Issues in Repository Merge

Hi,
If there is a repository A already in Prod environment another Repository B is in Dev.
Is there any common issues will rise when we merge the Repository B with A.
Thanks,
Vino

Hi,
If rpd A totally different from rpd B ?
In this case merge should not have any merge problems. If you see any specific issue please let us know with little more description.
How you are performing merge ? (Manually or MUDE or File - Merge option ? etc)
If rpd A modified in dev so it became B in that case directly replacing PROD rpd with DEV (A with B) should work.
Hope it helped you
--Srinivas Malyala

Similar Messages

Issue with PDF merging

Hi,
I am doing PDF merging using using assembler. But the issue is after merging some of the fields of pdf are non editable. Can some one tell me why this is happening.

Please upload your document and ddx.

Issue with PDF Merge

Hi,
Thanks in advance. I have an issue when I merge pdf files in Acrobat 9. Please see the attached Screenshot below. The issue seems very strange. Few of files in the merge list reads "Can not convert this file ... from the list"
Please help. I need to solve them immediately.
With many thanks,
Saravanan

The two most common reasons why a file would receive such a warning: (1) The file follows a particular standard (e.g., PDF/A or PDF/X) and would no longer comply with the standard if merged. (2) The file has security or a signature applied, and it would lose its integrity of part of a merged PDF
I think more info might be shown if you opened the warning window wider (not sure about whether this is specified in the warning).

Issue with BPM-Merging 2 files.

Hi all,
I am facing one issue with my development object...it is a BPM scenario in which i am merging 2 files using constant correlation id...JDBC to File scenario...i am using 2 JDBC adapters at source side...the scenario is getting executed without any error and i am getting the output...but the output contain only the data in 1 file...merging is not happening and only one file data is displayed in the output...could someone help me with this issue???am i missing something here??any help will be really appreciated...
Thanks,
Lekshmi.

Hi all,
As informed in my earlier post the same scenario was working with File adapters at source side.I figured out why it was working earlier.
Since i have generated the source files for the File adpaters i have added the name space as displayed in the mapping(highlighted in bold letters).
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:Test1_MT xmlns:ns1="http://testing.com/Details">
         <row>
         </row>
      </ns1:Test1_MT>
   </ns0:Message1>
   <ns0:Message2>
      <ns1:Test2_MT xmlns:ns1="http://testing.com/Details">
         <row>
            <VIA_NO/>
            <VSL_NM/>
            <ATA_DTTM/>
            <PATA_DTTM/>
            <ADT_INS_DTTM/>
            <ADT_UPD_DTTM/>
         </row>
      </ns1:Test2_MT>
   </ns0:Message2>
</ns0:Messages>
But in the case of real time scenario data is pulled from database and the input file is created through JDBC adater i am getting the source message for mapping as :
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns:Test1_MT xmlns:ns="http://testing.com/Details">
         <row>
         </row>
     </ns:Test1_MT>
   </ns0:Message1>
   <ns0:Message2>
     <ns:Test2_MT xmlns:ns="http://testing.com/Details">
         <row>
            <VIA_NO/>
            <VSL_NM/>
            <ATA_DTTM/>
            <PATA_DTTM/>
            <ADT_INS_DTTM/>
            <ADT_UPD_DTTM/>
         </row>
     </ns:Test2_MT>
   </ns0:Message2>
</ns0:Messages>
When i tested this message in message mapping it is giving only the first file in the output.
Any idea how to resolve this one?
Rgds,
Lekshmi.

Issue with Duplicate Merge Fields in PDFs

I have been utilizing merge fields from our Salesforce instance into our Forms and Contracts for a couple of years now and have never come across this issue. Since we utilize Salesforce, we will have certain merge fields duplicated on multiple pages. For instance, the Record Owner's Name and Firm from their User records will be on different pages, but will be coming from the same source and need to show the same information. Everything seems to be fine once the documents have been merged, it is printing that is causing the issue.
If I place "Master.Owner_Name" into the PDFs on multiple pages, it will change the name to "Master.Owner_Name#1" and "Master.Owner_Name#0". So now when our users are printing the documentation, the fields are printing out vertically.
Has anyone seen this issue before and how were you able to resolve?
Thank you for any assistance you can provide!

PDF forms are not Salesforce forms and do not work in the same way.
Within a PDF form any field with same type of field and same name will share the same value.
All fields should be uniquely named.
LiveCycle form behave differently and do support same field names with different values unless a field is configured as a global field.
The usual way to have multiple copies of a from within a single PDF is to use a template to make the multiple copies and uniquely name the fields on the copy of the form.

Need details about the BI repository Merging

Hi,
I have a requirement of merging 2 repositories.
some one help me for solving the issue,its urgent requirement for me...
Thanks in Advance for any help
Sree

Hi,
look if this is want you are looking for:
http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/484161.htm
Regards.
Bruno Condemi

Variables not updated after repository merge

Hello,
I am using OBIEE 11.1.1.7 and i am having issue with RPD patch merge.
I have updated the value in the Variable and created a patch out of it.
when i am trying to merge or apply this patch other RPD , it is not updating the value in the variables.
can you please help me with this.
Thanks.

Anybody on this?
Why do the labels of Project Variables not change in Weblogic Enterprise Server 10GR3 although they change in BPM Studio?
I also tried deleting these project variables from the Engine Tables --> PPROCINSTANCE and PPROCINSTEVENT
Restarted Weblogic
Restarted the Engine
Restarted the workspace
Redeployed a fresh BPM project.
But nothing changed?

ACE Issue - while processing merged list

Hi guys,
After aplly the configuration, errors appeared in ACE
“jul 10 2012 19:44:21 : %ace-1-106028: warning: unknown error X while processing merged list. incomplete rule is currently applied on interface vlan120. configuration on this interface needs to be manually reverted”
“config application in progress. this command is queued to the system”
The configuration caused service break of several network components for no apparent reason. During about 10 minutes, which was not possible to perform configuration or rollback.
Can you help me?
Thanks

Hello Luis,
Here you have the explanation of the logging message:
106028
Error Message    %ACE-1-106028: String Incomplete rule is currently applied on
interface interface-name. Manual rollback to a previous access rule configuration
on this interface is needed.
Explanation    Possible String values are:
•WARNING: Access rules memory exhausted while processing component
•WARNING: Unknown error while processing component
Possible values for component are
•Access-list
•Service-policy
•Merged list
For example:
WARNING: Unknown error while processing service-policy. Incomplete rule is currently applied on interface VLAN100. Manual roll back to a previous access rule configuration on this interface is needed.
The access control list (ACL) compilation process has run out of memory, which does not allow new ACL entries to be applied to the specified interface. The ACL configuration downloaded in hardware for that interface may not be in a known state because of this failure.
Recommended Action    The ACL configuration downloaded to the network processors is incomplete. Remove and recreate the affected interface to recover to a known state. If the message is "Access rules memory exhausted," either allocate more memory to that context or remove some of the access group or service policy configuration to reduce the memory usage. If the message is "Unknown error," then there may be an issue with the configuration manager or the ACL merge process.
In order to make sure about what might have happened, then it might be required to replicate the issue and then run some debugs to get more useful data and a #show tech-support
Also, there are some bugs which are also related to the syslog message which you are reporting.
Hope this helps.
Jorge

Issue with Oracle Merge statements (PL/SQL: ORA-00913: too many values)

Hi All,
I am using the below merge statement and I am getting too many rows issues when I am compiling.
BEGIN
FOR te_rec IN ( SELECT /*+ parallel(ts,4) */ te.dtv_acct_num FROM telcos_eligible te, telcos_setup ts, telcos_partners tp
WHERE tp.telcos_name = UPPER((p_telcos_name))
AND ts.partner_id = tp.partner_id
AND te.ts_id = ts.ts_id ) LOOP
MERGE INTO tcs_accounts
USING (
SELECT /*+ DRIVING_SITE(a) */account_id, a.subscriber_id, status, account_type FROM account@tcs_to_paris a WHERE a.subscriber_id = te_rec.dtv_acct_num
) paris_accounts
ON (tcs_accounts.subscriber_id = paris_accounts.subscriber_id)
WHEN MATCHED THEN
UPDATE SET
account_type = paris_accounts.account_type,
subscriber_id = paris_acounts.subscriber_id,
status = paris_accounts.status
WHEN NOT MATCHED THEN
INSERT(account_id, subscriber_id, status_account_type)
VALUES(paris_accounts.account_id, paris_accounts.subscriber_id, paris_accounts.status, paris_accounts.account_type);
END LOOP;
END;
Can you let me know what is the issue here.
Thanks,
MK.

Hi,
Maddy wrote:
... WHEN NOT MATCHED THEN
INSERT(account_id, subscriber_id, status_account_type)
VALUES(paris_accounts.account_id, paris_accounts.subscriber_id, paris_accounts.status, paris_accounts.account_type);This is one of the many times when a little formatting can really help you. Anybody can forget a column (or have an extra one, or type a _ when they mean ,) but if you write code like this
INSERT ( account_id, subscriber_id, status_account_type)
VALUES (paris_accounts.account_id, paris_accounts.subscriber_id, paris_accounts.status, paris_accounts.account_type);you might spot the error yourself.
Always format your code. When you post any formatted text on thsi site, type these 6 characters:
\(small letters only, inside curly brackets) before and after formatted text, to preserve spacing.

SSRS 2008 Header height issues due to merged columns

When working on a report today we ran into an issue which took us quite some testing to figure out. At some point we decided to switch some of the headers of columns around and when rendering the report again it for some reason created a header which was
way heigher then the biggest text there, showing a huge empty space in the header underneath the text.
My first guess was that there had to be some extra spaces in some column or something alike, which made the cells grow so much. This however was not the case. As a next step I cleared the cells in the headerrow one by one to figure out which field was making
the header grow this much. It turned out to be the header in the 10th column. When I replaced the text in this cell, it did not make the header grow anymore. When I put the original text back, it started growing again. As a next step I removed the text in
this cell, pasted it in another cell (column 11) and rendered the report, with the same huge header again. Out of frustration I tried a desperate last move, copied it to column 1 and rendered the report, the effect was a small header without some weird height.
So the conclusion was that this text was making the header grow hugely in the columns 10 and 11, but not in column 1? What is the difference between column 10/11 and column 1?
Then I noticed that column 7, 8 and 9 were pretty small columns, only holding integer values. The header above this, however, was one word, so the 3 cells in the header for these columns were MERGED. So basicly, only looking at the cells in the header, my
huge text was in the 8th cell from the left, not the 10th (10th column, but due to merging the 8th cell). As a test I editted the width of the 8th column (the middle one of the merged cells) to be as wide as all the other columns holding text. The rendering
of the report, with the huge text in the original headercolumn, now did not grow my header to be extremely big. This combined with the way "hiding" works in SSRS 2008 oppose to SSRS 2005 (ie, in 2008 a hidden cell disappears completly, moving all next cells
up to the left, where as in 2005 a hidden cell just shows as empty in the report), leads me to believe that there is a bug in SSRS 2008 considering cell widths and merged cells? It is like the 10th column header now thinks it is part of the 8th column (being
the 8th cell in its row due to merging) and therefor works with the width of this 8th column to judge how much increased height it needs. In fact it is the width of the 10th column and therefor doesnt need the height it creates, resulting in a huge empty space
underneath the text.
Is this a known issue by Microsoft? Any ETA on this for a fix?

This combined with the way "hiding" works in SSRS 2008 oppose to SSRS 2005 (ie, in 2008 a hidden cell disappears completly, moving all next cells up to the left, where as in 2005 a hidden cell just shows as empty in the report), leads me to believe that
there is a bug in SSRS 2008 considering cell widths and merged cells?
Hi Joel_i,
I was a little confused with the paragraph above. Could you please elaborate it?
Based on the information posted, I tried to reproduce the scenario, but it works fine. During my test, the header cells grow
only when the text in the head column is too long which will caused newline, or there is some extra space in some columns. So, you might need to check the properties of the 8<sup>th</sup> column cell, such asSpaceAfer,
SpaceBefore, to make sure all properties are set rightly.
To provide you further assistance, could you please post the report and dataset with sample data to our data collection E-mail
address?
E-mail: sqltnsp AT microsoft.com (Please replace the AT with @, and remove additional spaces).
Thanks,
Lola Wang
Please remember to mark the replies as answers if they help.

Issues when we merge The RPD

HI Guys
I wanted to know about the issues that originate when we merge the RPDs, over the internet we can find a lot of blogs regarding how to merge 2 RPDs but no one has blogged or provided information about the RPDs Issues that we face when we perform the Merge. So please list issues faced by you guys in this link. We can discuss about the these issues.
regards

We are trying to connect to service and EJB from our local weblogic portal
Client Server Info
Weblogic version 9.2
jdk1.5
Server Info
Weblogic version 9.2
jdk1.5
In properties file we have delcared the EJB client URL : t3://IP:7685
code
private static final String CLIENT_EJB_KEY_PREFIX = "ejbclient.";
private static final String CLIENT_EJB_JNDI_NAME_SUFFIX = ".remoteJndiName";
try {
String className = cls.getName();
String key = CLIENT_EJB_KEY_PREFIX + className + CLIENT_EJB_JNDI_NAME_SUFFIX;
LOG.debug("Looked up key of {} for className: {}", key, className);
String jndiName = cfg.getString(key);
System.out.println("Inside getHome Method : Jndi Name"+jndiName);
if (StringUtils.isEmpty(jndiName)) {
System.out.println("Inside if");
throw new ServiceNotAvailableException("Unable to locate JNDI key of %s for class %s", key, className);
Hashtable<String, String> env = new Hashtable<String, String>();
env.putAll(context.connectionEnv());
Context ctx = new InitialContext(env);
EJBHome home = (EJBHome) ctx.lookup(jndiName);
return home;
} catch (NamingException cause) {
throw new ServiceNotAvailableException(cause);
The call to EJB is failing because it is not able to communicate using T3 protocol.

Language Issue in Repository Manager and T-REX

Hi Everybody,
we are trying to implement a repository manager for SAP KM. Our systems stores documents language specific in a database. Now we are wondering how we should create a view to the documents, so that every document in each language is indexed by T-REX correctly. Lets say the internal view is something like this:
   /Documents
      ->File.pdf
/Images
      ->Image.jpg
In this case File.pdf and Image.jpg can exist in different languages. So our question is, does T-REX create an index for each language available in the portal? If so, which would be very nice, how can we get the current language T-REX is using for indexing within our RM implementation?
Otherwise we have to create virtual TOP-Level laguage folders for each language in our database that would look like this
/de
   /Documents
      ->File.pdf
/Images
      ->Image.jpg
/en
   /Documents
      ->File.pdf
/Images
      ->Image.jpg
We try to avoid this, since File.pdf ist a single item with different language versions.
Does anybody know the best way to solve this?
Kind Regards,
Ali

Hi Matthias,
I think the language handling and the mapping of default languages is application specific and should be done within the RM. In our case this available allready, since our WCMS system allready take care about that... So for a logged in user, we are able to create a language specific folder structure very nicely.
Our problem is the indexing by TREX. We wan't to make sure that every language version of the docment can be found when people searching. So in our case the perfect solution would be that TREX asks the RM for available languages in the repository and starts a crawler for each language available in the repository.
Something that I am not sure about is the presentation of the search results. Since the URL of the search result might point to a different language version than the logged in user has. So if the URL is
http://server/irj/go/km/repsotory/Documents/File.pdf
this might result to a german document, even if the searched term is in the english document. So the language must be set in the search result. For example like this
http://server/irj/go/km/repsotory/Documents/File.pdf?locale=en
This would be our preferred way to handle this issue. I think we will keep the virtual language folders until the new feature is available.
Thank you guys for this very high quality answers )
Kind Regards,
Ali

Issue with repository variable in OBIEE 11g

Hi
While i am using repository variable directly in filter it is working fine, but when i am using 'repository variable -1' in filter then it is throughing error as 'repository variable -1' is not present.
Can't we use - , + on repository varaibles in filters.Can anyone help me.
Thanks
Edited by: Manu on Apr 2, 2013 4:28 AM

I want to know how answers is treating it char type or number type?
just cast it to number and try.
Edited by: Srini VEERAVALLI on Apr 2, 2013 7:00 AM
BTW: how you are calling variable
lik this
repository variable - 1
or like this
VALUEOF(repository variable) - 1
Edited by: Srini VEERAVALLI on Apr 2, 2013 7:11 AM

Issues Playing a Merged DataSource

Hi, I'm trying to merge 2 audio DataSources, but when I create a Player for the MergedDataSource, I get the following error:
javax.media.NoPlayerException: Cannot find a Player for: com.ibm.media.protocol.MergingPullDataSource@4c624c62
     at javax.media.Manager.createPlayerForSource(Manager.java:1512)
     at javax.media.Manager.createPlayer(Manager.java:500)
     at Sample1.<init>(Sample1.java:25)
     at Sample1.main(Sample1.java:39)
This is my code:
public Sample1() {
          MediaLocator ml1 = new MediaLocator("file:/c:/dev/samples/sample1.wav");
          MediaLocator ml2 = new MediaLocator("file:/c:/dev/samples/sample2.wav");
          try {
               DataSource ds[] = new DataSource[2];
               ds[0] = Manager.createDataSource(ml1);
               ds[1] = Manager.createDataSource(ml2);
               DataSource ds3 = Manager.createMergingDataSource(ds);
               Player player = Manager.createPlayer(ds3);
               player.start();
          } catch (NoPlayerException e) {
               e.printStackTrace();
          } catch (IOException e) {
               e.printStackTrace();
          } catch (NoDataSourceException e) {
               e.printStackTrace();
          } catch (IncompatibleSourceException e) {
               e.printStackTrace();
Any help would be great, thanks.

Someone on the forum recently posted sucess doing that using the merge example, and claimed the Merge example produced a single output track under the condition that the input tracks were of identical formats.
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/Merge.html]
It's my understanding of the code that given 2 audio inputs you'll get an output with 2 audio tracks combined into a single file, but, the user (don't recall who) said they got a single track output... so the moral of the story is, I'm probably wrong and your milage may vary.
But I'd give the example code a few tinkering hours and see what it'll give ya.

XI transport issue in repository.

XI 7.0 SP10
Hi,
I imported a repository object.
First time,i imported this object to target system successfully.
Second time,i deleted a data type in source system,then import the new version to update target system.It seems no error occured according to the system message.but new version has not been changed in target system.Could you help me?
Regards,
Brand

Hi Manju
I had resolved this problem after
importing again.I don't konw why..Maybe just like you said it is a cache refresh problem.
Thank you for helping.
brand

Issues in Repository Merge

Similar Messages

Maybe you are looking for