Issue with Engineer Multidimensional Model from Oracle Model

Here is the scenario:
1. Created logical star schema model including a dimension with nested subtypes (SuperTypeEntity1 -> Subtype 1 -> Nested Subtype 2)
2. Forward engineer to Relational model using Single Table implementation
3. Create Oracle 11g physical model definitions for the star
4. Define dimension, levels, and hierarchy in physiclal model
5. Create new multidimensional model, right click menu and execute "Engineer from Oracle Model"
Result:
Model and diagram built with correct dimension, levels, level attributes, hierarchy
Problem: The entity that the dimension levels are related to is the subtype entity that appears first alphabetically! What it should do is be related to the SuperTypeEntity since I used the Single Table implementation (IMO). I can manually change the property to pick the SuperType but then it loses the assignments for the Level Key and the Descriptive Attributes (which were defined in the physcial miodel) so I have to manually repopulate those properties.
Associated problem: Since I tend to do things incrementally (define a few dimensions at a time), everytime I re-run the engineering utility, it resets the dimension back to the wrong subtype everytime. (I like the fact that I can rebuild the multidimensional model iteratively to incorporate changes, but in this case it would be nice to "lock in" my manual changes).
My only work around at this point is to either only run the engineering utility once (which is pretty impractical) or temporarily prefix my super type entity with an "A" so it always comes up first in the list until I am done with all my iterations.

Hi Kent,
dimensional model is not well suited to use entity hierarchies.
I can manually change the property to pick the SuperType but then it loses the assignments for the Level Key and the Descriptive Attributes (which were defined in the physcial miodel) so I have to manually repopulate those properties.It seems all your key and descriptive attributes are in SuperTypeEntity1 (the root of hierarchy). How to proceed if some attributes (key +descriptive) are in subtypes, should SuperType be set as level entity again?
Philip

Similar Messages

Issues with Synchronize to and from DB (version 3.3.0.747)

Having an issue with syncing the model and the data dictionary is a very specific case:
1. Reverse engineer an existing table (T1)
2. Copy the table (in data modeler) - T2
3. Rename the table, make changes (add columns and keys)
4. Forward engineer the new table (i.e., export and run DD for T2L)
5. Make additional changes to new table (T2) in data model.
6. Run sync db with model - the sync routine compares my new table (t2) to the original table (T1) in the database! It cannot "find" my new table (T2) in the database to compare to.
7. Alternatively try to sync the model with the db - this time it wants to sync the original table (T1) to itself (which has no change) and DROP my new table (T2) from the model.
It appears that sync is looking at meta data one my new table (T2) that contains the original copied table's name (T1). And in fact if I look at the table Summary properties - the source db object property does list the original table name (T1).
I also tried to reverse engineer the new table (T2) to the merge with the model, that has the same behavior as the sync.
Is there a way to fix this short of dropping T1 from the schema?
Edited by: Kent Graziano on May 20, 2013 2:37 PM

Hi Kent,
thanks for reporting the problem. I logged a bug and ER for that.
Is there a way to fix this short of dropping T1 from the schema?Unnecessary information about source need to be cleared. Here is a script that will help on that:
//array with 2 elements to illustrate different use cases - the first is used to have exact match on table name
// the second one ("REGIO") can be used with following check in inList function
//if(table.getName().startsWith(list)){
var list = ["Regionsv1","REGIO"];
function isInList(table){
     for(var i=0;i<list.length;i++){
          // different approaches to match table name can be used
          // be aware of letter case
          //if(table.getName().startsWith(list[i])){
          if(table.getName().equalsIgnoreCase(list[i])){
               return true;
     return false;
function clearSourceStampforTable(table){
     clearSourceStamp(table);
     cols = table.getElements();
     for(var i=0;i<cols.length;i++){
          clearSourceStamp(cols[i]);
     keys = table.getKeySet().toArray();
     for(var i=0;i<keys.length;i++){
          clearSourceStamp(keys[i]);
          if(keys[i].isFK()){
               clearSourceStamp(keys[i].getFKIndexAssociation());
function clearSourceStamp(object){
     object.setSourceConnName("");
     object.setSourceObjSchema("");
     object.setSourceObjName("");
     object.setSourceDDLFile("");
     object.setDirty(true);
tables = model.getTableSet().toArray();
for(var i=0;i<tables.length;i++){
     table = tables[i];
     if(isInList(table)){
          clearSourceStampforTable(table);

Issue with Executing OS commands from Stored Procedure

I am trying to execute the scripts provided at :
http://github.com/xtender/XT_SHELL
provided by xtender user.
As required, I have asked my DBAs to grant privileges by executing the following scripts:
Begin
--change to needed permissions and execute
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/factiva/ODS/bin/CVIM_Rpt_ExportCSVFile’, 'read,write,execute' );
end;
/where CVIM_Rpt_ExportCSVFile is my script residing in the Unix server where my Oracle is installed.
The error I am facing when I try to execute the following command is:
select * from table(xt_shell.shell_exec('/var/scripts/CVIM_Rpt_ExportCSVFile',100))
Exception:the Permission (java.io.FilePermission /var/scripts/CVIM_Rpt_ExportCSVFile execute) has not been granted to ODS. The PL/SQL to grant this is dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )I have asked my DBA to also execute the following scripts: - But I still see the same error as above. I am not able to figure out whats going on. Can anyone pls help me out??
EXEC Dbms_Java.Grant_Permission('ODS', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
EXEC Dbms_Java.Grant_Permission(ODS', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )

DUPLICATE
===============================================================
Issue with Executing OS commands from Stored Procedure
==============================================================

Issue while executing OS script from Oracle

I am trying to execute the scripts provided at :
http://github.com/xtender/XT_SHELL
provided by xtender user.
As required, I have asked my DBAs to grant privileges by executing the following scripts:
Begin
--change to needed permissions and execute
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/factiva/ODS/bin/CVIM_Rpt_ExportCSVFile’, 'read,write,execute' );
end;
/where CVIM_Rpt_ExportCSVFile is my script residing in the Unix server where my Oracle is installed.
The error I am facing when I try to execute the following command is:
select * from table(xt_shell.shell_exec('/var/scripts/CVIM_Rpt_ExportCSVFile',100))
Exception:the Permission (java.io.FilePermission /var/scripts/CVIM_Rpt_ExportCSVFile execute) has not been granted to ODS. The PL/SQL to grant this is dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )I have asked my DBA to also execute the following scripts: - But I still see the same error as above. I am not able to figure out whats going on. Can anyone pls help me out??
EXEC Dbms_Java.Grant_Permission('ODS', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
EXEC Dbms_Java.Grant_Permission(ODS', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )

DUPLICATE
=============================================================
Issue with Executing OS commands from Stored Procedure
============================================================

Is there an issue with streaming videos direct from itunes? I

Is there an issue with streaming videos direct from itunes? I have good wifi but films just buffer , doesn't happen on flixster on netflix , wonder if there is any tweak to watch a film uninterrupted , because it is very frustrating? Thanks

Apple appears to be having trouble with the iTunes Store servers right now.
(81070)

External drive issue with late 2010 model 27" imac

I'm having trouble getting a Seagate Freeagent Go 2.5" 1TB to mount with the new 27" model imacs (11,3).
At first I thought that maybe it wasn't supplying enough power but after buying an external powered hub it still won't mount.
It must be something to do with the newest model since I have an early 2010 model imac which works fine with the drive.

Hello Brett!,
A rule i usually live by when purchasing externals, is to firstly check the file format (many are factory formatted in NTFS or FAT32) and if that is the case then change them to HFS+ using disk utility. That is of course if you intend to only use it with your mac, for example i use an external formatted in FAT32 and it works on Windows and Mac.
Secondly its a good code of practice to make sure the drive spins up, as that is the easiest way to check for a dodgy powersupply.
Thirdly and hopefully finally, if those tips don't work then try mounting it on another mac or pc and see if it is detected in any form, that'll tell you if there is a connection issue.
Regards,

Powershell : Issues with user input collection from Multiple InPutBox Form

I am having issues with getting user input to pass from a form that a user fills out into variables that I can then use in other methods and commands. (ex; SQL Query, SQL Data Add, ... )
I have attached the Powershell script I am using in it's designed form but I am having issues getting the DataCollection function to grab the content of the InputBox and send it to a variable for later use.
Note: I'm running this at this time from the ISE so I can actually see what is going on.
Any help would be appreciated.
DAS
[System.Reflection.Assembly]::LoadWithPartialName( “System.Windows.Forms”)
[System.Reflection.Assembly]::LoadWithPartialName( “Microsoft.VisualBasic”)
$FormDBA = New-Object System.Windows.Forms.Form
$FormDBA.Size = New-Object System.Drawing.Size(300,500)
$FormDBA.Text = "MIS Data"
$FormDBA.StartPosition = [System.Windows.Forms.FormStartPosition]::CenterScreen;
function DataCapture
$SubSID = $InBoxSID.text
ECHO $SubSID
$InBoxTxtSID = New-Object System.Windows.Forms.Label
$InBoxTxtSID.Location = New-Object System.Drawing.Size(25,15)
$InBoxTxtSID.Text = "Sticker ID : "
$InBoxSID = New-Object System.Windows.Forms.TextBox
$InBoxSID.Location = New-Object System.Drawing.Size(130,10)
$InBoxSID.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtUSR = New-Object System.Windows.Forms.Label
$InBoxTxtUSR.Location = New-Object System.Drawing.Size(25,55)
$InBoxTxtUSR.Text = "User Name ; "
$InBoxUSR = New-Object System.Windows.Forms.TextBox
$InBoxUSR.Location = New-Object System.Drawing.Size(130,50)
$InBoxUSR.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCN = New-Object System.Windows.Forms.Label
$InBoxTxtPCN.Location = New-Object System.Drawing.Size(25,95)
$InBoxTxtPCN.Text = "PC Name : "
$InBoxPCN = New-Object System.Windows.Forms.TextBox
$InBoxPCN.Location = New-Object System.Drawing.Size(130,90)
$InBoxPCN.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDPT = New-Object System.Windows.Forms.Label
$InBoxTxtDPT.Location = New-Object System.Drawing.Size(25,135)
$InBoxTxtDPT.Text = "Department : "
$InBoxDPT = New-Object System.Windows.Forms.TextBox
$InBoxDPT.Location = New-Object System.Drawing.Size(130,130)
$InBoxDPT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCT = New-Object System.Windows.Forms.Label
$InBoxTxtPCT.Location = New-Object System.Drawing.Size(25,175)
$InBoxTxtPCT.Text = "PC Type : "
$InBoxPCT = New-Object System.Windows.Forms.TextBox
$InBoxPCT.Location = New-Object System.Drawing.Size(130,170)
$InBoxPCT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMAK = New-Object System.Windows.Forms.Label
$InBoxTxtMAK.Location = New-Object System.Drawing.Size(25,215)
$InBoxTxtMAK.Text = "Make : "
$InBoxMAK = New-Object System.Windows.Forms.TextBox
$InBoxMAK.Location = New-Object System.Drawing.Size(130,210)
$InBoxMAK.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMOD = New-Object System.Windows.Forms.Label
$InBoxTxtMOD.Location = New-Object System.Drawing.Size(25,255)
$InBoxTxtMOD.Text = "Model : "
$InBoxMOD = New-Object System.Windows.Forms.TextBox
$InBoxMOD.Location = New-Object System.Drawing.Size(130,250)
$InBoxMOD.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtOPS = New-Object System.Windows.Forms.Label
$InBoxTxtOPS.Location = New-Object System.Drawing.Size(25,295)
$InBoxTxtOPS.Text = "O.S. : "
$InBoxOPS = New-Object System.Windows.Forms.TextBox
$InBoxOPS.Location = New-Object System.Drawing.Size(130,290)
$InBoxOPS.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDIS = New-Object System.Windows.Forms.Label
$InBoxTxtDIS.Location = New-Object System.Drawing.Size(25,335)
$InBoxTxtDIS.Text = "Disposed : "
$InBoxDIS = New-Object System.Windows.Forms.TextBox
$InBoxDIS.Location = New-Object System.Drawing.Size(130,330)
$InBoxDIS.Size = New-Object System.Drawing.Size(120,20)
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.Add_Click({DataCapture})
$FormDBA.Controls.Add($button)
$FormDBA.Controls.Add($InBoxTxtSID)
$FormDBA.Controls.Add($InBoxTxtUSR)
$FormDBA.Controls.Add($InBoxTxtPCN)
$FormDBA.Controls.Add($InBoxTxtDPT)
$FormDBA.Controls.Add($InBoxTxtPCT)
$FormDBA.Controls.Add($InBoxTxtMAK)
$FormDBA.Controls.Add($InBoxTxtMOD)
$FormDBA.Controls.Add($InBoxTxtOPS)
$FormDBA.Controls.Add($InBoxTxtDIS)
$FormDBA.Controls.Add($InBoxSID)
$FormDBA.Controls.Add($InBoxUSR)
$FormDBA.Controls.Add($InBoxPCN)
$FormDBA.Controls.Add($InBoxDPT)
$FormDBA.Controls.Add($InBoxPCT)
$FormDBA.Controls.Add($InBoxMAK)
$FormDBA.Controls.Add($InBoxMOD)
$FormDBA.Controls.Add($InBoxOPS)
$FormDBA.Controls.Add($InBoxDIS)
$FormDBA.ShowDialog()

Change this:
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.DialogResult='Ok' #<<<<<-------
#$button.Add_Click({DataCapture})
Remove function andrun like this:
if('Ok' -eq $FormDBA.ShowDialog()){
$FormDBA.Controls|%{$_.Text}
With names you can get values by control name.
¯\_(ツ)_/¯
This suggestion works for the purpose I needed.
If I could, I would attach the file instead of pasting the script so you can see what all I am using this to do.
But in short, we have a main form we use to pull records from a database and call up an application at the click of a button for remote assistance. However, we seem to now need the ability to have this application to edit and add new records into said
database. That's where this second form came in and also when I hit my issue with the information capture.
At this time I'm getting this to format the information collected so that I can start using using it with SQL commands.

Issue with MSSQL server connectivity from ODI 10.1.3

Hi,
In one of the interface we are populating data to target table in MSSQL server version 2005.
The physical topology connection results successful.
Since so long there is no problem and it is running successful. But suddenly I'm facing issues with this.
I cannot see teh datastores under the model created for this table. When expanding the model, when trying to reverse the model or when I am trying to save any changes in the package I am getting the below error.
java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 49.0)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.access$100(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
     at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
     at com.sunopsis.graphical.component.b.a.g.a(g.java)
     at com.sunopsis.graphical.component.b.a.g.a(g.java)
     at com.sunopsis.graphical.component.b.a.d.a(d.java)
     at com.sunopsis.graphical.component.b.h.e(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.a(h.java)
     at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame(SnpsSplitFrame.java)
     at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode(SnpsSplitFrame.java)
     at com.sunopsis.graphical.frame.bp.bN(bp.java)
     at com.sunopsis.graphical.frame.bp.bL(bp.java)
     at com.sunopsis.graphical.frame.a.is.bH(is.java)
     at com.sunopsis.graphical.frame.bo.r(bo.java)
     at com.sunopsis.graphical.frame.bo.bv(bo.java)
     at com.sunopsis.graphical.frame.bo.z(bo.java)
     at com.sunopsis.graphical.frame.bo.b(bo.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I have verified below:
The SQL server version is: MSSQL server 2005
the "sqljdbc.jar" file is there in place "<ORACLE_HOME>/oracledi/drivers"
Java version: jdk1.5.0
There is no change in source or target db. Please help me to fix this issue

Hi,
Thanks for the reply. The link is helpful and its the same what is there in the environment.
"The JDK version is 1.5 and JRE version is 1.4.2."
But, this was working fine till last week. I am worried, if the issue is due to version compatability why we were not facing this issue before. There is no changes in the environment since go live of this interface.
Thanks,

Issue with displaying Greek characters in Oracle 11.1

Hi,
We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
I believe that it is a issue with DB settings, although not sure of what is the setting.
Below is the result after running the query: select * from nls_database_parameters
NLS_LANGUAGE     AMERICAN
NLS_TERRITORY     AMERICA
NLS_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CHARACTERSET     AL32UTF8
NLS_CALENDAR     GREGORIAN
NLS_DATE_FORMAT     DD-MON-RR
NLS_DATE_LANGUAGE     AMERICAN
NLS_SORT     BINARY
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY     $
NLS_COMP     BINARY
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_RDBMS_VERSION     11.1.0.6.0
Please help.

869852 wrote:
Hi,
We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
I believe that it is a issue with DB settings, although not sure of what is the setting.
The first question that needs to be answered is whether the problem is a data storage problem or data presentation problem.
The query below will answer this question.
SELECT ASCIISTR(greek_column) from greek_table where key_id = <specific_value>;

Issue with Custom Form opening in Oracle apps

Hello,
I am not sure if this is correct place for this question.
Hi,
I have created a custom form and tested in forms 6i. I have moved the fmb and fmx files from my local machine to unix box and registered the form in oracle apps (11.5.10).
However, when I open the form from oracle apps, form opens OK but some of the field in form are blacked out-I am able to see the field but its black in color. When I type in field and highlight it with my mouse, the value I typed shows up.
What can be issue here?
I moved both fmb and fmx from my local machine to UNIX box.
Please help...

NV,
Have you resolved your issue? I've run into this before. I failed to subclass all of my objects properly from the APPSTAND.fmb in accordance with the [Oracle Applications Developers Guide | http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115devg.pdf]. If you have your items subclassed correctly, double check to make sure your Forms Builder is using the correct color pallet.
Hope this helps.
Craig...
If mine or someone elses response was helpful, please mark it accordingly

Issues with upgrading Hyperion HFM from 11.1.2 to 11.1.2.1

Hi,
After the recent release of Hyperion 11.1.2.1, we upgraded our development environment to 11.1.2.1 from 11.1.2.
Installation and configuration was smooth straight forward [ We used the Maintenance upgrade while installing 11.1.2.1 ].
We migrated the application created from 11.1.2 to 11.1.2.1 using copy App. We saw following issues.
1. We are unable to run consolidation and we get following Error: “An unknown error has occurred in the HsvData2 object”
2. Every time when we login to HFM workspace and run reports we see database authentication window, we have to enter admin credentials for first time.
3. We are unable to load a Rule File in 11.1.2.1, which was loaded successfully in 11.1.2.
Any details on the above issues or on the upgrade from 11.1.2 to 11.1.2.1 would be of great help.
Thanks and Regards,
Bhargav

I am going to throw out the most unexciting reply ever, but .... the answer probably lies in the 11.1.2.1 readme.
V25453-01 From : https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=13638318
Consolidation
When running a consolidation, the following error may occur: “An unknown error has occurred in the HsvData2 object” with a description of: “Value violated the integrity constraints for a column or table” and the following problem: “Cannot insert duplicate key in object”. To resolve this error, delete invalid records.
I didn't look at the other issues; however, once again, I think the answers are most likely contained in the readmes.
Charles

Issue with getting sequance number from db in EO for a primary key column

Hello Experts,
we are working on ADf 11.1.1.2.
we are facing issue with sequence number in our UAT instance.
dev instance and sit instances did not gave any issues.
We have one EO in that for one attribute we have given the value as
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
in order to get the primary key column value from db sequance .
<TransientExpression><![CDATA[(
new oracle.jbo.server.SequenceImpl("XXOZF_QA_CODE_S", object.getDBTransaction())).getSequenceNumber()
]]></TransientExpression>
now the issue is "I have incremented the sequence number through SQL plus from 10 to 20. And created a record on a VO which is based on above EO.
But the sequence iam getting is 11 instead of 21."
This is happening only in our uat instance all other instances are working fine.
Can any one tell us how this frame work is still pointing tho the old sequnce number.
regards
Gayaz

Also make sure that your sequence has NOCYCLE option.
some thing like this:
CREATE SEQUENCE test_seq
START WITH 1
INCREMENT BY 1
NOCACHE
NOCYCLE;

PHP email form - issue with who it's from

Hi,
I've got a referral page on my site where the user puts in their details and a friends details and the form fires off a email to the friend. The form is in HTML and posts it to a PHP file. The problem is I get in the email for who it's from:
from
"Scott Bradshaw"@server74.ukservers.net
I don't want the
@server74.ukservers.net
in their.
Is this an issue with PHP files and forms or is their a way round it? I know I could do a mailto: form but don't want to. What are my options?
Thanks, Scott

I'm making the website for someone and they had the hosting set up already but thanks for telling me. I think this is right what I've done:
function detectSuspect($val, &$ok) {
if (preg_match('/Content-Type:|Cc:|Bcc:/i', $val)) {
$ok = false;
$YourName = Trim(stripslashes($_POST['YourName']));
$YourEmail = Trim(stripslashes($_POST['YourEmail']));
$RefName = Trim(stripslashes($_POST['RefName']));
$RefEmail = Trim(stripslashes($_POST['RefEmail']));
$EmailFrom = $YourEmail;
$Subject = $RefName;
$EmailTo = $RefEmail;
// validation
$validationOK=true;
detectSuspect($YourName, $validationOK);
detectSuspect($YourEmail, $validationOK);
detectSuspect($RefName, $validationOK);
detectSuspect($RefEmail, $validationOK);
if (!$validationOK) {
print "<meta http-equiv=\"refresh\" content=\"0;URL=error.html\">";
exit;
// prepare email body text
$Body = "Hi $RefName,
$YourName thought you would be interested in viewing this online video called A
tale of 2 customers (< 3 mins).
www.easybench.org/ataleof2customers3";
$Body2 = "";
$Body2 .= "User Name: ";
$Body2 .= $YourName;
$Body2 .= "\n";
$Body2 .= "User Email: ";
$Body2 .= $YourEmail;
$Body2 .= "\n";
$Body2 .= "Referral Name: ";
$Body2 .= $RefName;
$Body2 .= "\n";
$Body2 .= "Referral Email: ";
$Body2 .= $RefEmail;
$Body2 .= "\n";
// send email
$success = mail($EmailTo, $Subject, $Body, "From: $EmailFrom<$EmailFrom>");
mail("[email protected]", "Referral details", $Body2, "From: [email protected]");
// redirect to success page
if ($success){
print "<meta http-equiv=\"refresh\" content=\"0;URL=thankyou2.html\">";
else{
print "<meta http-equiv=\"refresh\" content=\"0;URL=error.html\">";
?>
I've also got a feedback form thing too, the script above wouldn't work for it I guess as it's protecting against different thing but what's the best way to protect the feedback form? I've heard of a honeypot thing where create hidden form field.
Thanks, Scott

Issue with opening pdf file from web browser

I have Acrobat Pro ver 6 and Adobe Reader 9.1 on a computer. when my user tries to open up a pdf from the web he is getting the following error message:
"The Adobe Acrobat/Reader that is running can not be used to view PDF files in a WEb Browser. Adbe Acrobat/Reader version 8 or 9 is required. Please exit and try again."
What also happens is that Acrobat Pro ver 6 opens up and nothing is there.
I am not sure why he is getting that message since Reader 9.1 is installed.
Can any one shed some light on this for me.
This user needs to have Acrobat and Reader on his system. I understand that there are issues with having both.
Also he has it set up so that any PDF is opening using the Reader 9.1.
Thanks,

Your PC's default reader configuration for embedded PDFs has become confused, due to multiple Adobe PDF document solutions installed on one PC.
Solution 1:
Go to Start > Run
Type regedit and click OK.
Browse to the following key: HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe
Make sure that the correct Default data value is set for the path where Adobe Reader or Acrobat are installed.
The default installation values are:
"C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe"
or
"C:\Program Files\adobe\acrobat 6.0\acrobat\Acrobat.exe" (not sure about this path. Check on your PC to be sure)
depending on whether Adobe Reader or Adobe Acrobat is installed.
Solution 2:
Configure the browser to use Acrobat or Adobe Reader as a helper application.
If you are using Firefox to browse the web, you can change this setting in Firefox by going to:
Tools > Options
Click on the "Applications" Tab.
The first item in the list should be "Adobe Acrobat Document". Under the Action list, click the drop down arrow and select the application you want to read PDFs within the web browser. Click OK, and you should be done.
If you're using Internet Explorer to view PDFs, try the below steps.
After you configure Acrobat or Adobe Reader as a helper application, the browser starts the helper application in a separate window and displays PDF files within that window. Acrobat and Adobe Reader both include a preference that lets you specify Acrobat or Adobe Reader as the helper application.
To configure Acrobat or Adobe Reader as a helper application:
Start Acrobat or Adobe Reader.
Choose Edit > Preferences.
Select Internet on the left.
Deselect Display PDF In Browser Using [Acrobat application], and then click OK.
Quit Acrobat or Adobe Reader.
The next time you select a link to a PDF file in the browser, a dialog box asks what you would like to do with the file. If you select Open It, the browser opens the PDF file in Acrobat or Adobe Reader (the helper application); if you select Save It To Disk, the browser saves the PDF file to your hard drive.

Issue with opening PDF files from the web Acrobat 8.1.4

Hello everyone
I just found out about this problem today, and it manifests in such a manner that when you try to open a PDF document on the web, it hangs for a while, and then the standard message about Adobe Acrobat not being able to open the document comes up, and after you OK away that you get the message that the program shuts down.
If I download the PDF itself and open it locally it works. Is there any known issue with updates recently that creates this problem?
The system is running on Windows 7 32-bits, and Adobe Acrobat is a part of the CS3 Master Collection.
Greetings from Alexander

Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
Might have been damaged is pretty cut and dried in its meaning and interpretation.
There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

Issue with Engineer Multidimensional Model from Oracle Model

Similar Messages

Maybe you are looking for