Issue with Sales office values in BI

Hi Team,
We have a issue with the sales office values in a BI report.
The report displays 7 sales office values for the division 01. Where as in ECC, we have only 6 sales office values exists for the same division 01.
These sales office 7 has been have been loaded on april n may months.
The master data has all the sales office values 01- 10.
Those sales office values are coming from the Infocubes, 'Billing Document Condition' & 'Open Orders'.
I have the checked the Multiprovider, Infocubes and the InfoObject and values exists.
How to proceed further and correct these values?
Appreciate your expert guidance...
Thanks
Regards
Santhosh Kumar N

Hi Krishna,
Thanks for the reply. The Sales office field is directly mapped in the transformation and does not have any routine. Its the Key field.
The Billing Document Condition infocube is being feed by the DSO '2LIS_13_VDKON - Billing Document Condn' and datasource is '2LIS_13_VDKON'.
The Open Orders infocube is being feed by the DSO Document Order item / Delivery; below which we have another 3 DSO.
1st DSO has the Datasource '2LIS_13_VDITM'
2nd DSO has the Datasource '2LIS_11_VAITM'
3rd DSO has the Datasource '2LIS_11_V_SSL'
The Sales Office 7 has txn records for the month of April & May.
The report built on top of a Multiprovider and the for the months June and July, we have txn records fine for the sales office 01 - 06.
Please help me, if i am missing anything here and make me to understand better.

Similar Messages

Issue with Analysis Office Add in

Hi,
User are having an issue with Analysis Office and giving the error.
From Analysis Office-> Open workbook->after Login to AO using BW connection
After opened the report ->when refresh the report, getting the error
"An Exception occurred in one of the data sources. SAP BI Add in has disconnected
Nested Exception. See inner exception below for more details
Initial RANGE-LOW for customer exit variable ****_EXIT_001 corrected ..
Under details
An exception has occurred in one of the data sources.
SAP BI Add-in has disconnected all data sources.(ID-111007)
We are using BO AO for MS Office Add-in 1.4 SP3 in BO server.
Please let me know the reason for this error and how to fix this.
Thanks in advance.
Jayakrishna

Hi Krishna,
Thanks for the reply. The Sales office field is directly mapped in the transformation and does not have any routine. Its the Key field.
The Billing Document Condition infocube is being feed by the DSO '2LIS_13_VDKON - Billing Document Condn' and datasource is '2LIS_13_VDKON'.
The Open Orders infocube is being feed by the DSO Document Order item / Delivery; below which we have another 3 DSO.
1st DSO has the Datasource '2LIS_13_VDITM'
2nd DSO has the Datasource '2LIS_11_VAITM'
3rd DSO has the Datasource '2LIS_11_V_SSL'
The Sales Office 7 has txn records for the month of April & May.
The report built on top of a Multiprovider and the for the months June and July, we have txn records fine for the sales office 01 - 06.
Please help me, if i am missing anything here and make me to understand better.

Issue With Sales Document Type in BW.

Dear Experts,
I am facing an Issue with Sales Document Type(Object name is 0DOC_TYPE).
when i am loading data from R/3 to BW It is converting Sales Document type as follow
Sales Document Type in R/3                         Sales Document Type in BW
OR                                                                        TA
CR                                                                        G2
DR                                                                        L2
I check with an ABAPer and he told that there is conversion exit for this Object so that's why it is converting when sending to BW. But the user wants to see in Report same as it is in R/3 like OR, CR DR ... etc.
I have done some investigation and found that the conversion exit (CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) are converting the values based in the table TAUUM
The staructure of TAUUM is
MANDT(Client) SPRAS(Language) AUART(Sales document type (not converted)   AUART_SPR(Language key for sales document type)
and values are
100 E TA OR
100 E G2 CR
etc....
The same Conversion exits(CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) and table TAUUM are available in BW as well. So i thought I can Use InfoObject 0DOC_TYPE by changing it's conversion Routine as AUART(which runs based on the above mentioned conversion exits).
but the the problem is table TAUUM(Pool Table) does't have any data in BW.
So can anyone tell me is there any option to load data into table TAUUM from R/3 or any other option to solve this issue.
Your ideas will really help's me.
Thanks in advance,
Dara.

Hi Venkat,
Thanks a lot for your immediate response.
The InfoObject 0DOC_TYPE was without conversion exit by default. but when data coming from R/3 it is converting and sending to BW So that's why i am planning to use conversion exit "AUART" in the info Object.
I checked data in R/3 using RSA3 it is showing sales document type as "OR" and for the same transaction data when i checked in PSA it is showing as "TA".
Could you please let me know if there any other options.
Thanks in advance,
Dara.

Multiple Sales group assigned with sales office to Sales area

I need to know whether i could be able to assign different sales groups to Sales area in BP master.
Eg Sale grp 1 assigned with sales office 1 to Sale org 1, DC1,DIV1.
      Sale grp 2 assigned with sales office 1 to Sale org 1, DC1,DIV1.
      Sale grp 3 assigned with sales office 1 to Sale org 1, DC1,DIV1.
The standard system is not allowing to maintain more than one combination if the same Sales Area. In the practical scenario, there could be more than one sales group can look after the sales in Sales Area thats attached to one sales office. Is there otherway to check this requirement?
Another requirement is i need to read the sales group value during processing the transaction ( Remember still i have not saved the transaction and i am processing it). I have found the some BADI which is not helped me lot. Eg i am processing the lead by entering existing BP/ prospect, i need to read the sales group assigned in the transaction.
Any body can help me out.
Thanks
Edited by: K Srikrishna on Feb 20, 2009 12:17 PM

Hello,
As of release CRM 4.0, it is possible to use the "Enhanced Backend
Integration Model", where you may assign a sales office to more
than one sales org, and a sales group to more than one sales office
However this assignments are shown in a different way as in the
standard model: multiple assignment are not viewed in the tree
structure but in tab "FUNCTION".
This is the standard design of the system. You can find more
information about this new model in symptom of the note 691015.
Also Please go through the documentation under following path:
Customer Relationship Management
Master Data
Organizational Management
Data Transfer
Convert Org. Model to Represent Multiple Assignments in SAP ECC
( Documentation).
I hope this information helps you.
Regards,
Sri.

Issue with sales order stock that is referencing a non-existing sales order

We have an issue with sale order stock.
Due to user error we have ended up with a negative quant of sales order stock in a bin. Further the error was due to mis-keying of sales order number. Hence this negative quant is referencing a sales order that does not exist.
We need to get rid of this quant.
I thought of cycling this quant off as a solution. And hence replicated the scenario in the test system. I was able to create a TO to cycle it off but cannot clear the differences from 999 . The error I get while trying to do this is "SD document not in database or has been archived" . This error is true since the sales order actually does not exist. So cycling it off did not work.
Can anyone suggest how we can get rid of this negative quant of sales order stock ?
Thanks

Hi,
You said that your user mistyped the SO number and it resulted in a -quant. In which transaction was it possible? If I give a non existing no. SAP doesn't allow me to book.
If I were you I would check both in WM & IM what the user had done...step-by-step...
Negative quant comes to existance in interim storage type if we book e.g. a GI. It should have started in IM...how was your user be able to do that??? If it was possible cannot you reverse the IM booking?
(...if all else fails...cannot you create a SO document with external number assignment with the same number?...)
BR
Csaba
Edited by: Csaba Szommer on Jun 24, 2008 8:31 PM

I had Acrobat XI Pro Trial installed on W8.1, and I had to uninstall it because issues with MS Office 2010. Now I try to reinstall Acrobat and It does not allow me to use the trial version anymore even it was not over. What to do??

Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.

The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

CS4 issues with Microsoft Office Small Business 2007? Other apps?

I recently purchased the CS4 upgrade and a new laptop. Last night after nearly 7 hours I finally got it all installed and working correctly. I had the versioncue.dll error which caused most of my pain. Anyway... I've been lurking on the forums since CS3 launched but passed on it due to all the issues I had read about it's installer, finally I felt I needed to take the plunge and upgraded my software (from MX2004 suite). My question is this.
Currently I have a very clean laptop with only:
Kaspersky 2009 and CS4 installed.
I'm looking to install Microsoft Office Small Business 2007 but I have a concern with the Small Business Manager SQL Server. From other post I've seen that the sql servers have conflicted with adobe applications, has anyone had any issues with this or should I be able to install it now without issue. I'm trying to pre-emptivly make sure I don't screw something up and have to install everything again from scratch.
My end goal would be to have: Kaspersky security suite 2009, CS4, MS office Small Business 2007, Paragon back up application. At that point I want to create a restore and if anything happened I'd have the bulk set up easily again.
Does anyone have any other no no's about what does and does not play well with CS4?
My Setup:
Gateway FX 7805u laptop
dual core centreno 2 2.26
4 gigs DDR3
Geforce 9800m gts 1 gb
320 gb 7200 harddrive - not sure on make
Vista 64
All drivers up to date except the new Nvidia drivers as they are still beta
Thank you in advance.

I should also have mentioned (ask) about the fact that when I first installed I had gotten all the way past the initial installer and to the updates so the suite had already been activated/registered.
After getting the versioncue.dll error it has you remove the suite and many folders pertaining to it. So after I did all that and reinstalled it automatically put my info back in for me (obviously one of the folders it doesn't have you move) and I don't recall it re-registering it again. I'm assuming I am fine with my activations and it only counted it once as it was the same machine with an uninstall/reinstall? Everything seems to be working ok, i'm just curious as to what it actually did? Did it take another activation or no? I'm planning on installing to my desktop as well as soon as I get the board/proc replaced, so i'm just looking down the road for potential issues.
Thanks again.

Possible Issue with Latest Office 2001 Update

In the last few days my MB Air mid-2013 with Mavericks did an Office 2011 update to Version 14.3.9. Today I used it for the first time and Excel crashed each time I tried to use it. To get the job done I had to revert to the earlier build (version 14.3.8) from a backup and that appears to work normally.
I don't know if this is an issue with Mavericks or if the update to 14.3.9 would have crashed with ML, too. Nor do I know if Word would have crashed since I had to get the task in Excel done before an appointment.
Phil

Apparently cannot edit the above. Title should have Office 2011, not Office 2001
Phil

Status issues with sales process

Hi Friends,
I have an issue with thrid party sales order processing
Step#1
My client runs the sales order for
Material Qty
p-100 10
p-101 10
p-102 10
step-2
Purchase requisition created and from vendor delivery happened
Step-3
My user created billing with reference of sales order for below material
Material quantity
p-100 20
p-101 10
p-102 20
step-4
user found mistake and he cancelled the invoice and created new billing document
for
material quantity
p-100 10
p-102 10
again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
material quantity
p-100 10
p-101 10
p-102 10
now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
please suggest m

Just checking to see if anyone has re-produced any of these issues...
Thanks!
Jason Walters

SCM Issues with Sales Orders Created through CRM

Hi All,
I'm trying to ascertain any issues with ERP processing that will not update orders created through CRM, i see there was a OSS Note some time back informing that the backorder reschedule program would not update orders created in the CRM system. Is this still the case and are there any other process that we should be marking as an issue?
Thanks

Hi Sirisha,
The solution depends on the exact issue you are facing.
The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
If this is the case, then you can follow the steps below:
1. Find the Message ID and Message No for the error message
2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
Let me know if this is not the issue you are facing.
Regards,
Nelson

Compatibility issues with Microsoft Office?

I am planning to buy a 13"MBA - Are there any known issues with working with years of files generated with Microsoft Office?
Any suggestions?
Many thanks

The only problem you might run into is when opening MS Word documents that are in a very old (i.e. pre-2003) versions.
UNLIKE trying to open a pre-2003 document in say, Office 2010 on Windows, you won't have to jump through hoops and recite arcane incantations to get it to open. In OS X, if you try to open the docs by directly clicking on them in the finder, you'll get a warning message and they will not open directly, but all you have to do is open them from the File menu from within Word.

Issue with BI Office

Hi All,
I am using Oracle BI Office which Integrates with MS Office 2007.
Whenever I open a MS Excel Sheet 2007. It gives tab as :
Add Ins > Oracle BI > Login
When I login I am not able to see the presentation catalog. Though the testing of the connection with the server is successful.
Though I was able to see the presentation catalog when I was working on MS Office 2003.
Please get back to me if you have encountered similar type of problem.
regards,
Apoorv

uninstall BI office plugin and reinstall again. Some times it works,if your existing installation has some problems or corrupted when you upgrading your word.

Sales Office values linked to Sales Org

Hi,
How can I connect sales org to sales office and sales group in IT900? for example. If user selects Sales Org 001 then a list of Sales offices that are under that Sales org will only show. And then if the user selects a Sales Office 001 then a specific list will onlybe available for selection for the sales group.
Thanks in Advance

Hi,
In OVXM we assign sales office to sales area.
OVXJ we assign sales group to sales office.
E.g In sales order creation VA01 enter sales area, when press F4 in Sales office, system search for possible sales offices from OVXM.
Regards,
Chandra

Performance Issue with Selection Screen Values

Hi,
I am facing a performance issue(seems like a performance issue ) in my project.
I have a query with some RKFs and sales area in filters (single value variable which is optional).
Query is by default restricted by current month.
The Cube on which the query operates has around 400,000 records for a month.
The Cube gets loaded every three hours
When I run the query with no filters I get the output within 10~15 secs.
The issue I am facing is that, when I enter a sales area in my selection screen the query gets stuck in the data selection step. In fact we are facing the same problem if we use one or two other characteristics in our selection screen
We have aggregates/indexes etc on our cube.
Has any one faced a similar situation?
Does any one have any comments on this ?
Your help will be appreciated. Thanks

Hi A R,
Goto RSRT--> Give ur query anme --> Execute =Debug
--> No a pop up ill come with many check boxes select "Display Aggregates found" option --> now give ur
selections in variable screen > first it will give the already existing aggregate names> continue> now after displaying all the aggregates it will display the list of objects realted to cube wise> try to copy these objects into notepad> again go with ur drill downs now u'll get the already existing aggregates for this drill down-> it will display the list of objects> copy them to notepad> now sort all the objects related to one cube by deleting duplicate objects in the note pad>goto that Infocube> context>maintain aggregates> create aggregate on the objects u copied into note pad.
now try to execyte the report... it should work properly with out delays for those selections.
I hope it helps you...
Regards,
Ramki.

Authorization Issue with Custom Pending Value Object and Anonymous Users

Hi,
I am just converting my demo from version 7.1 to 7.2. I am not doing upgrade. The demo uses a custom pending value object USER_REQUEST. The idea is that new employee goes to Java AS as anonymous user and enters her details and store where she will work. After submitting request there is an approval process using custom entry type USER_REQUEST. If the request is approved then IdM converts USER_REQUEST into MX_PERSON entry. This works nice in 7.1 but I am having problems with replicating this in 7.2. I created new UI task accessible by anonymous that creates new USER_REQUEST entry. I also assigned role idm.anonymous with UME action idm_anonymous to UME built in group Anonymous users.
My problem is with the field STORE. This field is a reference field to another custom entry type STORE (this entry type will be used in context based assignment). Every new employee must selects a store where she will work. The problem is when user clicks on button "Select". Web dynpro terminates and returns authorization error. I also tested this with entry type MX_ROLE. I added attribute MXREF_MX_ROLE and same issue. So it seems that just assigning UME action idm_anonymous is not enough to list objects from identity store. I found a workaround for this issue. When I assign also UME action idm_authenticated to Anonymous users then it does not dump and I get a pop up window where I can search for store. It does not seem right to assign idm_authenticated to anonymous users.
Another issue is with display task for entry type USER_REQUEST. I assigned a display task to entry STORE and I set that Anonymous have access to this task in Access control tab. I assigned default value to the field store. So when a user opens page she can see a hyper link to display already assigned store. When user clicks on this hyper link it opens a new pop up window and user must authenticate against Java AS. After successful authentication the display task for entry STORE is displayed. I would assume that anonymous user can display it without authentication.
So to me it seems like authorization checks have been changed in 7.2 versions and are more strict for anonymous tasks. Hence my question is how can I implement my scenario. Am I missing some configuration or what's the proper solution to my two issues? I don't count assigning idm_authenticated to Anonymous users as a solution. This workaround does not solve my second issue.
Thanks

Some of the folks from Trondheim labs check, but rather infrequently. There's another person who I guess is in consulting that also checks from time to time.
Sorry I can't help you with your main question...
Matt

Issue with Sales office values in BI

Similar Messages

Maybe you are looking for