Issues loading data in table component after dploying to tomcat5.5.28

Hi
I export a war file from sjsc2 u 1 into tomcat5.5.28 and also set up jndi to point to the datasource properly but displaying table component with the data loaded from creator.i'm getting the following error
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
     com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
root cause
java.lang.AbstractMethodError: oracle.jdbc.driver.OracleDatabaseMetaData.locatorsUpdateCopy()Z
     com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:972)
     com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1410)
     com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1219)
     com.sun.data.provider.impl.CachedRowSetDataProvider.absolute(CachedRowSetDataProvider.java:283)
     com.sun.data.provider.impl.CachedRowSetDataProvider.getRowKeys(CachedRowSetDataProvider.java:232)
     com.sun.data.provider.impl.CachedRowSetDataProvider.cursorFirst(CachedRowSetDataProvider.java:351)
     com.sun.data.provider.impl.CachedRowSetDataProvider.setCachedRowSet(CachedRowSetDataProvider.java:182)
     com.sun.data.provider.impl.CachedRowSetDataProvider.close(CachedRowSetDataProvider.java:209)
     epnl_idbadge.managers_browse_screen.destroy(managers_browse_screen.java:380)
     com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.destroy(ViewHandlerImpl.java:580)
     com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:316)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.
Pls can anyone show me the way out.
Thanks in advance

Thanks for your response ,I have the following drivers in my Tomcat\common\ lib
ojbc14.jar
ojbc14_g.jar
ojbc14dms.jar
ojbc14dms_g.jar
orai18n.jar
Pls check if there is any thing i need to do to make it work right.
Thanks

Similar Messages

FDMEE Import error "No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'

Hi,
We are having trouble while importing one ledger 'GERMANY EUR GGAAP'. It works for Dec 2014 but while trying to import data for 2015 it gives an error.
Import error shows " RuntimeError: No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'."
I tried all Knowledge docs from Oracle support but no luck. Please help us resolving this issue as its occurring in our Production system.
I also checked all period settings under Data Management> Setup> Integration Setup > Global Mapping and Source Mapping and they all look correct.
Also its only happening to one ledger rest all ledgers are working fine without any issues.
Thanks

Hi,
there are some Support documents related to this issue.
I would suggest you have a look to them.
Regards

How can I load data into table with SQL*LOADER

how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)

Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961

Issue with data dictionary -Table maintanance generator

Hi all,
I have an issue with Data dictionary, table maintenance generator. I have entered some records in a custom table (ZBCSECROLETOGRP) and changed the delivery class from C to A. When I create the table maintainance generator, I am encountered with the following errors:
1)Field ZBCSECROLETOGRP-PORTALGROUP shortened (new visible length: 000032)
2)0012 could not be generated
3)In TCTRL_ZBCSECROLETOGRP field LENGTH has the invalid value 01
My main motto is to create the table maintainace generator and transport to the furthur systems .
Please help.
ThnX in advance,
Vishal..

HI,
Regenerate the table maintenance by selecting the checkbox of "Modified field structure" => new entry & then save.
Also ensure that the new changes are not affecting old data bcz of data type changes. If that is the case, then delete the old records, regenerate table maint. & re-enter those records which you had deleted.
Thanks,
Best regards,
Prashant

CIF issue u201CNo data in table TRFCQDATA selected (internal )u201D

Hi SAP Gurus,
I am facing CIF issue in R/3 quality system after this system has been refreshed with production. When i try to activate the integration model for any data, the inbound queues are failing with status "u201CNo data in table TRFCQDATA selected (internal )u201D. When i try to delete this queue and activate the integration model the same is getting activated. But seems like activation is not happening as expected. Please advise on how do resolve this issue of u201CNo data in table TRFCQDATA selected (internal )u201D.
I have been looking into the SAP note 961154 for the resolution. But when we tried the same implementing and it thrown up an error message saying that its applicable to DB2 database .We are having IBM hardware with Linux and oracle database. Please any one of you know what SAP note is applicable in that case. I am not sure of what needs to be maintained in that tabe TRFCQDATA and the significance of the same.
Based on your replies, i am thinking of reaching out the SAP by raising an OSS note.
Thanks in Advance.
Jagadeesh

Hi,
The destination in SMQR should either be empty or pointing to a destination on the local system. If you configure it with a destination pointing to other system, then you will get this problem, because the data is only available on the local system and the inbound luws should only be processed on this local system.
Please check the note no 369007, specifically question 11 to ensure you have the correct settings.Also go through the note description and answers to other questions and see if it helps.
Also check the following notes:
697884 - Queues in SMQ2 are not processed.
524419 - Procedure for large-scale queue jams.
523974 - Inbound/outbound queues are not processed.
527481 - tRFC or qRFC calls are not processed.
564612 - FAQ, Q+A, SM59, RFC destination, RFC error
I hope I could help.
Regards,
Tibor

Not able to load data in tables with correct way

Hi
i made one trigger to load data in view and tables.
CODE FOR TRIGGER>>>>
Object Details Code Errors SQL
CREATE OR REPLACE TRIGGER "WELL_GENERATOR_TRIGGER_1"
INSTEAD OF INSERT ON VIEW_WELL_GENERATOR_FORM
FOR EACH ROW
DECLARE
rowcnt number;
BEGIN
INSERT INTO facility (FAC_PK) VALUES (:NEW.FAC_PK);
SELECT COUNT(*) INTO rowcnt FROM WELL WHERE WEL_PK = :NEW.WEL_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL (WEL_PK,SITE,FAC_FK) VALUES(:NEW.WEL_PK,:NEW.SITE,:NEW.FAC_PK);
ELSE
UPDATE WELL SET WELL.SITE = :NEW.SITE,
WELL.FAC_FK = :NEW.FAC_PK
WHERE WELL.WEL_PK = :NEW.WEL_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM WELL_STATUS WHERE WELL_STATUS.STA_PK = :NEW.STA_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL_STATUS (WELL_TYPE, WELL_TYPE_DATE, OPER_STATUS, CLASS,WEL_FK)
VALUES(:NEW.WELL_TYPE, :NEW.WELL_TYPE_DATE, :NEW.OPER_STATUS, :NEW.CLASS,:NEW.WEL_PK);
ELSE
UPDATE WELL_STATUS SET WELL_STATUS.WELL_TYPE = :NEW.WELL_TYPE,
WELL_STATUS.WELL_TYPE_DATE = :NEW.WELL_TYPE_DATE,
WELL_STATUS.OPER_STATUS = :NEW.OPER_STATUS,
WELL_STATUS.CLASS = :NEW.CLASS,
WELL_STATUS.WEL_FK = :NEW.WEL_PK
WHERE STA_PK = :NEW.STA_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM PERMIT WHERE PERMIT.PER_PK = :NEW.PER_PK;
IF rowcnt = 0 THEN
INSERT INTO PERMIT (AUT_STATUS,WEL_FK) VALUES (:NEW.AUT_STATUS,:NEW.WEL_PK);
ELSE
UPDATE PERMIT SET PERMIT.AUT_STATUS = :NEW.AUT_STATUS,
PERMIT.WEL_FK = :NEW.WEL_PK
WHERE PERMIT.PER_PK = :NEW.PER_PK;
END IF;Now But still i am not getting result which i want.Like in WELL_STATUS table i could nt able to insert the value (WEL_FK) from (WEL_PK).And In PERMIT table column (WEL_FK) still i could nt able to insert the value (WEL_PK).
Now WEL_PK value autogenerate from the SEQ same with STA_PK and PER_PK.But instead of taking value from seq STA_PK take the value from WEL_PK (dnt know why ? But in data its shows me Same value WEL_PK and STA_PK).Same thing With PER_PK.
so where i am wrong ? i really need your help.
workspace:PRACTISE
UN:[email protected]
PW:testing
Application: 39289 - TESTTING
Thanks
Edited by: vijaya45 on Jul 13, 2009 9:44 PM
Edited by: vijaya45 on Jul 14, 2009 12:48 AM

Hello vijaya45,
Not sure if this will help, but I noticed you currently have a WELL_GENERATOR_TRIGGER_1 and a WELL_GENERATOR_TRIGGER_2, and "1" is disabled but "2" is enabled. Which one is supposed to be running at this point?
John

Error while loading data to table

I was trying to load data into 2 tables using a single control file. When I run the program, it ends up in error.
The error shown is
The executable file /appl/apps/apps_st/appl/ap/12.0.0/bin/TEST_SHELL for this concurrent program cannot be executed.
Contact your system administrator or support representative.
Verify that the execution path to the executable file is c
The error is incomplete.
Please help me with this.
Thanks,
Anand

Pl post details of OS, database and EBS versions.
Pl confirm you followed all of the steps in these docs
How to Use 9i or 10g Features in SQL*Loader for Apps? [ID 423035.1]
How To Create A Custom Concurrent Program With Host Method and Pass Parameters To The Shell Script [ID 266268.1]
HTH
Srini

Sql*loader - load data in table with multiple condition

Hi,
I have oracle 9i on Sun sloaris and i need to load data in one of oracle table using sql*loader with conditional column data.
My table is like:
Load_table
col1 varchar2(10),
col2 varchar2(10),
col3 varchar2(10),
Now i have to load data like:
If col2 = US1 then col3 = 'AA'
If col2 = US2 then col3 = 'BB'
If col2 = US3 then col3 = 'CC'
How can i load this data in table using sql*loader?
Thanks,
Pora

Hi
it is a half-solution.
You have to:
1. open file
2. take a line
3. split the line into values (using substring to)
4. check condition (01 or 02)
5. do a proper insertion
Good Luck,
Przemek
DECLARE
v_dir VARCHAR2(50) := 'd:/tmp/'; --directory where file is placed
v_file VARCHAR2(50) := 'test.txt'; -- file name
v_fhandle UTL_FILE.FILE_TYPE; ---file handler
v_fline VARCHAR2(906); --file line
v_check VARCHAR2(50);
BEGIN
v_fhandle := UTL_FILE.FOPEN(v_dir, v_file, 'R'); --open file for read only
LOOP -- in the loop
UTL_FILE.GET_LINE( v_fhandle , v_fline); -- get line by line from file
if (substr(v_fline,17,2) = '01') then --check the value
INSERT INTO ... -- Time_in
else
INSERT INTO ... -- Time_out
end if;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND
THEN UTL_FILE.FCLOSE( v_fhandle );
END;

Performance issue loading data out of AS400

Hi,
For loading data out of AS400, I have created a view containing a join between three AS400 tables connected with a database link (And some more changes in the file tnsnames.ora and the listener. Hell of a job with Oracle, but it works finally)
When I use the tool Toad, the results of this query will be shown in about 20 seconds.
When I use this view in OWB to load this data into a target table, then the load takes about 15 MINUTES!
Why is this so slow?
Do I have to configure something in OWB to make this load faster?
Other loads when I'm using views (to Oracle tables) to load data are running fast.
It seems that Oracle does internally more dan just running the view.
Who knows?
Regards,
Maurice

Maurice,
OWB generates optimized code based on whether sources are local or remote. With remote sources, Warehouse Builder will generate code that uses inline views in order to minimize network traffic.
In your case, you confuse the generation by creating a view that does some remote/local joins telling OWB that the object is local (which is only partly true).
Perhaps what you could do is create one-to-one views and leave it up to OWB to join the objects. One additional advantage you gain with this approach is that you can keep track of the impact analysis based on your source tables rather than views that are based on the tables with flat text queries.
Mark.

Best way to load data in table from combination of Table and flat file?

Hi All,
Could you please share your thoughts on best way of achieving this objective -
Flat File - 15 Million records (Field A,B,C)
Table A - 15 Million records ( Field A,D)
Objective -
Load Field A,B,C,D in Table B from Flat file and Table A.
Data can be loaded from flat file in Table B then updated from Table A but this update operation is taking lot of time. (Intermediate Commit, Bulk operations already tried)
Regards,
Dark Knight

Environment -
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Tables are analyzed.
Indexes are their.
Update statement using the index.
Data is close to 200 MB.
I am interested in knowing if there are alternate ways of doing this, other than conventional way of loading data then updating it.

Shell Script Programming -- Loading data into table

Hello Gurus
I am using Oracle's sql*loader utility to load data into a table. Lately, I got an unlikely scenario where in I need to process the data file first before loading it into the table and where I need help from you guys.
Consider the following data line
"Emp", DOB, Gender, Subject
"1",01/01/1980,"M","Physics:01/05/2010"
"2",01/01/1981,"M","Chemistry:02/05/2010|Maths:02/06/2011"
"3",01/01/1982,"M","Maths:03/05/2010|Physics:06/07/2010|Chemistry:08/09/2011"
"4",01/01/1983,"M","Biology:09/09/2010|English:10/10/2010"Employee - 1 will get loaded as a single record in the table. But I need to put Subject value into two separate fields into table. i.e. Physics into one column and date - 01/05/2010 into separate column.
Here big problem starts
Employee - 2 Should get loaded as 2 records into the table. The first record should have Chemistry as subject and date as 02/05/2010 and the next record should have all other fields same except the subject should be Maths and date as 02/06/2011. The subjects are separated by a pipe "|" in the data file.
Similarly, Employee 3 should get loaded as 3 records. One as Maths, second as Physics and third as Chemistry along with their respective dates.
I hope I have made my problem clear to everyone.
I am looking to do something in shell scripting such that before finally running the sql*loader script, the above 4 employees have their records repeated as many times as their subject changes.
In summary 2 problems are described above.
1. To load subject and date into 2 separate fields in Oracle table at the time of load.
2. If their exists multiple subjects then a record is to be loaded that many times as there exists any changes in employee's subject.
Any help would be much appreciated.
Thanks.

Here are some comments. Perl can be a little cryptic but once you get used to it, it can be pretty powerful.
#!/usr/bin/perl -w
my $line_count = 0;
open FILE, "test_file" or die $!;
# Read each line from the file.
while (my $line = <FILE>) {
    # Print the header if it is the first line.
    if ($line_count == 0) {
        chomp($line);
        print $line . ", Date\n";
        ++$line_count;
        next;
    # Get all the columns (as separated by ',' into an array)
    my @columns = split(',', $line);
    # Remove the newline from the fourth column.
    chomp($columns[3]);
    # Read the fields (separated by pipe) from the fourth column into an array.
    my @subject_and_date = split('\|', $columns[3]);
    # Loop for each subject and date.
    foreach my $sub_and_date (@subject_and_date) {
        # Print value of Emp, DOB, and Gender first.
        print $columns[0] . "," . $columns[1] . "," . $columns[2] . ",";
        # Remove all double quotes from the subject and date string.
        $sub_and_date =~ s/"//g;
        # Replace ':' with '","'
        $sub_and_date =~ s/:/","/;
        print '"' . $sub_and_date . '"' . "\n";
    ++$line_count;
close FILE;

Loading Data into Table with Complex Transformations

Hello Guys
I am trying to load data into one of the Dimension table and it has quite a few Transformations and i created 6 temp tables
1. It has 7 Columns , Gets 935 rows based on where condition
2. It has 10 Columns , Gets 935 rows with but it has nulls in it i.e for column 1 there are 500 fields and columns 2 there are 300 etc ...
3 , 4 , 5 , 6 all the same as the 2 table
and at the end when i am trying to join all the temp tables with the Product_id into the target , which is in each temp table ...
I am Getting Error Saying Not Obeying Primary key Constraints i.e unique values are not been inserting into the Product_id Column of Target Table and the Job is running for Hours
and the main Problem comes at , some of the Columns have the same Product_id
Please help me
I have been Trying for 1 week and i am in Full pressure
Thanks
Sriks
Edited by: Sriks on Oct 16, 2008 6:43 PM

Hi,
If you are creating a warehouse and product_key is ur PK then it should come only once and so u might have to think ur logic in getting the data. To get over the isue u can disable the constraint and load with out the cosntraint, but i would have u look at the logic and make sure u have only 1 product_key in the table.
Regards
Bharath

How to load data into table Using Script Task

We have a directory/folder where we have a file. We need to insert the File Created Date , File Name , Extension into the database table of Sql server by using Script Task.
So could you please suggest , how to frame the connection string , fetch the file details and insert the data into the database table using Script Task of SSIS 2008

You can achieve it as follows using standard script task
1. Add a ForEachLoop container to point to your directory to iterate though the files. Add a variable of type string inside loop to get file name of each file it iterates. Choose option Filename and extension. Add a variable to just store extension part
(FileExtension), set EValuateAsExpression true for it and give expression as below
SUBSTRING(@[User::FileName],FINDSTRING(@[User::FileName],".",1)+1,LEN(@[User::FileName]))
2. Add a script task inside loop and pass filename variable as a read only variable to it. Crete a new variable to get creationdate and pass it as ReadWrite. Inside write code as below
Public Sub Main()
' Add your code here
Dim f As New System.IO.FileInfo(Dts.Variables("FileName").Value.ToString())
Dts.Variables("FileCreatedDate").Value = f.CreationTime
Dts.TaskResult = ScriptResults.Success
End Sub
3. Add a Exec SQL Task after Script task inside loop and give a query like below
INSERT INTO TableName (FileName,CreatedDate,Extension)
VALUES(?,?,?)
and in parameter tab map the parameter placeholders 0,1 and 2 to @[User::FileName],@[User::FileCreatedDate] & @[User::FileExtension] variables
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Issue loading data from PSA to Cube

Hi Gurus:
I have a strange issue. My DELTA load to ODS from R/3 come thru fine. However, the load fails while moving
from ODS to the cube. The error is in 'Fiscal Year/Period'. It is a straight 1:1 map in update rules. If I bring the
data just to PSA there is no error. But when the data moves from PSA to cube, one record in each of the 2
packages the valiue of Fiscal Year/Period changes from "012/2009" to "015/2009".
Any idea why this might be happeing and suggestions on How can I move this data to cube?
Thanks in advance and a very happy New Year!
Best.....PBSW

Are you using or copying Busines Content in your start routines?
In the SD data extractors, the Fiscal Year/Period was provided WITHOUT a Fiscal Variant.
In the Start Routine, the Fiscal Variant was hard coded to "K4" (I think).
If you are using the code and a Fiscal Calendar other than the Hard coded one, you might get this type of error.
If so, consider setting the Fiscal Variant as a constant in the update rules.
Good Luck,
John Hawk

Error while loading data for table. (ADM0161)

I've this messages when I perform a Scan
and Repair operation in version 5.1
The table is obj_X_DOCUMENTS
Can you help me?
Thanks

Check following KB (SAP Note) - 1181953 - Errors: "ADM0161," "DA0005," "ORA-12535," "ORA-00911,"ORA-01001" and "ORA-12560" after moving repository and data source databases between database servers.
Either connection to your Document domain is not working or you have corrupted DB and need to restore from backup.
Please note, 5.1 is no longer supported. Only online content is still available.

Issues loading data in table component after dploying to tomcat5.5.28

Similar Messages

Maybe you are looking for