Issue with implementing MBCF0009 enhancement

Hi all
I am trying to restrict a user from doing GR through MB01 for a particular storage location.
So i tried implementing the enhancement MBCF0009 which has only 1 component EXIT_SAPMM07M_009, in this function module exit i am trying to display a custom message of type E i.e. a error message if the user chooses a particular storage location.
The program control goes to my code but instead of breaking there it continues to execute i.e. the statement MESSAGE E001(ZXX) has no effect.

Hi,
Could you post your code over here?
You mentioned message as MESSAGE E001(ZXXX)
Did you mention your message class in the beginning of your program? I hope it is not possible as it is standard one.
Try this code:
MESSAGE 'Your Error Message' TYPE 'E'.
Check it.
Cheers,
Raja.D

Similar Messages

Issue with implementing Find window

Hi,
I am facing an issue with implementing Find window. The find window everything is working fine, but when I am opening the form I am facing the following error
'Error: To retrieve the Information in this block, use menu option view -> query by example -> Enter to invoke enter-query mode, then view -> Query by example > Run to run your query..'
when I click 'Ok', it is navigating to the FInd window.
How can I avoid the above error message?
And also after searching, I navigate to the main window to display the records, but the 'Find' torch icon is not getting enabled, how do I that?
Thanks,
Ramu

Thanks for the reply.
Yes, I have the QUERY_FIND trigger with the code as 'APP_STANDARD.EVENT('QUERY_FIND');'
And also 'first navigation data block ' to my result block. Now that the error is gone, But still the Find Icon is not enabled
Please advice.
Thanks,
Ramu
Edited by: Ramu Chennuri on Oct 21, 2008 8:32 AM

Issue with implementing SAP note 1486147.

I am trying to implement SAP note 1486147. My software component is SAP_APPL and release is 603. But the prerequisite notes (1148361 and 1339658) are getting incompletely implemented with activation errors because of which I am not able to implement the main note 1486147.
I have created all the DDIC elements as mentioned in the note.Also created the smartform. Has anyone successfully impemented this note? Is there anything else to be done other than what is mentioned in the note?

Hi,
Resolved the issues. Before applying the note i had made manual corrections in J_1IEWT_CERT because of which my system was not implementing the note. I reversed back all manual changes i had made and then applied the note. It got successfully implemented.
Edited by: lyviaCardoza on Sep 3, 2010 7:24 AM

Issue with implementation of Service Pack 3.0 on STVN 2.0

Hi All,
I have done a re-installation of Nakisa 2.0 OrgChart as my earlier installation was giving errors in Analytics. After installation of Nakisa 2.0 OrgChart, we also applied Service Pack 3.0, as suggested by Nakisa. However, while logging into Admin Console I got this error.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: The type 'Nakisa.CDS.Web.NOMS.Manager' is ambiguous: it could come from assembly 'C:\Program Files\Nakisa\OrgChart\bin\Nakisa.CDS.Web.NOMS.DLL' or from assembly 'C:\Program Files\Nakisa\OrgChart\bin\Nakisa.Ordos.Web.Ordos.DLL'. Please specify the assembly explicitly in the type name.
Source Error:
Line 1: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Manager.aspx.cs" Inherits="Nakisa.CDS.Web.NOMS.Manager" %>
Line 2: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
Line 3: <HTML>
Source File: /OrgChart/manager.aspx Line: 1
As I could understand, this error is due to both Nakisa.CDS.Web.NOMS and Nakisa.Ordos.Web.Ordos files available in the same folder.
How do I proceed.
J. Thomas

Hi Luke/ Andrew,
The issue is resolved now.
As suggested by Andrew, the following steps were performed.
1- Make a back up of the bin folder.
2- Delete the file 'C:\Program Files\Nakisa\OrgChart\bin\Nakisa.Ordos.Web.Ordos.DLL'
3- Perform an IISRESET on the server hosting Nakisa. Start > Run > type IISRESET > OK
4- Test the administrator console again.
Warm regards,
J. Thomas

Issue with implementing Object Security in RPD (OBIEE 11g)

Hello All,
I am following these steps to implement Object Security, but it doesn't work. Please let me know what am I doing wrong here:
1. I want to block a few presentation tables for the user 'weblogic'.
2. I open the RPD in online mode and in the Identity Manager, for the application role 'BIAdministrator', I setup permissions 'no access' to these presentation tables. It asks me to 'Check Out' which I do.
3. I check in the changes, save the RPD and deploy in back in EM.
4. I login into OBIEE Answers using 'weblogic' user but alas these presentation tables are still available for me to use.
I have tried looking for a solution on the internet before posting the solution here. Please don't ask me to read through the security setup guide because I have done that. Any specific answers are most welcome.
Thanks in advance.

Try this:
Double click on the presentation table.
Go to permissions and then revoke the access to BI Administrators.

Issue with implementing bookmarkeble view activity

Hie
I am using latest jdev 11g from otn and here is the scenario:
i have two jspx pages in the adfc-config name product list and view product.
On ProductList.jspx a bounded tf is dropped a region and it displays a list of products in the system. Clicking on a project subject navigates to the ViewProduct.jspx showing the selected product details. To implement this i created a set action listener on the product tiltles and set from= #{row.productId} to= #{requestScope.productId}
On the ViewProduct.jspx the bookmareble property is true and the method specified is myBean.setPage() .
Now, if i use the url http://myapp/faces/ViewProduct?productId=101 i can see setPage method is called. However, if i navigate from ProductList page to ViewProduct this method is not called. As method is not called so my page does not render properly due to some of missing initialization.
any advise please

I do not know (yet) exactly what the bookmarkable property does for a page, but I would assume it is related to the url, and whether or not people can bookmark it.
I do not see how this would relate to your code not getting initialized unless you show us your code...
(Also are you getting any errors? It did not sound like it.)
If I am off-base, then I appologize. I certainly have a lot to learn (that is why I just started reading Frank and Lynn's new book :-)

GPU enhancement issues with ATI Radeon X1900 XT

Upon startup, PS CS4 turns off GPU enhancements and displays the following error message:
"Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software."
Problem is, according to all the research I've done, PS should be perfectly compatible with my Radeon X1900 XT card. To further complicate things, ATI does not appear to have driver updates for Radeon X1900 cards for Intel Macs on their website. Even a Google search doesn't seem to bring up any sites with the drivers. It's maddening!
Is anyone having similar problems, or can anyone offer advice? All Adobe and Apple support seem to recommend is updating my drivers, but of course that doesn't seem possible. Thanks!

I'm having a slightly different problem, but it fits in with what others are saying. I upgraded to CS4 the other day, and starting that night my system (a Mac Pro with the Radeon x1900 card) I have had issues with my display - that is, sometimes the display won't work after waking from sleep. The display is a 23" Cinema.
The rest of the system is fine (I have a laptop so I can peek in and control it remotely), and everything is just as I left it. The display itself responds to being turned on and off using the power button on the side (that is, the tiny light on the front turns on and off...). But the screen itself is pitch black, off entirely.
I took out the video card and it was, indeed, black on the intake with fine dust, so I cleaned that as best I could. That did not solve the problem, however.
Pull the plug to my desktop and plug it into my laptop, and it works just fine. Plug it back into the desktop...dead. The only thing that seems to fix it is shutting it down for a time. I don't know how long is required but it's more than a few minutes (so it's not a simple reset) and it's only been a few days and so far I've just gotten frustrated and left it over night - so it certainly could be related to cooling down.
Seems like Adobe is the culprit as the problem has *never* happened before, and has happened every day since the very day I installed CS4. I'd be reluctant to believe it...if I hadn't spent hours just upgrading to CS4 (I won't go into the legendary problems which plague Adobe's installers).
Given that when I bought this system a couple of years ago this was one of the few video cards I could choose, and it's the high-end of the bunch, there must be a lot of folks out there with this set-up plus CS4...
Sounds like the suggestion is to inhibit performance in CS4 so it doesn't fry my video card? I am running Temperature Monitor, but it doesn't show me that particular stat...

Performance Issue with RF Scanners after SAP Enhancement Pack 5 Upgrade

We are on component version SAP ECC 6.0, and recently upgraded to Enhancement Pack 5. I believe we are on Net Weaver 7.10, and using RF scanners in one plant that is Warehouse Managed. Evidentially when we moved to EHP5, the Web SAP Console went away and we are left with ITS Mobile. This has created several issues and continues to be a performance barrier for the forklift drivers in the warehouse. We see there is a high use of java script, and the processors canu2019t handle this. When we login to tcode LM00, on a laptop or desktop computer, there are no performance issues. When we login to tcode LM00, with the RF scanners, the system is very slow. It might take 30 seconds to confirm one item on a WM Transfer Order.
1.) Can we revert back to Web SAP Console, after we have upgraded to EHP5?
2.) What is creating the performance issues with the RF Scanners now that we switched over to SAP ITS mobile?
Our RF Scanners are made by Intermec, but I donu2019t think that is where the solution lies. One person in our IT Operations has spent a good deal of time configuring SAPITS to get it to work, but still it isnu2019t performing.

Tom,
I am sorry I did not see this earlier.
I'm currently working on a very similar project with ITS mobile and the problem is to accurately determine the root cause of the problem in the least amount of time. The tool that works is found here: http://www.connectrf.com/index.php/mcm/managed-diagnostics/
Isolating the network from the application and the device is a time consuming process unless you have a piece of software that can trace the HTTP transaction between host and device on both wired and wireless side of the network. Once that is achieved (as with Connect's tool) you can then you can begin to solve the problem.
What I found in my project is that the amount of data traffic generated by ITS mobile can be reduced drastically, which speeds the response time of the mobile devices, especially with large number of devices in distribution centers.
Let me know if I can answer more questions related to this topic.
Cheers,
Shari

Solution Manager Enhancement Package 1 issue with SAINT

Short Text
Solution Manager Enhancement Package 1 issue with SAINT
Long Text
Hi,
We are trying to install the SAP Solution Manager Enhancement Package 1
using SAINT. We have encountered an issue while trying to use the Stack
Configuration option withing SAINT.
Issue 1: A message appears saying OCS Package SAPK-701DHINSAPBASIS does
not match current software component vector" . Whats does that mean and
how do we resolve this issue?
Issue 2: Ignoring the above message and going forward, we see the
import condition page where it fails saying BBCPRM component must not
be installed in this system
Please check the attahed screen shots for the current Software
Component levels and the errors.
Please help to resolve the above issue and explain if we are missing
anything here.
Thanks,
Nag Koppuravuri

For the errors like ...
"OCS Package <Package Name> does not match current software component vector" will usually appears when the upgrade is not matching the "MINIMUM support package level"
Check note 1182336 - Though this note is not for the support package you are applying but the error points to same direction.
To solve your problem...
Please check the "Update Guide SAP Solution Manager 7.0 EHP 1 " available on Market place.
Go to Service Market place -> Release & Upgrade Info -> Installation and Upgrade Guide
To your left dropdown SAP Components -> Solution Manager -> Release 7.0 EHP 1 and on the right panel check above document Section "Preparations"
If you satisfy those conditions I think you should be able to apply EHP1 smoothly.
Lets us know if anything...
Cheers!

Issues with Wiki formatting implementation

As we know, since several versions now, Skype converts the following pre- and postfixes to formatted text:
*test*: Bold text
_test_: Italic text
~test~: Strikethrough text
However, there are some issues with the way this is implemented, which I try to lay out here.
When editing a message containing formatted text, the formatting is lost, and plain text copied into the chat input textbox where you will edit the message. This can be really annoying if you want to fix just a typo in a formatted message.
E.g.: "*This is* a test _to demonstrate_ a ~Skype~ bug" converts into simply "This is a test to demonstrate a Skype bug" into the input textbox.
Formatting has to be added back manually, and can be a time-eating task if you wrote longer messages.
Copying formatted messages also loses the text formatting, especially when pasting them into plain text files. Skype should restore the post- and prefixes.
E.g., copying this: "This is a test to demonstrate a Skype bug" should paste into a plain text file as "*This is* a test _to demonstrate_ a ~Skype~ bug", but currently it pastes just as "This is a test to demonstrate a Skype bug"
It should be possible to turn formatting off, like smileys. Already formatted messages are then parsed back to include post- and prefixes for display. Currently, there are solutions to disable this for messages sent by the local user, but it is not remembered between sessions, and does not affect remote users (you can try it by entering "/setupkey *Lib/Conversation/EnableWiki 0" in the chat).
Such an option should obviously be placed in the "IM & SMS > IM Appearance" category.
It would be great if you can sort out these usability issues, as it makes Skype somewhat cocky regarding the handling of the wiki formatting.
Solved!
Go to Solution.

The first two issues (which are directly related) are already known to be issues with their current implementation of formatting. It's hard to say when those issues will be addressed. In regards to your 3rd point, that has already been addressed so that you can make that change via that command and have is stick. Since they actually addressed the command issue and did not make it a GUI option they apparently don't want a GUI option at this time.
I issued that command, exited Skype, relaunched Skype then tested out bold formatting. Neither I nor my other contact (my test account) received any formatting unless I reversed that setting. Make sure you are running the latest version of Skype (7.3).

Transporting issue with Enhancement spot

Hi All;
Now i have an issue when transport the enhancement spot, we have two clients, one is for developpment, and one is for testing, i found that there is an enhancement spot exists on the testing client but not exists on the developping client. And i found that the enhancement spot is deleted by myself. Is there anyone who can help me to transport the deletion from the developping client to testing client?

Hi Vincent,
In SAP BI, queries are compound of wide range of objects of "Query element" type (R3TR - ELEM).
Please, check if all associated Query elements are actually being transported. One way of making sure of this is preparing the transport through the "Transport connection" in RSA1 transaction. You can choose "Only necessary objets" in the Grouping type, drag and drop the query to the right pane and then make sure all necessary objects are checked.
Regards,
Maximiliano

Issue with Cost center in PO and Work Order

Dear Expert,
I am facing an issue with respect to cost center in Purchase Order and Work Order. The PO is made against a work order. There are two cost center associated with the work order. One is updated under u201CAdditional datau201D field and other is at u201Clocationu201D . So the cost center in PO should essentially be the same one mentioned under u2018locationu2019 field of work order. So the issue here is that while creating PO, the cost center is picked from the u201Cadditional datau201D field of work order not from u2018locationu2019 field of WO.
Is there any exit available that needs to be implemented for overriding the cost center in PO or any other way of solving this problem?
Thanks in advance.
Thanks
Deba

Hi,
I guess that there is already some user exit or enhancement in place, since this doesn't sound like standard SAP (picking the cost data from additional data, or even having it there).
Mario

Enhancement implementation for enhancement spot DPR_EVENTS

Hi. SAP Export.
I created an enhancement implementation for enhancement spot DPR_EVENTS, and set the filter value equal to ON_TTO_IN_PROCESS, it means the code executed when user set system status to u2018IN PROCESSu2019.
I added my code to do some logical check in the method IF_EX_DPR_EVENTS~ON_EVENT, if the check failed. I can show an error message on the cProjects, BUT I CAN STILL SAVE THE DATA with ERROR. It looks like the error message is not useful.
Could some one please kindly help with provide a solution to solve this issue?

Can you please elaborate, what exactly is the requirement? Do you want that the message should be displayed as warning & processing should continue or something else?

Real time critical issues in Implementation Project

Hi friends
Please send me the *Real time critical issues in Implementation and Development Projects*
Thanks
Srikanth Reddy.P

Hi
Blue Print: Assume the client is already having sound legacy system in place.
Also assume that all the processes in FICO are neatly documented with visios.
Now study those process flows and prepare a list of sub processes.
Now prepare the fits/gaps/ assessment.
If the process fits into SAP it would be a fit. If an enhancement / modification is required, it goes into the red column.
Record all the discussions with the core users against each process and sub process.
Also list down the dependencies for each process / analyse the integration aspects.
Also plan how you would convert the legacy data into SAP.
The whole document should have illustrations / scenarios and ultimately signed off. This at any cost should not be changed unless, there is a total turnaround in the process requirements.
With the finalised blue print, you could start the activities in the implementation.
Now regarding the interview questions:
- Starts with your resume. How you have projected yourself. Have you shown real time experience or faked up projects. In any case, it is very easy to make out whether you have experience in implementation or support environment. You could never fool the interviewer.
Initially the interviewer would try to make an assessment on your genuinity.
- When did the implementation start?
- When did it GOLIVE?
- Were you involved in the end to end implementation or was it a partial role?
-If you are supporting the client, who implemented SAP?
- What tool do you use to track the support activities?
- How many tickets have you handled so far?
- Name some critical issues which you resolved and without which the production or business got affected?
- What is the system landscape ?
-Have you developed any reports / enhancements / technical / functional designs?
- Are you aware of interfaces / ALE / IDOCs ?
- Are you aware of SLAs
- Rate yourself on a rank of 1 to 10 in FI and CO
- How often have you interacted with client during implementation / support?
- What process designs have been prepared by you?
- How do you react when you get a critical issue or cross modular issues?
And so on and on
Hope this helps

Issues with Organizational Model in CRM

Hi guys,
           We are implementing CRM 5.0 and I generated Organizational Model in system using Report: CRM_ORGMAN_R3_ORGDATA_GENERATE. This report generated organizational model with no errors. But there is a issue with org model:
In our R/3 system same sales office are assigned to multiple sales area and same salesgroups are assigned to multiple sales office due to this in CRM when the org model generated it only assigned the sales office and sales group to sales org 1000 however sales org 2000 and 3000 left unassigned.
eg:
R/3:
Sales office assigned to
sales area: 1000   10   10
                       001
                       002
                       003
                 2000   10   10
                      001
                      002
                      003
And after generation in CRM:
Sales org: 1000
                  sales office: 001
                                    002
                                    003
Sales org: 2000
                   no sales office or sales org assigned.
When I am trying to create it manually then it gives me an error: "attribute_R/3_SA_ORG with value xyx already assigned".
Did anybody faced similar issue?
I even ran the report for to change the org model to enhanced version but it didnt helped.
Please give your suggestions.
Thanks
Ankit

Hi Ankit,
Its common that the sales office are only assigned to the first sales organiz unit in
CRM structure in PPOMA_CRM. The same for the sales groups that are only assigned under the first sales office unit in CRM structure in PPOMA_CRM.
No mather, the important thing is that under Function tab > Sales office tab, for a sales office, the system has all the possible combinations for R/3 sales org, R/3distribution channel and R/3 division.
And the same under Function tab > Sales group tab, for a sales group, that must contain the possible combinations for R/3 sales org, R/3 sales office, R/3distribution channel and R/3 division.
In this way, you have the structure like:
SALESORG1001
   SALESOFFICE 1100
       SALESGROUP 100
   SALESOFFICE 1200
   SALESOFFICE 1300
SALESORG1002
SALESORG1003
But inside SALESOFFICE 1100 details you have something like:
Sales office tab:
R3 sales org | R3 DC | R3 Div
1001              10         01
1002              10         01
1003              10         01
And under Sales Group 100 you have something like:
Sales group tab:
R3 sales org | R3 Sales Office | R3 DC | R3 Div
1001              1100                  10         01
1002              1100                  10         01
1003              1100                  10         01
1001              1200                  10         01
1002              1200                  10         01
1003              1200                  10         01
1001              1300                  10         01
1002              1300                  10         01
1003              1300                  10         01
Hope it helps,
Susana Messias

Issue with implementing MBCF0009 enhancement

Similar Messages

Maybe you are looking for