Issue with on/off and volume buttons

My iPod Touch buttons are not responding.  I am unable to shut the iPod off with the on/off buttons.  I am unable to reset the iPod by holding down the on/off button and home button simultaneously.  It has no effect.  The iPod remains on until it runs out of battery power.  I reset the iPod Touch using iTunes.  It has had no effect.
Also, the volume button does not work.  Volume cannot be turned up or down and seems to be regulated to a medium volume.
idk what could be the issue since no damage has been sustained to the unit.  Evidently it just decided it wasn't going to turn off anymore, nor let me listen to my music.  Grrrrr.
Any ideas?  The buttons don't "feel" like they're broken.  They still 'click' when I push them.  They just don't respond.  I've reset the iPod several times but nothing changes (except that it used to disconnect from my wifi constantly - that seems to have been fixed in the process of resetting it)

What do you mean by "I reset the iPod Touch using iTunes."?
If you successfully restored (went through all steps without error) to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Similar Messages

  • My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

    my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

    You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

  • On my iphone 4 I can only hear ringer, all other sound is off and volume buttons dont work.  Can anyone help?

    I have no sound or vlume control. only can hear phone ring.  Please help !!!!!

    If the volume buttons don't work then you can go into settings, general, scroll all the way down to accessibility, click it, turn on assistive touch, go back and a little gray square with a white circle should appear. Click that and then click devices and there should be a volume control there.
                     Hope this helps!

  • Adobe form: Issue with BACK, CANCEL and EXIT buttons

    I am new to Adobe forms. I created a simple demo Adobe form and was able to print it successfully except a strange problem.
    Whenever I opt for print preview it shows me a blank page. On pressing enter it shows me the form, But now none of the BACK, EXIT, CANCEL buttons work. On pressing any of them I keep getting the print form.
    So the only way I can come out of it is /n.
    Can anyone please help with the reason for such an issue and how to get rid of it.
    Regards,
    Ashutosh

    Maybe you can tell us something more about the code you use to print your form. I think thatis the problem. Otto

  • Okay before my ipod power and volume buttons werent working but i never dropped it, then one day i was in a app and my ipod froze so i held the home button down and the screen went a bright green color and isnt showing up in itunes

    okay I just recently bought a ipod touch 4thG and im already having issues. recently the power and volume buttons stopped working after i syncd my ipod, i shrugged it off figuring it would come back i could live without it. but today I was on my ipod while it was charging and the screen just froze so i pressed and held the home button (being that's the only button that actually works) then the screen turned this bright yellowish lime green color and its not responding to ANYTHING! my computer isnt even reading it when i plug it up into itunes! so what should i do? can anyone help me? i feel like i just wasted $200...

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My on/off button and volume buttons stopped working.

    For no apparent reason, the on/off button and volume buttons stopped working. iPod touch 4th gen with 4.3.3 installed.

    You can try a couple of things.
    First a hard reboot: hold the sleep/wake and home button down until the unit shuts off and boots back up to the Apple screen.
    Second restore the device py plugging it into iTunes and under the device summary screen click restore. You want to restore from backup to make sure all your info is synced back to the iPod at the end. Depending on how much stuff is on there this can take a while.
    Thrid, take it to the Apple Store and have a Genius look at it. Depending you how bussy your local Apple store is you probably want to make a reservation first.

  • Anyone had issues with on/off sleep button not working anymore

    Anyone had issues with on/off sleep button not working anymore?

    If there is Warranty or AppleCare make Genius reservation or set up Service and take or send to Apple for resolution. If no coverage, use virtual Lock Button, tap Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can even turn OFF iPhone. To turn ON, connect iPhone to power, charger or USB of computer.

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Shut off button and volume button wont work on ipod touch. How do I fix this?

    The on/off button and volume button won't work on my ipod touch!

    You can try the standard fixes to rule out a software problem:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem that points to a hardware problem. Apple will exchange your iPod for a refurbished one for this price.
    Or you can turn on the Assistive Touch Accessibility feature. See chapter 30 of the Users Guide
    iPod touch User Guide (For iOS 5.0 Software)

  • Showing as have an unread message but I haven't got one. Same with email . Tried turning phone off and holding the power off and centre button but still showing as unread .

    Showing as have an unread message but I haven't got one. Same with email . Tried turning phone off and holding the power off and centre button but still showing as unread . Any one know how to get rid off this ?

    Showing as have an unread message but I haven't got one. Same with email . Tried turning phone off and holding the power off and centre button but still showing as unread . Any one know how to get rid off this ?

  • I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

    I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

    Did you try to connect in recovery mode, as explained in this article?
    If you can't update or restore your iOS device
    If this does not work, get it checked by an Authorized Apple Service Provider or by Apple:
    iPhone - Contact Support - Apple Support

  • How to disable safe mode on xperia z1,power and volume button doesn't work

    How to disable safe mode on xperia z1,power and volume button doesn't work

    Hi rafharum,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    A simple restart to the device would generally resolve this issue, however if the power key and Volume key are not working they may very well be causing the handset to execute safemode when ever you power the device on.
    If this is the case, you will need to get the handset to a service agent for assessment. Please use the link below to contact Sony Mobile Customer Care directly.
    http://support.sonymobile.com/global-en/contactUs/
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Issues with Exchange Account and Q10

    Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
    The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
    At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
    I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
    Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
    Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
    So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
    Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
    Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
    Model: SQN100-2
    OS Release: 10.1.0.2011
    OS Version: 10.1.0.2038
    Build ID: 525050
    Ian

    To follow-up with this issue:
    I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
    I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
    I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
    Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
    Ian

  • Multiple Issues with HTC 8X and Verizon Doesn't Care

    I have had this phone for three months and had this issue the whole time.  Searched Verizon and Windows forums and found the same thing.  Only Verizon HTC 8X having this issue.  On top of that I am now having hardware issues.  Phone SIM not showing up as connected and have to restart or re-seat the SIM.  Battery life has gone down drastically.  Overnight charge gets me 11 hours tops without using my Data plan with WIFI off and other major apps closed out.  Shouldn't have to do that to utilize features on a smart phone.  As soon as I begin using my data plan the 11 hours is cut in half.  Not to mention if I use the phone for GPS navigation it gets drained in 30 minutes to and hour.  Then the software is now freezing.  Either freezes completly and have to restart or applications i try to open, stall and then go  back to the start menu.  I have to then power off the phone which freezes and 15 minutes later powers off.  3 months into the phones contract.  Ridiculous.  Bought from Letstalk.com and they told me I am SOL.  14 days for return and 30 for exchange.  Go see HTC.  HTC says i'm SOL.  Go to Verizon and get a new SIM.  Factory Reset the device as  well.  If that doesn't help, ship it to us and we will repair.  Are you kidding.  I am a consultant for a major merger and acquisition company that deals with infrastructure practices all day.  Send you my phone for repair on a 3 month old phone.  Are you kidding me.  Finally talked to Verizon.  They are not consciously aware of the HTC 8x missed call three beep scenario when it has been on there forums since December of this year.  With all my issues they told me I'm SOL.  I don't want to send it in for repair.  That is ridiculous.  What will that solve.  A couple of the issues.  What about the three beep issue the has plagued me for months. A refurbished of a different model from two years ago, no thanks.  I received a new phone three months ago.  So you wanna make it my fault and tell me here take an iphone 4 from two years ago from 300 dollars.  I am furious with this and want to proceed with making sure this lack of decent service for an issue like this is resolved and others don't have to face this type of treatment.  I paid good money for a smartphone with reliable service.  So far i'm being told to bend over and take it from everyone.  I feel that the three beep issue alone is a breach of the contract I have with Verizon and I should be able to constitute that right and terminate this disease.

    Hello,
    I received my new "reconditioned" phone to replace my 6 month old Droid 4.
    The replacement phone only holds a charge for 6 hours or so, with minimal
    use (no internet).
    I am VERY unhappy. I left a message with the store employee who helped me
    activate the replacement
    phone, but have not heard back. This is really disappointing. I paid a lot
    of money AND signed an additional
    2 year contract in order to purchase my Droid 4. Now I am stuck with a piece
    of junk phone as is my other
    employee who has a replaced Droid 4 as well. The store even told me they had
    "issues" with this model (battery completely died on my phone 619-XXX-XXXX
    as well as on 760-XXX-XXXX).
    We concluded that when both our Droid 4 phones died within a couple of
    months of each other.
    AT the very least, we should have our phones replaced with new, so they can
    at least hold a charge and be used for
    our business as the purpose they were purchased  for.
    I would think making this right, since this is quite obviously NOT our fault
    would be clear if you expect to retain customers.
    Lisa <Personal information removed for privacy per the Verizon Wireless Terms of Service.>
    Message was edited by: Verizon Moderator

  • Ipod Touch 5.1.1 update lock and volume buttons wont work.

    So I just updated my ipod touch 4G to the ios 5.1.1 version and ever since my volume and lock buttons aren't working/responding. The funny thing is, a lot of people are posting the same question but they get the same answer from the same person that says to hold the lock and home button when everybody specifally states that the lock and volume buttons aren't working so those answers are useless. I tried resetting all the settings to factory from the settings menu but still the same problem. What should I do? Is it a bug for every new updater?

    Try changing the DNS server on the iPod. See:
    iOS 5 update issues  "Network...: Apple Support Communities

Maybe you are looking for

  • How to get a report "closed" when using the ReportViewerBean

    I read the article /people/ted.ueda/blog/2008/12/20/crystal-reports-for-eclipse--ensuring-report-cleanup from Ted Ueda regarding cleaning up reports for the RAS server.  However, I'm trying to figure out how to get this accomplished for a thick clien

  • Whay can't I run Logic 8 with the 9 upgrade on my Macbook pro?

    I have just bought logic pro 8 and in the same run upgraded it to 9 as it followed the package. But after I installed it and push the Logic icon to use the program it says - You can't use this version of the application Logic Pro.app with this versio

  • VAT tax and document types

    Hi, how can I enable an FI document type  to use a particular tax code ? Best regards

  • Import from Olympus E-PL1?

    How do I adjust my easy setup before importing from my Olympus E-PL1 camera? The manual says it's a HD(720p)camera, but I can't find a good setting. The movies look good in the viewer but blurry and bad after exporting. Any tips?

  • Clicking in a Form on a Phone Returns User to Top of Page

    I am working on a website: http://iFaulknerTest.businesscatalyst.com The Mobile site is what concerns me. There is a form at the bottom of the page. Tapping in a field of the form scrolls the page to the top and resizes the other elements on the page