not work.
    Could you pls advice me to resolve this issue.

    Hi Ana10,
    Are you using this digitizer with NI VideoMaster? if not you should probably post this in the Digitizer forums. That said I would suggest using the self calibrate function in MAX for this device rather than the LabVIEW API method just so that you can rule out any errors in correctly configuring the digitizer for self cal in LabVIEW. Also you should ensure that all inputs are disconnected before performing a self cal. If this still results in an error in calibration you could refer to the following document or arrange to return the digitizer to NI for external calibration.
    http://www.ni.com/pdf/manuals/370328e.pdf
    Hope this helps,
    Nick

Maybe you are looking for