Issues Updating Articles - The upload has failed. Network failure.

Not sure if the server is being unresponsive or if it is something my end but for the last couple of hours I've had problems updating my articles - it's very intermittent, sometimes working but more often than not I'm getting the error -
The upload has failed.
Network failure.
Very frustrating...

Was successfully re-linking indesign files to my dps producer dashboard.  Files had been converted to CC (from CS6)-- and was switching from v26 to v 28.    Everything was working just FINE, until about 6pm yesterday-- I had re-linked almost 3/4ths of my files, then  I began getting the NETWORK FAILURE notice. 
This morning, I tried creating a new folio-- managed to upload ONE new file into the new folio, then got the same 'network failure' message on the next one I tried to upload.
These files are from a successful app-- already in the app store, but it sure doesn't work right now!  IOS 7 ... #!#*?
It is not about where your files are-- or how much memory -- Something else is going on. 
I know you guys will figure it out...and will be standing by, anxious to fix my app!
THANKS.
nancy p

Similar Messages

  • "The upload has failed. There was a problem running a virus scan for the file."  any ideas???

    "The upload has failed.
    There was a problem running a virus scan for the file. "
    This is the message i get when tryng to update
    any ideas?

    Error: "svr.VirusScanExecutionError"
    An intermittent problem with acrobat.com's underlying virus scan component causes this issue. This issue happens occasionally on a small number of server instances.
    The solution is to update the article again. Trying again typically routes you to a different host in the server array.

  • The upload has failed. An unknown server error occurred during processing. Please try again

    I keep getting this message when I try to upload a folio "The upload has failed. An unknown server error occurred during processing. Please try again". It happens every time, some articles do upload but some not.

    Thanks Automator21 I manage to upload most of my articles successfully by starting again the whole process. But I have 4 articles that I can't upload, all of this articles have big size videos (one 50mb, other one with 70mb, other with 4 small 30mb videos). I could upload those articles by taking the videos out, but I want those videos on my articles.
    I use Adobe Media Encoder to compress the videos and they are not in high quality, for example the 70mb file is an 640x480 8 min. long video. And they are all with H.264 encoding and .mp4.
    Do you know how can I fix this problem.
    Thanks!

  • The upload has failed. [svr.VirusDetected]

    Hi, when i upload an article i get this message
    "The upload has failed.
    [svr.VirusDetected]"
    What does it mean? Can anyone help me?
    Thanks

    We are tracking this problem on another thread...
    http://forums.adobe.com/thread/1048826?tstart=0
    Thanks.

  • The upload has failed. [Content.Error.ContentRead]

    I receive this error:
    "The upload has failed.[Content.Error.ContentRead]"
    Any idea?
    Thanks

    Check the overlays in your source document. When you select the overlay frame, check for a yellow triangle in the Folio Overlays panel. For example, an image sequence overlay might be pointing to a folder that cannot be found. Let us know if you still keep getting this error.

  • The upload has failed.[svr.VirusScan Execution Error]

    Hi there
    I got this error after uploading an Article (some MSO with movies and link to other MSO), any idea where it from?
    Thank you
    A

    We are having a lot of problems with the virus scan on large files. Rest assured, this is a very high priority for our next release, since it's impacting users across all Acrobat.com<http://Acrobat.com> products. We are currently testing the solution, and I'll report on our rollout when we release our R23 version.
    I realize this is no consolation to those who are presently seeing this problem repeating itself. The best encouragement I can give is to pare down file sizes, sine the overall size of the file is the sole trigger of this failure.
    Thanks for you patience, and look to Bob's release notes for news on the fix.
    // James Roche
    // I was born lucky

  • The upload has failed. [Content.Error.ContentWrite]

    Any ideas why I am getting this error. I have uploaded 9 files fine, for some reason the last one won't go.

    Hey, same here… since last night. Did you find a solution?
    Thx a lot,
    Robert

  • The upload has failed. [svr.Unknown].

    What can I do to solve this?

    If you get an "svr.unknown" error, see this tech note: http://kb2.adobe.com/cps/924/cpsid_92407.html

  • Upload has failed. Network failure

    Hello.
    Since i work with indesign cc, i have a trouble wit folio builder panel: Everytime the upload fails at first attempt, it appears this message:"Upload has failed. Network failure." Ever works when i retried, but not at first attempts. This is unworkable with large publications, with a lot of articles. I´ve wrote that this is a trouble with the acrobat.com service outage, i need a solution.
    Thanks. Best regards. 

    Was successfully re-linking indesign files to my dps producer dashboard.  Files had been converted to CC (from CS6)-- and was switching from v26 to v 28.    Everything was working just FINE, until about 6pm yesterday-- I had re-linked almost 3/4ths of my files, then  I began getting the NETWORK FAILURE notice. 
    This morning, I tried creating a new folio-- managed to upload ONE new file into the new folio, then got the same 'network failure' message on the next one I tried to upload.
    These files are from a successful app-- already in the app store, but it sure doesn't work right now!  IOS 7 ... #!#*?
    It is not about where your files are-- or how much memory -- Something else is going on. 
    I know you guys will figure it out...and will be standing by, anxious to fix my app!
    THANKS.
    nancy p

  • I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

    i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

    I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed.  It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4).  Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html   The previous version works beautifully.

  • HT201210 I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found.  What happened and how do I fix this?  I can't access any of my music now.

    I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found.  What happened and how do I fix this?  I can't access any of my music now.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99460)

  • TS3899 I keep trying to update my mail inbox but keep being told connection to the server has failed.

    I keep trying to update my mail inbox but keep being told connection to the server has failed.

    Quit the maill app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or go to Settings>Mail, Contacts, Calendars>Your email account >Mail>Off. Restart the iPad and go back to settings and turn mail on again and see if that works.
    Or try this as well ....Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Twitter: Your upload has failed - always

    When uplaoding a photo with a tweet, I always get following error. I attach the photo, type the tweet and send. It tries to upload and after a few seconds get this error.
    "Your upload has failed."
    I'm using Twitter 10.2.1.2 on Q10.
    Any suggestions?
    BTW, it fails on Wifi, it fails on cellular network and it fails on 3 different isps.
    Moreover, the plain text tweets are going up just fine.
    Get Speedometer on your phone. http://www.speedometer.mobi

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive
    2) Reboot
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • The connection has failed while creating a New Repository using Oracle BI 11g Administration Tool

    hi
    In the BI Administration Tool when i try to create a “New Repository…” faced The connection has failed I try all of these solutions but dident work..
    1-configured my “System DSN"
    2-enter “TNS_ADMIN” for the “Variable Name” field and for the “Variable Value” enter the location of my OBIEE
    3-copy the sqlnet and tnsnames.ora files into E:\obiee11gtmt\Oracle_BI1\network\admin and E:\obiee11gtmt\oracle_common\network\admin
    4- put this in DSN with connection type OCI 10g/11g (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = IP Addr)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ))
    please help me
    regard

    1.Place tnsnames.ora file in the following paths,
    E:\obiee11gtmt\oracle_common\network\
    E:\obiee11gtmt\Oracle_BI1\network\admin
    2.Navigate to
    E:\obiee11gtmt\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup\
    Open user.sh file in a notepad
    Set Tns_names paths as shown below with your tnsnames.ora file’s location,
    set TNS_ADMIN=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN
    The above path is of your installed Database tnsnames.ora file
    I guess you didnt do this step. This will solve your issue.
    Restart all the services
    If helpful, please mark the answer.
    Srikanth

  • My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?"

    My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

    Hello buddyacw
    You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for