Issue with Faux Column solution for 2 Column website

Hi - I hope you can help me
I have come across a problem which I haven't seen before using the Faux Column method in DW CS5 - there is a white line appearing down the right side of my sidebar which I can only imagine is caused by the repeated background image I have set in the body tag.
The code I have added to the body tag in my css style sheet is;
background: #FFF url(../images/faux_background.jpg) repeat-y 50% 0;
Website where the issue is occuring is www.nurtureearlylearning.co.nz. The issue so far is appearing in Chrome, Firefox and IE. IN Chrome and FIrefox, it will appear and disappear as you adjust the screen size but there is no consitency with what size the browser is.
Please keep in mind that website is not finished yet - just an issue that i'd like to resolve so far
Any help would be appreciated - thanks!
Clint

I'm using Firefox and I don't see a white line. Not entirely sure why you need a background image at all for this layout since the entire page is white.
See a live example of Faux Columns
http://alt-web.com/TEMPLATES/3-col-white-gray.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

[svn:fx-trunk] 12982: Fix for issue with exposing accessible names for combobox list items

Revision: 12982
Revision: 12982
Author:   [email protected]
Date:     2009-12-15 20:44:23 -0800 (Tue, 15 Dec 2009)
Log Message:
Fix for issue with exposing accessible names for combobox list items
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ComboBoxAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListBaseAccImpl.as

Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
margin-bottom: -2px;
Your nav p will then look like this:
nav p {
          font-size: 90%;
          font-weight: bold;
          color: #FFC;
          background-color: #090;
          text-align: right;
          padding-top: 5px;
          padding-right: 20px;
          padding-bottom: 5px;
          border-bottom-width: 2px;
          border-bottom-style: solid;
          border-bottom-color: #060;
          background-image: url(images/background.png);
          background-repeat: repeat-x;
          margin-bottom: -2px;

Issue with Audit Vault Collector for Peoplesoft-MS Sql Server

Experts,
Requesting your valuable inputs regarding below issue :
Environment:
- Peoplesoft with SQL Server 2008
- Oracle Audit Vault.
Current issue with Audit Vault collector for SQL server is that it is not giving PSFT login ID instead it is giving Peoplesoft DB service Account ID.
Is this expected ?. If yes, what is the workaround ? Can Database Firewall is a best option to capture PSFT login ID ?
Thanks

Hi Rabi ,
just do one think here ..
During data source creation , in the Additional tab area , in the SQL Engine session , select "Vendor SQL" instead of "Open SQL".
HOw could u create data source without selecting the driver corrsponding to MS SQL.?
it is recommended to download the latest Driver and use this for Driver creation.
let me know ..
Regards
Kishor Gopinathan

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
Sreenivas

Hi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator)

ALV Report Output Print issue with more Columns

Hi Experts ,
I'm facing an issue while printing an ALV report which has around 22 columns .If i reduce the column display in the code . I'm able to print but not with 22 columns.. I have used Line-size = 1023 and line-count = 60 , but still the problem persists .
I also searched in SDN with similar issue but managed to get only the above solution which is not working .
Any other ways of doing it , kindly suggest .
Many Thanks,
Kumaran

175 characters is the maximum number of characters that can be generated in a line of a spool (next characters are stored on the next line of the spool). When the spool is printed, these line feeds are respected.
What is possible (I don't know) is that ALV chooses its own format type instead of the format type you have chosen when you run your program in background. To check that, just look at spool attributes (SP01).

Re : Issue with the column display in Bex reports

Hello Gurus,
I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
" replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4 are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

Anshu,
Thank you very much for above code I made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
WHEN 'ZTEXT_CAL1'.
   READ TABLE I_T_VAR_RANGE INTO loc_var_range
   WITH KEY VNAM = 'ZCALDATE1'.
    IF loc_var_range-LOW = '#'.
      dt_low = 'Not Assigned'.
      dt_high = 'Not Assigned'.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ELSE.
      CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
      CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.

Having Trouble with Faux Columns

I've reviewed several websites that have code for Faux Columns but I still can't get my sidebar to stretch along the length of the page. Here's my code:

</style>
[Item 1 | #]
[Item 1.1 | #]
[Item 1.2 | #]
[Item 1.3 | #]
[Item 2 | #]
[Item 3 | #]
[Item 3.1 | #]
[Item 3.1.1 | #]
[Item 3.1.2 | #]
[Item 3.2 | #]
[Item 3.3 | #]
[Item 4 | #]
Special
PURPOSE
This guide does not replace policy, procedures, or training
    Home Page

</script>
</body>
</html>

Faux Columns will not work in a Fluid Layout (responsive web design)
Fortunately PVII have written a nifty little JS-file that will allow you to do that. See the example here http://www.projectseven.com/tutorials/css/pvii_columns/

Problem with faux column and min 100% height

hello
i',m trying to create a faux column on this page:
http://www.malcmabe.co.uk/listtest.html.
the column i'm trying to do is the left hand side menu
column.
i just can't get this to work, so i'm obviousley missing
something.
also, i've set the wrapper as minimum height of 100%. this
isn't working, so my hunch is that it's having a knock on effect to
the measurements of the left hand column....but i may be wrong
any help would be appreciated.
the css file is
http://www.malcmabe.co.uk/listtest.css
malc

malcster2 wrote:
> hello
>
> i',m trying to create a faux column on this
> page:
http://www.malcmabe.co.uk/listtest.html.
> the column i'm trying to do is the left hand side menu
column.
>
> i just can't get this to work, so i'm obviousley missing
something.
>
> also, i've set the wrapper as minimum height of 100%.
this isn't working, so
> my hunch is that it's having a knock on effect to the
measurements of the left
> hand column....but i may be wrong
>
> any help would be appreciated.
>
> the css file is
http://www.malcmabe.co.uk/listtest.css
>
> malc
Malcolm
That's not quite how faux columns work - you'd make an image
the width
of your container with the dimensions you need - perhaps a
line only to
separate a left and right column or something a little more
detailesd -
the image's height can be sliced very small as it will repeat
on the y
axis, attached via css to the container. You can then use
margins or
divs floated left and right to keep your content on either
side.
Something like this I made earlier......
http://www.bealeandpyper.co.uk/
and the background image......
http://www.bealeandpyper.co.uk/p7bpassets/images/p7bp_layout.jpg
btw most of us in here use the faster NNTP for accessing the
newsgroups
- OE, Outlook, Thunderbird and/or dedicated mail/newsreader
apps would
do to access them. Try clicking this link.....
news://forums.macromedia.com
HTH
chin chin
Sinclair

Problem with faux column and 100% min height

hello
i',m trying to create a faux column on this page:
http://www.malcmabe.co.uk/listtest.html.
the column i'm trying to do is the left hand side menu
column.
i just can't get this to work, so i'm obviousley missing
something.
also, i've set the wrapper as minimum height of 100%. this
isn't working, so my hunch is that it's having a knock on effect to
the measurements of the left hand column....but i may be wrong
any help would be appreciated.
the css file is
http://www.malcmabe.co.uk/listtest.css
malc

malcster2 wrote:
> hello
>
> i',m trying to create a faux column on this
> page:
http://www.malcmabe.co.uk/listtest.html.
> the column i'm trying to do is the left hand side menu
column.
>
> i just can't get this to work, so i'm obviousley missing
something.
>
> also, i've set the wrapper as minimum height of 100%.
this isn't working, so
> my hunch is that it's having a knock on effect to the
measurements of the left
> hand column....but i may be wrong
>
> any help would be appreciated.
>
> the css file is
http://www.malcmabe.co.uk/listtest.css
>
> malc
Malcolm
That's not quite how faux columns work - you'd make an image
the width
of your container with the dimensions you need - perhaps a
line only to
separate a left and right column or something a little more
detailesd -
the image's height can be sliced very small as it will repeat
on the y
axis, attached via css to the container. You can then use
margins or
divs floated left and right to keep your content on either
side.
Something like this I made earlier......
http://www.bealeandpyper.co.uk/
and the background image......
http://www.bealeandpyper.co.uk/p7bpassets/images/p7bp_layout.jpg
btw most of us in here use the faster NNTP for accessing the
newsgroups
- OE, Outlook, Thunderbird and/or dedicated mail/newsreader
apps would
do to access them. Try clicking this link.....
news://forums.macromedia.com
HTH
chin chin
Sinclair

RH 10 issue with Fixed Column width

Hi,
Is anybody else having issues with setting a fix width for a column in a table? In RH v.10 the "fixed widths" are not staying "fixed" as I have them manually set.
I've recently been upgraded from Robohelp (html) v.8 to v.10.
In a "Design" view in v.8.0 when I set a column width from the right click menu (AutoFit > Fixed Column Width), the width of the column would be whatever width I'd set it to. Now, in v.10, the width is whatever width the Robohelp window is set to! For example, I have a large monitor and I've got Robohelp open in Full Screen mode, the table (a 1-cell table) gets set to the width of the window rather than the particular width I want to use! I want the cell to be a particular width (much less than my monitor or the open window's width). Can someone please tell me what I am doing wrong?
OS=Windows7.
Browser=IE9
Robohelp is installed locally (it is not being run over a network).
Thanks!
P.S. So far this is the only issue I've had after upgrading from RH v.8 to RH v.10.

Hi William,
In a "Design" view in v.10, the table (which is 1 cell) looks like a big rectangular box. I've turned off the border (cell or table border), so the border appears in gray.
Put mouse focus on this 1-cell table, then grab an edge with the mouse.
Move the table inward to make the column narrower in the view.
Then from the right click menu, choose AutoFit > Fixed Column Width.
Voilá - the width is back to the width of the display window.
Did that make sense to you? Thank you for your help and ideas.
Cheers,
Julia

Font Issue with Report Generation Toolkit for Microsoft Office

I have been using this toolkit for only a few days now, but I just have to get this issue off my back. When developing a toolkit it would be a good idea to use the same cluster to represent fonts in ALL places. If you look at "Excel Set Graph Font" vs. "Excel Easy Table" they take two completely different clusters. Why? I don't know, but it is *very* annoying.
How could something like this slip through the cracks? Is there some reason why there is this discrepancy? From my perspective as a software engineer I see no excuse, but maybe someone else can justify this oversight for me. I just hope that I don't find any more issues with the toolkit...
Naveen.

Naveen,
what you said is true when dealing with same kind of objects, but in this circumstance, different cluster defines the font of a differnt object. For example, you may not want the user have as many options with defining the font for the X Y axis title as that for defining the text in the table. This is ture when you want your generated report to have similiar styles.
But this is certainly something we will think about, thanks for your constructive suggestion,
XD Gao
Application Engineer
National Instruments

Issue with reversal of MIRO for Planned Delivery Cost

Hi Xperts
We have found out an issue while reversing the MIRO document for Planned Del costs. When we have done the MIRO, the accounting entry got correctly posted with correct account keys.Conditions are not inventoried.
However, when we had reversed it - the stock account got hit.Do not understand, why that happened.Do you have any clue?
1. Suppose we have done the MIRO for Del Cost & then performed GR.Now Stock has already consumed & afterwards we have found that the MIRO for Del Cost is wrong & reverse - in this scenario shall the Stock account will get a hit????
2. I have maintained Price Control "V" in Material Master.However, I have maintained a Standard Price by mistake.In that case shall SAP ignores the MAP & takes Standard Price into account & post PRD??
Regards
Soumick

Hi,
Before checking Planned Delivery costs accounting documents in MIRO posting and MIRO cancellation document, 1st check how Planned Delivery costs designed for your procurement process.
Use t.code:ME23N, check your Purchase order
Option-1:
Is Planned Delivery costs added to inventory account and at the same time Planned Delivery costs posted to Separate Planned Delivery costs G/L account.
OR
Option-2:
Is Planned Delivery costs posted to Planned Delivery costs G/L account ONLY
OR
Option-3:
Is Planned Delivery costs added to inventory account ONLY.
Based the above one setting, system will post goods receipt and invoice posting document with corresponding accounting entries. Also cancellation of invoice posting document refer to these setting.But account posting depends on price control available in material master.
NOTE:
Standard price procedure (price control “S”):The system carries out all stock postings at a price defined in the material master. Variances in price are posted to price difference accounts.
Moving average price (price control “V”): The system valuates goods receipts with the purchase order price and goods issues with the current moving average price.Differences in price between the purchase order price and the invoice are posted directly to the relevant stock account if there is sufficient stock coverage.
Regards,
Biju K

Issue with Member Formula written for Balance Type

Folks,
I am facing an issue with a member formula written for a balance type dimension,
The code says
IIF( IsUda([Accounts].CurrentMember, "BalanceSheet"),
CASE
*WHEN IS([Time].currentmember,[YearTotal]) THEN MISSING*
WHEN IsLevel([Time].CurrentMember, 0) THEN (BALTYPE.[EndOfPeriod])
WHEN IS([Time].currentmember,[Q1]) THEN (BALTYPE.[EndOfPeriod],Time.[MAR])
WHEN IS([Time].currentmember,[Q2]) THEN (BALTYPE.[EndOfPeriod],Time.[JUN])
WHEN IS([Time].currentmember,[Q3]) THEN (BALTYPE.[EndOfPeriod],Time.[SEP])
WHEN IS([Time].currentmember,[Q4]) THEN (BALTYPE.[EndOfPeriod],Time.[DEC])
END
,MISSING)
Outline Structure for Time dimension looks like below
+Time
--|+YearTotal
------|+Q1
----------|+Jan
----------|+Feb
----------|+Mar
The highlighted Part of the code works good for all the Measures which is With the UDA tag BalanceSheet, Except if the Measure with BalanceSheet UDA is a Parent Member.
Parent Level Measures are populated with Data(populating Dec Data) instead of showing #MISSING.
Any help on this issue will be appreciated.
Thanks
Sathish

Hello Gurus,
I raised an SR with Oracle support and they have replied by saying that, In EPM 11.1.2.4, the IE11 is only supported for interactive reporting and we will have to use IE 10 & 9 for workspace.
Yes. It works fine in IE 10 & 9.
Thanks,
Siva

Issue with Receiver SOAP adapter for synchronous scenario

Hello All,
We are facing a strange issue with the SOAP adapter in the interface we have setup. This is the 1st time we are using SOAP adapter in our system (PI 7.11 SP7). We are making a synchronous HTTP call to the web service exposed by another system in our landscape. The payload is send with SOAP envelope and there are no credentials to be maintained in PI settings.
The issue is that we are always getting timeout exception in PI audit logs after sending the request (3 minutes - standard timeout value, no additional config for this). But target system has confirmed that they are sending the response back. We tested from our server OS level and have received the response back in the same screen (to verify there is no firewall/port issue in between the systems). But when tried from RWB, it is always giving the timeout exception and we are not able to see any other log.
We have tried checking in the NWA logs as well after increasing the logging level to ALL for com.sap.aii.adapter.soap. But surprisingly, we didn't get any logs at all for the outgoing SOAP call or incoming response and hence we are unable to trace the issue.
We have setup another synchronous inbound SOAP interface (PI exposing the webservice) and it is working fine. We are also able to trace the logs in both audit log and NWA logs.
Is there anywhere else we can check for the logs? Audit logs is showing timeout error and we are not able to see anything in NWA logs.
Does the target system need to maintain PI credentials in the header when they send the synchronous response back?
Are there any specific settings which should be checked to enable the sync communication? (this should not be the case since the inbound interface is working fine)
Please help.
Thanks
Justin

Hi Amit,
Thanks for the reply.
Yes we had tested successfully via SOAP UI as well (forgot to mention that). We are getting back the expected response in SOAP UI without using any credentials. We got the same response when we tested it through OS commands from PI server.
The WS is hosted by the target system and they haven't maintained any credentials at their end. So when PI is trying to access, we don't need to provide any credentials. My question is, whether the target system should keep any credentials to send the synchronous response back to PI (java stack). We have tried that as well but since there aren't any logs, we are unable to verify whether the credentials are coming correctly.
The service interfaces are correct and PI configuration are OK. I will try the XPI inspector for logs as you have suggested.
Thanks
Justin

Issue with Faux Column solution for 2 Column website

Similar Messages

Maybe you are looking for