Issue with updation of PAN details in ESS after applying patch

Hi ,
We have applied a new patch recently,
as follows:
SAP_HR - To patch - 49
EA_HR - To Patch - 49
When users are trying to update PAN details it says throwing error " fill in the required fields,"
i tried to apply relevent note :1243216 , but iam not able to apply it as system says it cannot be implemeted.
Can any body come accross this issue please give me solution as this issue has become critical.
Thanks in advance .
Regards,
Evani

Duplicate post.
After applying patch , error found on bottom of signon screen
After applying patch , error found on bottom of signon screen

Similar Messages

Is apple going to fix the magic trackpad issue with Autocad zoom/pan soon? It only started happening when I updated to Yosemite

is apple going to fix the magic trackpad issue with Autocad zoom/pan soon?
It only started happening when I updated to Yosemite
I am using macbook pro 15" Retina

Although it not only bothers me but alot of other photo booth users aswell

URGENT HELP PLS : Issue with Multi Level Master Detail block

This is an issue someone else had posted in this forum few years back but there was no solution mentioned, I have run into this same issue , The problem is as explained below.
Any help on this is appreciated.
Scenario:
There are 3 Blocks in the form : A (Master Block)
: B (Detail of A )
: C (Detail of B )
There is master detail relation created between A and B and B and C. So initially when we query for a record in Master A, it shows all records properly in B and C.
Now if i navigate to the first record of B , and then second record of B , records corresponding to that record shows up properly in C block.
Till now everything works fine.
Issue 1:
But in case after querying initially on Master Block A,If I go directly to the second record of B block, it clears the whole B block and C block.
Issue 2:
Same thing happens if I am on C block ( corresponding to second record of B block) and then navigate to first record in B block , it again clears the whole B block and C block.
Please Help !!
Thanks !

Thanks Xem for Your reply , I tried those settings but it did not help..here is the original link that to the thread that talks about the same problem ,
Issue with Multi Level Master Detail block
The last update to this was the following :
"I figured out that this is happening because Block Status is set to 'Changed' and this is causing it to clear out the blocks.
But cant figure out why the status is setting to 'Changed' "
Any Help from the form Gurus on this form in this matter is truely appreicated !!
Thanks,
Zid.

Issue with Update of Table VARINUM

Hi,
I am getting waiting Issues with Update of table VARINUM. Has anybody faced such an issue.
I have a lot of Jobs which are running in background. I am submitting it through a report. what can be the issue.
Regards,
Abhishek jolly

Thisi is quite old, but not answered properly yet, so there you go:
SAP generates a new job and temporary variant on report RSDBSPJS, for each HTTP call,which creates database locks on table VARINUM .
This causes any heavyweight BSP application to hang and give timeout errors.
The problem is fixed applying OSS note 1791958, which is not included in any service pack.

Any other realtors having issues with updating their Suprakey on their Android?

Any other realtors having issues with updating their Suprakey on their Android?

The follow is from clicking on that error number in the article cited at the end of my post:
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
iOS: Resolving update and restore alert messages

Having issue with update Adobe 11.0.06. Error 1603.

Having issue with update Adobe 11.0.06. Error 1603.

You should have gotten this information with the error: "Shut down Microsoft Office and all web browsers. Then, in Acrobat or Reader, choose Help > Check for Updates. See also Error 1603 | Install | CS3, CS4 products." Also, be sure you log in as the administrator and disable anti-virus.

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ????

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ???? AT&T my DSL carrier suggests I get a new router. Apparently the one I have is really old and doesn't support my Macbook Pro. Does this sound right?

If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
One for entering into devices, computers etc for Internet Access Only.
You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
Also if you give out the password to another, they can't hack the network with the guest access password.
Computers remember the internet password, so anyone with access to your machines or network will have the password.
Since you have another Admin only password, they can't hack in. got it?
You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
Good luck.

Having issues with update to iOS 8

Having issues with update to iOS 8, wheel keeps spinning with 9 hrs remaining to complete update. What are my options?
<Re-Titled By Host>

I am a windows/mac user... And I was Linux user for several years... And so far I have been really happy with apple but this problem is frustrating.
I don't understand:
1)Why can't I go back to iOS7 since this was apparently the most stable version for my iPad ?
2) Why is apple not doing anything about it, ?
3) If the problem is that my iPad's can't fully support the features of iOS8, why on earth have they made it available to iPad 2?
Any way, I will just wait a bit longer and probably start looking in to a Samsung tablet or something....
Cheers,

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Issue with updating Security Info on my Microsoft ID

I am stuck in a vicious circle trying to sort an issue with my Microsoft account.
I need to remove an old, defunct, email address and add a load of new security info however, depending on whether the date format on the page I keep being directed to is UK or US, either the updates haven’t happened or they won’t
be happening until next month – which seems ridiculous!
I’m trying to sign up for a Windows Store developer account to publish a Windows 8 app. I’m using my MSDN subscription to register for this (for free) but there is a step I can’t get past because it insists on sending a code to
my old email address – to which I have no access. It is picking up this address from my Microsoft Account Security info – however, I updated this info weeks ago. This is the screen I see (I’ve blurred out some of it as it seemed foolish to publish all my security
info J
It says my old address will be removed on 03/04/2013 and my new info added on that same date. Does anyone know if this is UK date format 3rd April – in which case it’s a long wait or a US date 4th
March in which case it didn’t happen? I’ve tried phoning 5000 and the Microsoft Customer support lines but neither of them have a clue where to start. They just keep asking me if I’ve forgotten my password – which I haven’t.
Does anyone know how I can resolve this? My only option at the moment is to wait until 3rd of April and see if anything changes – which is not ideal.
Cheers,
Rob

Hello,
The Microsoft account forum has been retired and all account related questions must now be asked online
here.
Select the issue you need help with and fill out the requested details on the next page.
You need to be signed in with a Microsoft account to access the form. If you are unable to access your primary account, you can use an alternate account (if you have one) or create a new one at
https://signup.live.com
You can read further information about blocked accounts
here.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Issue with Home Address and Phone of ESS(data not getting saved)

Hi Everyone,
We have a issue with ESS HomeAddress and Phone. when we edit and save data, its showing a message that data is saved. but the data is not getting updated in the backend and the view also is showing old data only. Pleas help us, if anyone came across this type of issue.
Thanks & Regards,
Ravi

Please check the fields you are editing are not marked as unused in
V_T588M
V_T588MFPROPS
V_T588MFPROPC
Best wishes
Stuart

Issue with update of BOM by Variant Config - Cost relevant indicator

Hi All VC Expert,
We are facing an issue with the update by reference characteristic of the field STPO-SANKA Cost relevancy indicator on the BOM.
We are on SAP ECC 6.0 release 700 on Oracle
Hot Package
- SAPKA70015 on ERP Cross Application componenent
- SAPKH60013 on SAP-APPL Logistics and accouting
We are using material variant
We are on the first level of configuration
Classically, we built a procedure to set X to this data base field as below :
$self.STPO_SANKA = 'X'
We assigned this procedure to the relevant items
Here is the result we have:
At the creation of the Plan Order, this is not working
At the creation of the Prod Order, this is not working
When we do a Reload PP master data, this is working very well
On CU50/VA02 when we check the trace, the procedure is executed.
Do somebody have an idea or already facing this and solve it ?
Thanks in advance for your appreciated help.

Hi Fabien. Did you solve your problem?

Issue with update to 10.6.5 and WIFI connection

I have been having an ongoing issue with my MBP over the last 6 months and even more consistently within the last several weeks.
I have searched the other posts and I think that I might be making a connection here. So, please chime in if you have anything to add to solving or addressing my problem as I think that there are others out there suffering.
Issue in short: Waking my MBP from sleep mode or turning it on loses my connection to my WIFI that is password protected.
Mainly when I wake my MBP from sleep mode this occurs a lot.
I have contacted AppleCare many times and have taken my computer to the Genius guys and I have done the following:::
Genius guys tested the computer and could not replicate. No hardware issues found, must be a software issue.
AppleCare, done many things to reset the computer, re-installed Snow Leopard, deleted Caches and other things.
Now, I am wondering if there is something actually due to the OS updates after 10.6.2 or 10.6.3 that is causing my issue that much more.
I can see my wireless router as available to join, I select it, type in my password, and it states invalid password. Try to restart, reboot, and nothing. It almost appears that it loses the sync between my keychain and such.
As of late, as I stated, the problem is more persistent now.
What do you think? An issue with the latest updates of 10.6.5?

I too often have a devil of a time connecting to a Linksys WiFi router with a brand-new unibody MacBook Pro 15", 2.66GHz. I noticed that if I boot the machine off an external Firewire drive this seems to be more of an issue than if I boot off the internal drive.
I beginning to thing there's some kind of interference between the Firewire system and the WiFi system.
The router is a Linksys with the latest firmware update. My MacBook and iPhone 3G, iPhone 4 connect to the router fine.

Performence issue with Update

hi all,
I am facing issue with below update statemetn. taking huge time to update. in xx__TEMP table I have index on Project id column. and all underlying table hase index.
Please look into plan and let me how I can reduce Cost for the blow update statement.
Thanks in advance.
UPDATE dg2.ODS_PROJ_INFO_LOOKUP_TEMP o
SET Months_In_Stage_Cnt =
(SELECT
NVL(ROUND(MONTHS_BETWEEN(SYSDATE,x.project_event_actual_date),2),0) Months_In_Stage_Cnt
FROM od.project_event x
WHERE x.project_id = o.project_id
AND event_category_code = 'G'
AND project_event_seq_nbr =
(SELECT MAX(project_event_seq_nbr)
FROM od.project_event y
WHERE y.project_id = x.project_id
AND y.event_category_code = 'G'
AND y.project_event_actual_date IS NOT NULL
AND stage_nbr <> 0
AND y.project_event_seq_nbr <
(SELECT project_event_seq_nbr
FROM od.project_event z
WHERE stage_nbr =
(SELECT current_stage_nbr
FROM od.project
WHERE project_id = x.project_Id )
AND z.project_id = x.project_Id
AND z.event_category_code = 'G'
AND skip_stage_ind = 'N'
AND project_event_actual_date IS NULL )
Plan
UPDATE STATEMENT CHOOSECost: *1,195,213* Bytes: 71,710,620 Cardinality: 41,213
14 UPDATE DG2.ODS_PROJ_INFO_LOOKUP_TEMP
1 TABLE ACCESS FULL TABLE DG2.ODS_PROJ_INFO_LOOKUP_TEMP Cost: 36 Bytes: 71,710,620 Cardinality: 41,213
13 FILTER
3 TABLE ACCESS BY INDEX ROWID TABLE OD.PROJECT_EVENT Cost: 9 Bytes: 104 Cardinality: 8
2 INDEX RANGE SCAN INDEX (UNIQUE) od.XPKPROJECT_EVENT Cost: 3 Cardinality: 8
12 SORT AGGREGATE Bytes: 16 Cardinality: 1
11 FILTER
5 TABLE ACCESS BY INDEX ROWID TABLE od.PROJECT_EVENT Cost: 9 Bytes: 16 Cardinality: 1
4 INDEX RANGE SCAN INDEX (UNIQUE) od.XPKPROJECT_EVENT Cost: 3 Cardinality: 8
10 FILTER
7 TABLE ACCESS BY INDEX ROWID TABLE od.PROJECT_EVENT Cost: 9 Bytes: 108 Cardinality: 6
6 INDEX RANGE SCAN INDEX (UNIQUE) od.XPKPROJECT_EVENT Cost: 3 Cardinality: 8
9 TABLE ACCESS BY INDEX ROWID TABLE od.PROJECT Cost: 2 Bytes: 9 Cardinality: 1
8 INDEX UNIQUE SCAN INDEX (UNIQUE) od.XPKPROJECT Cost: 1 Cardinality: 1
Thanks
Deb

882134 wrote:
Can any body give me some light why upto Select statement cost is ok, but only Update statemet is take huge 11m costing.
thanks
DebOkay so completely ignore the content of the 2 forum posts.
Why is the cost an issue for you? Without your tables, data and environment, and without a readable execution plan it's difficult to help you.
Maybe you could read the link I gave you and post some of the information it talks about up here.
p.s. read the link.

Issue with updating partitioned table

Hi,
Anyone seen this bug with updating partitioned tables.
Its very esoteric - its occurs when we update a partitioned table using a join to a temp table (not non-temp table) when the join has multiple joins and you're updating the partitoned column that isn't the first column in the primary key and the table contains a bit field. We've tried changing just one of these features and the bug disappears.
We've tested this on 15.5 and 15.7 SP122 and the error occurs in both of them.
Here's the test case - it does the same operation of a partitioned table and a non-partitioned table, but the partitioned table shows and error of "Attempt to insert duplicate key row in object 'partitioned' with unique index 'pk'".
I'd be interested if anyone has seen this and has a version of Sybase without the issue.
Unfortunately when it happens on a replicated table - it takes down rep server.
CREATE TABLE #table1
 ( PK char(8) null,
 FileDate date,
 changed bit
CREATE TABLE partitioned (
PK char(8) NOT NULL,
ValidFrom date DEFAULT current_date() NOT NULL,
ValidTo date DEFAULT '31-Dec-9999' NOT NULL
LOCK DATAROWS
PARTITION BY RANGE (ValidTo)
( p2014 VALUES <= ('20141231') ON [default],
p2015 VALUES <= ('20151231') ON [default],
pMAX VALUES <= (MAX) ON [default]
CREATE UNIQUE CLUSTERED INDEX pk
ON partitioned(PK, ValidFrom, ValidTo)
LOCAL INDEX
CREATE TABLE unpartitioned (
PK char(8) NOT NULL,
ValidFrom date DEFAULT current_date() NOT NULL,
ValidTo date DEFAULT '31-Dec-9999' NOT NULL,
LOCK DATAROWS
CREATE UNIQUE CLUSTERED INDEX pk
ON unpartitioned(PK, ValidFrom, ValidTo)
insert partitioned
select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
insert unpartitioned
select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
insert #table1
select "ET00jPzh", "Jan 15 2015", 1
union all
select "ET00jPzh", "Jan 15 2015", 1
go
update partitioned
set ValidTo = dateadd(dd,-1,FileDate)
from #table1 t
inner join partitioned p on (p.PK = t.PK)
where p.ValidTo = '99991231'
and t.changed = 1
go
update unpartitioned
set ValidTo = dateadd(dd,-1,FileDate)
from #table1 t
inner join unpartitioned u on (u.PK = t.PK)
where u.ValidTo = '99991231'
and t.changed = 1
go
drop table #table1
go
drop table partitioned
drop table unpartitioned
go

wrt to replication - it is a bit unclear as not enough information has been stated to point out what happened. I also am not sure that your DBA's are accurately telling you what happened - and may have made the problem worse by not knowing themselves what to do - e.g. 'losing' the log points to fact that someone doesn't know what they should. You can *always* disable the replication secondary truncation point and resync a standby system, so claims about 'losing' the log are a bit strange to be making.
wrt to ASE versions, I suspect if there are any differences, it may have to do with endian-ness and not the version of ASE itself. There may be other factors.....but I would suggest the best thing would be to open a separate message/case on it.
Adaptive Server Enterprise/15.7/EBF 23010 SMP SP130 /P/X64/Windows Server/ase157sp13x/3819/64-bit/OPT/Fri Aug 22 22:28:21 2014:
-- testing with tinyint
1> use demo_db
1>
2> CREATE TABLE #table1
3> ( PK char(8) null,
4> FileDate date,
5> -- changed bit
6> changed tinyint
7> )
8>
9> CREATE TABLE partitioned (
10> PK char(8) NOT NULL,
11> ValidFrom date DEFAULT current_date() NOT NULL,
12> ValidTo date DEFAULT '31-Dec-9999' NOT NULL
13> )
14>
15> LOCK DATAROWS
16> PARTITION BY RANGE (ValidTo)
17> ( p2014 VALUES <= ('20141231') ON [default],
18> p2015 VALUES <= ('20151231') ON [default],
19> pMAX VALUES <= (MAX) ON [default]
20> )
21>
22> CREATE UNIQUE CLUSTERED INDEX pk
23> ON partitioned(PK, ValidFrom, ValidTo)
24> LOCAL INDEX
25>
26> CREATE TABLE unpartitioned (
27> PK char(8) NOT NULL,
28> ValidFrom date DEFAULT current_date() NOT NULL,
29> ValidTo date DEFAULT '31-Dec-9999' NOT NULL,
30> )
31> LOCK DATAROWS
32>
33> CREATE UNIQUE CLUSTERED INDEX pk
34> ON unpartitioned(PK, ValidFrom, ValidTo)
35>
36> insert partitioned
37> select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
38>
39> insert unpartitioned
40> select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
41>
42> insert #table1
43> select "ET00jPzh", "Jan 15 2015", 1
44> union all
45> select "ET00jPzh", "Jan 15 2015", 1
(1 row affected)
(1 row affected)
(2 rows affected)
1>
2> update partitioned
3> set ValidTo = dateadd(dd,-1,FileDate)
4> from #table1 t
5> inner join partitioned p on (p.PK = t.PK)
6> where p.ValidTo = '99991231'
7> and t.changed = 1
Msg 2601, Level 14, State 6:
Server 'PHILLY_ASE', Line 2:
Attempt to insert duplicate key row in object 'partitioned' with unique index 'pk'
Command has been aborted.
(0 rows affected)
1>
2> update unpartitioned
3> set ValidTo = dateadd(dd,-1,FileDate)
4> from #table1 t
5> inner join unpartitioned u on (u.PK = t.PK)
6> where u.ValidTo = '99991231'
7> and t.changed = 1
(1 row affected)
1>
2> drop table #table1
1>
2> drop table partitioned
3> drop table unpartitioned
-- duplicating with 'int'
1> use demo_db
1>
2> CREATE TABLE #table1
3> ( PK char(8) null,
4> FileDate date,
5> -- changed bit
6> changed int
7> )
8>
9> CREATE TABLE partitioned (
10> PK char(8) NOT NULL,
11> ValidFrom date DEFAULT current_date() NOT NULL,
12> ValidTo date DEFAULT '31-Dec-9999' NOT NULL
13> )
14>
15> LOCK DATAROWS
16> PARTITION BY RANGE (ValidTo)
17> ( p2014 VALUES <= ('20141231') ON [default],
18> p2015 VALUES <= ('20151231') ON [default],
19> pMAX VALUES <= (MAX) ON [default]
20> )
21>
22> CREATE UNIQUE CLUSTERED INDEX pk
23> ON partitioned(PK, ValidFrom, ValidTo)
24> LOCAL INDEX
25>
26> CREATE TABLE unpartitioned (
27> PK char(8) NOT NULL,
28> ValidFrom date DEFAULT current_date() NOT NULL,
29> ValidTo date DEFAULT '31-Dec-9999' NOT NULL,
30> )
31> LOCK DATAROWS
32>
33> CREATE UNIQUE CLUSTERED INDEX pk
34> ON unpartitioned(PK, ValidFrom, ValidTo)
35>
36> insert partitioned
37> select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
38>
39> insert unpartitioned
40> select "ET00jPzh", "Jan 7 2015", "Dec 31 9999"
41>
42> insert #table1
43> select "ET00jPzh", "Jan 15 2015", 1
44> union all
45> select "ET00jPzh", "Jan 15 2015", 1
(1 row affected)
(1 row affected)
(2 rows affected)
1>
2> update partitioned
3> set ValidTo = dateadd(dd,-1,FileDate)
4> from #table1 t
5> inner join partitioned p on (p.PK = t.PK)
6> where p.ValidTo = '99991231'
7> and t.changed = 1
Msg 2601, Level 14, State 6:
Server 'PHILLY_ASE', Line 2:
Attempt to insert duplicate key row in object 'partitioned' with unique index 'pk'
Command has been aborted.
(0 rows affected)
1>
2> update unpartitioned
3> set ValidTo = dateadd(dd,-1,FileDate)
4> from #table1 t
5> inner join unpartitioned u on (u.PK = t.PK)
6> where u.ValidTo = '99991231'
7> and t.changed = 1
(1 row affected)
1>
2> drop table #table1
1>
2> drop table partitioned
3> drop table unpartitioned

Issue with updation of PAN details in ESS after applying patch

Similar Messages

Maybe you are looking for