Issue with printing Indesign exported PDF in Chrome

I have created a file in CS6 and exported it to a two sided PDF. This PDF works when printing from the PDF.
I have uploaded it as a document link on a website and when clicking on the link it opens in a separate window. If people use Internet Explorer or download the file the PDF and print it it looks perfect.
If the user is using Google Chrome only a section of the PDF prints at a large size. It looks like it thinks the PDF is an A3 so only prints the bottom left hand corner.
Things I have already tried - which all have the same issue.
Creating a brand new InDesign file and exporting reuploaded on the website
Saving it as a IDML file and exporting and reuploaded on the website
Had someone else export the file
Tried printing from google chrome outside the office
Checked no issues with the website backend
Checked with the IT company that services our systems.
Thanks in advance of your help.

Hi jtrew,
It sounds as though the issue is specific to Chrome. Please see the following document from Google support: https://support.google.com/chrome/answer/142056?hl=en
Let us know how it goes.
Best,
Sara

Similar Messages

Issue with printing from web pdf forms

Hello, This printer prints locally in an okay amount of time but If we go to a web site that we usually go to and pull up a pdf form, it takes up 3 minutes to print the pdf form. Any suggestions to fix this issue?
{Personal Information Removed}

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Acrobat 9 Pro issues with printing and now updating !!! :(

hello
I had an issues with printing from my gmail account or from windows live mail
so I made a complete re-installation
now I am stuck with version 9.3.0 and when I check for updates I get a message
UPDATER IS ALREADY RUNNING
only... it's not running and nothing is updating !
I made a restart... just in case... it did not change anything
as to the printing issue, in case some of you have met it and cleared it...(hope)
this was with version 9.5.0
I get no error message but no pdf is created, only a text document with this :
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
72gmvi not found, using Courier.
44dcmta not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
[96 96 97 72 96 42 64 0]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
not a good start for my week... I hope yours is nicer
I'm running Win7 Ultimate x64

thanks Mylenium
the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
does my question make sense ????

Issues with printing purchase order

Dear friends,
I'm having some issues with printing purchase orders.
Normally when I create a purchase order via ME21N and then when I save the purchase order it then gets automatically printed.
Suddenly it is not anymore working. I have created a purchase order this morning and it did not get printed. I get the message "frontend is not available"when i check the spool in SP01
The funny think is if i call up the spool nr via SP01and then do a reprint then i'm able to reprint.
What can be possibly the issue that I can't print the purchase order when I create the purchase order via ME21 when I save the purchase order? Can you help me with any guide on where I need to check why the PO is not printing immediatelly when i create the PO via ME21N?
kind regards,
Camilla

hello all,
thanks so far for your reply.
i have checked today my user settings and that shows that my prints should go to LOCL (local default printer)
The output conditions fpr purchase order have also LOCL (local printer)
The weird thing is that I can print other reports to the default printer without any issues. The issue arise when I create a purchase order via ME21N. Normally when I save the PO it automatically prints. So no manual print instructions are required from my side. Because if I give manual instructions then I'm able to print the purchase order.
Is it possible that the automatic printing is switched off and that it only prints when I hit manually the print button?
Is the automatic printing something that is maintained in SPAD?
kind regards and thanks for your help sofar

Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

Issue with print image in air

hey frnd,
plz check this link
http://livedocs.adobe.com/flex/3/html/help.html?content=printing_5.html
hey frnds,
while using this multiple print datagrid code, getting 1 issue with
print image in printheader mxml file.
I'm adding 1 image tag and runtime getting image path in variable and
want to print tht image in header ,
but it is not get printed but if i'm giving @Embed image as a source
then it is print.
Is any way there to print runtime image after adding in printheader
file ?
thx in advanced,
[email protected]

is any solution there ?

Issues with running datapump export

Hi all!
I am running in to an issue with data pump exports on 6 servers. They are running the following:
Windows 2008 server R1 standard
Oracle Enterprise Edition 11.1.0.7
I am entering the following:
expdp directory=DIRECTORY dumpfile=TEST1.dmp schema=ORCL
I get the following error when doing the export:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit
Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "PSSBACKUP"."SYS_EXPORT_SCHEMA_05": pssbackup/******** directory=PSS_B
ACKUP dumpfile=testing2345.dmp schemas=cuba
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 481.6 MB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "PSSBACKUP"."SYS_EXPORT_SCHEMA_05" stopped due to fatal error at 14:24:16
Oracle support was brought in on this but they were not able to figure it out. Can anyone help out?

I got this from the trace file:
*** 2010-10-01 14:23:10.760
Exception [type: ACCESS_VIOLATION, UNABLE_TO_WRITE] [ADDR:0x0] [PC:0x2CFAF23, kuxgetHashCode()+121]
Incident 60413 created, dump file: D:\APP\PSSADMIN\diag\rdbms\pss2437\pss2437\incident\incdir_60413\pss2437_dw01_3740_i60413.trc
ORA-07445: exception encountered: core dump [kuxgetHashCode()+121] [ACCESS_VIOLATION] [ADDR:0x0] [PC:0x2CFAF23] [UNABLE_TO_WRITE] []
I haven't been able to pull up any information indicating how to fix this error. I'm not sure where the [UNABLE_TO_WRITE] error is referring to.

Issue with printing to a network photocopier

We are a small school where the teachers all have Macbook Pro laptops. For a while we have been having intermittent issues with printing to the Photocopier, today is an example.
Teacher tried to print, worked fine, then tried again 15 min later, received message Printer is in use (I was standing next to it and it wasn't in use!) tried again 10 min later, printed fine.
Teacher tried to print, spooled for about 5 min then printed, tried again, printed fine.
From the CUPS error log there are the following:
- The Printer is in use
- ICC Profile "/Library/Printers/Sharp/Profiles/SS0HIN0.icc" does not exist.
- Remote host did not accept data file(32)
- The printer did not respond
- Stopping unresponsive job
- The printer is not responding
They are all on wireless. There is no network issue as I can ping the photocopier, get onto the Internet etc.
They don't print via a server, they all have the photocopier installed on their macbooks as an IP printer using LDP.
Thanks

You'll need to manually create the folder and install the profiles. From the finder select Go, Go to Folder. Enter "/Library/Printers/Sharp/Profiles" without the quotation marks, Go. You might have to manually create the Profile folder. You can download this disk image from Sharp that contains the icc files here; http://www.sharpusa.com/ForBusiness/DocumentSystems/MFPsPrinters/MX4110N.aspx?vi ew=drivers
Drag and drop the icc files from /MX-C26/Profiles to /Library/Printers/Sharp/Profiles
Also make sure you install the drivers from MX-C26 for the appropriate version of OS X you are running.
Hope this is clear.

Issue with printing of Currency Value.

Hi,
I have an issue with printing of Currency Value.
( Pleae let me know if any thread available already I searched it before posting but not found).
The Problem is as follows:
I have a field s_value TYPE MARM-SALK3. (which is of currency type).
The value of field is actually 1664.1450. Currency USD
But when I print this variable in ALV report it prints as 166414.50 though I used the same data type. (SALK3).
Pleaes help me to fix this.
Regards,
Venkat

Hi,
If you use ALV to display currency value, you must sure that currency amount links with currency unit. You can archive this by using ALV fieldcat:
wa_fieldcat-fieldname = 'SALK3'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-cfieldname = 'WAERS'.
wa_fieldcat-ctabname = 'ITAB'.
append wa_fieldcat to gt_fieldcat.
Please check,
Regards,

Issue with printing an Indesign PDF

Hi all,
I'm just getting into the InDesign software, picking new stuff up everyday. So far, so good! Or so I thought...
I've just created a small handout / brochure which I've converted to PDF. The problem I'm having is that when I print the PDF it creates an opaque white box on every page in the same place. I've googled it and can't seem to find anything to solve it - the only thing that slightly married up to my issue was to do with the image clipping paths, but I didn't set any to begin with. All images are currently JPG's that have been "placed" in and are set to a 30% transparency.
I'm thinking of just doing a long winded trial and error by removing all images and seeing if that's what's causing the problem. Unfortunately I have to do so on one machine, transfer it to another just to print to find out if that's the case. Which is annoying...
Any help would be most appreciated!
Cheers,
Rob

Turns out it was an issue with the images that i'd put in (not 100% sure what!). I don't think it was on the master sheet as I left that alone, but took out the JPGs in the rest of the document and put them back one by one. Can't say what was causing the issue before because I set all the transparency settings the same and placed the images in like before, but at least it's fixed now!
Update: It would appear it happens when I print the PDF as an image. /facepalm....
Thanks again for the replies and help

Printing an exported PDF file from InDesign

I have exported a few documents form InDesign to PDF. When I print the documents, some parts get cut off (top section or bottom section) but there is still room on the paper. I'ts like the printer decides not to print those sections. I am printing on 5x7inch paper and all my documents show their sizes as 5x7inches.

Here is an image I think might help... When I choose any of the size options, (fit, actual size, shrink oversized pages, or custom scale) it prints the doument exactly how I see in the preview whether or not I have the "Choose Paper Source by PDF Page Size" box checked.

PDF/A-1b compliant PDF from InDesign exported PDF

Hi folks. I need to produce a pdf/a-1b compliant pdf from an InDesign document and it is giving me fits. Because InDesign offers no native option to export pdf/a-1b compliant files, I have been exporting my document with the available presets (I've tried all of them), then running the pdf/a-1b conversion in Acrobat. However, this conversion fails every time, usually on font subset and colour issues depending on how I set up the initial export from InDesign. The only way I have managed to get a file to pass the conversion is to export from InDesign, save that pdf as images, rebuild the original pdf from the image files, then run the pdf/a-1b preflight from Acrobat. Trouble is that this results in a serious loss of resolution that I can't have for my purposes. Anyone have any ideas on how I can produce a pdf from InDesign that will pass the pdf/a-1b preflight in Acrobat?

You have to do it in Acrobat Pro after PDF export.

InDesign exported pdf viewed in Adobe Reader & Acrobat + Transparency

Hi.
In InDesign I have a tiff image with a blue color background. This image is on top of a colored rectangle with the same blue. I have matched the color settings so it does infact match & prints out well from InDesign. I also have a couple feathered images in InDesign as well.
I made the destination color under the export pdf Output section match the color working space.
As I said..everything prints well from InDesign.
I make a .pdf & open it in Reader, which also looks fine on screen, but when printed, I get these glowing edges around both the tiff image & feathered images. Is there a way to change the color settings in Reader? Or am I totally missing something else? Transparency spaces??
In Acrobat, only the vector images look a little jagged on screen, but prints fine. Is there a reason for this also?
Thank you.
Jules

Peter, my apologies for not getting back to you sooner than this, I've been away from my Mac since I posted this.
Thank you for your very kind offer to look at the files for me. In between time a friend has been over and apparently altered some settings on my iMac and the problem seems to have been resolved. (I hope!)
Thanks again - I daresay I'll be back with more questions before long...

ID CS5 Disable background printing when exporting pdf

Is there a way to disable background printing when exporting to pdf in InDesign CS5?
I really prefer the way pdf-export has been done in the foreground as it has been since InDesign 1.0.
An option where you could choose between forground and background printing would be nice since I'm pretty sure there are people out there who want background printing. Why else would Adobe all of a sudden make this, in my opinion, stupid change?

For the record, exporting PDF has nothing to do with printing from ID. In theory it was made a background task to improve your efficiency and productivity (at the request of users, by the way), since a foregorund export stops you from doing anything else while you wait, but the background export allows you to work on things at the same time.
Most of the time this actually works well. There was a bug that showed up under certain circumstances (squashed in the last patch), and some reports of export failure with other files as well that are not related to the bug. Though I was one of the first to report a hang during export, I've not seen one in at least six months, maybe longer, and none of the files that originally failed do so now. If the reason you want the foreground export is to see a progress bar, which I miss, you can open Window > Utilities > Background Tasks to see it.
If you'd like this to be a user preference in a future release, file a request at Adobe - Feature Request/Bug Report Form

Issue with printing Indesign exported PDF in Chrome

Similar Messages

Maybe you are looking for