"issuer is not on the Partner list" and error in the documentation

This hung me up for quite a while today, so I'm contributing this to save someone else a headache down the road. I was trying to get the Browser/POST scenario in the SAML SSO sample to work ($AM_HOME/samples/saml/sso) , and was forever getting this message in the debug file 'amSAML':
ERROR: verifyAsserti onAndGetSSMap: issuer is not on the Partner list.
I had the keystore set up correctly on the issuing partner site, and all the "Trusted Partner" settings configured correctly per the sample instructions and the 2005Q4 Federation & SAML Administration Guide. Among those instructions is this for the Issuer field (Section 9: SAML Attributes -> ... -> To Configure a Trusted Partner):
Issuer
The creator of a generated assertion. The default syntax is hostname:port.
Well, that's not exactly true.... I found by trial and error that the value must match the value of the "Issuer" attribute in the Assertion nodes generated by the partner, i.e. http://hostname:port. Everything worked nicely once I made that change.
So, if this sounds like your issue (assuming you found this via a Google or Sun forum search), I hope I saved you some headaches.
thanks,
- Kevin

I've learned a bit more since my original post....
To clarify, the "issuer" field needs to match the issuer in the assertion that SAMLPOSTProfileServlet receives from the trusted partner.
Also, I found that Access Manager's SAMLPOSTProfileServlet behaves differently between the Linux and Windows versions when sending outbound posts to another SAML server. From the Linux install, it sends "hostname:port"; from Windows, it sends "http://hostname:port".
The original post was after getting the Windows AM -> Linux AM demo_postprofile test to work; this follow up follows getting Linux AM -> Windows AM to work for the same test.
thanks,
- Kevin

Similar Messages

How to autogenrate multiple items report of the SharePoint list and sent to the client id on daily basis

Dear Support,
As per customer requirement he want to send SharePoint list multiple items reports on daily basis by email autognrated workflow in SharePoint.
I tried for that and created workflow for SharePoint list on new item creation using SharePoint designer 2013 it’s working fine. But I am unable to send list multiple items report by work flow.
Please let me know the process for SharePoint list multiple items report generation and how to sent mail to the client id on daily basis.
Would request your support.

Hi
another approach
use a powershell scheduled script which will get needed lists items, adn will sned the infos by email
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Function module for getting the partner details and Classifications

Hi,
Can any one tell me FMs for getting the Partner Details and for getting the characteristics associated with an equipment??
Thanks

Hi Anu,
are you talking about the SAP Business Partner???
Well, if yes, then just check the FM 'BAPI_BUPA_CENTRAL_GETDETAIL'.
Or just search for oher FMs with BAPI_BUPA*.
Hope this helps...
Ciao Bernhard

Inspection lot not updated with Task list and sample

Hi,
I have created a quality plant and assigned the MICs. When I am trying to Process the quality lot which is created automatically through QA32, I got an error, ,No inspection plan could be found'
When i create an inspection lot system is picking up the Task list and picking up the Sample size.
Please provide some light on this.

Hello Kumar,
Check each and every point given in below document and come up with your observations.
I presume Inspection lot status consists CRTD.
Inspection lots with CRTD status- Causes and Remedies - Product Lifecycle Management - SCN Wiki
Amol.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

An odd workaround: click "Always" in System Preferences/General/Show scroll bars. The scroll bars will always show, but they won't cover your last file.
See this other post: https://discussions.apple.com/message/20572471#20572471

Why the scan lister and listener configure/start from GRID home why not from Oracle Home.

Hi
why the scan lister and listener configure/start from GRID home why not from Oracle Home.

> why the scan lister and listener configure/start from GRID home why not from Oracle Home.
Because Oracle says that's the way it has to be.
As @MohaAGOU said, starting in 11gR2, the Listeners (both SCAN and traditional) are now cluster resources. Let's start with the SCAN Listener. There are only 3 of them, even if you have 4 or more nodes in the cluster. If a node goes down and a SCAN Listener were running on it, Grid Infrastructure will relocate the SCAN Listener to a surviving node. Much easier to do this if the entire resource were in the GI home. Note that an instance cannot be relocated and it is running on a different home.
As for the traditional listener. The Listener itself won't be relocated during a node termination, but its VIP will.
Cheers,
Brian

Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but p

Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but part two is not. Why?????

How is your iPod configured to sync music from your iTunes library? In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
B-rock

Adding button in the secondary list and alv grid

Hi all ,
            i have devloped an alv grid interactive report as below, my problem is i want to add some button in the secondary list and do some interactions. but i dont know how to do that. i m sending u my code below ,,, plzz suggest what can be done do add that.
<code>
*& Report Z_demo_SALESDOC
REPORT z_demo_salesdoc.
TABLES: vbak, vbap.
TYPE-POOLS:slis.
DATA: BEGIN OF it_vbak OCCURS 0,
       vbeln TYPE vbak-vbeln,
       ernam TYPE vbak-ernam,
       erdat TYPE vbak-erdat,
       auart TYPE vbak-auart,
       END OF it_vbak.
DATA: BEGIN OF it_vbap OCCURS 0,
       vbeln TYPE vbap-vbeln,
       posnr TYPE vbap-vbeln,
       matnr TYPE vbap-matnr,
       zmeng TYPE vbap-zmeng,
       netwr TYPE vbap-netwr,
       END OF it_vbap.
DATA:it_event TYPE slis_t_event.
DATA: t_field TYPE slis_t_fieldcat_alv,
      w_field TYPE slis_fieldcat_alv,
      t_field1 TYPE slis_t_fieldcat_alv,
      w_field1 TYPE slis_fieldcat_alv,
      w_layout TYPE slis_layout_alv,
      t_sort TYPE slis_t_sortinfo_alv,
      w_sort TYPE slis_sortinfo_alv.
CONSTANTS: c_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
           c_usercommand TYPE slis_formname VALUE 'USER_COMMAND'.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln MODIF ID m1,
                s_erdat FOR vbak-erdat MODIF ID m2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
PARAMETERS:rb1 RADIOBUTTON GROUP g1 USER-COMMAND us1,
           rb2 RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN OUTPUT.
IF rb1 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1    = 'M1'.
     IF screen-name    CS 'S_VBELN'.
        screen-active    = '0'.
       screen-input     = '0'.
      screen-output    = '0'.
      screen-invisible = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
IF rb2 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1    = 'M2'.
        screen-active    = '0'.
       screen-input     = '0'.
      screen-output    = '0'.
      screen-invisible = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN.
DATA: v_vbeln LIKE vbak-vbeln.
SELECT SINGLE vbeln
                  FROM vbak
                  INTO (v_vbeln)
                  WHERE vbeln IN s_vbeln .
IF sy-subrc <> 0.
    MESSAGE e001(q) WITH 'Invalid Sales document'.
ENDIF.
DATA: v_erdat LIKE vbak-erdat.
SELECT SINGLE erdat
                  FROM vbak
                  INTO (v_erdat)
                  WHERE erdat IN s_erdat.
IF sy-subrc <> 0.
    MESSAGE e001(q) WITH 'No document available with given date'.
ENDIF.
START-OF-SELECTION.
PERFORM get_data_vbak.
PERFORM build_field_catalog.
PERFORM fill_event.
PERFORM print_data_vbak.
END-OF-SELECTION.
*&      Form get_data_vbak
      text
--> p1        text
<-- p2        text
FORM get_data_vbak .
SELECT vbeln ernam erdat auart
                            FROM vbak
                            INTO TABLE it_vbak
                            WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
ENDFORM.                    " get_data_vbak
*&      Form build_field_catalog
      text
--> p1        text
<-- p2        text
FORM build_field_catalog .
w_field-col_pos = 1.
w_field-fieldname = 'VBELN'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Sales Order'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_field-col_pos = 2.
w_field-fieldname = 'ERNAM'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Created by'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_field-col_pos = 3.
w_field-fieldname = 'ERDAT'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Created Date'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_field-col_pos = 4.
w_field-fieldname = 'AUART'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Order type'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_sort-spos = 1.
w_sort-fieldname = 'VBELN'.
w_sort-up = 'X'.
APPEND w_sort TO t_sort.
w_layout-colwidth_optimize = 'X'.
ENDFORM.                    " build_field_catalog
*&      Form user_command
      text
     -->RF_UCOMM     text
     -->RS_SELFIELD text
FORM user_command USING rf_ucomm    TYPE sy-ucomm
                        rs_selfield TYPE slis_selfield.
CASE rf_ucomm.
    WHEN '&IC1'.
      IF rs_selfield-fieldname = 'VBELN'.
        READ TABLE it_vbak INDEX rs_selfield-tabindex.
        IF sy-subrc = 0.
          PERFORM get_data_vbap.
          PERFORM build_field_catalog2.
          PERFORM print_field_data.
        ENDIF.
      ENDIF.
ENDCASE.
ENDFORM.                    "user_command
*&      Form print_data_vbak
      text
--> p1        text
<-- p2        text
FORM print_data_vbak .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
   i_callback_user_command           = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  = I_STRUCTURE_NAME
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      = I_GRID_TITLE
I_GRID_SETTINGS                   = I_GRID_SETTINGS
     is_layout                         = w_layout
   it_fieldcat                       = t_field[]
IT_EXCLUDING                      = IT_EXCLUDING
IT_SPECIAL_GROUPS                 = IT_SPECIAL_GROUPS
   it_sort                           = t_sort
IT_FILTER                         = IT_FILTER
IS_SEL_HIDE                       = IS_SEL_HIDE
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        = IS_VARIANT
it_events                         = it_event[]
IT_EVENT_EXIT                     = IT_EVENT_EXIT
IS_PRINT                          = IS_PRINT
IS_REPREP_ID                      = IS_REPREP_ID
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   = IT_ALV_GRAPHICS
IT_HYPERLINK                      = IT_HYPERLINK
IT_ADD_FIELDCAT                   = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO                   = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER        = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER           = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER            = ES_EXIT_CAUSED_BY_USER
    TABLES
      t_outtab                          = it_vbak
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " print_data_vbak
*&      Form fill_event
      text
FORM fill_event .
DATA : st_event TYPE slis_alv_event.
*- Clear.
CLEAR : st_event, it_event[].
*- Local variable
DATA : l_tabix TYPE sy-tabix.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = it_event
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*- Read event table
READ TABLE it_event WITH KEY name = slis_ev_user_command
                       INTO st_event.
*- Clear
CLEAR l_tabix.
l_tabix = sy-tabix.
*- Check subrc
IF sy-subrc = 0.
    st_event-form = c_usercommand.
*- Modify
    MODIFY it_event FROM st_event INDEX l_tabix.
*- Clear
    CLEAR st_event.
ENDIF.
ENDFORM.                    " fill_event
*&      Form get_data_vbap
      text
FORM get_data_vbap .
IF NOT it_vbak[] IS INITIAL.
    SELECT vbeln
           posnr
           matnr
           zmeng
           netwr
        FROM vbap
        INTO TABLE it_vbap
        WHERE vbeln = it_vbak-vbeln.
    IF sy-subrc = 0.
      SORT it_vbap BY vbeln.
    ENDIF.
ENDIF.
ENDFORM.                    " get_data_vbap
*&      Form build_field_catalog2
      text
FORM build_field_catalog2 .
CLEAR:t_field1,w_field1.
w_field1-col_pos = 1.
w_field1-fieldname = 'VBELN'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Sales Order'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 2.
w_field1-fieldname = 'POSNR'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Sales Doc Item'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 3.
w_field1-fieldname = 'MATNR'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Material No'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 4.
w_field1-fieldname = 'ZMENG'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Target quan units'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 5.
w_field1-fieldname = 'NETWR'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Net value dc cu'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
ENDFORM.                    " build_field_catalog2
*&      Form print_field_data
      text
FORM print_field_data .
SET PF-STATUS 'VBAP'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  = I_STRUCTURE_NAME
I_BACKGROUND_ID                   = ' '
     i_grid_title                      = 'VBAP DETAILS'
I_GRID_SETTINGS                   = I_GRID_SETTINGS
IS_LAYOUT                         = IS_LAYOUT
     it_fieldcat                       = t_field1[]
IT_EXCLUDING                      = IT_EXCLUDING
IT_SPECIAL_GROUPS                 = IT_SPECIAL_GROUPS
IT_SORT                           = IT_SORT
IT_FILTER                         = IT_FILTER
IS_SEL_HIDE                       = IS_SEL_HIDE
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        = IS_VARIANT
IT_EVENTS                         = IT_EVENTS
IT_EVENT_EXIT                     = IT_EVENT_EXIT
IS_PRINT                          = IS_PRINT
IS_REPREP_ID                      = IS_REPREP_ID
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   = IT_ALV_GRAPHICS
IT_HYPERLINK                      = IT_HYPERLINK
IT_ADD_FIELDCAT                   = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO                   = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER        = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER           = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER            = ES_EXIT_CAUSED_BY_USER
    TABLES
      t_outtab                          = it_vbap
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " print_field_data
</code>

Hi Satya..
This is the Sample code...
DATA : V_FORM_GUI TYPE SLIS_FORMNAME VALUE 'F_GUI'. "Form name
**Secondary List
FORM print_field_data .
SET PF-STATUS 'VBAP'. "This statement will not work for ALV
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
<b> I_CALLBACK_PF_STATUS_SET = V_FORM_GUI
                                                  "Subroutine in which GUI status is called</b>
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'   "To handle GUI
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_BACKGROUND_ID = ' '
i_grid_title = 'VBAP DETAILS'
I_GRID_SETTINGS = I_GRID_SETTINGS
IS_LAYOUT = IS_LAYOUT
it_fieldcat = t_field1[]
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
t_outtab = it_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " print_field_data
FORM F_GUI USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'GUI_1'. "Double click and Create this GUI status and add buttons
ENDFORM.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

I just changed my residence to the US and now I cant register my new US credit card on itunes cause the state list doesnt match to the US states, what should I do?

I just changed my residence to the US and now I cant register my new US credit card on itunes cause the state list doesnt match to the US states, what should I do?

Your credit card info, billing address must be the same country as the iTunes store country you registering.
For example, you can’t have a credit card from a U.S. bank with a U.S. billing address registered in the iTunes store for China.
I tried to change my payment information too, but it happened the same, I can change the information but when I get to the state part, it only shows the other country states
Remove all payment info and save it.
Then change the iTunes store country to U.S., add a U.S. credit card with a U.S. billing address.
As previously suggested, if this does not work, contact iTunes store support.
-> http://www.apple.com/support/itunes/contact/

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Opera 12.16 (64)/Win7 Pro (64): I have installed Flash 14x SEVEN TIMES. SETTE. SEPT TIMES. (7 7 7 7 7 7). It is in the Plugins list and ENABLED. Please advise.

Opera 12.16 (build 1860)
Windows 7 Pro (64 bit)
SEVEN times ADOBE has asked me to install the latest version of Flash Player.
SEVEN times I have installed the latest version of Flash Player.
SEVEN times I have checked to see if it in the Plugins list and enabled.
SEVEN times it is in the Plugin list and ENABLED.
ALL SEVEN of them.
Being clever, I disabled all but one of them.
It still doesn't f***** work.
It still f***** asks me to install the f***** program.
Basic question:
Does this lauded, insistent, invasive (and apparently at the moment, USELESS) Adobe product WORK with Opera?
NOTE:
1. All extensions/plugins disabled/turned off: apparently the existence of a YouTube Downloader interferes with Adobe downloads. As does AdBlock, Ghostery, Facebook Redirect, Sociopath, TinEye, TS Video Player, and three of four other things.
PS: Even though I tell it I "DO NOT" want to install Google Chrome, why does it install Google Chrome (first time).
      Even though I told "DO NOT" install Google Chrome, why does it look for it and decide it's already installed (second time).
      But as a time-waster it's nice.
      I got to uninstall Google Chrome twice.

Why are you editing my "question?"
Is it because I said Flash for Opera seemed to patently USELESS (seeing as I've installed it SEVEN times and it still doesn't work)?
Adobe, thank you for the free stuff, but it would be nice if it worked and didn't need updates every thirty minutes.

Hello dps team, A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again la

Hello dps team,
A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again later."
Is there a problem with our dps version or any maintenance work at the servers from Adobe?
Best,
Oliver

Hi Oliver,
Please login to your DPS dashboard and contact support by clicking "Contact support" at the bottom left
Thanks
Lohrii

How can we transport the partner profiles and Port configurations

Hi everybody,
How can we transport the partner profiles and Port configurations. While creating these , system will not ask for Dev class and we cant assign any Transport request number. Then How can we transport these settings?
Your replies are really apreciable.
Thanks and Regards,
Vijay.

Hi,
please have a look of the OSS note: 182172
>>
The partner profiles are stored in the following tables:
Table EDPP1: General partner profile
Table EDP12: Partner profile outbound, additional data NAST
Table EDP13: Partner profile outbound
Table EDP21: Partner profile inbound
Table EDIPHONE: Connection to SAP telephony (optional)
You can use R3TR TABU to manually set the tables into a Customizing request (as of Release 46, into a SYST-type request).
<<
Rgd
Frédéric

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

"issuer is not on the Partner list" and error in the documentation

Similar Messages

Maybe you are looking for