Issue with SKY GO

All OK with Sky go until I downloaded IOS 5 now all I get is a message: Media Streaming Temporary streaming error. Please try another channel. When trying another channel it is the same and message repeats itself?

Not sure if you are still looking. I have after about 3 months and ongoing discussions with Sky I have a fix for this! And since I never found it on this forum I 'll give this gem back. All you have to do is create a new user ID (you can have up to 10) in addition to your lead profile.Just register it as if you were creating a completely new account and sign in with this instead. You'll need your account number but this is on your original profiles homepage on my sky (if you're using sky go away from home like me) or just on your sky card in your box. Make sure you go through the whole process of verifying your email address and sign in with it on sky go on your laptop before you attempt with your console (took me a while to realise this) and it should work all fine!At least it did for me! Also just to clarify you will still have to use your old login for any bills, account management etc as the first one you create goes down as your lead profile.

Similar Messages

Has anyone experience iMac memory issues with One Drive (previously Sky Drive) - uses 5GB of my 8GB memory!

I recently started experiencing memory issues with my iMac due to One Drive using up to 5GB of my iMac memory (total of 8GB). Every time I start up my iMac Activity Monitor shows One Drive uses around 4-5Gb of the internal memory for no reason. Previously Onde Drive seemed to work fine, it's only since about 2 weeks I notice this. It's really annoying as the iMac freezes up regulalrly and I need One Drive to synchronise my files across different devices.
Has anyone experienced this too and are there any known fixes?

Yes this is happening to me too, since the last upgrade. Eventually MacOS starts insisting I "Force Quit" all my applications as I have run out of application memory.
OneDrive doesn't appear in that list because it's not an application... but Activity Monotor clearly shows it's the culprit, taking up 5GB+ of RAM.
I've raised the issue on Microsoft's forums:
http://answers.microsoft.com/en-us/onedrive/forum/sdperformance-sdother/onedrive -for-macos-memory-leak/fe04cf60-949f-47b6-b886-10539b5c5cc3?tm=1397636232934

Powerline/Homeplug Issues with Homehub 5

Hello all,
Having an intensely annoying intermittent issue with Powerline adapters & HH5.
Set up is:
BT Broadband Extender flex connected to HH5 upstairs with a BT Wifi Home Hotspot downstairs (just to increase wifi coverage)
TP Link TL-PA211 Powerline adapter also connected to HH5 upstairs with 2 other TL-PA211s downstairs (1 for Sky demand & 1 for PS3...different rooms)
They have all worked at same time!......but
Intermittently - the PS3 TL-PA211 will stop working & then "re-connect" of its own doing later & the Wifi Hotspot will stop working (no data light either upstairs or downstairs) & then spring into life of its own accord eg. last night it did it overnight!
I have done no end of pairing & unpairing ritruals & full resets to the point where I think I might need a new stair carpet.
I'm now beginning to think there might be an issue with the homehub?
I'm aware of its "smart" capabilities & switching etc.......is there any setting that I need to look at or a re-boot or refresh or anything?
Thanks in advance all!

Would agree with gk406.
Firstly - leave the hub alone.
When you set up a home network system, despite 'out of the box solutions' coming with two adaptors, one to wire via ethernet to the router and another to position wherever, if you connect both systems directly to the router it can cause compatability issues, as both will fight for control of the 'satellite' adaptors to the point they don't know which one to communicate through, so they end up not doing anything. I am guessing the odd disconnections/reconnections is due to Sky taking control of the system - checking for updates etc in the middle of the night, then relinquishing control once having carried out its checks so the other device can reconnect...
Pick one system to use (shouldn't really matter if both 200mb or 500mb systems- though I have a mixture of both so have the 500mb adaptor plugged into the router) though I am thinking the TP Link as they are the most prevalent in your system, and unplug the other. Connect one device (of the chosen system) via ethernet to the router, connect its paired mates and ensure all works as advertised and the boxes you have connected to it can get online. I would check the Skybox under its own settings to confirm it is connected - they can sometime refuse to connect and need to be powered down and back up to let them see the network. You could also take a note of its IP address to make sure you can see it on the network, then trial download something from On Demand to verify all is OK. If TP Link comes with any software to monitor the adaptors make sure all is up and running. I guess at this point you could leave the BT system off, to make sure you don't get any odd disconnections overnight.
Once that is verified, connect only one of the other BT devices and check it connects up to the network, and that you can connect to it.
For this step, to save both your legs and carpet, I suggest you do this upstairs next to your router. I tend to get all my powerline adaptors in one room with the router and a laptop, then set them up on a power brick - purely to make sure they all connect to the network and that I can connect to them using the laptop - THEN distribute them around the house, verifying each one in turn connects OK before I move to the next.
Obviously you could do this the other way around, by plugging the BT adaptor into the router and your BT hotspot adaptor downstairs, then just using the two TP adaptors for your sky and PS3 - there shouldn't be any reason for it not too work.
Hope that helps - apologies for length!

Does it work with Sky modem/router?

Hi folks,
does the airport express base station work with Sky broadband?
I want to connect the base station to my router via ethernet cable (in 2 different rooms) and use it to extend my wireless range, and print wirelessly.
Anybody done this with the standard issue sky modem/router?
Cheers

Hi
The 'standard issue' modem/router as provided by Sky used to be the NetGear DG834G IIRC? If it still is this model then yes it works. IMO it's best to attach the AE and use it in Bridge Mode. Depends on what you want to achieve though.
Tony

Issue with router

So I am an ex Be customer who was transfered when they were bough. I have been having issues with games very recently disconnecting and after doing a ping test saw I was getting a fair bit of packet loss. I think I have narrowed this down to the wifi from the router since over a wired connection it runs fine. It is a 5+ year old technicolor router supplied by Be so I wouldn't be surprised. Anyway running via a Cat 5 cable is impractical as the only phone socket is no where near the computer.I was going to use another router I have lying about but I can't find the settings needed for Sky anywhere? I'd appreciate some help!

Here are the settings you need.
1.. Enter the following details within the routers Graphical User Interface (GUI):
•Encapsulation: PPPoA (PPP over ATM)
•login/username: [email protected]
•Idle Timeout: 0
•Internet IP Address: Get Dynamically from ISP
•Domain Name Server (DNS) Address: Get Automatically From ISP
•NAT: Enable
•Multiplexing Method: VC-BASED
•VPI: 0
•VCI: 38
2. Save settings

Appalling experience with Sky customer service

I am appalled with the recent service from Sky. I wanted to cancel my subsrciption due to Sky charging extortionate amounts for crap TV. I was intially told when re-contracting that if I wanted to terminate my contract that I would be charged. Today I spoke to Sky to cancel and was told that I am NOT allowed to cancel. I feel trapped in my contract. Sky constantly rip customers off and I have had enough. After today's experience I would never recommend Sky to anyone as they treat their LOYAL customers (I have been with Sky for 8 years) like S**T. They are only interested in tapping up new customers and once they have TRAPPED them, bleed them for all the money they have!!!!!!

Well thats funny as i am in contract with Sky( just under 6 months left) and had to cancel a just over a week ago and had zero issues doing so,i just called up explained why i had to cancel and that was that the whole process took me around 15 minutes and that included being on hold and going over the early termination fee's. Your free to cancel whenever you want to but you will be expected to pay early termination fee's if your within a minimum term.

DSL AC68u not working with sky ADSL?!

Hi, I am in serious frustration here. Today my Asus DSL AC68u arrived and I've been trying for about 2 hours to get it working. I have 2 major issues:
1. The DSL line is reported to be "unstable" in the web interface and the DSL light keeps going out on the router itself.
2. The internet light does not come on AT ALL and when I try and go onto a website it does not work.
Please help, I have gone through the setup process twice, I tried setting up manually and letting it detect settings automatically as well and I have no luck. Remember, I am on ADSL, not fibre. My old Sky SR102 was working fine before I set it up with no issues whatsoever and I don't know what to do. Any ideas? Thank you.

Thanks for the help people but I have doscovered I have problems. Just spent ages on the phone with Sky broadband and there are problems with my service but going to have to wait 72 hours whilst they perform tests and look in to it. Can anyone explain this to me please as I cannot get my simple little head around it. Sky told me they have boosted my line and I am now getting 7mb, something I have never had and still don't. I logged in to my router which also confirmed 6969kb and yet my internet is so slow its cringe worthy. I cannot load Youtube videos or play simple games on facebook and if I perform a broadband speed test with different website they report I am getting around 11 to 12kb. Which is right, was also being offered fiber which I cannot afford but whos to say I wont have trouble with that.

Xbmc issues using sky fibre?

I was on sky normal broadband and used the xbmc via box and pc but found watching some items at 1020p would cause issues, buffering.I moved to sky fibre and now find the films stream ok, but when i use the kodi to watch 3D films or other content these will now not load, but before was fine.Is fibre got any security issues with these sites or links.

It's very dependent on what time of the day you access the content because of the sites the host the material, the early evening to 10pm is the worst for buffering issues, even for those using hybrid fibre. Do ensure you are using the latest release of kodi, which is 14.2 and try the genesis addon, as that's rather a good addon and offers lots of sources for streaming to kodi. You can also tweak the buffers by adding settings to advancedsettings.xml, instructions for doing so can be found by sesrching on Google.

E72 issue with GPS

I have an E72-1 which I bought in Hong Kong. I have installed latest software and O/S updates.
Everything works fine, except that the GPS software which comes with the unit does not display my altitude or lat/ long co-ordinates. In fact the fields are not even on the tab along with the other data. Is this a region specific issue with this model, and more importantly is there anything I can do about it???
Thanks

Which GPS aplication are you reffering to? Is it Ovi Maps ot GPS data?
The Position function in GPS Data should give you all the data you referred to but only once it has obtained a GPS position fix. It is says waiting for GPS, that means it does not have a position fix yet.This could take a while and will only happen if you are outdoors and the phone has a good view of the satellites in the sky.

Update iTunes 7.3.2 and now sync issues with AppleTV

I knew it, I installed the latest upgrade as it said it solved some issues with iPhone Activation etc and added stability, well Apple is very stable, so stable it does not sync anymore with iTunes.
I tried removing and reconnecting it to iTunes, this at first seemed to help, but the sync stopped after 10 minutes...
Anyone else have issues?

I would have to agree Capaho because I tried everything before...
Well its official, after trying every troubleshooting tip & talking to tech support which sent me some more help info. My ATV is dead. I thought I had a revelation on what could be done to fix it but I was horribly wrong...I unplugged the unit for the 15th time to reset it and when I plugged it back in I heard the pop, and ATV was on its way to the Great Gigabyte in the sky.
I bought the unit July 5th. It now sits in the bottom of my trash can...funny thing is Im gona waste another $400. I cant find my receipt and it doesnt matter cuz even tho it was efed before it "popped" i still get blamed for user error.

Issues with Creative Cloud for teams deployment workflow

The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
[Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
It can be installed from command line by:
Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

Hi Boncker,
I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
Please do let us know if that worked for you or not .
Cheers,
Kartikay Sharma

Issue with magsafe/charging (blinks green, amber, off)

Having a quirky issue with my mid-2009 Macbook Pro.
A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
But the problem still exists.
The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
I have reset the SMC a couple times actually, but no change.
Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
Thanks!

Try resetting the system management controller
http://support.apple.com/kb/HT3964?viewlocale=en_US
If that did nothing for you, try resetting the NVRAM
https://support.apple.com/kb/HT1379

Issue With Page Break When Sorting is also applied on group

Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumar

Hi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha

Issue with PTO (Paid Time Off) quota generation

Hi All,
We have an issue with quota generation of PTO for our employees.
The issue goes like this:
We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
we have paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
we have the following logic that has to go in this config:
-- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
-- Depending on the working hours of the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible. I really need this to get it done ASAP. Looking forward for help.
Thanks,
Chowdary.

We use TM00 schema. Can i call TS15 and TS 12 rules into TM00 acheieve my issue of quota entilements?
Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

Issues with iMessage when switching data carrier (wifi - cellular)

So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W.

Issue with SKY GO

Similar Messages

Maybe you are looking for