Issue with refresh of an input schedule

Hi Experts,
We are facing an issue with the refresh of an input schedule.
We have a custom refresh via macro whereby we first refresh 3 reports in other tabs and then refresh the main schedule.
The problem is for a particular test id we need to click on refresh twice but for developer id we refresh it only once and see the value.
Can you help what could be the cause of it.
In the main report we have all dimensions in either row or column axis and we are also using Dimension override for 3 dimensions.
Let me know if any other info is required.
Thanks
Raman.

Hello,
Could you please specify the following information:
1) What do you mean by "custom refresh"? is this feature developed by the custom development team?
2) What are the level patch and the version of the product?
Regards,
Inès

Similar Messages

  • Issue with refresh of task flow in dynamic region

    Hi All,
    I am using Jdeveloper version 11.1.1.6. In my fusion application I am facing an issue with the task flow refresh in the dynamic region. In my application, I have one task flow in which the side navigation command links are there and on the right side it has a dynamic region which is used to display the respective task flows on click of navigation links. Now two of the links actually call the same task flow in dynamic region but for different purpose. One for creating a record and another one for modifying the record. The default activity of that task flow has a page fragment that has couple of fields. One a drop down and another one a text field for searching the accounts against which the record is to be created or modified. On click of the navigation link, I set the task flow id to be displayed and refresh the dynamic region. Now the issue is with those two links which shows the same task flow. Let's say  I searched for a record by putting some value in input text and then went on to modify flow using the modify navigation link. Then the value that I entered in search input text in the create flow stays and does not go away. I found out the cause for the issue and this is happening because of the immediate = true on the navigation command links. Now I cannot remove that because of the obvious reason that then it will start throwing exceptions for the mandatory fields when I am in middle of any flow. Is there any way to achieve it.
    Please help as this is quite urgent. I can also upload the sample application if anyone needs it.
    Regards
    Ajay

    try to put RefreshCondition in the pageDef file for that particular task Flow and try to make that condition to true only when you switch between edit or add. While switching, make sure that the mapped bean properties should also point to respective values i.e. either empty for new or holds some value for edit.
    So, when ever the above condition returns true, task flow gets refreshes and it will holds only the current values not the old values.
    i hope this will resolve your issue.

  • How to get the refreshed data from Input schedule while using evsnd

    Hi Experts,
                     I am using EvSnd function for sending the data from a Input schedule.
    Acc                Value                                            
    xx----
        xy------        10
        xz-------       20
    these above cell value 10,20 are getting sent by evsnd function which is written in different cell.
    Now after successfully sending, how I can see these are also getting refreshed, like in Evdre
    Acc                Value                                            
    xx----
            30
        xy------        10
        xz-------       20
    Thanks
    Anupam

    Thanks my friend.
    But the point is I need to show the updated data for all the cells (for xx, xy,xz). The point is if I use the evsnd then after the data has been sent, those two cells xy & xz will be blank once again. And so if the user will not be able to check what the data they have sent for these member from that sheet.
                  They have to get a report which will show the figures.
    And we can't even use the evgts in the xy/xz cell as the formula is going to be erased as soon as the user enter the data in that.
    so how we can do the sheet similar to evdre ip schedule..where after every data send the cell range shows latest data.

  • Issue with update_task API for updating Scheduled Dates for Task..

    Hi All,
    We have a requirement to update the project and task dates to a specified period from the current dates. I dont want to update all the tasks, and hence using the update_task API. The scheduled_finish_Date is the column from "pa_proj_elem_ver_schedule" which we want to update. As, this is the date which is shown on the Workplan tab for the tasks for (Scheduled Start and Scheduled Finish Date). I want to extend this scheduled_finish_Date to some days , say for eg. 60 days.
    To achieve, that update_task api is being used and the parameter for the scheduled_date is : p_scheduled_finish_date, this is passed as call to pa_project_pub.update_task API.
    We are also updating the completion data, which is happening fine and is updating the pa_tasks : completion_date column.
    Problem is with scheduled date, Please let me know how to go about this issue.
    Here is the sample code for calling the API :
    pa_project_pub.update_task
    (p_api_version_number => l_api_version_number_i,
    p_commit => l_commit,
    p_init_msg_list => l_init_msg_list,
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => lt_return_status,
    p_pm_product_code => l_pm_product_code,
    --p_structure_updates_flag      => g_no,
    p_pm_project_reference => l_proj_reference,
    p_pa_project_id => p_project_id_i,
    p_pm_task_reference => p_pm_task_reference_i,
    p_pa_task_id => p_task_id_i,
    p_task_name => p_task_name_i,
    p_task_number => p_task_number_i,
    p_pa_parent_task_id => p_parent_task_id_i,
    p_task_completion_date => p_tsk_actual_finish_date_i,
    --Transaction Date (shown on the screen)
    p_scheduled_finish_date => p_tsk_sched_end_date_i,
    -- Scheduled Date (shown on the screen)
    p_out_pa_task_id => l_pt_task_id,
    p_out_pm_task_reference => l_pt_task_ref
    I am really not sure if I am missing anything here, please suggest as to how to update the Schedule Start and Finish Dates using the API.
    Waiting in anticipation!
    Thank you
    Anand.

    Hello,
    Make sure the wf is active in QA (re-activate if possible), check the transport for errors, check authorizations for WF-BATCH perhaps delete and recreate via SWU3?), refresh the buffers (SWU_OBUF).
    Please let me know if any of this helps.
    regards
    Rick Bakker
    Hanabi Technology

  • ADF Table filter issue with OR or AND input value

    Hi all,
    adf:table filterable fields for OR or AND input value not works. Actually One of column is for State and it has "OR" value for -> OREGON State.
    and I tried using filterModel and queryListener for table attribute. But I am not getting exact clue where I need to fix for this issue. Any suggestion and help is appreciated greatly.
    jdev version 11.1.1.3
    Thank you.
    - Robin

    Something like this might work for the one case:
    public void handleQuery(QueryEvent queryEvent){
        // Replace the OR with an equivalent condition
        Map m =
          ((FilterableQueryDescriptor) (queryEvent.getDescriptor())).getFilterCriteria();
        for (Map.Entry entry: (Collection<Map.Entry>) m.entrySet())
          if (entry.getValue() != null &&
              StringUtils.equalsIgnoreCase(entry.getValue().toString(), "OR"))
            entry.setValue("O AND _R");
        // Process The Query
        ELUtils.invokeMethod("#{bindings.VOQuery.processQuery}",
                             QueryEvent.class, queryEvent);
        // Put the OR back
        for (Map.Entry entry: (Collection<Map.Entry>) m.entrySet())
          if (entry.getValue() != null &&
              StringUtils.equalsIgnoreCase(entry.getValue().toString(),
                                           "O AND _R"))
            entry.setValue("OR");
    }

  • Issue with Refresh link avaiable in standard UWL iView

    Hi All,
    We have added the custom column "Comment" in the Tasks tab of UWL iView.In the Tasks tab we can view some rows in the table.When we click on one row it is opening the ABAP ADOBe forms.In this Form when we change the text for the field Comment and click on save button in adobe form then we can see the new text in SWI1 tcode for the work item id. But in portal the new text is not appearing in the custom comment column.If we click on Refresh link (this link is the standard link available in UWL iview) also the new text is not appearing.
    After clearing UWL Cashe from System Admin role after that we can able to see the new text in the comment column.
    If in Adobe form after changing the text we click on Check and Send button then on portal UWL automatically new text is appearing in commnet column.In this case no UWL cacshe release is required.
    Please find the attched document
    Can you please provide me the inputs why refersh link is not working to show the updated /modifiedd text in the comment column?
    Thanks & Regards,
    Susmita

    Hi Rajesh ,
    you can implement using java script also
    check below thread
    Implementing iView auto-refresh in JSP DynPages
    Koti Reddy

  • Issues with iOS 7 Text Input

    Hi All!
    I have come across a very interesting problem since upgrading my iPhone 5 and iPad Mini to iOS 7.
    The problem, thankfully, is one that is easily replicated, and comes in two forms:
    Scenario 1:
    Open Messages
    Create a Message
    In the text input, type a word (any word will do)
    Tap 'return' on the keyboard
    attempt to bring up the 'Copy/Paste' context menu on the new line
    This is where I run into the problem - I cannot under any circumstance invoke the 'Copy/Paste' menu
    Scenario 2:
    Similarly;
    Open Messages
    Create a Message
    In the text input, type a word (any word will do)
    Tap 'return' on the keyboard
    type another word
    Tap 'return' on the keyboard
    type another word
    You should have 3 lines of text - attempt to place the text cursor after the first or second word, as if you wanted to add another word to that line
    You will find that the cursor will disappear, making it very hard to tell if you are on the end of the line you want to be on, or at the beginning of the following line.
    Has anybody else come across this problem?
    I was very excited to see iOS 7.0.2 hoping that the problem would be resolved, but it has not been addressed yet.
    I find it quite annoying...

    Hello there, HeavyJ251.
    The following iPhone Troubleshooting assistant should help resolve performance issue you are describing as well as provide additional information:
    Apple - Support - iPhone - iPhone Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/phone/
    Keep in mind, that step "Close App" looks a little different now in iOS 7. For that, when closing apps, once you are in the multi-tasking display, swipe up on the window. I would also recommend closing all apps you see on this step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Issue with respect to Daily work schedule creation for employees in UK Shif

    Hi Experts,
    We are implementing neagtive time management for our client . there are a set of employees who work in UK shift.
    Th shift timings are a bit odd.
    Timings 11:30  to 18:00 is the time when employee has to work at his Office
    and  21:00 to 22:00  he has to work from home
    Please make a note the above given timings is for a single day.
    Please guide me how to go a head.
    Regards,
    Smitha

    Smitha
    Create break schedules as below first
    01     UKBK     01     18:00     18:30               0,50
    01     UKBK     02     18:30     22:00     2,50         
    then create daily work schedule as below
    DWS grouping         01                                       Start         End
    Daily work schedule  UKDW   UK daily Work       01.01.1990 31.12.9999
    Planned working hours               DWS selection rule          01
    Planned working time            -
    Planned working time     11:30  -  22:00
    Normal working time             -
    Core time 1                     -
    Core time 2                     -
    Work break schedule      UKBK
    Hope it will solve your problem.
    Surya

  • Issue with Bulk Load Post Process Scheduled Task

    Hello,
    I successfully loaded users in OIM using the bulk load utility.  I also have LDAP sync ON.  The documentation says to run the Bulk Load Post Process scheduled task to push the loaded users in OIM into LDAP.
    This works if we run the Bulk Load Post Process Scheduled Task right away after the run the bulk load.
    If some time had passed and we go back to run the Bulk Load Post Process Scheduled Task, some of the users loaded through the bulk load utility are not created in our LDAP system.  This created an off-sync situation between OIM and our LDAP.
    I tried to use the usr_key as a parameter to the Bulk Load Post Process Scheduled Task without success.
    Is there a way to force the re-evaluation of these users so they would get created in LDAP?
    Thanks
    Khanh

    The scheduled task carries out post-processing activities on the users imported through the bulk load utility.

  • Issue with Refresh of Transaction Iview (urg)

    Hi All,
    Have a urg requirement in which there is a transactional iview EX (S_ALR_87013532). Now  the customer wants that this iview has to get refreshed every 3 seconds or any other predefined interval of time.
    Have already gone through the blog
    The specified item was not found.
    As it is just a TRANSACTION IVIEW is there any other approach. Please throw some light how to approach it, will be helpfull.
    Regards,
    *RAJ*

    Hi Rajesh ,
    you can implement using java script also
    check below thread
    Implementing iView auto-refresh in JSP DynPages
    Koti Reddy

  • BPC 10.0 Input Schedule refresh : investigating performance issues on frontend side

    Hello,
    We are running SAP BPC NW 10.0 SPS8.
    We recieve a lot of complaints regarding performance issues.
    More specifically BPC Input Schedule refresh takes ages (11 minutes actually)
    I am a SAP Basis Administartor with some solid BW experience, but very linited BPC knowledge.
    So raf we have tried the following :
    * BPC Full and light ptmimize of the BPC Cubes.
    * Updating Oracle Statistics
    * Activating ABAP/SQL traces*
    * Checking USJTAT Logs
    Then it rutned out that the perfromance problems werre not caused by the backend SAP BW server (only 9 seconds of bakend  processing are displayed in UJSTAT).
    The overwhelming majority of the processing is spent on the frontend side : on the computer of the user.
    We really would like to know what is happening on BPC Frontend side, but are really lacking any investigative method .....
    other that  checking memory/CPU usage o nthe frontend computer.
    From your experience, is there any tool/method to allow to conduct some investigation on what is going on the frontend side, when a BPC Input Schedule is refreshed ?
    Thank you for your attention.

    Hello Vadim,
    We still need to get confirmation from the external consultants who developed the BPC solution, but as far as I can understand it :
    We do not use use member formulas
    We are indeed talking about EPM (without EPMRetrieveData functions)
    The perfromance  problems occur in DEV and QAS , after a restore of the BPC environment (backup from PRD)
    We already had the problem in the past, but we never knew precisely how to solve it, it is as if there was some missing links between the restored BPC environment from PRD and the DEV/QAS system
    One additional information, we checked the EPM CLient Log , and here are the errors displayed while refreshing the input schedule :
    The thing is that I have no idea what it means ...
    ?FILE_TYPE:DAAA96DE-B0FB-4c6e-AF7B-A445F5BF9BE2
    RECORD_SEPARATOR:35
    COLUMN_SEPARATOR:124
    COLUMNS:Time|Severity|Category|Method|User|DSRRootContextID|DSRTransactionID|DSRConnectionID|DSRCounter|Thread|Text
    SEVERITY_MAP:DEBUG|Debug|INFO|Information|VERBOSE|Verbose|WARNING|Warning|ERROR|Error|FATAL|Fatal
    HEADER_END
    2014-04-18 08:41:17,446|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
    2014-04-18 08:41:18,613|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
    2014-04-18 08:41:18,630|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
    2014-04-18 08:41:18,648|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
    2014-04-18 08:41:18,731|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
    2014-04-18 08:41:37,171|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 1#
    2014-04-18 08:41:39,348|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 0#
    2014-04-18 08:41:39,474|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 0#
    2014-04-18 08:41:39,536|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 0#
    2014-04-18 08:41:39,597|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 0#
    2014-04-18 09:00:22,088|ERROR|Dataservice|FPMXLClient.BPCProxy.MetaData_Data.DataServiceHelper.ExecuteReportAsStream|BPCUSER|||||ServerCallThread_666f378d-d824-4a8a-bf38-0da8493e2382|An error has occured on the server#
    2014-04-18 09:00:22,252|ERROR|BPC10Connection|FPMXLClient.Connection.RESTConnection.ExecuteReport|BPCUSER|||||ServerCallThread_666f378d-d824-4a8a-bf38-0da8493e2382|An error has occured on the server#
    2014-04-18 09:00:22,268|ERROR|OfficeWrappers|FPMXLClient.Office.EPMReportManager.ExecuteReport|BPCUSER|||||1|An error has occured on the server#
    2014-04-18 09:00:22,317|ERROR|OfficeWrappers|FPMXLClient.Office.EPMExcelReportManager.RefreshReports|BPCUSER|||||1|An error has occured on the server#
    2014-04-18 09:00:22,447|ERROR|AnalyzerOne|FPMXLClient.AddIn.RefreshSheetWithScan|BPCUSER|||||1|Execution of Report Default Report failed : #
    2014-04-18 09:00:22,537|ERROR|Automation|FPMXLClient.EPMAddInAutomation.RefreshActiveSheet|BPCUSER|||||1|Execution of Report Default Report failed : #

  • Issue with BPF, OVERRIDE and AUTOREFRESH

    Hi,
    we are working with BPC 7.0 SP3 for Microsoft and we are experiencing an issue when opening reports or input schedules from a BPF: if we a set the override current view function for one or more dimensions the report is not refreshed and shows 0 values.
    The report seems to be correctly configured, and when we open it from the report library (not from the BPF) everything works fine.
    The error did not happen with BPC 5.1: we manged to replicate the error also on a simple application with a very basic report (only a cell with EVGET with the override).
    Did anyone of you experienced a similar issue or found any possible solution?
    Thanks for your help,
    Davide

    Hi All,
    The Issue with BPF is solved.
    When we cheked the mbr table populated from data manager package, some of the cols were populated with NULL, where as when populated fron front end(excel sheet), it was filled with blank values '' instead of Null.
    When populating the mbr table from data manage package, ensure to fill all the columns of the mbr table with appropriate data or blank values but not NULL. None of the cols should have NULL.
    We ensured this and tried the BPF, its working.
    Hope this explaination helps somebody trying with automation of dim processing using DM pkg.
    Regards,
    Vivek S
    Edited by: Vivek_s90 on May 19, 2010 7:38 AM

  • Xi-Fi Issue with recording

    Im am recording in nuendo and Im using the creative asio driver. When I record a track on track one all is good. However, when I go to track two and hit record, it wants to record the play back on track one. I cannot play a track and record on a separate track without the first track being recorded also. How do I multi track record with the creative XI -FI ($199.00) setup. I also have an audigy zs sound card that I have no issues with. However my inputs seem to have stopped working after I swapped out motherboards. So I went out and purchased this creative XI-FI setup.
    PLEASE HELP!

    kbone wrote:
    Im am recording in nuendo and Im using the creative asio driver. When I record a track on track one all is good. However, when I go to track two and hit record, it wants to record the play back on track one. I cannot play a track and record on a separate track without the first track being recorded also. How do I multi track record with the creative XI -FI ($199.00) setup. I also have an audigy zs sound card that I have no issues with. However my inputs seem to have stopped working after I swapped out motherboards. So I went out and purchased this creative XI-FI setup.
    PLEASE HELP!
    WHAT? Is there this "What U Hear" option on X-Fi too???
    Just change the recording source to the one you're recording from (I can't say how because I do not have the X-Fi card). This can be done on Audio Creation Mode settings panel (I suppose). On Audigy .rec source shall be set to AnalogMix(...) or Microphone normally.
    jutapa

  • SAP BPC 7 Input schedule refresh issue

    Hi,
    I have created a input schedule which is working fine on my machine in dev and production and same is working fine in dev on my client machine but it is not working in the production system.
    I checked the input schedule in Production and found that EDVRE is not ok on  my client machine but same template shows no error on my machine.
    Please suggest if i am missing someting.
    Regards,
    Sanjeev Kumar

    You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) and the release (5.1, 7.0, 7.5) of BPC which you are using.
    Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future.
    Thanks and best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Applications Regional Implementation Group (RIG)

  • SAP BPC NW-  input schedule refresh issue

    Hi,
    I have created a input schedule which is working fine on my machine in dev and production and same is working fine in dev on my client machine but it is not working in the production system.
    I checked the input schedule in Production and found that EDVRE is not ok on my client machine but same template shows no error on my machine.
    Please suggest if i am missing someting.
    Regards,
    Sanjeev Kumar

    Hi Sanjeev,
    Without looking, it will be very difficult to tell the reason.
    When you are saying that the EVDRE is not OK, then check in the first cell, where EVDRE formula is written. You need to trace it down. It will be difficult for us to say. However, I have a feeling that there must be some problem in the key ranges only. Check the formulas as well.
    Hope this helps.

Maybe you are looking for