Issue With OLAP Variable

HI all,
we have an issue with the OLAP variable. One of the SAP olap variable(0P-perf1) is processed as Authorisation. where it should be sap exit. When we try to change at the BEx analyzer it was in disabled status.
My question here are :
1) How we can change the processing type?

Hi,
Pls refer link
creation of OLAP Variable
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55ece09411d2acb90000e829fbfe/frameset.htm
It may help you.
Thanks
Edited by: npathak on Aug 4, 2010 4:09 PM

Similar Messages

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

Issues with Shared Variables in Systems Running for Extended Periods of Time

I am designing a large SCADA system using LabVIEW DSC and cRIOs. My plan is to use shared variables to communicate the majority of the information across my network (much like "tags" in a normal SCADA system).
I'm wondering if anyone has experienced issues (connection failures, etc...) with shared variables running on systems for months (both real-time and windows based PCs) without the cRIO or PC being restarted/redeploying the variables. What is the stability of the Shared Variable Engine over extended periods of time?
Thank you for the input.
--CLD--
LV 6.1, 8.6.1, 2011 SP1, 2012 SP1

I have a system with 2 cRIO's each with Ethercat extension chassis. Each cRIO hosts ~100 NSV's and is running the scan engine at 40 Hz.
Each cRIO is coupled to a HMI that has front panel control bindings to NSV's hosted on the cRIO as well as a windows hosted mirror library (used for citadel db logging) that is also bound to the cRIO NSV library. The cRIO's have monay months of contiguous run time without reboot and I closely monitor cpu and memory usage and also rt performance metrics and will log faults if there are any such events. I also use NSV's for messaging from the HMI to the cRIO for such things as setting zero offset values and deploying configuration parameters. My overall findings are that the SV engine and the PSP are stable and efficient (especially NSV<->NSV and NSV<->HMI binding)

Issue with Default Variable in WAD after Java Patch 7.01.7.31

Hello all,
I'm running into an issue with the Web Application Designer Template execution for a particular default variable. This started occuring after Java Patch 7.01.7.31 we had implented over the weekend.
The issue is when Executing the WAD Template, we have a selection screen with a variable with default values assigned to it. When leaving the default values and hitting Ok to execute through the screen does not register and stays as is and I get a message at the top with the following: Characteristic Prob % Number has no master data for "1.00" or you do not have authorization.
This only seems to occur for this default variable on info object Prob % Number, the other default variables seem to work fine. Also another note when clearing out the values it returns data and executes through. The value 1.00 is also a valid value in the cube and also in the output display. If we run this report in the BEx analyzer, the selection screen executes through with the default variable perfectly fine, this is only an issue with the Web Application Designer Template.
Has anyone ran into this? I've searched and have not found any notes as of yet.
Thank you,
-Andy

Dear Andy,
Please raise this to SAP, seems like a strange problem this needs to be addressed by OSS note only.
Close this thread once you get a solution.
Regards.
Den

Issue with declaring variable

I am developing a multiuser application in flash, using smartfox server and as 2.0, but i am having an issue with defining/declaring a variable/object/array, and then accessing it. I am attempting to define "curMap" (whether it be a variable, array, object, whatever works) within the following function, as the returned array from the server, "resObj". This works fine as long as i only call up "curMap" WITHIN this function(as you see in the line : r_txt.text = curMap;) however whenever I try to call up "curMap" on the frame coding, outside the function, it comes back as undefined, or typically nothing. Any Ideas as to how to properly do/assign this? I have tried various things(such as _root., _global, or defining the var "curMap" outside the function) with no luck.
Here is my Code:
smartfox.onExtensionResponse = function(resObj:Object, type:String)
        if (type == "xml")
                if (resObj._cmd == "getMap")
                    curMap = resObj.db[0];
                    r_txt.text = curMap;
                }else if (resObj._cmd == "getSurr"){
                 surrMap = resObj.db;
                 b_txt.text = surrMap[0];
thanks

ahhh! yup that fixes it, thanks!

Issue with substitution variable with @MDSHIFT in BR in Calc Manager

Hi Experts,
We have a BR in EAS which is working fine.
and exported to Calcmanager, now while validation it is giving error "@BaseScenario" is not found.
the code is
@MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->&BaseScenario->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",);
if i hard code it like @MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->"P7PP"->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",); working fine.
is there any limitation with calc manger and substitution variables?
Thanks
GP

There seems to be many issues with validations in calc manager, does the rule run if you dont validate.
Cheers
John
http://john-goodwin.blogspot.com/

InfoPackage selection offset with OLAP variable

Hi Bw Gurus,
I have a requirement to load ODS with full upload everytime but in order to reduce repeated loads I am trying to use a DATE field which is not part of communication str. as a selection critera in InfoPacakge.
I changed DS to include this field avaialable for selection and It's working fine when I input date to and from values hard coded in InfoPackage.
Further I am trying to automate this InfoPackage scheduled weekly and I need to include date offset value for this DATE field to load for additional last 2 weeks every time to capture changes for already loaded data.
I have created OLAP customer exit variable having Date interval for Date starting from last 3 weeks to Current DAte and included in InfoPackage selection for DATE field but it's not working. By the way if someone can explain what's meaning for two columns there for TYPE(Variable change to selection.....) and detail for type.
Any clue for reason or any other way to accomplish this requirement?
Thanks in advance,

hi,
can you explain me ,hw you solved the pbm,
the same pbm i am facing.
i am trying to load the data everyweek ( i have date field ),so i have selected OLAP Variable option -7 and there i have selected 0WEEK,but data is not comining from R/3,then i have selected the option -6 abap code,i have written code to get the date range,even though i am not able to retrive the data.
can you suggest me
Thanks
Madhu

Authorization with OLAP Variable

Dear all,
we have the following scenario: we need to built a report where we show e.g. a value per employee.
In order to establish that user A can only see his own data and not data from user B we did the followoing:
- Creation of a table ZUSER which contains User-ID (logon) and employee number, e.g. smith / 12345
- Creation of an authorization variable with type customer exit (Y_SU202) and assign it to InfoObject employee
- In the customer exit for OLAP variable the coding reads from ZUSER
So if user A executes the report the system reads the table and fills the variable with the corresponding entry.
It works fine.
But I have to assign in the PFCG Role for the corresponding authorization object * (all values); if I enter the name of the OLAP value it doesnt't work. But I need to do that due to the fact that otherwise the user can select via filtering in the report all values as the auth. variable just works for the exection but not for the filtering (when a * is assigned) in the authorization object.
I tried to enter Y_SU202 and $Y_SU202 in the authorization object; both ways doesn't work.
Thanks for your support
Marc
P.S.: I'm not sure if I should have post this topci to the security forum.

yes, RSSM setting is fine; i have there two InfoObjects (employee number and costcenter).
i changed in the role the value to * for both fields for testing. (after $Y_SU202 did not work for the employee).
It seems that this has something to do with the i_step = 0; if I change it to i_step = 2; the initial execution works.
But if I filter afterwards in teh query on the employee (select filter value) I see all values which is wrong.
If i change the coding to i_step = 0 and the variable to input ready I do see all values, too.
it seems that the auth. check does not work

Terminal issues with environmental variables

I am having an issue with persisting environmental variables during a session. I am running an app that requires the sequential running of 3 scripts setenv.sh, build.sh, run.sh.
The first script sets variables that are being used by the other scripts. The script just contains lines like
"export ADVISOR_HOME=/Applications/Blaze/Advisor65;"
if i add echo the variables name in the script they are set, but immediately after or with env they are gone.
From my understanding (not much) these should persist as long as the window is open. Is there any setting that is being set in OS X that is sandboxing scripts? It would seem to be security-minded but is causing problems.
Also is there any way to temporarily disable the requirement to prefix a command call with ./ in os x. Many of the included scripts are calling methods in the same directory and I am having to alter a lot of scripts to include ./
Thanks in advance,
walter

walter deane wrote:
I am having an issue with persisting environmental variables during a session. I am running an app that requires the sequential running of 3 scripts setenv.sh, build.sh, run.sh.
The first script sets variables that are being used by the other scripts. The script just contains lines like
"export ADVISOR_HOME=/Applications/Blaze/Advisor65;"
if i add echo the variables name in the script they are set, but immediately after or with env they are gone.
Do you mean you echo them from within the script and then they are gone after the script ends? That would be normal. If you want them to persist through the other scripts, you could combine the scripts. The problem is that you're setting them in one process and expecting them to persist in another process. Unless the second is a child of the first, that won't work. I think it would work if you executed the second two scripts from within the first script because they would then be children of the first process. Does that make sense? I'm not sure of the correct terminology here and I can't draw a tree which is what I want to do! Another option might be to source setenv.sh rather than running it (i.e. wouldn't need to be executable) - the same way the shell does when starting up, I think.
From my understanding (not much) these should persist as long as the window is open.
I don't think it has anything to do with windows. It is just when the process exits. If you set such variables at the command line, they'll persist until the window closes because they'll persist until the process exits which is usually when the window closes. At least, in the simplest cases. But it isn't the window staying open or not that's important. It's that everything else done in the window happens to inherit the environment from the parent process. In truth, this often isn't the case anyway, but I expect that's the source of the misunderstanding.
Is there any setting that is being set in OS X that is sandboxing scripts? It would seem to be security-minded but is causing problems.
Nothing special that I know of. There is stuff for something like this in Leopard but you'd have to enable it and I'm not sure it applies here.
Also is there any way to temporarily disable the requirement to prefix a command call with ./ in os x. Many of the included scripts are calling methods in the same directory and I am having to alter a lot of scripts to include ./
You can do this but it is extremely insecure. Essentially, you can add the current directory to PATH. (PATH=$PATH:./; export PATH) It would be much, much better - much, much safer - to edit the scripts. Can you not use sed to edit them? If there is some sort of pattern, there's no need to do it by hand.
If this is an application you plan to share, you should certainly not consider changing PATH in this way unless you are aiming to produce an application with maximum destructive potential! If you don't plan to share, of course, it is your call!
- cfr

Issue with presentation variables, dashboard prompt and filter

Dear Guru's,
I have a question about constraining a request with presentation variable set by a dashboard prompt. I have a dashboard prompt, that stores its value in a presentation variable . The prompt is about region. When the dashboard opens, the default of the prompt is all choices and it needs to show my reports with "All Choices". I've created the following filter on my two reports on the dashboard:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
One report is just the column "Dim Student"."Region" (to see if it works) and with this report the above filter works just fine. When nothing is prompted it shows "All Choices" when a choice is made the report responds accordingly.
BUT
The second report on my dash with the same region column, but extended with some time dimension columns and a measure gives an error which I'm not able to solve.
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14023] None of the fact sources for ToDate(# Feitelijke Instroom:[DAggr(Feit Instroom en Uitstroom Opleidingen.# Feitelijke Instroom by [ Dim Tijd.Maand Omschrijving, Dim Tijd.Maand Nummer, Dim Tijd.Jaar, Dim Kwalificatie.Kwalificatie Niveau, Dim Leerling.RCBREGIO Regio] )], [Level JAAR]) are compatible with the detail filter [Dim Tijd.Maand Nummer = 3, Dim Tijd.Jaar = 2010].+
+(HY000)SQL Issued: SELECT "Dim Tijd".Jaar saw_0, "Dim Tijd"."Maand Nummer" saw_1, "Dim Tijd"."Maand Omschrijving" saw_2, "Dim Kwalificatie"."Kwalificatie Niveau" saw_3, "Dim Leerling"."RCBREGIO Regio" saw_4, "Feit Instroom en Uitstroom Opleidingen"."# Feitelijke Instroom Cumulatief" saw_5, REPORT_SUM(saw_5 BY saw_0, saw_1, saw_2) FROM repos_x WHERE ("Dim Tijd".Jaar = 2010) AND ("Dim Tijd"."Maand Nummer" = 3) AND (("Dim Leerling"."RCBREGIO Regio" = 'Noord-Oost') OR ('Noord-Oost' IS NULL)) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4+
While the exact same report but without the "or '@{variables.GILLES}' IS NULL" doesn't throw any errors but doesn't show the "all choices" by default.
The ultimate goal to achieve is to build a dashboard with several reports from several subject areas with one single prompt that opens default with "all choices" and constrains the reports accordingly.
Any help is highly appreciated.
Kind Regards,
Gilles

Phani,
I know "All Choices" is a special value and that it doesn't represent NULL. My filter construction seems to work fine.
My filter condition:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
When it's set by the prompt it filters the request accordingly (first condition evaluates to true), when it's not set the second condition evaluates to true and shows all the results (or it's not filtered).
The problem is that it doesn't work when time dimensions are combined with this filter. Then it throws the error mentioned in the first post.
By the way: your suggested solution doesn't work.

Issue with session variable

Hi,
I'm trying to setup a session variable to filter an Answer query based on the user login name. I've created the following
- A database table that contains a user name and its related filter (Entity)
- An initialization block for the session variable to issue the following sql: select Entity from table where user_name = ':USER'
- Created a target session variable called CURR_ENTITY as the target and assign a default value as 'No entity'.
- Filter my Answer query to use the session variable CURR_ENTITY
After restart of BI server and Presentation services and opening the report, CURR_ENTITY is always set to the default value. I've checked NQQuery,.log and looks like the initialization block was not returning any rows.
Any ideas on how to get around this issue? Thanks.
Regards,
Gerd

Hi gerd,
select Entity from table where user_name = ':USER'Check if this query is returning values in the backend DB.If so it is returning then it should work fine in session variable.
After defining the target variable CURR_ENTITY and test it in the screen.That shows you is it picking all the values or a single defaulted value.
If its showing all values then re-check your block once again.
(OR)
In the target variable instead of variable define row-wise initialization (i mean check it) and change the SQL in the variable to this
select 'CURR_ENTITY',Entity from table where user_name = ':USER'
and test it so you can use it in answers .....it should work with what is required.
hope answered the question.
Cheers,
KK

Issue with retrieving variables

Hi. Got help with some code on here before. Basically, it retrieves values from my php page and displays them in my flash movie. The code I am using is
var n:uint=1;
var tl:MovieClip=this;
try {
     var keyStr:String;
     var valueStr1:String;
     var valueStr2:String;
     var paramObj:Object=LoaderInfo(this.root.loaderInfo).parameters;
     for (keyStr in paramObj) {
          tl["valueStr"+n]=String(paramObj[keyStr]);
          n++;
} catch (error:Error) {
myString=valueStr1;
myString1=valueStr2;
The problem is this. On my html page, I type in two values for the first name and last name, say "Nick" and "Price". The above method retrieves these values and stores them in two Strings. I then display them using a text field. Now sometimes, everything works normal, and variable 1 holds "Nick" and variable 2 holds "Price". On other occassions however, its the opposite, and variable 1 holds "Price" and variable 2 holds "Nick". This is a big problem when I come to display them, as they are back to front.
My adding to the text field is straight forward (not all code included, but two text fields are created and each variable added to one of these)
tf.text="To "+myString;
addChild(tf);
tf1.text="Love "+myString1;
addChild(tf1);
I was wondering if this error could be caused by what I am doing above, or how I am assigning the variables to myString and myString1?
cheers

for-in loops iterate through an object in random order.
but you should know the keyStr for your variables so this is not an issue. for example, your flashvars might assigning:
var1="foo";
var2="bar";
and you would use:
tf.text = String(paramObj[var1])+" "+String(paramObj[var2])

Issue with :REQUEST variable

Hello Friends,
I have a SQL REPORT which populates the manual tabular form. I have a ADD button in the report region which submits as ADD. I used the where condition in the SQL report to use the REQUEST like this : - WHERE :REQUEST='ADD' ..
Also I tried to display the value of 'REQUEST' by keeping in process success message and it shows correctly as ADD indicating the value is set. can some one suggest if my usage of the variable in sql query is incorrect.
Thanks.

The question is not silly. There are techniques to do that row adding without a page refresh. However, it is not always only row adding but other stuff you need to process: validations, record update and save, issuing some messages and optimistic locking... I would suggest to stick with the given method since this is the best approach in my opinion. You may want to have a look at the example which uses collections to avoid update button pressing for each change:
http://apex.oracle.com/pls/otn/f?p=31517:246
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Issue with IP variable binding in WAD

Hi experts,
I'm having issues while trying to bind variable1 to variable2 in WAD. Here's the scenario:
I have configured through T-code rsbbs the QUERY A, which is passing two "generic" characteristic values to the receptor (QUERY B).
These two characteristic values are sent to the variables that are executed by formula (sequence) AND also to the variables in QUERY B.
The issue is when the user changes the variable selection (thru pop-up) for the formula (sequence), it does not update the variable from the Query B, thus, I can't see the correct selection for Query B after executing the sequence.
I've read numerous postings and I tried to bind these two variables (variable from formula sequence to QueryB variable) as a next command after the sequence execution unsuccessfully. The variables are not updated, it always shows the values before the user change.
PS: version 7.
Please help!
Thanks,
Orcamento

Hi Prathish,
Thanks for your reply. However, the issue has not been solved.
Let me try to explain in more detail...
E.g.
Step 1: Query A sends value thru RSBBS to Variable 1 (Query B), and Variable 2 (fox formula from IP) by right clicking on "GO TO" from selected cell>> OK.
Step 2: WAD opens with Query B - with variable values sent from Query A >> OK.
Step 3: User changes value of FOX Variable 2 (this value was first sent from step 1)... let's say that value passed from Query A was 10, and user changes to 20. Then, execute the function >> OK.
Step 4: Since Variable 1 still contains value 10 sent by RSBBS, Query B does not show results just changed (value 20).
I believe that I can bind these two variables through WAD, but I tried unsuccessfully.
Do you know if there are any configuration that I can bind these two variables in WAD, which should work dynamically?
Thank you so much for your help!
Orcamento

Navigation list issue with dynamic variable

Hi All,
I'm a little bit stock with (maybe) a little issue. I'm looking for a way to put variable on a navigation list in the same page. E.X. there is where my navigation list is pointing : f?p=&APP_ID.:20:&SESSION.::&DEBUG.::P20_3,P20_1,P20_2:#État#,#Année Comptable#,#Période Comptable#: .
I Need to inherit the value ( #État#,#Année Comptable#,#Période Comptable#:) from a sql query from the main region (list are in a subregion ).
Could some one help me with that please ?
Thanks in advance !!
Eric

Hmm.. on the last APEX SIG day in Belgium Oracle was very dark about that (as usual).
They even were not sure what features would definitely be present in the new version.
They did however expect it to be somewhere in october / november
again. you can mimic by using a report-region looking like a list
regards,
Richard

Issue With OLAP Variable

Similar Messages

Maybe you are looking for