Issues with ingesting MiniDV tapes in synch

I am currently ingesting a ton of MiniDV tapes for a project but keep having synch issues. Image and sound will be in synch for the initial portion of a clip, but will eventually fall out of synch. Any ideas as to how to fix this problem? I'm working with CC Adobe Premiere on a Mac.

In the old days (ahum) when we had sync problems we did not capture longer then 10 minutes in one take.
Try to capture with scene dectection on.

Similar Messages

  • Issue with Google Contacts : birthdays not synching correctly

    I have an issue with Google Contacts synchronising to my iPhone. For some reason, the birthday on the iPhone uses the previous day for displaying the birthday.
    For example, if I put the birthday of December 30, 1987 for a contact using the online Google Contact manager, it will sync to my iPhone correctly as as December 30, 1987.
    However, if I update the contact on my iPhone (change address, add website, change phone number...), the birthday jumps back in time 1 day (in our example it jumps back to December 29.
    If I edit a contacts details on the iPhone both Birthday and Anniversary skip one day back in time after the Sync occurs. This will happen every time I edit the contacts details so if I start on e.g the 30th of Dec after one edit the date will be the 29 Dec then after another edit the date will be the 28th etc...
    I can then edit the date(s) in Gmail Contacts and they will sync correctly back to my iPhone. Only when I edit a contact on the iPhone will the date(s) skip a day back.
    The region of my iPhone is set to "Belgium"
    Timezone is set to "set automatically"
    How can I solve this conundrum?
    Message was edited by: dbuvens

    Have you checked your time zone within your Google calendar settings? (http://www.google.com/calendar/) It's just an idea ...
    I myself found several issues in syncing my contacts with Google (over the air via ActiveSync / Exchange on iOS4 as well as using the API within Address Book / iTunes) with truncated names (e.g. prefixes and suffixes) and re-arranged addresses (german scheme vs. US-scheme: post code, state) and can't recommend the Goole services for users outside the U.S.

  • Multiple OS issues with Email set up; "People" ; Synching phone not working as advertised

    Nokia Lumia 822
    Purchased yesterday (2/10/13)
    So far I have spent 14 hours attempting to resolve what feel like endless errors and bugs. If I can;t get these resolved in the next 48 hours the phone goes back. I am so disappointed  I waited especially for this phone - heard great stuff. My experience is it sucks. Worst phone ever.
    1) POP3 email accounts are non functional. I have attempted to set up and delete and re-set up now multiple times. Each time presents a fresh new nightmare.
    Issue 1 - Email account  receives email but will not send. Error message goes something like  <" Problem sending message. Message failed to send. Problem with Files or Data on your device." >
    Issue 2 - Tapping email + accounts sends me back to start screen cannot even set up account
    Issue 3 - I  get to add email account I enter my information but no account is created
    Issue 4 - I set up an account and I get an error message stating my information cannot be found.
    Issue 5 - trying to open email from start screen just resets to start screen  over and over and over NEVER opens the account.
    These are deal breaker issues. I have multiple email accounts on different platforms. If I cannot access my various emails AND send from those accounts this is NOT the phone for me.
    2) PEOPLE does not function. ALSO multiple various issues and never the same one twice.
    Issue 1 - I tap on a contact and get sent to the start screen over and over and over  and over again.
    Issue 2 I tap on a contact and the phone freezes and wont respond unless I pull the battery
    Issue 3 I open a contact and make an edit, save the contact but the change is never reflected in the list
    Issue 4 I try and search for a contact and the search freezes - only option is to return to start screen
    3) Scrolling thru any APP randomly takes me back to start screen.
    I dread attempting to synch Outlook calendar and contacts on my PC to hotmail - especially if I can't even set up email. And it seems like even holding it will jettison me out of anything I'm doing and back to start screen.
    If I can't get these issues resolved.  look like I'll be going  back to my 3 year old Blackberry Bold which performed flawlessly. It may not be the most impressive phone out there but it did what I needed it to do with out any issues.

    Interesting Twitter conversation VZWSupport on Twitter.  It was suggested to try a HARD reset - and if that doesn't work take the phone back.
    Since I don;t have anything set up yet  that's my solution.
    I see a BlackBerry Z10 in my future

  • Issue with printing to tape

    I am running 10.6.2 and Final Cut Studio 2 (FCP 6.0.6). FCP recognizes the deck and with playout to the deck while editing from the sequence. Once I try to print to tape deck drops out and there is no audio or video coming into the deck. Tried different projects that printed to tape just fine and they all have the same issue. Tried two other decks and same issue. Tried one of our other Mac Pros which are setup exactly the same and had the same issue. The projects tried lived both on internal drives and on external firewire drives.
    Once I print to tape monitor connected to the deck goes gray and have no audio but the sequence still plays out on the desktop monitor fine. Tried changing deck settings but nothing helped. Once I refresh A/V devices preview out to the deck starts working fine again. Thinking that it maybe an update issue since it is happening on two different machines with different projects.
    Has anyone had a similar issue recently?
    Any insight would be much appreciated.

    Have you done the usual - Trashing preferences and repairing permissions?
    Under the Audio/Video Settings menu, A/V Devices tab, is your Playback Output setting the same as your Edit to Tape/Print to Video setting?

  • Can anyone help with a compatibility issue with EZ vinyl/tape converter?

    I have been using EZ Vinyl/Tape Converter in conjunction with an ION turntable to transfer all my old vinyl into iTunes.
    I have had no problems until the latest version of iTunes was downloaded and installed.
    Now, if I attempt to import a track using EZ, it tries to import into iTunes for a couple of minutes, before giving me an error message which says "Make sure all active windows in iTunes are closed".
    I have no idea what this means, because I'm doing nothing any differently to what I've always done.
    Can anyone suggest what might have changed?
    Thanks in advance.
    Mel

    i have same problem too any suggestions anyone pls have so much music with vinyls to keep help

  • Prelude CC - Issue with Ingest and renaming

    I am trying to ingest with Transfer, Transcode, and File Renaming features on my imac.  The files are being transferred and transcoded properly, HOWEVER, file renaming is not working.  In addition, the files are not appearing in the Project pane in Prelude after they run through Media Encoder.  I also don't see the ingesting status bar during the ingesting/transcoding process.   I can see it running and working in Media Encoder, but no progress bar activity in Prelude.  
    Any ideas anyone, please help, ha.  Much appreciated.

    Wes,  To answer your questions:
    Format of my source is AVCHD from a Panasonic AG100. 
    Preset being used is ProRes 422.
    Renaming worked when i ingested with renaming disabled, renaming does not work with transcoding enabled.
    Transcoding/transfering to a different location.. as in a different folder, same hard drive/server. 
    An additional computer at my office works fine Transcoding to Prores in addtion to file renaming.  I am puzzled why the problematic computer is not fucntioning the same.  It appears it is something with on the transcoding end. 
    Thoughts? 

  • Synching Issues with Self-Paced Learning and Embedded Flash Files

    Hi Everyone,
    I'm having some issues with my files not properly synching or displaying when Self-Paced Learning is active.
    Here is my set-up:
    Captivate 5
    5 separate Captivate files combined using the Aggregator
    Each Captivate file is about 15 slides
    Each slide contains an audio file (for closed-captioning) and a single SWF file - the content is all created with Flash and then inserted into Captivate using Insert > Animation
    Each SWF file is back 1/10 of a second from the beginning of the Cap timeline (otherwise there are rewind issues when the user selects the slide they are currently viewing from the ToC)
    Each embedded SWF has the beginning and ending fade built into it; Captivate is not doing any fading
    Synch to Project is selected for each embedded SWF (although it doesn't seem to work all the time)
    Self-Paced Learning is active, as well as, Enable Navigation
    It is not being loaded to an LMS or using any built-in Captivate quiz features.  These are instead custom built AS3 Flash files that are embedded.
    Windows 7, 4GB RAM, 1GB Video Card, High-end Processor, etc... a beast.
    The Issue:
    When the user opens the course, views it for a while and then closes it and returns it will display the first slide of the course for a moment before jumping to the bookmarked slide.  This slight timing misstep causes the bookmarked slide to get out of synch.  It will sometimes not display the bookmarked slide at all or it will cut-off a small bit from the end of the slide (even with Synch to Project active).  It sometimes works fine but randomly will break.  The course is set to 100% preload and nothing is being loaded from an external location.  It seems to work fine until Self-Paced Learning is activated.
    I don't think this is a common development approach for Captivate but it has been very successful with some clients.  Has anyone encounted similar issues or does anyone have some suggestions that might resolve this problem?
    Thanks!
    Greg

    It's been mentioned many times on this forum that nesting Captivate SWFs inside other Captivate SWFs gives rise to all kinds of strange issues.  Captivate was not designed to work this way. If you choose to do it, and you encounter issues (as you have done) there's usually NOT a lot you can do.  There are just too many ways the SWFs can get into bun fights over which one does what.
    I suggest you rethink your approach to avoid nesting.

  • I have a sync issue with any songs name track 1 or 2 so on ..even though my itune shows I have the play list right but after i sync the same 20 tracks play very different tracks, it doesn't happen when I sync other songs that actually have names

    I have a sync issue with my ipod, anytime I synch a playlist that has generic song names instead of actual names like track 1 or track 2 so on even though my itune library shows and plays the song, but after a sync my ipod will play a different song. Never happnes if the playlist has actual song names, than everything is fine..!!!!Any help?

    If I understand you correctly, when iPod play the Track 1, a different song is played, what is the name of this different song?

  • Tap to click not working properly in Mountain Lion. How do I get apple to fix this major issue with mountain lion?

    The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse.  The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?

    Perhaps, I was not clear enough.
    I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
    Recently, I just purchased a macbook pro retina with Mountain Lion
    On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
    On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
    I am truly surprised that no one has noticed this MAJOR issue.
    Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
    On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
    Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
    In fact almost all of the trackpad functions have been selected.

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • MiniDV Tape issues

    Hi.  I am using P-Pro CS4, and trting to capture miniDV tape without the jagged edges (interlace?).  When i use the de-interlace filter the image is unacceptably soft.  Can someone help with steps, from the beginning on how best to capture and work with minidv tapes keeping the near broadcast quality and no jagged edges?  Thanks!

    Hi All,
    I am not sure how to answer some of your questions.  I am not at a computer with Premier  pro, perhaps i should hold this until I am (also, in a few weeks i will have CS6 at work, now I have nothing). 
    It could be that I am setting up the project not to match the video (?).  Also, I guess this has really been done on SC5 (I forget i did most of it at school, at home I have CS4).
    What is "SD"?
    I did not realize that the Canon GL2 gives me much choice in how it shoots, it is digital, but not HD.  I never saw anything about "shooting interlace" or not.
    So, the tapes were transferred onto the computer in a tape deck, I assume it is attached via firewire.  I always wondered if I could do this without going through Premier Pro?  As I mentioned, I am not there and cannot recall what the project settings were.
    Is there different miniDV camera-setting?  Should therebe just one "best' setting for minDV tapes?  Can anyone enlighten me?
    So, the files are .AVI and that's when they look jagged.  I put one file on a computer at home, attached to my 55inch LED and they still looked jagged.  I assume these are "raw" files?  That is unprocessed?  Maybe I am doing this part all wrong?
    The final product will be for DVD, but if it is good enough, maybe for a TV broadcast.  Doesn't this get decided in the "export' after i am done editing?
    I am just at a loss as to why it plays back with thesedges.  I don't think it did that with the old monitors.
    So, if anyone can tell me about the settings, i will double check next time i am at capturing.
    Thanks.  Let me know if more info is needed.
    Richard

  • Audio Sync Issues with Long Clip

    I am about to start editing a multi-cam concert shot on 5 DVX100 cameras without Jam sync TC.
    In the past i have had issues with sync when digitizing long clips. is this still the case with FCP? Can i safely digitize 45-60min clips?
    I am using a Pro-sumer Panasonic MiniDV Deck for capture. (it is on FCP's 'suppported devices' list)
    on the avid i would digitize full tapes to make the Grouping (Multi-clipping) much faster. I want to avoid capturing a bunch of small clips on FCP and then sync them individually.
    any info is greatly appreciated.
    best
    Mustafa
    Dual G4 Tower, 500g ATA internal, bunch o' Firwire 400 Drives; PowerBook Titanium 1GigProc/1GRam   Mac OS X (10.4.7)  
    Dual G4 Tower, 500g ATA internal, bunch o' Firwire 400 Drives; PowerBook Titanium 1GigProc/1GRam   Mac OS X (10.4.7)  
    Dual G4 Tower, 500g ATA internal, bunch o' Firwire 400 Drives; PowerBook Titanium 1GigProc/1GRam   Mac OS X (10.4.7)  
    Dual G4 Tower, 500g ATA internal, bunch o' Firwire 400 Drives; PowerBook Titanium 1GigProc/1GRam   Mac OS X (10.4.7)  

    DEAD ON THE MONEY. And yes, you can do it with the HVX. This is a really cool thing. There is a gotcha-- the dvx and hvx have an internal battery that allows for the retention of things like timecode when the camera is off. You gotta be sure that battery is charged. And the way you charge it is to attach the ac adaptor and plug it into the wall with the camera off for an hour or two.
    Once all the cameras are running with freerun code, you can swap batteries etc and the code just keeps going.
    Another thing- when you set up your camera pile, you've got to stand a couple of feet in front of the pile when you hit the remote so that the signal gets to all the cameras.

  • Issues with iMessage when switching data carrier (wifi - cellular)

    So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

    Hi there BigDogg795,
    I would recommend taking a look at the troubleshooting steps for iMessage found in the article below. 
    iOS: Troubleshooting Messages - Apple Support
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    -Griff W.

  • Unable to properly capture HD video from miniDV tape in FCE

    unable to capture HD video from miniDV tape
    When I connect my Sony HDR-HC3 miniDV HDV camcorder to my iMac via firewire cable and use Final Cut Express to capture the video from the tape, I do not get a Capture window that allows me to specify in and out points, I just get a playback window that immediately starts capturing and the only option I have in this window is hit ESC to stop capturing. If I let this capture window continue to capture the video from the camera with miniDV HD tape, then the entire tape would be captured as one massive single video clip.
    QUESTION: Is there something I change or do to make the proper capture window appear where I can specify in and out points to capture from tape for each clip?
    NOTE: using same camera and tape with iMovie with automatic capture enabled, all the clips get captured properly. I also tried to use the manual setting in iMovie and it worked too.
    More details(read only if you want more information)
    I have a several miniDV tapes containing HD video created on a Sony Sony HDR-HC5 and Sony HDR-HC7. Unfortunately, both these camera were stolen, and I have since moved to a camera that uses flash memory, not tape. However, I need to get the video footage off these tapes, so I bought a used Sony HDR-HC3, it plays the HD miniDV tapes just fine and iMovie reads the video from this camera just fine, but Final Cut Express does not.
    When I setup Final Cut Express, I used the Easy Setup and specified:
    Format: HD
    Rate: 29.97 fps
    Use: HDV-Apple Intermediate Codec 1080i60
    These setting match those of the camera and recorded tape. If I use any other settings but these, then Final Cut Express never sees the camera and never opens any capture window at all. Using Quicktime 10 movie inspector on the clips captured by iMovie from same camera, all the clips match this setting too.
    Final Cut Express version 4.0.1
    iMovie 09 Version 8.0.2 (821)
    iMac 2.93 GHz Intel Core 2 Duo with 4GB 1067 MHz DDR3 running
    Mac OS X Version 10.6.4
    My Final Cut Express scratch disk is a Seagate 2TB external USB 2.0 Hard Drive that has been formatted to be Mac OS Extended (Journaled). This external disk is also where iMovie successfully captured all the video from the same camera.

    Thanks for the answer. It makes me sad. I thought using Final Cut Express would be an upgrade to a more robust editing system from iMovie, yet iMovie does a superior job of logging and capturing video from HDV video on miniDV tape in comparison to FCE. Not only does iMovie capture each clip on the tape into it's own video file automatically, it also includes timestamp information in the filename indicating when the clip was originally recorded, which appears to be something that is missing from Final Cut Express. Now I realize that HDV miniDV cameras had a relatively short life span in the consumer marketplace and have since all been replaced by flash and hard drive based AVCHD cameras, but from circa 2004 to 2007, miniDV HDV camcorders were very popular and I am sure there are lots of consumers that must be super frustrated by Final Cut Express limited ability to log and capture clips properly from these cameras.
    Assuming I do not want to make a rough cut of video in iMovie and prefer to begin my editing project in Final Cut Express (not doing XML export of iMovie project), I need to determine the best way to get clips captured via iMovie into Final Cut Express and determine if there is anything inferior in the iMovie captured clips that I need to be aware of. So far it appears that both iMovie and Final Cut Express reduce the 5.1 surround sound captured on the HDV miniDV tapes to stereo sound, which is not a big lose given the 5.1 sound was recorded from camera's built-in microphone, but it makes me wonder if the video is reduced in any way by the iMovie import process, examining the video in quicktime's inspector window the video appears to be the same in both iMovie and FCE, but I'll research the answers to these questions elsewhere on this forum and post additional questions if I do not find the information I need.

  • Issues with iTunes Media Folder resetting to default location

    This is my 1st post to the Apple Support Community (the problem I have is with iTunes, but I believe it also has to do with the way OS X Lion is setup and the way Networked Drives are mounted in it) ...so I hope I've posted this to the correct place. Thank you in advance for any help I'm going to get here. I have no expirience with Mac OS X's (coming from a Windows background) so please bear with me, but I am a S/W Tester by trade so I'd like to think I'm resonably IT literate.
    ISSUE:
    I have a problem with iTunes and my Media Folder resetting constantly - my Setup is a MacBook Air, with an Apple Time Capsule 2TB which is providing my Wifi Network.
    I want to setup iTunes so that it will permenatly point to my Data Folder on the Apple Time Capsule, so that when I download purchases, synch iPhones, or rip Music it will end up on the Apple Time Capsule and not on the MacBook Air's SDD Drive
    I though I had managed to do this, but after I shut down the MacBook Air, and then logged back in to rip some music, iTunes had repointed to the MacBook Air's SDD, and all the CD's i ripped were saved there instead of the Apple Time Capsule. So far I have done the following;
    STEPS CARRIED OUT SO FAR:
    1) Connected the MacBook Air to the Wifi Network provided by the Apple Time Capsule - I can see the Time Capsule in the Finder app.
    2) Gone to GO MENU > LOCATE SERVERS and selected the top level DATA FOLDER on the Apple Time Capsule....I believe that I've managed to create an ALIAS (Shortcut?) that points to this, and it's on my Desktop.
    3) Next I went to SETTINGS > USERS > and made sure that ALIAS (Shorcut?) to the DATA FOLDER on the Apple Time Capsule is always loaded up on startup for my UserID
    4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
    5) I then went to ITUNES PREFERENCES and changed the MEDIA FOLDER it pointed to, from the MacBook Air's SDD to the one on the Apple Time Capsule.
    6) Then I logged out and shut down the MacBook Air.
    7) I powered on the Macbook Air, and logged in, then ripped some music - I then found that iTunes had created a new iTunes Folder for my User on the MacBooks SDD and all the CD's I ripped had been saved there. Also under the ITUNES PREFERENCES menu, it looks like iTunes had reset the location of the MEDIA FOLDER...
    I don't know if this is an issue with iTunes or not - I'm assuming it's a setup issue on my part, and that maybe I haven't created a permenant link to the Apple Time Capsule as I thought I had. If it helps I was attempting to do something similar to whats described in this YouTube video; http://www.youtube.com/watch?v=mA399lEXRTE
    Thanks again for any help
    Regards
    Codename21

    Codename21 wrote:
    4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
    if you really moved your entire iTunes folder, the next step needs to be launching iTunes while holding the option (⌥) key, clicking on choose library at the prompt, and selecting the iTunes folder you moved to the TC.
    as for auto-mounting the TC's disk on startup, you might find this discussion interesting.

Maybe you are looking for