Issues with Edge loading slowly and Not filling its space until loaded

I am in the last stages of wrapping up a new website and have a nice Edge Animation slated for the top of the home page. The content, which includes a poster is published. However, when the page loads there is a lag before the animation fills its designated spot.
I tried using a preloader but then the entire content of the animation appeared behind the other content - making matters much worse.
In order to reserve a spot I tried creating another div with a background image as a placeholder, but because this content is responsive horizontally and vertically the placeholder locks the content into a predefined space and is not properly responsive.
I optimized the content to cut down on load time (not sure why Edge doesn't do the optimizing), but it is still not enough to resolve this issue. I would really appreciate some insights.
Thanks.

I think it is fairly safe to say that I have been completely ignored on this one.

Similar Messages

I am increasingly having issues with clicking on links and not going anywhere with Firefox. When I paste the path into Internet Explorer it often works. Why?

I have always preferred Firefox, but am getting quite annoyed when I click on Google links and don't get to the site. I thought maybe the sites were down, but then started pasting into IE and actually getting something. For example, today I clicked on a link from Harry and David to redeem a free magazine subscription to Food & Wine. I tried it multiple times, then tried it with IE and it worked right away. I don't know if it is just the latest version of Firefox, this seems to have been happening more and more for a while.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Issues Missing files & duplicate files and not enough screen space

Hello everyone,
I'm using a 1.67 Ghz 15 in tibook with 1 gig of ram
I had issue yesterday, missing files, I was in the rating/keywords panel scrolling through my images, one was a bit soft so I deleted it using the command delete combo. Somehow all of the images in the project disappeared. They hadn't been moved to the trash, I looked, and looked and looked, I couldn't find them using a search, and it should have been easy, they were the first images that had been imported into Aperture.
So since I had copied the 70 files to my hardrive first I re-imported them. Couldn't see those either.
Deleted the project and re-imported again, worked fine, and I couldn't reproduce the problem.
When I went to export five images, (all the images had been re-named with a sequential suffix, Smith_01, Smith_02, Smith_03...), to my desktop so I could copy to our server, I remembered that I needed to update a caption on one image. (Could that caption box be any smaller?), anyway I exported again, I meant to only export the individual image but exported all five again. Instead of telling me there were duplicate files on the desktop it increased the sequential number of each duplicate file by 1. So now instead of one file of Smith_01, Smith _08, Smith 33, etc, I have the original and the Smith_01 file now has a matching image slugged Smith_02 on the desktop as well, along with all the others that had a match with a suffix one digit higher. And of course back in the project there is a Smith_02 that is different..
If I were to copy different files with the same name to other folders or our archive server one of those images could be easily discarded or copied over by the file with the duplicate name.
And lastly, when importing I tried to rename my files and add a generic caption, I imported the same images a few times, the first time I couldn't scroll down to see the caption box and metadata, the second time I could see the scroll and add the metadata below. The third time I couldn't scroll down. Very Wierd!
And lastly, is there any way to show just the adjustments or just the metadata boxes on the Adjustments & Filters layout? The boxes are so small already I'd like to be able to at least use the whole side of the screen for one box. I'd really like to be able to put them where I want them. The adjustment HUD works this way on a full screen but I want to get rid of the strip of thumbnails in the full screen and just have the HUD and the image, nothing else.
Any insights would be great.
Thanks,
Craig

Hello everyone,
<...>
I had issue yesterday, missing files, I was in the
rating/keywords panel scrolling through my images,
one was a bit soft so I deleted it using the command
delete combo. Somehow all of the images in the
project disappeared. They hadn't been moved to the
trash, I looked, and looked and looked, I couldn't
find them using a search, and it should have been
easy, they were the first images that had been
imported into Aperture.
I think they were in the trash - as far as I know search does not work within the trash itself.
Nope not in the trash, that's the first place I looked, I also found that deleting a project is the fastest way to export the masters. Just pull them out of the trash can
They should have been moved to the trash folder, inside an Aperture directory, and then from there inside of a folder with the name of the project the image was in.
Alternatley (and I'm not sure how this migh thave happened) they may have been marked as "rejected". All views have a default search >>criteria that starts with "unrated or higher" but rejected photos are lower than this and are not seen. By default there is a smart folder at the >>top of your library that shows Unrated pictures, you might check to see if they are there.
I'll double check the shortcut for rejects, this is the only plausible explanation, but it doesn't explain why the second import of images couldn't be found either.
So since I had copied the 70 files to my hardrive
first I re-imported them. Couldn't see those
either.
Deleted the project and re-imported again, worked
fine, and I couldn't reproduce the problem.
Well, I'm sorry to say I have no theories to offer there. Just glad it worked eventually!
When I went to export five images, (all the images
had been re-named with a sequential suffix, Smith_01,
Smith_02, Smith_03...), to my desktop so I could copy
to our server, I remembered that I needed to update a
caption on one image. (Could that caption box be any
smaller?), anyway I exported again, I meant to only
export the individual image but exported all five
again. Instead of telling me there were duplicate
files on the desktop it increased the sequential
number of each duplicate file by 1. So now instead
of one file of Smith_01, Smith _08, Smith 33, etc,
<...>
Yes, Aperure will refuse to overwrite any file ever - and will always add those other numbers if it encounters a file with the same name as the one it is trying to generate!
I agree that this is a good thing, but there should be an alert of some kind if you have a duplicate. The finder certainly tells you if you are trying to copy a duplicate file to the same location. Adding an increment of one to the sequential suffix without an alert is very poor planning. On deadline trying to get files into our system I could have easily overlooked the duplicates and overwritten other files with the same name.
The only way to work around that is either to delete all files from the directory before you export from Aperture, or to export to an empty directory and copy them over yourself.
The work around is easily figured out, but like some other things I shouldn't have to work around it.
<...>
And lastly, is there any way to show just the
adjustments or just the metadata boxes on the
Adjustments & Filters layout? The boxes are so small
already I'd like to be able to at least use the whole
side of the screen for one box. I'd really like to
be able to put them where I want them. The
adjustment HUD works this way on a full screen but I
want to get rid of the strip of thumbnails in the
full screen and just have the HUD and the image,
nothing else.
Well, another option there would be to drag the divider between the metadata and the adjustments all the way up (as much as you can >>anyway, the histogram will still be visible).
That would be wonderful, but I'm on a 15 in ti book and there isn't enough space to do that. The divider show up but you can't move it. Ideally you should be able to just view the metadata or just the adjustments if you so choose. Binding them together is stupid, if I'm making adjustments, I don't care what is happening in the metadata screen and when I'm adding captions and changing metadata I don't need to see the adjustments screen. Give me a metadata template like the IPTC screen in Photomechanic that I can save and apply and put it on the screen where I want it.
Then to see adjustments just use the adjustment HUD - key "H" to bring up or dismiss. It will stay where you put it when you make it go >>away and come back and you can have it whereever you like on the screen unlike the inspector.
I'd love to do that but it can't be done on a 15 in laptop screen.
For maximum space value, you could arrange the Adjustments HUD to exactly overlay the space where the Inspector is - then you can press >>"I" to make the inspector come and go, and "H" for the Adjustments Hud all in the same space.
For maximum space on adjustments I'm using the full screen with the HUD. At least I can then move the HUD where I want it to be, not anchored on the right side.
In general look over the keyboard shortcuts as there are a lot of keys to make panels come up and go away quickly (one key, no modifiers) >>which really helps to maximize use of screen space.
I'm still learning them and I'm sure that will help, but the adjustments panel and the metadata panel have to be changed to make it more usable on a laptop in my opinion. Maybe it's fine on a large monitor, I wouldn't know as I can't load it on my G5 desktop without a hack. And so far I'd rather use Photomechanic for sorting and captioning it's much much faster for newspaper work.

After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!

Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- Try the remaining items of:
iOS: Troubleshooting applications purchased from the App Store

Hi have the ipod touch and having issue with the reminders app. do not have the reminders page just the completed page

hi have the ipod touch and having issue with the reminders app. do not have the reminders page just the completed page

The problem has been fixed with the most recent OS X software update.

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

Issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4

Since upgrading to the final version of OS X 10.10 Yoesemite I have issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4. I don't recall their being any issues while I went through the Beta testing process. The Adobe products (PSE and PE) give me a configuration message "error 16" and it tells me to uninstall and reinstall. I have done this a few times/ It seems to go through the whole install process until the startup where it crashes. I downloaded PSE 11 and at least it starts up but I haven't used it to do anything. Also DiskWarrior 4.4 does not load up from the hard drive anymore (error message) and when I boot it up from disk is doesn't give me the option of correcting permission when repairing files and folders.
At lease all of otheother software including Photoshop Lightroom 5.6 seem to be working.
Very sad

Barbara,
Yes, I accessed the "updates" menu from the Help pull-down menu. I also accessed the updates using the Mac Terminal application with results shown in my original post. Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
Update Failed
   Updates could not be applied
   The error log file may help you in identifying the problem. The, try updating again. If the problems persist, contact customer support for further assistance.
The error log file read as follows:
   Photoshop Camera Raw 8.5
   There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
   Looking at the the output of the Mac Terminal app, it shows:
   ... hdiutil: attach failed - no mountable file systems
   Is this relevant?
Regarding your follow-up message pointing to:
Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
Thanks

However, we've had issues with other legacy systems and programs for outlook

I have a user who when she logs into her workstation and tries to access her outlook folders she is denied access. If she removes and then adds them back they work. Only one other person on our network had this problem which I initially thought was connectivity
related. I replaced their cat five cable and that seemed to solve their problem. I tried this with this user and it cleared up for about a week but happened again today. Any thoughts or experience with this. Outlook doesnt support archives in a network share
so I cant turn to them. It uses a login batch script to load mapped drives according to department. This all predates me so I did not build them. However, we've had issues with other legacy systems and programs so it is highly possible that this could be an
issue.

Will:Hi! Hi!
I use Firefox and it is now No. 1 on my choice of browsers. I agree it doesn't like the "for IE only" coded sites but then IE is now a non issue as it is dead in the water! So Safari is now really bloated and getting slower by the version. Firefox is quick, good to look at with numerous skins, and what is more has become the browser of choice for web developers on both platforms because it sticks to the WWC3 code. Camino is just another flavour of Netscape which seems to be a bloat AOL IE wannabee product. Do yourself a favour and download Firefox. Give it a few spins around the block and I'm sure you will agree. As for the sites it declines to accept because of bad code, then I would suggest a strong letter of protest to the webmaster! For too long IE has been flouting the rules and trying to be the only game in town. Take some affirmative action and let the webmasters know there are other browsers available to users. If you are still not a believer then check this out:
http://www.pcworld.com/reviews/article/0,aid,118959,00.asp
May the force be with you!

TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

Sync issues with iPhone 6 Plus and iTunes

I'm having issues with syncing my iPhone and iTunes.
I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied). The longest this has occurred for is 2hrs. After this time I have stopped the sync and ejected my iPhone.
I had another issue with my phone when playing music. When going to play music, I was given the error message saying that the song could not be found. I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'. I found the song and could see that next to the song was a small what looked like dotted grey circle. After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song. I did this and this was when the issue occurred again.
I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again. This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone' tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play. All played ok.
I have read lots in the Apple forums about lost of difference reason this may be happening. Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it. My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
I all so had this issue with my old iPhone 4S. The problem occurred when running iOS 7 and 8 on the 4S. When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app. However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
I am in contact with Apple Care, but this is such a long process.
So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful. Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
I will update my post with any information provided by Apple Care as and when I get it.
Thanks for reading and thanks for your time.
Mark.

Hi,
Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
Firstly I just want to updated my details about what version of Mavericks I'm running. I'm running 10.9.5 - I put the wrong version down in my original post.
So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices.
The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem. For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD, this was added and encoded with the version of iTunes that was running at the time of adding the music. So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version. However, due to the amount of music that I have, this is going to take a long time. When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone. This may just have been luck though at that time.
Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on. The only down side to this fix as far as I can see at the moment, is that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
Thank you all for your comments.

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

HT1349 Has anyone had issues with the iphone 4s and facebook.

Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

@razmee: rather unhelpful.
@tata - we're having the same trouble, and the only solution we've found doesn't fix it.
1) uninstall
2) login on PC/MAC and change password
3) reboot iphone
4) install facebook app, reboot again
5) login from iphone.
No joy.
Safari works, but not for the apps.
Of course, it's Facebook that has to fix this.

Issues with Edge loading slowly and Not filling its space until loaded

Similar Messages

Maybe you are looking for