Issue with execution of J1INCERT

Dear All,
I have executed-J1INCHLN - Create Remittance Challan & the challan is updated.
Then executed -J1INBANK - Enter Bank Challan & the challan is also updated.
While executing J1INCERT - Print the system displays list contains no data.Where i did mistake i am not able to idetify.
Please suggest.
Rgds,
Durga.

Hi... as per your issue
First note: Check the master data tds rates were maintained or not . and the new rates were updated in all the vendor master data or not
In EWT a field called business place is playing major roll. Please check that all the transactions should have business place. if some transactions do not have business place than it will not consider for challan posting.
1. Post invoice with TDS (importantly update the business place and section code)
2. Run J1INCHLN for monthly remittance to Govt.
3. Update J1INBANK for back challan updatation
Note : checked the table with_item and the bseg,bkpf tables.basically the j1incert picks/parses data from the with_item table(the program fetches all the data from bkpf and checks with with_item table and does some filtering and its shown in the certificate print)
4. Run J1INCERT to print the TDS Certificates
Note: Finally just look into your J1INCERT entering parameters screen, the problem lies in the paramaters most probably in dates only assuming all the required configuration has been correctly done
Also Please change the assigned form J_1IEWT_CERT to J_1IEWT_CERT_N
I hope it will helps you...please confirm
Regards
vamsi

Similar Messages

Issue with execution of report

Hi,
I have an issue when the report is running. It is taking long time to run.
The scenario is that We used Plant in selection screen initially and there were no issues in execution of the report.
As per the business process, the plant has to be replaced with another info object zobject_0plant. Zobject is a customized infoobject and 0plant is the navigational attribute of zobject.
The report is running good without the selection of Zobject_0plant.
When this zobject_0plant is selected in variable screen, the report is taking long time to execute.
Please help me to resolve this issue.
Thanks in advance.

Hi... as per your issue
First note: Check the master data tds rates were maintained or not . and the new rates were updated in all the vendor master data or not
In EWT a field called business place is playing major roll. Please check that all the transactions should have business place. if some transactions do not have business place than it will not consider for challan posting.
1. Post invoice with TDS (importantly update the business place and section code)
2. Run J1INCHLN for monthly remittance to Govt.
3. Update J1INBANK for back challan updatation
Note : checked the table with_item and the bseg,bkpf tables.basically the j1incert picks/parses data from the with_item table(the program fetches all the data from bkpf and checks with with_item table and does some filtering and its shown in the certificate print)
4. Run J1INCERT to print the TDS Certificates
Note: Finally just look into your J1INCERT entering parameters screen, the problem lies in the paramaters most probably in dates only assuming all the required configuration has been correctly done
Also Please change the assigned form J_1IEWT_CERT to J_1IEWT_CERT_N
I hope it will helps you...please confirm
Regards
vamsi

Issue with execution of MessageChoicebean View Object at every row of table

I have a table with 2 columns.
First column is showing datatype.
Second column is MesssageChoiceBean which is showing values from the VO.
This choiceBean VO , i am executing based on the first column data type.
Here the issue is,
The data type at the last row of the table is executing the corresponsing choice bean VO and that is replacing all the above rows choice bean values.
Please help me in this.

1. When i run the model layer, open the operations of the "SecondEmpDetailsView" and perform filter, it is getting applied to "FirstEmpDetailsView" instead of "SecondEmpDetailsView"VO instances are defined in your AM (AM act as service facade for you). If you want to manipulate a specific VO instance, please move this logic to AM, get hold of specific VO instance and apply the criteria.

Execution time issues with SU01 demo script

Having worked with Scripting in a Box for a while now I wanted to try out the examples there. I read FM: SO_USER_LIST_READ or another one explaining why my attempt to narrow the returned users failed (Craig, did you find out why the functionality was removed?) and Re: Issue with "Scripting in a Box" seeing that Harry had the same problems with only ~200 users in his system. However, Craig's original post states he successfully managed with over 400 users. I'm a bit confused...
I included some simple timing stuff and found out that processing of one user in the loop takes about 1.7 seconds - little surprise then that every script times out. This seems to be due to the additional calls to GetStatus() and GetValid() - by commenting them out I get the whole list rather quickly.
Unfortunately commenting them out also means no nice icons for 'Status' and 'Valid', which is not desired. I probably could create a Z FM to deliver me the userlist with these two fields already added (which would save on rfc-calls, assuming the operation is much quicker on the server directly), but I hoped to get a solution based purely on PHP, not own ABAP coding (being aware that Craig also used a Z FM anyway, but still...)
I'm a bit unsure now how easy it is to actually create useful frontends in PHP, with such long execution times. I assume this will happen in other occasions as well, not only for user lists. Is there an alternative? Or a general way to do those things quicker?
:Frederic:

Craig: you say it's easy to go from 1.7 seconds per user lookup down to a small fraction of it? Then apparently I'm lacking these skills. Could you please give me a hint what should be done there?
I though about creating a Z function, but having to write custom wrappers - possibly for about any transaction in this style - I wanted to avoid.
Bala: the two functions only take one user as input, not a list. So w/o modifying the ABAP side I can't feed the whole list in there. I wonder how much it would improve the result time anyway, so perhaps I'm trying it. It's just not a solution I'd prefer.
Paging is a good idea, the actual call to get the whole userlist is quite quick. Having like 20 users displayed at a time is manageable - still slow, but the script won't timeout anymore. I think I'll implement this today.
About AJAX: yes, I want to play around a bit with AJAX, however having the two columns valid and status removed and the information only displayed on mouseover etc is a bit like cheating. And 1.7+ seconds waiting for a hoover info is too long. So I'd like to optimize on the rfc-calling side primarily.
Craig: surely it was just a demo, and I'm just trying to get it to work for understanding it
:Frederic:

SAP GUI Compatibility issue with Windows 2008R2 64 Bit

Hi Gurus
Is anyone experienced connectivity issue with SAP GUI (32bit) on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
Your inputs greatly appreciated.
-giri

Hi Giri
Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
Refer the SAP Note 66971 - Supported SAP GUI platforms
BR
SS

Error An unexpected error has occurred. Troubleshoot issues with Microsoft SharePoint Foundation. Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb

Hi,
Since I installed a few updates, that I can't access the sharepoint the same way. I always get errors when trying to access the majority of the pages.
I already removed the update suggested on other threads (KB2844286), but everything remains the same.
I always receive errors like this one:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb
what can I do? The Sharepoint 2010 is located on a virtual partition of our server, running Windows Server 2008 Standard edition SP1.
When I try to access administration tools it happens the same error, and I don't know what I can do more.
Please help me.
best regards,
Jorge Guimarães

I followed some tips, to trace the error, allowing some trace debug, and got this:
Server Error in '/' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() +134
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() +44
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) +329
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() +44
Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() +60
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() +15
Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +65
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2427
Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5479

Som issues with Nvidia GTX960 - dmesg error output posted

I have some issues with icons not showing up, eg. in pamac. Just red crosses or what it's called.
Here is my dmesg error output.
$ dmesg --level=err,warn
[ 0.000000] ACPI: RSDP 0x00000000DD7F6000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD7F6080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD8041A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DD7F6198 00E009 (v02 ALASKA A M I 00000031 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DDD45080 000040
[ 0.000000] ACPI: APIC 0x00000000DD8042B8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD804350 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000DD804398 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD8043F8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD804938 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: MCFG 0x00000000DD805410 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DD805450 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD805488 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD8057F8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000DD808D38 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.006274] ACPI: All ACPI Tables successfully acquired
[ 0.014978] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014978] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.016204] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.102300] #2 #3 #4 #5 #6 #7
[ 0.263542] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.265355] ACPI: Dynamic OEM Table Load:
[ 0.265358] ACPI: SSDT 0xFFFF8807FA42A800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.265733] ACPI: Dynamic OEM Table Load:
[ 0.265736] ACPI: SSDT 0xFFFF8807FA419800 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.266134] ACPI: Dynamic OEM Table Load:
[ 0.266135] ACPI: SSDT 0xFFFF8807FA46DA00 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.267060] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.267063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.285136] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.793801] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794140] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794388] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.794391] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.795480] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.795482] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 1.018384] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.018386] usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.040606] systemd-journald[181]: Failed to set file attributes: Inappropriate ioctl for device
[ 1.114596] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 1.230333] nvidia: module license 'NVIDIA' taints kernel.
[ 1.230335] Disabling lock debugging due to kernel taint
[ 1.235547] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015
[ 2.072087] NVRM: Your system is not currently configured to drive a VGA console
[ 2.072090] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 2.072091] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 2.072091] NVRM: drivers including, but not limited to, vesafb, may result in
[ 2.072092] NVRM: corruption and stability problems, and is not supported.
My hardware is a desktop with i7 4790K (4 cores with HT enabled) ASUS Z87-K motherboard, 32 GB Corsair 1600 MHz RAM. Samsung 850 PRO 1 TB SSD.
My inxi -F
System: Host: archie Kernel: 4.0.5-1-ARCH x86_64 (64 bit) Desktop: Xfce 4.12.2 Distro: Arch Linux
Machine: System: ASUS product: All Series
Mobo: ASUSTeK model: Z87-K v: Rev X.0x serial: 130612439103584
Bios: American Megatrends v: 1402 date: 11/05/2014
CPU: Quad core Intel Core i7-4790K (-HT-MCP-) cache: 8192 KB
clock speeds: max: 4400 MHz 1: 4000 MHz 2: 4002 MHz 3: 4000 MHz 4: 4000 MHz 5: 4256 MHz
6: 4001 MHz 7: 4002 MHz 8: 4002 MHz
Graphics: Card: NVIDIA GM206 [GeForce GTX 960]
Display Server: X.org 1.17.2 driver: nvidia tty size: 108x41 Advanced Data: N/A for root
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel
Card-2 NVIDIA Device 0fba driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.0.5-1-ARCH
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <masked>
Drives: HDD Total Size: 1024.2GB (4.4% used) ID-1: /dev/sda model: Samsung_SSD_850 size: 1024.2GB
Partition: ID-1: / size: 48G used: 13G (27%) fs: ext4 dev: /dev/sda3
ID-2: /home size: 769G used: 154M (1%) fs: ext4 dev: /dev/sda4
ID-3: /boot size: 511M used: 25M (5%) fs: vfat dev: /dev/sda1
ID-4: swap-1 size: 33.55GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 172 Uptime: 10 min Memory: 1133.0/32119.5MB Client: Shell (sudo) inxi: 2.2.25
Have I missed something to post?
Last edited by dockland (2015-06-17 20:30:48)

I read that this line in my case
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
is a bug and unfixable.
What does that mean and why is it "unfixable"? Is that some hardware that is not compatible with Arch at all?

Performance issues with the Tuxedo MQ Adapter

We are experimenting some performance issues with the MQ Adapter. For example, we are seeing that the MQ Adapter takes from 10 to 100 ms in reading a single message from the queue and sending to the Tuxedo service. The Tuxedo service takes 80 ms in its execution so there is a considerable waste of time in the MQ adapter that we cannot explain.
Also, we have looked a lot of rollback transactions on the MQ adapter, for example we got 980 rollback transactions for 15736 transactions sent and only the MQ adapter is involved in the rollback. However, the operations are executed properly. The error we got is
135027.122.hqtux101!MQI_QMTESX01.7636.1.0: gtrid x0 x4ec1491f x25b59: LIBTUX_CAT:376: ERROR: tpabort: xa_rollback returned XA_RBROLLBACK.
I am looking for information at Oracle site, but I have not found nothing. Could you or someone from your team help me?

Hi Todd,
We have 6 MQI adapters reading from 5 different queues, but in this case we are writing in only one queue.
Someone from Oracle told us that the XA_RBROLLBACK occurs because we have 6 MQ adapters that are reading from the same queues and when one adapter finds a message and try to get that message, it can occurs that other MQ Adapter gets it before. In this case, the MQ adapter rollbacks the transaction. Even when we got some XA_RBROLLBACK errors, we don´t lose message. Also, I read something about that when XA sends a xa_end call to MQ adapter, it actually does the rollback, so when the MQ adapter receives the xa_rollback call, it answers with XA_RBROLLBACK. Is that true?
However, I am more worried about the performance. We are putting a request message in a MQ queue and waiting for the reply. In some cases, it takes 150ms and in other cases it takes much more longer (more than 400ms). The average is 300ms. MQ adapter calls a service (txgralms0) which lasts 110ms in average.
This is our configuration:
"MQI_QMTESX01" SRVGRP="g03000" SRVID=3000
CLOPT="-- -C /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg"
RQPERM=0600 REPLYQ=N RPPERM=0600 MIN=6 MAX=6 CONV=N
SYSTEM_ACCESS=FASTPATH
MAXGEN=1 GRACE=86400 RESTART=N
MINDISPATCHTHREADS=0 MAXDISPATCHTHREADS=1 THREADSTACKSIZE=0
SICACHEENTRIESMAX="500"
/tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg:
*SERVER
MINMSGLEVEL=0
MAXMSGLEVEL=0
DEFMAXMSGLEN=4096
TPESVCFAILDATA=Y
*QUEUE_MANAGER
LQMID=QMTESX01
NAME=QMTESX01
*SERVICE
NAME=txgralms0
FORMAT=MQSTR
TRAN=N
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCRQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCPQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPSAQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPINQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KDECQ01
Thanks in advance,
Marling

Issue with LCM while migrating planning application in the cluster Env.

Hi,
Having issues with LCM while migrating the planning application in the cluster Env. In LCM we get below error and the application is up and running. Please let me know if anyone else has faced the same issue before in cluster environment. We have done migration using LCM on the single server and it works fine. It just that the cluster environment is an issue.
Error on Shared Service screen:
Post execution failed for - WebPlugin.importArtifacts.doImport. Unable to connect to "ApplicationName", ensure that the application is up and running.
Error on network:
“java.net.SocketTimeoutException: Read timed out”
ERROR - Zip error. The exception is -
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)

Hi,
First of all, if your environment for source and target are same then you will have all the users and groups in shared services, in that case you just have to provision the users for this new application so that your security will get migrated when you migrate the from the source application. If the environs are different, then you have to migrate the users and groups first and provision them before importing the security using LCM.
Coming back to the process of importing the artifacts in the target application using LCM, you have to place the migrated file in the @admin native directory in Oracle/Middleware/epmsystem1.
Open shared services console->File system and you will see the your file name under that.
Select the file and you will see all your exported artifacts. Select all if you want to do complete migration to target.
Follow the steps, select the target application to which you want to migrate and execute migration.
Open the application and you will see all your artifacts migrated to the target.
If you face any error during migration it will be seen in the migration report..
Thanks,
Sourabh

Issue with Insert in SP

Gurus,
I have an issue with inserting rows into temp table through SP.
Here is my proc. its running fine. After the execution completed when i try to select the rows from srini_temp table its showing 0 rows. Whats wrong here.
CREATE PROCEDURE BO_HR_RPT.SRINI_TEST AS
BEGIN
insert into BO_HR_RPT.srini_temp (
COURSE_TITLE,
COURSE_ID,
CLASS_NO,
DELIVERY_METHOD,
LEARNER_OWN,
DURATION,
score,
VENDOR,
START_DATE,
END_DATE,
INSTRUCTOR_NAME,
TRANS_STATUS,
LEARNER_NAME,
LEARNER_EMP_TYPE,
INSTRUCTOR_OWN,
INSTRUCTOR_EMP_TYPE,
EFFT_PERIOD,
YEAR,
AS_OF_DATE,
LMS_SOURCE,
REPORT_CATEGORY)
SELECT COURSE_TITLE,
COURSE_ID,
CLASS_NO,
CASE WHEN COURSE_ID LIKE 'TIS%' OR COURSE_ID LIKE 'TIWEB%' OR COURSE_ID LIKE 'TIVLAB%' OR COURSE_ID LIKE 'TIWVT%'
OR COURSE_ID LIKE 'STARELT%' OR COURSE_ID LIKE 'TIELT%' OR DELIVERY_METHOD ='Web Based Training'
OR DELIVERY_METHOD = 'e-Learning or via backend Import' THEN 'E-Learning'
WHEN DELIVERY_METHOD = 'IDL' THEN 'IDL'
WHEN DELIVERY_METHOD = 'IDL Replay' THEN 'Replay'
ELSE INITCAP(DELIVERY_METHOD) END AS DELIVERY_METHOD,
RTRIM(LEARNER_OWN) as LEARNER_OWN,
CASE WHEN LMS_SOURCE ='SABA' THEN ROUND(DURATION/60,1)
ELSE DURATION END AS DURATION,
CASE WHEN SCORE='0' then '' else score END as score,
CASE WHEN (vendor_name IS NOT NULL) AND (UPPER(SUBSTR(COURSE_ID,1,2)) = 'TV') then vendor_name
WHEN COURSE_ID LIKE 'TIWEB%' then 'SKILLSOFT'
WHEN COURSE_ID LIKE 'TIVLAB%' then 'ELEMENTK'
ELSE 'N' END AS VENDOR,
START_DATE,
END_DATE,
INITCAP(INSTRUCTOR_NAME) AS INSTRUCTOR_NAME,
TRANS_STATUS,
INITCAP(LEARNER_NAME) AS LEARNER_NAME,
INITCAP(LEARNER_EMP_TYPE) AS LEARNER_EMP_TYPE,
RTRIM(INSTRUCTOR_OWN),
INITCAP(INSTRUCTOR_EMP_TYPE) AS INSTRUCTOR_EMP_TYPE,
trim(initcap(TO_CHAR(TRUNC(NVL(END_DATE,START_DATE)),'MONTH'))) AS EFFT_PERIOD,
TO_CHAR(TRUNC(NVL(END_DATE,START_DATE)),'YYYY') AS YEAR,
TRUNC(ADD_MONTHS(LAST_DAY(load_date) ,-1)) AS AS_OF_DATE,
LMS_SOURCE,
REPORT_CATEGORY
FROM BO_HR_RPT.ELM_GLD_MASTER_BASE
where ROWNUM <= 10
ORDER BY COURSE_ID,CLASS_NO,START_DATE,END_DATE,INSTRUCTOR_NAME;
COMMIT;
END;
Thanks for great help.
Srini

Are you completely sure this isn't a global temporary table?
it really would explain your problems!
Have you got access to run a
select tablename from all_tables where TEMPORARY = 'Y'[pre]

Performance Issue with BSIS(open accounting items)

Hey All,
      I am having serious performance issue with a accrual report which gets all open GL items, and need some tips for optimization.
The main issue is that I am accesing large tables like BSIS, BSEG, BSAS etc without proper indexes and that I am dealing with huge amounts of data.
The select itself take a long time and after that as I have so much data overall execution is slow too.
The select which concerns me the most is:
SELECT zuonr hkont gjahr belnr buzei budat blart wrbtr shkzg xblnr waers bukrs
             INTO TABLE i_bsis
              FROM bsis
              WHERE bukrs = '1000'
              AND hkont in r_hkont
              AND budat <= p_lcdate
              AND augdt = 0
              AND augbl = space
              AND gsber = c_ZRL1
              AND gjahr BETWEEN l_gjahr2 AND l_gjahr
              AND ( blart = c_re      "Invoice
              OR    blart = c_we      "Goods receipt
              OR    blart = c_zc      "Invoice Cancels
              OR    blart = c_kp ).   "Accounting offset
I have seen other related threads, but was not that helpful.
We already have a secondary index on bukrs hkont and budat, and i have checked in ST05 that it does use it. But inspite that it takes more than 15 hrs to complete(maybe because of huge data).
Any Input is highly appreciated.
Thanks

Thank you Thomas for your inputs:
You said that R_HKONT contains several ranges of account numbers. If these ranges cover a significant
portion of the overall existing account numbers, then there is no really quick access possible via the
BSIS primary key.
Unfortunately R_HKONT contains all account numbers.
As Rob said, your index on HKONT and BUDAT does not help much, since you are selecting "<=" on
BUDAT. No chance of narrowing down that range?
Will look into this.
What about GSBER? Does the value in c_ZRL1 provide a rather small subset of the overall values? Then
an index on BUKRS and GSBER might be helpful.
ZRL1 does provide a decent selection . But I dont know if one more index is a good idea on overall
system performance.
I assume that the four document types are not very selective, so it probably does not pay off to
investigate selecting on BKPF (there is an index involving BLART) and joining BSIS for the additional
information. You still might want to look into it though.
I did try to investigate this option too. Based on other threads related to BSIS and Robs Suggestion in
those threads I tried this:
SELECT bukrs belnr gjahr blart budat
FROM bkpf INTO TABLE bkpf_l
        WHERE bukrs = c_pepsico
        AND bstat IN (' ', 'A', 'B', 'D', 'M', 'S', 'V', 'W', 'Z')
        AND blart IN ('RE', 'WE', 'ZC', 'KP')
        AND gjahr BETWEEN l_gjahr2 AND l_gjahr
        AND budat <= p_lcdate.
SELECT zuonr hkont gjahr belnr buzei budat blart wrbtr shkzg xblnr waers bukrs
           FROM bsis INTO TABLE i_bsis FOR ALL ENTRIES IN bkpf_l
                     WHERE bukrs = bkpf_l-bukrs
                      AND hkont IN r_hkont
                      AND budat = bkpf_l-budat
                      AND augdt = 0
                      AND augbl = space
                      AND gjahr = bkpf_l-gjahr
                      AND belnr = bkpf_l-belnr
                      AND blart = bkpf_l-blart
                      AND gsber = c_zrl1.
The improves the select on BSIS a lot, but the first select on BKPF kills it. Not sure if this would help
improve performance.
Also I was wondering whether it helps on refreshing the tabe statistics through DB20. The last refresh
was done 7 months back. How frequently should we do this? Will it help?

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Issue with report RBDMIDOC

Hi Gurus,
I have an issue with the report RBDMIDOC. When I run it to the message type MATMAS, it takes 8 or 9 seconds to send the IDoc. With the message type CLFMAS takes 3 seconds.
The duration of the execution of this report depends only of the access to the BDCP and BDCPS tables or is there any other factor that has influence on this time?
The BDCPS table has 300000 entries, and is well indexed.
What could I do to reduce this time?
Thanks and regards,
Manuel Míguez.

[Duplicate Post|Issue with Report RBDMIDOC;

2008 R2: OS(systemState/C: Drive) backup issues with VSS - 0x80042316 & 0x81080101 & 0x80080005 & 2155348001

Hi-
Looked thru the thread related to my questions and found nothing that applies yet.
Example:
http://social.technet.microsoft.com/Forums/en-US/4e4472b9-8e6f-4fdc-a287-1cc8c0f6de09/windows-2008-r2-backup-fails-with-event-521-error-code-2155348001?forum=windowsbackup
http://social.technet.microsoft.com/Forums/en-US/e8c910f7-f0dd-4613-beae-b98894fb6f23/windows-server-2008-std-backup-fails-constantly-with-error-code-2155348001?forum=windowsbackup
Here are details of the issues....
Backup - OS error - system image:
External disk - USB
Mon - Fri @ 6PM.
Windows SystemState
OS(C:)
Last backup failure...
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
[Critical error WINIMAGE_UNABLE_VSS] Unable to create VSS snapshot
- Additional information: Refer to the log for more details
- Troubleshooting link:
http://kb.backupassist.com/errormap.php?BA2512
The backup operation stopped before completing.
Detailed error: ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-12-08-2014_04-41-00.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-12-08-2014_04-41-00.log
NOTE:
The errors logs are not there?
Windows Backup timed-out before the shared protection point was created.
ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Event Viewer Log:
Sequence of Events...
1.
The Block Level Backup Engine service has successfully started.
2.
Backup operation that started...
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          8/12/2014 4:51:06 AM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      mdnfile.Auxiant.local
Description:
The backup operation that started at '?2014?-?08?-?12T09:41:00.492000000Z' has failed because the
Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed
with following error code '2155348001'.
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
--> Suggestion are to check Virus scanner or consult DPM forum...
3.
OS Job failed with errors...( Backup Assist is 3rd party backup - wrapper round Wbadmin/Win Backup)
Log Name:      Application
Source:        BackupAssist
Date:          8/12/2014 4:51:51 AM
Event ID:      5634
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Backup job OS backup failed with errors.
Critical error: Unable to create VSS snapshot
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
4.
Backup Assist reports via Win backup - Snapshot in progress
Log Name:      Application
Source:        BackupAssist
Date:          8/12/2014 4:52:20 AM
Event ID:      5634
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Backup job Data backup failed with errors.
Ultra critical error: Volume Shadow Copy Error 0x80042316 - snapshot set in progress
Destination: Local directory
Start time: 8/12/2014 4:52:10 AM
End time: 8/12/2014 4:52:12 AM
Duration: 00:00:02.7300000
5.
The Block Level Backup Engine service has stopped.
6.
Later...we tried manually stopping VSS and SWPRV services - only VSS had the issue.
WBengine was not running...
C:\>sc stop swprv
SERVICE_NAME: swprv
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 3 STOP_PENDING
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc query swprv
SERVICE_NAME: swprv
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc query wbengine
SERVICE_NAME: wbengine
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc query vss
SERVICE_NAME: vss
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 3 STOP_PENDING
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc stop vss
[SC] ControlService FAILED 1061:
The service cannot accept control messages at this time.
Log Name:      Application
Source:        VSS
Date:          8/12/2014 9:20:33 AM
Event ID:      8225
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
The VSS service is shutting down due to shutdown event from the Service Control Manager.
7.
VSS still having issues here...not stopping!
Log Name:      Application
Source:        VSS
Date:          8/12/2014 9:42:33 AM
Event ID:      11
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service information:
The COM Server with CLSID {e579ab5f-1cc4-44b4-bed9-de0991ff0623} and name IVssCoordinatorEx2 cannot be started.
Most likely the CPU is under heavy load. [0x80080005, Server execution failed]
8.
Not sure why this is started again?
Plus a DCOM timeout...
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          8/12/2014 9:31:13 AM
Event ID:      753
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has successfully started.
Event Xml:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          8/12/2014 9:31:43 AM
Event ID:      10010
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
The server {E579AB5F-1CC4-44B4-BED9-DE0991FF0623} did not register with DCOM within the required timeout.
9.
Lots more errors about VSS...repeating Event ID's 11 and 8193...
Log Name:      Application
Source:        VSS
Date:          8/12/2014 9:42:33 AM
Event ID:      8193
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance.
hr = 0x80080005, Server execution failed
. Operation:
   Instantiating VSS server
10.
Then, finally stopping again...
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          8/12/2014 9:51:13 AM
Event ID:      754
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has stopped.
11.
And still repeating 11 & 8193 at this point...as we write up this post.
12.
This was suggested by the Backup Assist - software vendor....
A.)
...for 0x81080101:
"ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try again this operation."
If you receive the above error in your report, we have recently found a registry key which
contains the timeout value set by Microsoft for VSS and found that you can edit this to extend it.
To get to the registry key, open Regedit (Start > Run > Regedit) and browse to:
"HKLM\Software\\Microsoft\\Windows NT\\CurrentVersion\\SPP\\CreateTimeout".
Change value to 1200000 (2*10*60*1000 = 20 mins).
The default for the timeout period is 10 mins so hopefully doubling this will give enough time to
complete the snapshot.
If this isn't present, you'll need to manually enter the registry key. It's a DWORD 32-bit key.
--> NOTE: HAve not done this yet.
B.)
And for 0x80080005...
http://support.microsoft.com/kb/870655/en-gb
Our server does have high CPU load at times...
13.
Another post from technet mentions system volume size - here is our layout below:
A.)
OS/system Disk...
DISKPART> list disk
Disk ### Status         Size     Free     Dyn Gpt
Disk 0    Online          278 GB      0 B    (System Vol = C: Drive - OS w/ Programs and batch jobs)
Disk 1    Online         2791 GB      0 B        *    (Data drive - DFS, rsync,etc. run on D: Drive)
Disk 2    Online         1863 GB      0 B    (USB 2/3.0 - Enclosure w/ SATA disk = 2GB formatted w/ NTFS.)
DISKPART> detail disk
DELL PERC H710P SCSI Disk Device
Disk ID: CA0DEEA5
Type   : RAID
Status : Online
Path   : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0100)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 1         RECOVERY     NTFS   Partition   3072 MB Healthy    System
Volume 2     C   OS           NTFS   Partition    275 GB Healthy    Boot
B.)
Backup disk...
ST320006 41AS USB Device
Disk ID: 801AF48C
Type   : USB
Status : Online
Path   : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 4     F   BACKUPS      NTFS   Partition   1863 GB Healthy
C.)
NOTE:
Also on disk 0(system Disk) - we have a small OEM partition = 39MB and a Recovery Partition = 3GB.
D.)
Issues with WBAdmin now...
C:\>wbadmin get disks
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x80042302)
A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
14.
Ran "Check-Disk" -no errors...
C:\>chkdsk
The type of the file system is NTFS.
The volume is in use by another process. Chkdsk
might report errors when no corruption is present.
Volume label is OS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)...
116224 file records processed.
File verification completed.
654 large file records processed.
0 bad file records processed.
0 EA records processed.
76 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
156676 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
116224 file SDs/SIDs processed.
Security descriptor verification completed.
20227 data files processed.
CHKDSK is verifying Usn Journal...
35628352 USN bytes processed.
Usn Journal verification completed.
Windows has checked the file system and found no problems.
289233919 KB total disk space.
100241492 KB in 85477 files.
     57380 KB in 20228 indexes.
         0 KB in bad sectors.
    226627 KB in use by the system.
     65536 KB occupied by the log file.
188708420 KB available on disk.
      4096 bytes in each allocation unit.
72308479 total allocation units on disk.
47177105 allocation units available on disk.
15.
There are no backup error logs here - only .etl files...
C:\Windows\Logs\WindowsServerBackup\
Wbadmin.1.etl = 9:42AM on 8/12
Wbadmin.2.etl = 4:51AM on 8/12
Per windows Win troubleshooting:
http://technet.microsoft.com/en-us/library/ee692290(WS.10).aspx
http://blogs.technet.com/b/filecab/archive/2009/09/16/diagnosing-failures-in-windows-server-backup-part-1-vss-spp-errors.aspx
--> Related to Windows backup and not VSS?
2155348001 - 0x80780021 - Windows Backup timed-out before the shared protection point was created.
Should we run the "FIXVSS08.BAT" script - restarts services and re-registers DLL's - does this ever help?
Will this server need a reboot since VSS is in a state and we can't even test backups?
Is there a tool we can use to debug VSS or troubleshoot or OS backups further?
MSReport/Diag, VSS debugging, or another way of helping fix our OS(SystemState/C: drive) backup issues?
Any help is greatly appreciated - thx.
-SP
Scot Pichelman

Hi Scot,
Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
after testing.
And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
If issue still exists, please try the steps below as well:
1. Please check DCOM Server Process Launcher service is started.
2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
Note: Backup the key before edit incase it cause any issue.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
Find "ObjectName" and change the value to LocalSystem.
Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
If DCOM still not work, please compare the content of the following key with a working server:
HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
Edit if there is any difference and make sure you created a backup of the key before editing.
If you have any feedback on our support, please send to [email protected]

Issues with windows 7 after Labview 2012 installation

Hi
I am having some issues after installing Labview 2012 on machines running Windows 7. Firstly, after installing a program on a user's machine, the machine sometimes takes 20 minutes to boot up before the user can log on. The 'Please Wait' message appears during this time. This is also the case on the development machine.
Secondly, on the development machine, I am having an issue when trying to run compiled programs created in Labview. When installing, everything works fine but when I go to open the program, it appears on the task bar for a brief period before closing. It does not appear in the task manager either. I have tried this on 2 other machines with windows 7 and Labview installed and still get the same issue.
Any help on these matters would be much appreciated. Thank you

Hi
Firstly, looking at the issue with the slow Windows 7 boot up time, as Norbert_B suggested the Windows Event Log is a good starting point to find the root of the problem. The following link describes how to launch “Event Viewer” and some common problems:
http://itexpertvoice.com/home/what%E2%80%99s-taking-so-long-how-to-fight-slow-startup-times-in-windo...
Aside from that, if your computer is part of a domain, the problem may be connected with certain Windows Services that start automatically on boot up. I recommend trying the following steps:
Open up “Control Panel” go to “System and Security” then “Administrative Tools” from here launch “Services”.
Sort the list by name and scroll down to “Network Store Interface Service” right click and select “Properties”. Under the startup type dropdown select “Automatic (Delayed Start)”.
Next scroll down to the “WebClient” service again under “Properties” this time select “Disabled” under the startup type.
As for the problem with running LabVIEW executables, I have a few questions:
Do you get any error codes when it closes automatically?
Does this occur for multiple executables or just one in particular?
Does the code run without a problem within LabVIEW?
Have you tried to update LabVIEW?
What hardware are you running?
Without this information I can only think it may be caused by the Windows Data Execution Prevention (DEP) security feature. So you can try the following steps:
Right click on “Computer” and select “Properties”.
Click on “Advanced System Settings” and select the “Advanced tab, then under the performance section click “Settings”.
Click the “Data Execution Prevention” tab.
Make sure it is activated for essential Windows programs and services only, or you have an exception for your EXE.
You may also find the following link helpful on debugging applications:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/debug_apps_dlls/
Let me know if these solve the problems.
Andrew.N
Applications Engineer
National Instruments

Issue with execution of J1INCERT

Similar Messages

Maybe you are looking for