Issue with xfa.event.change in XFA 3.3

HI all
I've found an issue with the way that XFA 3.3 processes the script below on a change event when a user paste's more than 1 character to a textfield.
var sChange = xfa.event.change;
if((sChange.length>1)){
    app.alert("Bad User\nCopy and paste has been disabled for this field");
    //discard the change
    xfa.event.change = "";
in XFA 3.0 the alert is sent and change is removed, in XFA 3.3 the alert is sent but the change persists.
Any Ideas?

Hi Mark,
Unfortunately thats not possible as I'm using Flash Fields with data being passed between the PDF and the Flex app which only works in XFA3.3, let me know when its fixed.
Kind Regards
Kevin Mortimer
Solutions Archtect
Avoka

Similar Messages

Issue with applying Event Action filters

Dear friends,
A general question on Event Action filters. There is a signature with sig ID 6257.
The following is the event action filter configuration:
service event-action-rules rules0
filters edit DHCP
signature-id-range 6257
subsignature-id-range 0
attacker-address-range 172.20.20.10,172.20.20.11
actions-to-remove produce-alert
filter-item-status Enabled
stop-on-match True
os-relevance not-relevant
exit
Even though a valid DHCP offer is being given by the DHCP server, this alert is getting fired.
We have even excluded the IP's of the DHCP Servers - 172.20.20.10 and 172.20.20.11 from the Attacker Address range parameter in the signature but still this alert gets fired.
evIdsAlert: eventId=1204853641442197329 vendor=Cisco severity=low
originator:
hostId: IDSM2Core1
appName: sensorApp
appInstanceId: 592
time: April 7, 2008 5:46:48 AM UTC offset=180 timeZone=1
signature: description=DHCP Client DoS id=6257 version=S316
subsigId: 0
sigDetails: Server Offered a Malicious IP Address
marsCategory: DoS/Host
interfaceGroup: vs0
vlan: 200
participants:
attacker:
addr: 172.20.20.10 locality=OUT
port: 0
target:
addr: 10.1.1.78 locality=OUT
port: 0
os: idSource=unknown type=unknown relevance=unknown
summary: 4 final=true initialAlert=1204853641442197267 summaryType=Regular
alertDetails: Regular Summary: 4 events this interval ;
riskRatingValue: 25 targetValueRating=medium
threatRatingValue: 25
interface: ge0_7
protocol: udp
Looking forward to your kind help and advise on this.
Thanks a lot
Gautam

Some things to check:
1) Is the filter in the active list? Filters can be enabled or disabled, but they can also be active ro inactive. You've only show a part of your configuration so I can't tell if the filter is part of the active list.
2) Are there actions other than produce-alert for the signature? Or is an event action override adding other actions?
Produce-alert is not the only action that can cause an alert to be generated. The produce-verbose-alert, request-snmp-trap, log-attacker-packets, log-victim-packet, and log-pair-packets will also cause alerts to be generated. Modify the filter to also remove these actions.
3) The alert you've shown is a Summary Alert. There may be an issue with Summarization and the Filters. Try modifying the signature to set it to FireAll with no summarization.
4) If you have multiple filters then check the order of the filters. If the event is matching an earlier filter where the stop-on-match is set to True, then it will not check the event against this filter. Either move this filter up higher in the filter list, or change earlier filters to be "stop-on-match false".
5) Also check to see if you are running the latest 5.1(7) or 6.0(4) Service pack. If running earlier 5.1 or 6.0 versions you might be hitting a bug that could have already been fixed.
If none of the above help, then contact the TAC. It could be that you may have foung a bug that the sensor development team is unaware of.
To help in identifying the problem take a packet capture of the packets from 172.20.20.10 for several minutes around the time when the sensor is generating these alerts.
This way the team can both check if the signature is firing correctly, and if the filters are working correctly for that signature.

Issue with Terminating Event - Reg

hi Gurus,
This might be a simple issue, but am not getting hold on a simple solution for my issue.
I'm working on ECC 6.0.
I have a custom workflow in which I have step1(A dialog task - Asynch) with a terminating event "COMPLETED" and then step 2 (A background task). once step1 is completed by user A, i am sending this WIACTUAL_AGENT to the step 2 in modifying some custom table data.
My issue is if user A finished the task(step 1) manually, then also the Term. event COMPLETED is getting triggered and hence the work item in user A's Inbox is disappearing. And then it's picking up user A as WIACTUAL_AGENT and sending to step 2. But, i need to distinguish or some how find out if the Termin. event occurred thru' execution of the workitem or manually performing the job. I looked into the workflow log for both the cases, and i don't find any clue with which i can differentiate that the Termin. event occurred thru' executing witem Vs. performing manually.
Anybody has any idea on how to find this out. Coz, depending on whether the action is done manually or thru' witem, i 'll be modifying the custom table data accordingly. Currently, for both the cases, when the Term. event occurs, the WIACTUAL_AGENT is same user A and hence it always is treating that the action is done thru' witem only, even though its done manually. This is because, when executed manually also, the step1 witem is ending with container element WIACTUAL_AGENT filled with user A and hence its proceeding with background task in step 2.
Any thoughts on how to tackle this issue. Your suggestions / input is really appreciated.
Thank you in advance. Pl let m

Hi Venu,
I have quickly created a sample workflow in my system.
Here is what I did:
1) Workflow will tigger to my inbox whenever Change master is created.
2) Created a custom task with object type ECM and method 'EDIT' with termination event 'Deleted'.
3) created fork step type with 2 branches and necessary branches 01.
4) one branch will execute the task created above
5) another branch will wait for the event "Deleted" of ECM
6) I have created a container element flag ( of type XFELD ).
7) In the wait event binding I am passing X to worklfow container element flag.
7) I have created change master from transaction CC01.
8) Received the worklfow and deleted the document via worklfow.
9) I checked the worklfow log and found that the flag container element is not populated
10) I have created one more change master from transaction CC01.
11) Received the worklfow but deleted the document outside the workflow.
12) I checked the worklfow log and found that the flag container element is populated with 'X' this time.
I think you can use that flag to differntiate whether the transaction was done outside worklfow or within the workflow.
Hope this helps.
Thanks.
Krishna.

Issues with Purchase order change documents

Hi Gurus,
I have some peculiar issues with Purchase order. The PO line item has deletion indicator set but I can't find who set the deletion indicator. The PO change documents doesn't show anything related to deletion indicator.
Please help to fix the Issue.
Regards,
Senthil

Hi
Check it in Tcode SE16
Table Name CDHDR and CDPOS
Regards,
Raman

Having issues with trying to change style in Robo11

Having an issue with Robo11 allowing me to change a style in a topic (document imported from Word) that already exist in the style css. Robo allows me to scroll down, but immediately jumps back to the top. This has only occured on 4-5 projects out of over 50 projects. Have tried more than one way to change style, but continues to jump to top of style type list.

Can you try the styles and formatting pod instead? (View > Pods > Styles and Formatting) Can you assign the style through that?

How can I get around Javascipt issue with keyboard events?

Javascript issue: keydown, keypress, keyup events cause quick search to initiate with the division key on the keypad and slash key on the keyboard. I am trying to program a graphic representation of a 10 key pad and the division (/) sign is problematic for roll over and processing based on key events. How can I get around this? further notes: Safari also has problems with key events and the division key(s) but no search function connected. Thankyou for time and attention

A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25

Issues with XFA to HTML5 Convertion in Livecycle ES4

We are working on the feasibility check for rendering the dynamic XFA form within our application to enable end user to fill-in and save the form. We used LiveCycle Designer ES4 for designing the forms. Everything works fine with the PC but when tried to load in iPad the form didn’t load at all.
We tried LiveCycle ES4 to convert the file to HTML5 to render in iPad. But it doesn’t look neat as PDF. Listed below the issues we are facing.
1.       Data binding not working for few columns though it works perfectly in PDF version
2.      Tables are not aligned properly based on the number of rows, the following table/controls getting overlapped on the table.
3.      Submit button takes the page to WebAPI (used for Saving the entered form) url instead of saving the content. When invoked from the PDF it saves properly.
Please provide any standards/guidelines for designing the document which will be converted to HTML5 correctly.
Also, we would like to know the pricing of LiveCycle ES4 and is there any lightweight mode available which just does the XFA to HTML5 conversion. The LifeCycle ES4 comes with distributable license?
Regards, Jawahar

LiveCycle is divided into separate products such as LiveCycle Forms, LiveCycle Output, LiveCycle Rights Management and many more. You may choose the suitable forum from the product list here: Adobe LiveCycle
Good luck!

Issues with XFA to HTML5 Convertion in Livecycle server

We are working on the feasibility check for rendering the dynamic XFA form within our application to enable end user to fill-in and save the form. We used LiveCycle Designer ES4 for designing the forms. Everything works fine with the PC but when tried to load in iPad the form didn’t load at all.
We tried LiveCycle server to convert the file to HTML5 to render in iPad. But it doesn’t look neat as PDF. Listed below the issues we are facing.
1.       Data binding not working for few columns though it works perfectly in PDF version
2.       Tables are not aligned properly based on the number of rows, the following table/controls getting overlapped on the table.
3.       Submit button takes the page to WebAPI (used for Saving the entered form) url instead of saving the content. When invoked from the PDF it saves properly.
Please provide any standard/guidelines for designing the document which will be converted to HTML5 correctly.
Also, we would like to know the pricing of LiveCycle server and is there any lightweight server mode available which just does the XFA to HTML5 conversion. The LifeCycle server comes with distributable license?
Regards, Jawahar

LiveCycle is divided into separate products such as LiveCycle Forms, LiveCycle Output, LiveCycle Rights Management and many more. You may choose the suitable forum from the product list here: Adobe LiveCycle
Good luck!

Having issue with Syncing Events from Iphoto to Apple Tv

All of a sudden I have multiple events of the same title but different amount of photos when i try to sync my photos to apple tv. Iphoto is fine, nothing is changed but when I go over to itunes to sync I see like 10 different Events with same name. EVERYTHING is multiplied but there is no rhyme or reason to it. !!!!! Apple has done some system/app updates but they are so frequent that I don't ever pay attention to what is being updated I just click to allow the process. I believe this occurred after one of the updates, I have 2 Apple TV's AT1 and AT2. AT2 is a nightmare to begin with because it was constantly getting kicked off the network but now that isn't the issue. Now it isn't showing current syncs which doesn't make sense because I thought this one streamed everything directly. Either way---APPLE TV is having issues and I can't get my EVENTS straightened out, HELP!!!!!

I've also noticed this started happening... Its something with iTunes, because both my old Apple TV's and my iPhone and iPad all show multiple events for the same event... Lots of them! So many its hard to tell what to sync now. When I click on any of my devices photos tab in iTunes they are all exactly the same. Not sure how to fix it...

HR - Daily Snapshot Issues with Future Dated Changes

The w_employee_daily_snp_f_1 table has timing issues. The effective end date on all per_all_assignments_f, per_all_people_f, etc always shows the time at midnight. For example: 08/14/2009 12:00:00 AM. When this person has a new assignment, for one day only, the extract does not pick up this person. See example below:
Employee 123 has a supervisor change and the new supervisor is effective on 6/15/2009
Emp Eff Start Date Eff End Date Supervisor
123 01/01/2009 12:00:00 AM 06/14/2009 12:00:00 AM 888
123 06/15/2009 12:00:00 AM 12/31/4712 12:00:00 AM 555
When the ETL runs on the night of 6/14/09 at 7:35:42 PM, this record does not get picked up because according to the apps.per_all_assignments_f table on the day of 6/14/09 this person does not have an active assignment. There is one day when the person (according to the system) does not have a supervisor. The next night, on 6/15/09 10:34:18 PM the record reappears and does so every night until the assignment record is again end dated. This only occurs for future dated HR changes.
This is a big problem because if the future dated change is for a supervisor, not only does the supervisor not appear in the daily snapshot, but either does any of his/her subordinates. Has anyone else run into this problem? How did you solve it? Did you customize all the HR mappings?

Have posted an updated version of the MST to my webspace here:
http://homepage.ntlworld.com/minkus/shockwave/shockwave115606mst2.zip
This new version fixes the following issues (changes to this version in bold):
MsiInstaller repair & errors on first run as non-admin (removes 'AppData' directory entries)
DCOM errors once Shockwave is installed (adds double quotes to the beginnning of LocalServer32 value)
Incorrect TypeLib paths in the registry (fixed to use built-in [SystemFolder] property)
Default CLSID description value missing (set to 'Shockwave ActiveX Control', as per the executable installer)
Incorrect Shockwave 10 paths in the registry (fixed to use built-in [SystemFolder] property)
Misspelt 'OptionalComponets' registry key (renamed to 'OptionalComponents')
Missing .dcr, .dir, .dxr Content Type registry values (included in the executable installer)
Fixed incorrect AppID registry key (set to use installer's [VERSION] variable)
Removed 'Launch SWDNLD.exe' shortcut created in Programs subfolder (people don't want this - see here)
I have tested this on my network and it all seems to work fine. Unfortunately my original plan to use the executable installer didn't work out as it does not include the Shockwave 10 compatibility components described here and here, so it looks like I'll have to keep this MST file up to date with the latest versions until Adobe fix the problems themselves...
If you want to see the changes that I have made, load up Adobe's 11.5.6.606 MSI file in Orca, then use Transform / Apply Transform to apply the MST, and look for the entries in green.
Please post any feedback to this thread, and I will try to respond if I can help!
Chris Hill

Table - Issue with Logging Data Changes

Hi Experts,
My client's requirement is to log data changes happened in a table which is critical. I've selected 'Log data changes' check box in technical settings of the table. Now, I'm able to see log for all the changes i did after that. But, I'm facing following issues. Kindly help me in fixing the same.
1. The table is having two fields with same data element. In the change log SCU3, under the field name, field label mentioned in the data element is getting displayed. As, the data element is same for two fields, its difficult to find out which particular field is changed. Is there any way to display table field name instead of field label from data element?
2. Sometime, even there is change in the data record, I'm able to see a log record in the change log with caption 'Data record unchanged'. What might be the problem and how to resolve?
Thanks in Advance,
Siva Sankar.

Hi Moha Nan,
You just use ABAP to change the table P? In this way I think it is not change to X table.
You can upload master data to add navigation,it is a good way to bulid the SID of P table and X
table .
Hope it is help to you!

PO Form Issue with Header Level Changes

Issue:
It has been observed that whenever changes are done in PO Header (e.g. Header Text), system prints Billing Address and Communications Details as blank. If the changes are made to Line Item level along with header then system prints the Billing address and Communication Details correctly.
Analyse:
we are using the SELECT statement below to fetch the field for
Billing Address and Communications Details.
SELECT SINGLE
mandt z_plant z_company_code z_toll_free_no z_local_no z_fax_no
z_email z_name1 z_name2 z_street z_house_no z_district z_post_code
z_city z_country z_vat_no z_loc_term_cond z_langu
FROM zptp_poformdata
INTO w_poformdata
WHERE z_plant = ls_ekpo-werks
AND z_company_code = ls_ekpo-bukrs .
And when we only change the header level data no value is passing for comany code and plant . as a result Select statement gets failed and we are getting blank window.
NOTE: we are getting blank box only when we fire a print or fax.The preview is coming fine.

by asking so many questions in a single post,you are violating the rule of engagement given below
Only One Question Per Posting
For each question that you have, make a separate posting. Don't ask multiple questions in one posting, this is confusing for people and might not get answered, since the subject line does not reflect all your problems. If a new and unrelated question comes up during a thread, start a new thread.

Issues with Master Data Change Run after upgrade 7.3.1

We have upgraded to 7.3.1 on both our BW and ECC clients. When we first run out change run in BW it chose to drop and rebuild aggregates
on changes that usually don't cause a drop and rebuild. They usually do a delta.
Has anyone had this issue once upgraded?
We looked at our performance setting in SPRO for aggregates and the settings have not changed.

I loaded data for 0Material, 4 fields are not getting populated....when I checked in R/3 base table and RSA3, I am able to see data for those 4 fields. But in PSA and 0MATERIAL I am not seeing data for those fields.
THose 4 fields are Z fields mapped to Standard fields in MARA table.
As you say you can see the values of these fields in RSA3, We can rule out that the fields arent hidden. Check the mapping on the BI side, do you have all the Zinfoobjects added to the Omaterial and the corresponding mapping of source fields to target fields.
0CUSTOMER_ATTR has some data...I added new field in datasource as well as in BW also. After creating transformation I executed the DTP, it is throwing same error in every data package
"Record filtered in advance as error records with the same key exist".
Load till PSA is Init with data transfer and DTP is delta.
there are some duplicate records in the master data values that are coming in. You can manually change them in PSA and load. And if you are sure the duplicated records can be dropped, you can tick the HANDLE DUPLICATE RECORDS in DTP - update tab

Issue with BUS2105 events

Hi,
I have Custom workflow and Business Object for BUS2105. It is working fine and generating and email notification for next user to take a decision on the PR. Now, the issue is when a user cancel the one release steps two events are getting triggered (RELEASESTEPCREATED & SIGNIFICANTLYCHANGED). To handle this i have used these two events (RELEASESTEPCREATED & SIGNIFICANTLYCHANGED) in Basic data of the workflow. And I have used the Fork to handle these events 1 to run the normal business logic and other to send email notification to notify the PR is step is cancelled. In this email notify I have used the wait step to wait for the event SIGNIFICANTLYCHANGED. But the workflow is just executing the business process and workflow is completed.
Could you please let me know the how to handle this situation.
Thanks,
Sriram POnna.

Hello,
Define SIGNIFICANTLYCHANGED as a terminating event for your workflow.
regards
Rick Bakker
hanabi technology

Issue with Master data change workflow in GRC PC 10.1

Hi,
I have configured the work flow for master data changes in GRC PC 10.1, however approver is not able to view the request in inbox where are the organization owner is able to see the review for change request in inbox.
Please let me know if there is any config where we need to set the approvers for workflow, so that the system creates a request for approver.
Regards,
Giridhar

Dear Giridhar,
Please, check the following configuration:
1. Activate the workflow (Path: SPRO -> GRC -> Shared Master Data Settings -> Activate Master Data Changes)
2. See whether Checkbox "Approval" is ticked for the selected entity
3. If you activate master data changes, please check whether the correct roles are indicated in the Maintain Custom Agent Determination Rules in the Workflow settings.
Business Event: 0FN_MDCHG_APPR
Role: Select the role you gave to the approver
After performing this configuration, a task must appear in the work inbox.
Best Regards,
Fernando

Issue with xfa.event.change in XFA 3.3

Similar Messages

Maybe you are looking for