Issue with sales order to planned order.

Hi Guru's
We have sales order with FERT materials.  These items are made using planned order and then process order.  Currenlty we are using planning stategy 40.  We are really more of a make to order type business but need to still forecast as well.  Do you know if we can still peg requirements between plan, process and sales order but still allow forecasting. 
I want to ensure any planned process orders are assinged/pegged to the sales order as early as possible to assist with planning and processing.  Further to this if we can do this,  can we change the pegged requirements if we decide a batch needs to be rejected and a new planned order is required for the sales order.
I hope this is enough information.
Please let me know
thanks

Hi
This is very useful information,  can you tell me if we should set our HALB up as well with these planning stategies,  HALB's either go directly to a sales order or a further process order.    A|lso can we change the pegged requiremments from MD04 as I cannot see this anywher in SAP.  Finally do these 2 strategies still allow forecasting.
Thanks again

Similar Messages

  • Issue with sales order stock that is referencing a non-existing sales order

    We have an issue with sale order stock.
    Due to user error we have ended up with a negative quant of sales order stock in a bin. Further the error was due to mis-keying of sales order number. Hence this negative quant is referencing a sales order that does not exist.
    We need to get rid of this quant.
    I thought of cycling this quant off as a solution. And hence replicated the scenario in the test system. I was able to create a TO to cycle it off but cannot clear the differences from 999 . The error I get while trying to do this is "SD document not in database or has been archived" . This error is true since the sales order actually does not exist. So cycling it off did not work.
    Can anyone suggest how we can get rid of this negative quant of sales order stock ?
    Thanks

    Hi,
    You said that your user mistyped the SO number and it resulted in a -quant. In which transaction was it possible? If I give a non existing no. SAP doesn't allow me to book.
    If I were you I would check both in WM & IM what the user had done...step-by-step...
    Negative quant comes to existance in interim storage type if we book e.g. a GI. It should have started in IM...how was your user be able to do that??? If it was possible cannot you reverse the IM booking?
    (...if all else fails...cannot you create a SO document with external number assignment with the same number?...)
    BR
    Csaba
    Edited by: Csaba Szommer on Jun 24, 2008 8:31 PM

  • SCM Issues with Sales Orders Created through CRM

    Hi All,
    I'm trying to ascertain any issues with ERP processing that will not update orders created through CRM, i see there was a OSS Note some time back informing that the backorder reschedule program would not update orders created in the CRM system. Is this still the case and are there any other process that we should be marking as an issue?
    Thanks

    Hi Sirisha,
    The solution depends on the exact issue you are facing.
    The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
    If this is the case, then you can follow the steps below:
    1. Find the Message ID and Message No for the error message
    2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
    Let me know if this is not the issue you are facing.
    Regards,
    Nelson

  • Number Range issues with sales orders in CRM and R/3

    Hi,
    We are currently using CRM4.0. I have sales orders created in R/3 and they are replicated into CRM.  These sales orders can only be created in R/3.  I have given them a number range of 0000000001 and 0005899999, however we have reached the number 0005899999 so we increased the internal number range for the sales orders in R/3 to 0009499999, however we forgot to update the number range for the corresponding sales transaction type in CRM so we are getting the following error in CRM:
    +Enter a business transaction number between 0000000001 and 0005899999
    Message no. CRM_ORDERADM_H532
    Diagnosis
    You have attempted to enter a transaction number which is not allowed for the transaction type.
    Procedure
    Enter a number between  &1 and &2. Make sure that you issue a number which has not already been issued.+
    We have now updated the CRM number range to match that in R/3 to 0000000001 and 0009499999 but we are still getting the error above on our existing sales orders in CRM.  I thought that increasing this number range it will remove the error but when I open sales orders in CRM the error is still there. 
    Is there any way to remove this error message?  Any tips or advice would be much appreciated.
    Please note we've already checked the post Re: Number Range Problem and note 427289.
    Kind Regards
    JoJo

    Hi Sirisha,
    The solution depends on the exact issue you are facing.
    The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
    If this is the case, then you can follow the steps below:
    1. Find the Message ID and Message No for the error message
    2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
    Let me know if this is not the issue you are facing.
    Regards,
    Nelson

  • Re:Issue with Sales Order block

    Hello Everyone,
    In my company they have some materials for which they are custom coded in a way that when the sales order is created with these materials  it immediately creates a production order for that particular material.
    These are high value materials for which they have credit block (Business asked for these particular materials) so manually needed to release the credit block.
    But when there is a credit block it is manually checking the production order flag to delete and also when the block is released it is re-creating a new production order for the material (duplication is being done) and also if a change is made in the sales order then the production order is getting affected.
    Can anyone help me with a solution.
    Thank you!

    Check in t.code OVB8, whether any routine is assigned under column RNo. If assigned, then remove and assign routine 5 under SyRoutine. Then test again by creating a new sales order.
    Regards,

  • Issue with Sale Order Change

    Hi All,
    This is regarding the Sale Order Change where I am updating the reference document field.
    In WE19,( taken one successful IDOC )When I am using the Standard Inbound  ( IDOC_INPUT_ORDCHG) ,IDOC is failed and getting message as "There is no article description for Item".
    But if I use Inbound Function Module ( IDOC_INPUT_ORDCHG) in Foreground  mode,IDOC is successfully created.
    Please let me know the cause for this issue.
    Regards
    B.Dheepa

    Check note 161744 helps you.
    thanks
    G. Lakshmipathi

  • Issue with sales order when doing the availability check.

    In MD04 we have a material avail date of 12.05.2011.    The order was then changed to 13.05.2011 delivery date to reflect this availability,  but then delivery time was added e.g GI time and route time which then showed the sales order in MD04 as 18.05.2011.    However,  if we run the availability and take the 18.05.2011  and key this in the delivery date,  it shows in MD04 as 13.05.2011.  It seems like the availability check is only looking backwards,  and I can't find a setting in ATP relating to this.  In MM they have foward and back consumption in days on MRP3.  Do these fields impact this.
    regards
    Kylie

    Check in OVLY what is maintained to your sale order type
    thanks
    G. Lakshmipathi

  • Planned order creation with sale order assingment at the run time of MRP

    some material item not planed with sale order stock in MRP run time. all setting in material master are corrected as i knowing.having some mistake in setting other configuration.

    Planning strategy is Make to order individual collective as individual but still come as make to stock plan orders
    Incase of Header material- Plan order is creating in MTS
    Check the sale order procurement tab, Is The requiremnt type is relevant to your Stratergy?, if not chnage it to correct requiremnt type and rerun MRP again
    Incase of component material- Plan order is creating in MTS
    Check for the component material MRP 4 View, individual/Coll.req- as 1. If not set as 1 and rerun the MRP again

  • BAPI For Create Goods Issue for Sales order with picked quantity

    Hi friends,
            Is there any BAPI available to create Goods issue For sales order with picked quantity...............?
    we hv used BAPI_OUTB_DELIVERY_CREATE_SLS
    with sales order .......its creating delivery order but not doing goods issue with piked quantity........

    pls,reply its argent

  • Quality inspection for the items issued for Sales order

    Hi, How to map the qc for the items issued for sales order?

    Dear Yadav,
    -Activate insp type 10 in the Material Master-QM view insp setup (MM01)
    -Create Inspection plan (QP01) with usage as Goods issue & assign Insp characteristics
    -Create Sales order (VA01)
    -Delivery against the Sales order (VL01N) or through sales order menu. Delivery Insp lot gets created after Delivery is made.
    -Do results recording and take usage decision (QA32)
    Note:
    -This inspection is non stock relevant inspection. There will be no stock posting through Quality Management.
    -Post Goods issue in the delivery can be made only after taking the usage decision.
    Regards,
    Keerthi.

  • Consume PIR with Delivery, instead of with Sales Order

    Hi Experts,
    I am posting this question here, because in PP forum I did not find solution.
    Is it possible and how, planned independent requirements (PIR) to be consumed not with sales orders, but with outbound deliveries?
    I did the following customizing - created Z1 plannign strategy as a copy of strategy 40. In Z1 I changed the customer requirements type from KSV to 011 (Delivery requirement). Requirements transfer is disabled for sales orders and is enabled for deliveries.
    When delivery is created it is displayed and planned from MRP but it does not consume the PIR.
    Consumption mode and periods, as well as strategy Z1 are maintained in my material master.
    Please advise is this possible and how?
    Thanks in advance,
    Nikolay

    Hi Madhu and thank you for reply.
    Please find my answers bellow.
    1) Customer requirements will be taken into account first OK.
    Yes, but not SO, just outbound delivery.
    2) Sales orders that exceed planned independent requirements can influence production OK.
    Not sales orders, but deliveries must influence the production.
    3) The most important factor is the ability to react flexibly to the customer demand OK.
    OK
    4) Planned Independent requirements are allocated and reduced during sales order processing OK.
    The consumption must be done upon delivery, not on sales order.
    5) PIR's will be reduced at goods issue for delivery OK.
    I want to have PIR reduced when delivery is created.
    Thanks and waiting for your reply.
    BR,
    Nikolay

  • MRP is conflicting with Sales order requirement Qty and date

    Hi experts,
    We have below scenario:
    Material has the stock 100. It has reorder point 3 and MRP type V2 (Automatic reorder point with external requirements) and planned delivery time 10 days.
    MRP run creates purchase requisition whenever the stock falls below reorder level or/and based on customer orders requirements.
    We created first sales order for Qty 80 and delivery date 03/01/2012.  Qty 80 is confirmed against this sales order.
    We created second sales order for Qty 50 and delivery date 01/31/2012. Now remaining Qty 20 is confirmed against this order. So we have requirements of 30 Qty for this second order.
    When we run MRP, it supposes to create Purchase requisition for Qty 33 (30 + 3) including reorder point (3 Qty). As the delivery date for this order is 01/31/2012 and requirement Qty is 30, and planned delivery time is10 days, MRP run should create purchase requisition. But it is not creating.
    If I change the planned delivery time to 30 days, it is creating purchase requisition. It is considering sales order delivery date of First order (delivery date: 03/01/2012), but not for second order (delivery date: 01/31/2012).
    So MRP is conflicting with Sales order requirement Qty and date.
    Appreciate your help in this regard to resolve the issue
    Thanks,
    Srini

    Hi,
    We are using manual reorder point planning with external requirements (V1)
    Thanks,
    Srini

  • Interesting and an  imporatant issue at sales order schedule line.

    hi all,
    interesting and an  imporatant issue at sales order schedule line.
    i created a sales order with 10 qty.and the system proposed a two schedule lines.
    let's say to order created date is 27.11.2008.and the requested delivery date is 27.11.2008.
    but the stock is not available today then the system proposed two more schedule lines apart from the 27.11.2008.so now there are three schedule lines like below.
    schedule line date                      Material availabilyt date   delivery date                   
    27.10.2008 with zero quantity.     
    28.10.2008 with 5 qty.                28.10.2008                     29.10.2008
    02.10.2008 with 5 qty.                02.10.2008                     03.10.2008
    now the delivery and pgi already for the schedule line 28.10.2008.
    then when i run the availability check on 01.11.2008 system is over writing the material vailability date as today at the scheduleline number two.
    now i can able to view only two schedule lines only.
    schedule line date                      Material availabilyt date   delivery date                   
    28.10.2008 with 5 qty.                01.11.2008                     29.10.2008
    02.10.2008 with 5 qty.                01.11.2008                     02.11.2008
    now my concern when we reschedule the avalability check it should notchange the Material availability date of the schedule line which i already delivered.
    Regards,
    sheshukumar

    can any one repsond for this.....

  • SAP Mobile Sales 2.0 delta load issue for Sales Orders

    Hello,
    we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
    Background
    Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
    During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
    Settings and troubleshooting so far
    We don't have any limitations for sales orders in CRM Sales Mobile configuration.
    We've run delta loads for all objects in transaction SDOE_LOAD.
    MAS_CUSTOMIZATION etc seem fine.
    We've re-run initial load for sales orders from CRM.
    In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
    Checked steps suggested in discussion
    SAP CRM 2.0 initial load issue
    Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
    If I change one of those historical sales orders in the backend, it gets sent to the device.
    If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
    To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

    First Doubt i got clarify by my self as we can go with Unwired Runtime option .
    But i still have doubt in :
    2. How can i Modifying the Main Menu for iOS.
    i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
    Same how can i do for iphone/ipad.

  • Pricing issue in sales order

    Hi All,
    We are facing pricing issue for few sales orders.
    The pricing is being carried for  line items even though there is valid condition record exist at pricing date of line items .
    For example we are creating order on 26.10.2010 and Requested delivery date is 01.01.2011.
    The pricing date at line tem is 01.01.2011 and condition record is valid only till 31.12.2010.
    Still pricing is carried for line item and it is not for all the sales orders .
    So could please advice how to overcome this kind of errors?
    Thanks in advance

    Hi All,
    We are again facing pricing issue in sales order,the pricing date of line item is not in synchronization with the condition record validity date.
    Due to that incorrect pricing is being carried out .
    But when we do repricing the error is getting fixed.
    So could you please let us what could be the root cause for this error ?
    This is not happening for all the orders,for only few orders it happens.
    If we create new order for  same sold to ,sales doc type the error is not occuring.
    Thanks,
    Praveen

Maybe you are looking for