Issue with transformation class when i have same first name and last name

Hi All,
we have a custom transform that will get the record from the trusted recon from Oracle DB, build the User Login, then check the OIM DB USR table for the existance of the user id.
- If the user ID already exist, then they modify the new one to make it unique.
The issue we are finding is that if there are two or more records with the same first and last names that would generated the same login id, that the first one is NOT committed in the DB before the 2nd one is checked on.
- Then the 2nd will attempt to save as the same userid which will fail.
Regards
$sid

I would recommend to put the User Login generation algorithm in the Pre Process Event Handler which will act at the latest state of DB and no race condition will exist. Database sequence too can be a good option if client is ready for it. The reason is it may be that if there are only 3 John Miltons already, the next User Login should be JMILTON4... However, database sequence will continue to generate numbers no matter what... So, it may even come JMILTON1213... Each time database sequence is read, it increases by 1 and probably this is not what the client would want because it breaks their user Login generation algorithm...

Similar Messages

I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

I had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged....

Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings!

Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings! Anyone else have this issue?

I think its meant to show your name, not your ID.

How can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

how can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

Why do the 20 values have to be different? The same code should work even if some are equal.
What do you mean by "get the result"? The result is available at the output terminal and all you need is a wire to get it where you need it. That could be an indicator, another operation, or even a hardware device.
What is the data type of the 20 values? An array? A cluster? A bunch of scalars? A waveform? Dynamic data?
LabVIEW Champion . Do more with less code and in less time .

Function module(first name and last name as a parameter with table)

hi,
i just want to know how i match input value in function module with the self created ztable first name and last name as a parameter in function module(import).
regards
Ankur

thanks for your help actually i am concatename first_name last_name into full_name
import parameter
FIRST_NAME like ZANKUR-FNAME first name
LAST_NAME like ZANKUR-LNAME last name
export parameter
full_name like zankur full name
excaption
error if name not matched
source code
concatename first_name last_name into full_name

Address book sync with google contacts - first names and last names flipped

Hi,
I am trying to sync my mac address book with my contacts in google/gmail and I have a strange issue. All my contacts written in english alphabet is syncing correctly, but when I have names in Korean characters, the last name and first name gets flipped. Without fail. All other fields seem to synch correctly, but the first name is mapped to the last name field, and vice versa. I have recently upgraded to OS X Lion on an iMac.
Any help would be greatly appreciated.
Jay

can anyone answer this?
at some point, I remember being able to do this. 10.5.x maybe? With 10.6 . . . .
I do recall, however, that I stopped doing it because the sync went haywire. I did it the other way around: I have all my contacts in Address Book, so I exported them and uploaded the vCards to Gmail, after deleting all Gmail contacts. That's not such a great option. Surely this is well-automated by now?

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.

Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.

Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

Hi BC,
I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
This is causing us mayhem.
We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
Jo

Hi there,
The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

I have an issue with speaker/microphone. when i call or i recive a call the person on the other side can not hear me.

i have an issue with speaker/microphone. when i call or i recive a call the person on the other side can not hear me.

Hello aalapdesai112,
Lets see if we can get you back to taking calls normally again. Start your troubleshooting with the article below and go through checking to making sure that you are up to date with your iOS as well as a simple restart on your iPhone.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Regards,
-Norm G.

Just wondered if anyone else is experiencing the following problem and knows a solution. I know a few friends who are also having the issue so its obviously something wrong with IOS7. Basically I have an iphone 4 and upgraded to v7 and most recently v7.

Just wondered if anyone else is experiencing the following problem and knows a solution. I know a few friends who are also having the issue so its obviously something wrong with IOS7.
Basically I have an iphone 4 and upgraded to v7 and most recently v7.0.2. When I am on calls the phone started to beep and vibrate and sometimes change the call to speaker. It seems to be that the screen is sometimes active whilst on calls and so my ear is actually pressing the buttons and hitting numbers or changing it to speaker phone. It has also cancelled a call a few times.
This is extremely annoying and makes every call a worry.
Any ideas of how to solve this problem?

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Both my iPad and iPhone have ios8 On either device in Calendars edit shared with add person when I enter an email address and press add nothing happens - just goes back to edit screen and what I have entered has gone. No error message or any clue

Both my iPad and iPhone have ios8
On either device in Calendars> edit >shared with> add person when I enter an email address and press add nothing happens - just goes back to edit screen and what I have entered has gone. No error message or any clue about why I cant share my calendar. Please help.

UDPATE:
Spoke with Express lane, and issue was escalated. Kudos to the support guys that handled this one (Brian and Yi). Went through everything in detail and took all the crash dumps off the iphones and ipads to send to engineering.
After backing up the contacts, the recommendation was to delete all contacts in iCloud. Doing that caused my iCloud to crash (in the browser), so more crash dumps were sent to apple.
Eventually got all contacts deleted, then did a resync. Looks like IOS devices are coming back to life and syncing again.
Also, Outlook iCloud connector has just been updated to ver 1.0.1 so i installed that on their recommendation.
BOTTOM LINE workaround:
1. Backup contacts
2. Delete contacts in iCloud
3. Delete accounts on IOS devices
4. Recreate accounts on IOS devices.
Hoping a real root cause can be found and real fix implemented. This has caused me to doubt the stability of iCloud, so i will procees with caution.

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

Captivate 5 - issue with editing imported PowerPoints that have been resized

I'm having an issue with editing PowerPoint files that have been imported into Captivate 5 when they have been resized within the Captivate project after the initial import.
1. I import a PowerPoint presentation into 800x600 dimension.
2. I resize the project to 900x600 by not locking the aspect ratio and selecting to position to the top right so there is a 100 pixel strip to the left of the slide that we use for navigation buttons and other info.
3. If I need to make a change to a PowerPoint, I select Edit > Edit with Microsoft PowerPoint > Edit Slide (or Edit Presentation).
4. The slide opens in PowerPoint and I make the changes and click Save.
5. When the slide is imported back into Captivate, it is stretched and resized to not fit either 800x600 or 900x600, but something in between. This did not happen in Captivate 4 - the slide would retain the 800x600 dimension slid over to the right with no issues.
Are there any settings that can be done to ensure the edited slides will import back into the project with the correctly sized dimensions for the current project?

Hi there
I agree that it would be nice to see a notification. You know, Captivate offers a special area for notifications that appear when you open it. I'm stymied as to why Adobe doesn't use this area for making such announcements.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

HT4061 I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas? Does a totally dead battery have that effect? I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
Please help, thanks in advance all1

Hi eggroll77,
Welcome to Apple Support Communities.
That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
iOS: Restore errors 4005, 4013, and 4014
I hope this helps.
-Jason

Issue with Emoji icons when sent from iOS6 to iOS5

Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
Both iOS are the current version and the phones are 4S 64GB
Anybody got this problem

Hi!
What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
Regards,
Volker

Issue with transformation class when i have same first name and last name

Similar Messages

Maybe you are looking for