Issues after Windows 10 upgrade

Hi All,  After upgrading to Windows 10,  - The touchpad fails to work.- Unable to connect to Internet (Wireless/LAN).- Microphone/sound not working. Have tried installing the latest win 10 drivers from the Acer support website, still the issue persists. Any idea???

Howdy all, I have an acer w700 now running windows 10 pro, (upgraded from 8.1 pro). The only issue i found was that after upgrading, i would get the following error on booting the system; "Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.
The wait operation timed out. (Exception from HRESULT: 0x80070102)." i found a solution to resolve this; Go into your Task Scheduler (by using Windows search).  The Task Scheduler runs applications according to a schedule.  The MEMS application is crashing Windows 10 (since it is doing Windows 7 related things). In the Task Scheduler Manager, go to the Task Scheduler Library and find MEMS_Schedule.  Right click on that line and left click on Disable.  Now restart your computer. This is an Acer issue, and until Acer issues an update, the MEMS_Schedule needs to be kept disabled. If Acer ever gets around to issuing an update for this, then you can re-enable the MEMS_Sschedule, the same way as diasabling it. Other than this annoying issue, the W700 runs very well under Windows 10...........so far............. 

Similar Messages

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Can't access old ver. 9, 11 & 13 clips after Windows upgrade

    In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips.  In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro).  Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive.  Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13.  Tried everything I can think of....any suggestions PLEASE!

    Very good, I completely understand.  Please understand "I am not a computer geek!"
    With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).  CORRECT!  Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
    When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO!  (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.)  NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them.  As such there is nothing to add to the timeline.  Last night I added to the NEW PE 13 a 22 min program I'm working on.  I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
    Now in response to a previous question you asked:
    1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
    the Presets" field there?  NO.... I can get to /Computer but there is no QuickTime there!  I did download QuickTime yesterday after your suggestion.
    2. You wrote
    Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
    Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
    Or other? What is the specific full name of one of these files that is giving the error message?
    With everything I've been trying, I'll have to recreate this series of events to answer directly.
    When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system?  Help me with a way to determine what the bit was on 9 & 11!
    Were two separate computers involved or did you manage to change the operating all on one computer?  All on one Computer
    The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
    you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace.  Help me understand!!!!  I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace".  But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
    WolcottVideo
        Can't access old ver. 9, 11 & 13 clips after Windows upgrade
        created by A.T. Romano in Premiere Elements - View the full discussion
    WolcottVideo (Mike Bruce)
    Thanks for the replies.
    My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
    Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
    Here is a basic description of where the details between us need to be confirmed...
    With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
    When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
    We will be watching for your reply.
    ATR
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    Start a new discussion in Premiere Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Photoshop CS6 Display issues - After Windows 8 upgrade

    Just upgraded from Windows 7 to Windows 8 Pro (64bit).  Now the background interface in Photoshop CS6 keeps changing when I click the image, the background, the layer and the crop tool.  I get transparent, black and various grey.  I have uninstalled and reinstalled PS CS6 with no change.  I did not have an issue in Windows 7.  The rest of CS6 runs fine. Can anybody help?  Thanks

    What is the make and model of your video card?
    What is the number and date of the installed video driver?
    Is that the latest release from nVidia, or AMD/ATI?
    If it is not the latest, go to the nVidia, or AMD/ATI Web site, plug in your card, and your OS, then download and install the latest driver. Test.
    Do not trust Windows, or any utility to tell you if you have the latest driver. Verify that from the mfgr's. Web site.
    Good luck,
    Hunt

  • Performance issue after PT Upgrade.

    Hakan and Team ,
    We recently moved from PT 8.48 TO PT8.51.18 on CRM 8.8 Application.
    After the upgrade, we tremendously saw big performance issues with PeopleSoft CRM Application. It freezes almost every day and all their work-force (call center representatives) go idle. It significantly impacts their productivity and eventually losing revenue.
    can you please suggest few suggestion or DOC that will help us to improve performance on application and DB side.
    Deatils :-
    SQL SERVER 2005
    Windows 2008 R2

    Hi,
    Performance is always a difficult one to tackle.
    It can be at so many levels, DB, Appserver, Webserver, CPU, RAM, Infra, etc.
    At OOW2012, David Kurtz gave a great highly detailed presentation on this subject: CON9210 - Performance Tuning for PeopleSoft Administrators
    http://www.myexpospace.com/oracle2012/smupload/scloader.cfm?SCID=257daa92-a6e8-411a-9806-2c22e56687d3
    See if you can apply some of the keypoints from his presentation.
    Regards,
    Hakan

  • Permissions issue after Mavericks upgrade

    I have just updated an early 2008 IMac with OSX Mavericks.
    All software running fine, but I noticed occassionally I was getting an authentication prompt on some files, didn't follow, but simply authenticated as and when I need to, I assumed it was when I moved files from my Mac Pro to my Imac.
    Having run the upgrade however, I get an error message to contact the vendor (Battlefront) as my copy of Combat Mission Battle for Normandy has lost its license.
    After the upgrade I had also purchased from the same vendor Combat Mission Fortress Italy. Having downloaded this and gone to run after copying to applications, this software gives me an error message saying unknown developer so I have got no where near installing a license.
    Having contacted the vendor and tried to get a work around, I am now getting the message it is you Mac not our software, despite the fact that all my other software is working fine (and the fact that the Combat Mission Battle for Normandy game worked fine until the upgrade).
    I do feel some sympathy for them, I do think the Mac has some sort of permission issue - I also probably compounded this by deleting a user which I did not recognise called 'wheel' which I suspect now is some form of default permisison.
    Anyone got any ideas, how do I 'reset' the system - I have tried fixing the permissions through disk utility.
    My vendor got me to run a sudo command through Terminal, but I got the message...
    sudo: unable to stat /etc/sudoers: Permission denied
    sudo: no valid sudoers sources found, quitting

    Update Saturday Jan 4, 2014
    Before my Mavericks upgrade on my Mac Pro, no problems ever (use my Mac 4-8 hours a day) using my Bose Companion 5 USB connected speakers. I've tried shutting the Mac down and plugging the Bose USB cable into another open USB port = no joy and other combinations. I tested the same Bose Companion 5 USB speakers on two other laptops with NO issues (ouch...they were running Windows 7) I have deleted the two .plist files, did the CMD+OPT+P+R reset, etc... = no change. Looked into Midi Audio Setup and did not see anything in there to change even though I tried a couple of things and no avail (there was no Garageband setting/entry).
    I still get a solid "BEEEEEEEEP" sound every 20+ seconds, when the sounds tries to toggle, by itself, between the Bose USB Audio device and the Internal Speakers.

  • ITunes Not Working After Windows Upgrade from Vista to 7

    I recently upgraded a laptop from Vista to 7.  iTunes 7.x was installed before the upgrade.  As soon as Windows 7 was insatlled I upgraded to the lates version of iTunes(10.x).  After the upgrade I had some issue where I was getting an error about artwork and iTunes would not open.  I renamed the artwork folder to old and then I was able to get into iTunes.  The next problem that I am running in to is that any time I click on a task such as find music iTunes stops responding and crashes.  I've tried new config files, completely uninstalling and reinstalling, clean booting, etc. with no luck.  Anyone have any suggestions?

    I've been working on this issue for 2 days with no luck.  Still looking for a solution if anyone has one.  Thanks!

  • NSS Issues After Win10 Upgrade

    I have had many of the same issues with the Comcast/Norton Security Suite that have been ID'd in the forum, but have not had a positive resolution. I have tried the downloads numerous times and the installation has failed repeatedly. I have followed the instructions suggested in the threads from "Tazman817" and "USAF", but with no luck. My screen shots are identical to Tazman's, and I have tried both the Norton Power Erase and Norton Removal Tools. I have downloaded the new install from www.norton.com.nss after deleting the Norton folders in Program files. Still no luck. I want to continue to use the Norton product, but after several hours of frustration, I am running out of patience. Are there any other's having these same issues? Are there any other potential solutions? Thank you.

    Thanks for the tip, but my experience with Norton was not as successful as yours. I consulted with two techs over four hours (including phone wait time), and they used remote access to delve into the finer points of my system. They used Norton Power Eraser and Norton uninstaller, deleted Norton Program files, and even went into the Registry to make changes. Other than making registry changes, I had used the other tools prior to calling the support line. Based on the Norton Techs conclusions so far, Norton Security Suite cannot be installed on my system after the upgrade to Win 10. I am waiting a few days to find out if they can develop a fix in the future. Until then, I will be using Windows Defender and Firewall, and exploring other options. Too bad, I have liked using Norton's products.

  • IPhone syncing issues after iTunes upgrade

    Hi
    I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
    I tried authorizing the computer but I just get "This computer is already authorized".
    there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
    I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
    Would re-installing iTunes help?
    Any ideas?
    Thanks
    Chris

    Hi Chris,
    Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
    If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
    If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
    -Jason

  • Issue after solman Upgrade

    Dears,
    We were using solman 7.0, connected to ECC 5.0 server.
    We configured all activities EWA,System Monitoring and all were working fine.
    Now we upgraded solman to 7.01(EHP1) and R/3 to ECC 6.04 .
    1 - My first concern is after upgradation it should automatically pick details but is is still showing ECC5 in product version.
         We performed Read data from remote system also but still same issue.
    2 - When I go to EWA or system Monitoring I only find Prd server there while in solution's logical component all dev,qas and prd servers are available.Earlier before upgrading it was showing all systems in EWA and system Monitoring.
    Please suggest.
    Shivam

    Hello Shivam
    For point #2 please look closely at the solution containing the systsem and make sure that 1) The Dev, QAS systems are included, and are highlighted greeen ( Meaning they are status "Put in Solution"). It sounds a lot like this setting is not done, therefore the systems would not show when you would try and use that solution in functions like EWA, BPMON, etc.
    It sounds very much like when you create a new soltuion with PRD, QAS, DEV systems assigned, but only the PRD system is "Put in Solution" by default, so you explicitly need to right click the system in change/edit mode, and select "Put in Solution", then save.
    Now why this might be the case after the upgrade, I don't have an answer, but it is worth having a check as the symptom fits this issue. I would advise you check the solution itself and ensure the DEV and QAS systems and in status "Put in Solution".
    Hope this information is helpful.
    Regards,,
    Paul

  • VPN Client Issue after Vista Upgrade

    Not sure if this should be posted here, if not please let me know.
    My organization has recently implemented Vista via an Upgrade-in-Place Process that takes an imaged system (Windows XP Pro - 32bit) and upgrades the system with a network image of Windows Vista Enterprise. Applications are left installed and herein lies my problem.
    I'm using Cisco VPN Client 5.0.04, the client worked fine before the upgrade, after the upgrade, not so well.
    While troubleshooting I noted the Cisco Systems VPN Adapter was no longer listed as being installed under Network Adapters in the Windows Device Manager, there was however an adapter, labled 6to4 adapter with an exclamation point. I went through the uninstall process for the Cisco VPN Client, rebooted and reinstalled. When trying to connect, I can use one of two pcf files (both are a back up of one another), the first connection profile goes through the motion of connection, tries to contact the security gateway, and states "Not Connected"
    I enabled logging on the connection and tried again. Here's an excerpt from that log:
    09:37:18.278 04/21/09 Sev=Warning/2 CERT/0xA3600038
    Successfully added Key Usage fields to be matched.
    7 09:37:19.792 04/21/09 Sev=Warning/2 CERT/0xA3600038
    Successfully added Key Usage fields to be matched.
    8 09:37:20.338 04/21/09 Sev=Warning/2 CERT/0xE3600001
    Failed to launch application using cert pipe due to error: 0x800b010a.
    9 09:37:20.338 04/21/09 Sev=Warning/2 IKE/0xE300009B
    Failed to generate signature: Signature generation failed (SigUtil:97)
    10 09:37:20.338 04/21/09 Sev=Warning/2 IKE/0xE300009B
    Failed to build Signature payload (MsgHandlerMM:489)
    11 09:37:20.338 04/21/09 Sev=Warning/2 IKE/0xE300009B
    Failed to build MM msg5 (NavigatorMM:312)
    12 09:37:20.338 04/21/09 Sev=Warning/2 IKE/0xE30000A7
    Unexpected SW error occurred while processing Identity Protection (Main Mode) negotiator:(Navigator:2263)
    Has anyone seen this behavior after an upgrade from XP to Vista? I'm I going to have to start with a fresh install? I appreciate any suggestions or advice.
    Thanks,
    Jimi

    I finally figured out this problem and I feel it should at least be shared for another person who runs into this problem.
    The problem was resolved by loading my personal certificates (the one that is read by the smart card reader and used to authenticate me on VPN) needed to be added to the personal certificates folder in the Local Machine layer.
    I did this by opening up an MMC window --> Adding the certificates snap-in (in windows 7 it distinguishes 3 different layers, so choose the local user and the computer layer) --> and then copying the certificates in the personal folder located under Certificates - Current User into the personal folder located in Local Machine.
    The most likely reason this happened to me is that the image I was working with had security settings blocking the certificates to be read at the current user level and not at the local machine level. Therefore, it's a problem with out image and the security policies put in place at the registry level and/or group policies placed in Active Directory. This is more of a workaround than an actual fix to the problem, but at least it pinpoints where the break is happening.
    Now I can push the image back to the developers to review the security policies placed in the image.

  • SAP Query selection screen issues after ECC upgrade

    Hi all
    We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
    All the fields required are available.
    However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
    Can anyone help identify the issue so that the issue can be resolved?
    Thanks
    Vinodh S

    Hi N_niki
    There is no resolution as such.
    We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
    Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
    Hope this helps.
    Thanks
    Vinodh Sudhakaran

  • IP Phone 7921 / 7925 roaming issues after WLC upgrade from Version 7.2 to 7.3 and / or 7.4

    Hi,
    We have a customer which is using a Cisco WLC 5508 and 3502I APs. As he used the 7.2.103 release, There were no issues with VoWLAN. Now he needed new APs and ordered the 2602I. To use them he needed to upgrade the WLC to a 7.3 or later release. After the upgrade, he now encounters problems while roaming with the phones. The phones were tested with FW 1.4.1, 1.4.2 and 1.4.3.
    Configuration is set according to wireless voice design guides (VoWLAN DG 4.1, 7921 Deployment Guide). A Cisco TAC is also in progress, but they seem to be uncertain whether it is a wireless or CUCM issue, but I don't see a reason why it should be the CUCM when the only thing changed is the WLC Software Version.
    Is there anybody who is aware of such issues and can offer help?
    Thank you in advance.
    Best regards,
    Patrick

    Hi,
    we had a TAC ticket open with this customer and after some time, the TAC gave us the advise to use this release and the problems are now solved.
    So for others having the same issue: If you only need to support the 2600 APs, stay with the latest 7.2 release as there are some issues with the 7.3 and 7.4 release. If the customer requires HA, AVC or any of the new features + wireless voice, be very careful as it seems that the newer releases are having problems with that. I hope that Cisco will fix this very soon.
    regards,
    Patrick

  • Web dynpro ABAP- small issue after EHC1 upgrade

    Hi All,
    We have a Web dynpro ABAP report and it was working fine before the EHC1 upgrade. After the upgrade we noticed that the row count in ALV greed was disappeared.
    The report used to show 25 records per page and we were able to jump to the other pages by clicking on row count that was placed right below the report. Now report shows all the records and we only have scroll down option.
    Any idea where to look/ how to fix this issue?
    Regards,
    Mike

    In addition to applying that note, you also must deactivate Lightspeed rendering.  To me that's too extreme of a thing to do just to get paginators.  You loose the huge rendering performance improvements and it also means you can't use any of the new UI elements from 7.01.

  • Authroization issue after the Upgrade for Multiprovider

    Hello Experts,
    After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the ID.
    The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
    In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
    This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
    Can anyone give me any idea as to how to solve this issue?
    Many thanks in Advance..
    Thanks
    Raman..

    Hi,
    Look at this link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a07122ae-8216-2a10-c9a5-996717a0648b
    Hope it helps

Maybe you are looking for