Issues using the signature function of mail

I am having trouble using signatures on several imacs at the workplace. My coworkers and I have all put in our signatures but cannot select them for use in any emails. These computers are all linked to the same email address but we each are hoping to use a different signature when we send mail out.
Any suggestions would be greatly appreciated.
Thanks,
Alex

Nevermind, I'm a dummy lol

Similar Messages

How do i lock all fields without using the signature function with adobe lifecycle designer 9

How do i lock all fields without using the signature function with adobe lifecycle designer 9 ...
I want it to have the same affect as when a signature is used but not use that function. I want a button that says lock all fields. And then you can click it again to unlock all fields...
Thanks

Here you go!
LOCK the form once its SAVEd?

When using the search function in mail I only see results from the current year. how can I see results from all years?

When searching mail results only contain messages from the current year. I'd like to see results from all years. This just started after upgrading from Snow leopard to Lion.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

I am currently away from my MAC and want to send an email through apple mail with the bcc functionality. I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help. Thanks!

Open your mail,
lower left corner click on settings,
go to composing and check BCC, save and your done

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

Hi howe.sc,
When I checked for how signatures in Yosemite work, I found this.
Mail (Yosemite): Include signatures in messages
Delete a signature from a message: Select the signature, then press the Delete key.
Replace a signature in a message: Delete the existing signature, then add a different signature.
That sounds similar to what you are describing.
Take care,
Nubz

I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"

TS1398 I have an iPad mini, because of my work network firewalls I am not able to use the airprint function to print. I was told you can direct connect to a printer. I am not sure how as I have not seen any cables for a lightning connection to a printer c

I have an iPad mini, I am connected to my work wireless connection. My printer also is on the same wireless network, however I am not able to print to my airprint enabled printer through this wireless connection. Is there a way to direct connect to the printer via a cable ?
I am missing something here on the connection. I am thinking possibly a firewall here at work will not allow me to use the airprint function. Help ?

There is no support for wired printing.
It is probably a firewall issue, possibly where all inbound communications are blocked. Since you're at work, I'd call your work IT department and find out from them what you can/can't do.

I have an issue with the address browser in mail in Yosemite

I am using IOS 10.10.1 now on an iMac and have discovered an issue with the address browser in mail.
Previously in my pending to send email toolbar there was a contacts icon which I clicked on to display my contacts list. I could hold down the Command button and select as many contacts I wanted (often up to 100), then select the field to send (to, ccc, bcc) and the contact would appear.
Now, I have to click the + sign at the end of the field line, and select recipients one at a time. Not only that, but I have to click twice to get to the email address, once on the name and then the email address drops down under the name and then I click on the email address. When I do that the drop down box disappears and the recipient's email address goes to the field. I have tried all combinations of buttons to be able to choose multiple addresses but haven't found the right one yet.
An Apple Support guy told me to open my regular Address book, and hold down the command button to choose multiple recipients then drag them to the field on my already opened send email.
This is one way around the issue (which wasn't an issue in Mavericks) but where some recipients have two or more email addresses listed in my contacts it means I have to manually go through the finished list on my emails to make sure the most desired one was selected. What a pain.
Also, previously, where I was sending out many emails and wanted to stop say half way down my list, and send, I could come back to that list for the next email and see where I'd got up to.
I don't want to make groups because my recipients vary depending on what I am sending so my lists change constantly.
Any suggestions?
Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
Cheers,

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

In OS Yosemite the search function in Mail, Finder, Spotlight- does not work

MacBook Pro (Retina, 15-inch, Late 2013)
2,6 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 750M 2048 MB
OS Yosemite,
Finder versión 10.10.1
Mail Versión 8.1 (1993)
In OS Yosemite the search function in Mail, Finder, Spotlight… does not work. Messages or documents with the search criteria are there and one could find them manually, but the search function fails to find them. Following advice from Apple Support (728965377):
1. I applied an Apple protocol for adware removal (Remove unwanted adware that displays pop-up ads and graphics on your Mac); I had none, because I had formally utilized a similar protocol that I had found in Internet, actually an app that implemented automatically Apple's adware removal protocol.
2. I rebuild the post boxes in Mail (Mail (Yosemite): Reconstruir buzones); It took a while but it functioned properly
3. I re-install the System (OS X Yosemite: Reinstalar OS X); It took about 4 hours but there was no problem whatsoever with the installation.
Afterwards I searched for messages in Mail, and documents in Finder and Spotlight, without any difficulty. The search function in all of them was working properly. But the next time that I needed to search messages or documents, an hour later or so, the problem reappear and a couple of new issues occurred:
1. in app RagTime 6.5.2 (Build 1821), www.ragtime.de, the menu bar disappears (it is invisible), when one performs certain operations, e. g., calculating a value with a formula, whether it is in a spreadsheet or some other component (text, drawing, etc.). After touching with the cursor the menu bar is visible again.
2. after reading an e-mail in Mail or copying an address, this is seeing as a floating object in the finder and over every application. There is no logical way to get rid of the floating object and neither copying or deleting or cutting it. It is not a big issue but nonetheless bothersome.
3. In Mail, messages with Flag or in VIP contacts cannot be seen in the appropriate folders, only in the Incoming mail folder, together with other messages. It seems to me, this issue is part of same search function problem.
4. The preview function within Mail does not show the attached documents to a message, whether it is in the IN, OUT or Draft boxes.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try again to re-index Spotlight. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Using the IF function with a range of numbers

I am working with the IF function and trying to get it to work "if" the number I'm examining is within a range of numbers.
Example:
If a wigit costs between $1000 and $1999, then a discount of $100 is given
If a wigit costs between $2000 and $2999, then a discount of $150 is given
If a wigit costs between $3000 and $3999, then a discount of $225 is given
And so on.
If cell A1 always holds the current cost of the wigit being sold.
cell B1,B2,B3 holds the value of the discount values respectively.
In cell C1 I would like to return what the current discount value is to be given for the wigit price in cell A1?
How do I do this using the IF function or is there another way?
Thanks,
Ryan

HI Ryan,
In this post you have, except for the issue noted by Badunit, the basis for the discount table described by Wayne:
I'm trying to devise a way of knowing what Cash Card a customer will receive depending on the amount of the purchase, based on the following table:
$0         to $999 purchase         =      $50 Cash Card
$1,000 to $1,999 purchase     =     $100 Cash Card
$2,000 to $2,999 purchase      =     $200 Cash Card
$3,000 to $3,999 purchase      =      $300 Cash Card
$4,000 to $4,999 purchase      =      $400 Cash Card
$5,000 to $5,999 purchase      =     $550 Cash Card
$6,000 to $6,999 purchase     =      $700 Cash Card
$7,000 to $7,999 purchase      =     $850 Cash Card
$8,000 to $8,999 purchase     =      $1,000 Cash Card
$9,000 to $9,999 purchase     =     $1,200 Cash Card
$10,000 to   UP   purchase     =     $1,500 Cash Card
To take care of the issue noted by Badunit, you need to revise the top line to state the minimum purchase necessary to earn a cash card, then add a line above that to handle purchases under that amount. I've arbitrarily chosen a $500 minimum, which results in these two lines:
$0             to $499 purchase        =      $0 Cash Card
$500         to $999 purchase         =      $50 Cash Card
To write this as Wayne's table, you need to remove all of the text (including the $ currency markers), the top end of each range, and the = sign. What you're left with is two columns of numbers: The bottom number of each range of values, and the number telling the dollar amount of the cash card for that range. Here's your table, edited to make it work with LOOKUP:
Here is a second table (Main), containing only the labels and the two cells involved in the calculation of the cash card amount. The Purchase amount is the amount used in your example. The Cash Card amount is produced by the LOOKUP formula below the image.
Purchase price is in cell B1 of the table "Main". The LOOKUP formula is in B2:
B2: =LOOKUP(B1,CC Amt :: A,CC Amt :: B)
LOOKUP acts essentially as you request in your post containing the iPad image with the time shown as 1:46. But it takes a much simpler approach.
Here's the syntax:
LOOKUP(search-for,search-where,return-from)
LOOKUP gets the search-for value (2535) from cell B1.
It looks in column A of the table "CC Amt" for the largest value less than or equal to the search-for value, and finds 2000.
It returns the value from the same line of column B (200).
Below are two more examples. Main-2 and Main-3 are copies of the Main table. Both contain exactly the same formula as Main, but have had a different Purchase price amount entered. LOOKUP uses the same CC Amt table as is used above, and returns the appropriate Cash Card value for each of the two new amounts:
You may, as implied in your 1:46 post, use a pair of cells to calculate the Cash Card amount for each widget in the purchase, then total the Cash Card amounts, or you may use a single pair of cells, one containing the total purchase amount, the other containing the Cash Card amount due for that total. That choice is yours. The formula is the same for either case.
Regards,
Barry

An issue using the COM components supplied with SAP GUI 6.2 or 6.4

We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4. We used to have SAP 4.6c and now we have 5.0. When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success. Now that we are on 5.0, we cant seem to instance any SAP functions that have something to do with SAP Workflow. We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
SAP Components used:
o     SAP Logon Control
o     SAP Function Control
o     Librfc32.dll
o     Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the Set objworkflow = objFuncCtrl.Add(strFunction) line of code executes. Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created. In 6.2, SAP raises no errors, but the object we are trying to create is still Nothing. If we use 6.4, SAP raises an error SAP data type not supported via a message box and then the object is still = Nothing. Interestingly enough, the 6.2 GUI COM controls dont display the error dialog. The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
Now, what is interesting is if we use the same code to call a standard function or custom function that doesnt have anything to do with SAP Workflow, then the code works fine. Again, all of our code used to work just fine on an SAP 4.6 system.
Here is the code that fails:
    'SAP Logon control - object for creating connections to an SAP system
    Dim objSAPLogonCtrl As Object
    'SAP connection object
    Dim objConnection As Object
    'Object that will represent the SAP function called
    Dim objSAP As Object
    'SAP function control object - object factory for creating other SAP function objects
    Dim objFuncCtrl As Object
    'Create instance of an SAP logon conrol
    Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
    'Create a connection object
    Set objConnection = objSAPLogonCtrl.NewConnection
    'Define connecion parameters
    objConnection.ApplicationServer = "sapvm"
    objConnection.SystemNumber = "00"
    objConnection.Client = "800"
    objConnection.User = "iissap"
    objConnection.Password = "tstadm"
    objConnection.Language = "E"
    objConnection.TraceLevel = 10
    'call the logon method of the connection object
    If objConnection.Logon(0, True) = False Then
        MsgBox Error
        Exit Sub
    End If
    'Create an instance of the SAP Function control object
    Set objFuncCtrl = CreateObject("SAP.Functions")
    'Set the function control connection object
    Set objFuncCtrl.Connection = objConnection
    'Function name to be generated and called
    Dim strFunction As String
    strFunction = <b>"ARCHIV_PROCESS_RFCINPUT"</b>
    'Create an instance of the function defined in strFunction
    Set objworkflow = objFuncCtrl.Add(strFunction)
    If objworkflow Is Nothing Then
        MsgBox "Could not create object " & strFunction
    Else
        MsgBox strFunction & " object created."
    End If
If anyone has seen anything like this or has any ideas, please help!
Mike and Hameed
<b></b>

Hi,
documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
This API is a replacement of the existing, obsolete COM interfaces.
Best regards,
Christian

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

No longer able to use the scan function on Photosmart c4780

Previously when I opened my HP Photosmart C4780 Printer Scanner I would get a dialogue box which allowed me to choose whether to print or scan. This dialogue box no longer starts and I no longer get the option to select scan and can only choose to print. I have been around the circuit of Print and Scan and Doctor and have downloaded and reinstalled the appropriate software several times all to no avail. I can no longer find the software CD that came with the device. What do I have to do to be able to access the dialogue box which gave the opportunity to choose scan and specify the actions required?
Furthermore using Windows Fax and Scan will not work either, I simply get the message “Could not complete scan”.
The scanner does work as I can use the copy function perfectly well.

Hi @Jumbob
From your descriptions, it sounds to me like the issue stems from the software. Let's perform a comprehensive uninstall, clean things up and ensure updates are complete, then reinstall. Please complete the following steps and let me know the outcome;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Download the software and choose to save as, save to desktop > HP Photosmart C4700 All-in-One Printer series Full Feature Software and Driver
After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Note: If you have Windows XP or Vista, please use the download we saved in step 3. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Stack overflow at line: 1792 or 1788 when using the search function

Hello everyone,
My name is Thibault. I am a technical communications specialist. I've been using Robohelp html for a couple of years.
I am working on the user guide of the software application developed where I work.
This is a HUGE project, more than 6500 pages.
We're two technical writers on this project. (This is an inportant detail since my colleague doesn't get the problem).
I need your help because I have been having an annoying issue over the last couple of days.
After the project is generated, I open it in the software, clicking F1.
When I want to use the search function I have this error message displayed:
"Stack overflow at line: 1792" or "Stack overflow at line: 1788"
Do you know where this could come from?
Furthermore, I noticed that this stack overflow only occurs on some words.
I mean, it occurs for the most used words in this project.
We have customers all over the world and over the last week, we've been getting a lot of feedbacks about this error message.
I hope someone will be able to help me on this one!
Thanks in advance!

First of all, thanks for your answer RoboColum(n).
Is the problem only when you search for a topic that contains Flash output?
All my topics contain Flash outputs. I generate my output files on a folder that is embedded into the software.When in the software, I click F1 and the Flash User Guide opens.The search function works (or not) depending on the software version (32/64-bit).
At what point exactly does the stack overview occur?
We have two versions of the software a 32-bit version and a 64-bit version.
The search function works fine with the 32-bit version.
The problem occurs when I use the 64-bit version. When I type in a word, for example "unit", the stack overflow message appears. See below:
As you can see, it looks like the search function freezes while the stack overflow message appears.
And I never get this error message with the 32-bit version of our software.
I also wonder whether you can search on a project that contains no Flash output. Perhaps you could try for us?
What do you mean by that?
As I told you previously, my Flash Player version is a 32-bit one.
Do you think that the issue might come from there?

Using the Clip function of an AP-Element

This is a follow up question to my previous post asking about
opening external links within my site.
After taking some good advice on embedding the image in an
HTML doc on my site and then calling this page from the navigation
bar.......I'm now on the trail of embedding the image in an
AP-Element so I can then do my RHS or LHS justification using the
clip function. In principle I've had it working once on my exisitng
home page, but as soon as I try creating a new Doc and embedding
the AP-element the clipping fails to work. If I clip the LH corner
of the image it diplays correctly in the designer window, but as
soon as I go to the browser preview it reverts back to an unclipped
version of the image.
This is what I'm doing:-
1) I create a blank new document
2) I then add an AP Element by Insert|Layout Object|AP Div
3) I then resize this to a reasonable size on the page and
then insert an image
4) I then click on the AP-element border and go to the Clip
property and set up to clip the LH corner of the image
When I then look at the designer window, it correctly shows
the clipped LH corner as expected. But as soon as I preview it in
the browser it reverts back to the full size image.
Any guidance would be most greatfully received.
Thanks,
Neil

Tell us again why you are clipping the image, please?
Also, AP elements cannot interact with any other elements on
the page
because the fact that they are absolutely positioned removes
them from the
normal flow. So, if you are seeing movement that you
interpret in this way,
you are not interpreting it correctly - most likely you have
other issues on
the page. Finally, editable regions are NOT layout regions -
they are
content regions. If you are seeing 'editable region' issues,
then look to
your page's code and the HTML infrastructure there, not at
your template
region markup.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"CS4Rookie" <[email protected]> wrote in
message
news:gqnrea$1d$[email protected]..
> Ok, I have part of the site running now so you can see
what stage I'm at.
>
> I think the AP element clipping works ok for what I'm
doing, but it does
> pose
> problems with a large clipped image as I need to select
a different
> clipping
> area for each side of the image. When I do this I then
need to move the AP
> elemnt around in the page and this seems to create
editable region issues
> due
> to it being a wide image.
> Again, this is probably due to my inexperience, so I
guess I'll sort it
> out if
> I put enough time in.
>
> Thanks for your comments and support so far.
>
> Neil
>

Issues using the signature function of mail

Similar Messages

Maybe you are looking for