Issues with object maintenance on development system
How would you maintain your BW object development - backend and frontend - on BWD system after they have been transported and imported to BWQ? That is how would you prevent the last recently imported objects from getting changed for no reason at all?
We have a situation where we transported and imported all recently changed development from BWD to BWQ, and the objects now have been changed to something else not matching from what we had transported to BWQ. The changes were not called for per our user's requirement. In order to fix this we would have to check all obejcts from BWQ and then to correct them on BWD back to the way they were last transported.
We are validating the data on BWQ and we would not want to redo the development again to revert back to their orginal state. We would want to ony make correction from what we last transported.
How can this be resolved? Could we put authorizations access to certain objects based on who has developed it on BWD to control the changes on BWD and transports to BWQ? Is this how it would work?
Really... Basis folks take things so personal. They're touchy, sensitive, and always annoying . Surely I wouldn't want to make friends with Basis folks. I'll be polite and cordial but it doesn't mean I like them. Besides they are the ones to support the developers and they must do what I say.
Another approach to this would be to copy client BWQ to BWD.
Those Basis folks better do some work besides complaining and find faults at others.
It's get itchy when they start complaining. They would give me a butt cringe...
Similar Messages
-
I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC
I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC. The issue has been reported in Japanese by Microsoft. The translation is:
Phenomenon
In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. • MS12-024 (KB2653956)
• MS13-098 (KB2893294)
Error message displayed is as follows.
Incorrect password or user name
Back to the top | feedback
Collapse image Cause
This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
Any string will contain the part of the ... Note:. Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
Back to the top | feedback
Collapse image Solution
If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
Back to the top | feedback
Collapse image Workaround
To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
http://support.microsoft.com/kb/947821
By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool. For this reason, the following log is recorded in the CheckSUR.log.
Recreated value: @ _type.
Recreated value: @ dataOnly.
Recreated value: @ default.
Recreated value: @ description.
Recreated value: @ displayName.
Recreated value: @ handler.
Recreated value: @ legacyName.
Recreated value: @ legacyType.
Recreated value: @ migrate.
Recreated value: @ scope.
Recreated value: @ xsd: type.
Back to the top | feedback
Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. It contains information in response to emerging issues are listed. As a result of the speed of information provided may be
typographical errors are included in the article, you might be revised at any time without prior notice. For other considerations, and use conditions
Please refer to.
Back to the top | feedback
Collapse image Property
December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
This document that was written about products for.
• Windows Vista Business
• Windows Vista Business 64-bit edition
• Windows Vista Enterprise
• Windows Vista Enterprise 64-bit edition
• Windows Vista Home Basic
• Windows Vista Home Basic 64-bit edition
• Windows Vista Home Premium
• Windows Vista Home Premium 64-bit edition
• Windows Vista Starter
• Windows Vista Ultimate
• Windows Vista Ultimate 64-bit edition
• Windows Server 2008 Datacenter
• Windows Server 2008 Datacenter without Hyper-V
• Windows Server 2008 Enterprise
• Windows Server 2008 Enterprise without Hyper-V
• Windows Server 2008 for Itanium-Based Systems
• Windows Server 2008 Foundation
• Windows Server 2008 Standard
• Windows Server 2008 Standard without Hyper-V
• Windows Web Server 2008
• Windows HPC Server 2008
• Windows Essential Business Server 2008
We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected. In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
of their customers know about the problem instead of just one country. Hopefully the original bulletin will be updated with this known issue.PPoj,
Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future. -
Is there a compatability issue with Firefox and Andriod operating system 2.2.3? I can't get Firefox to work. I have tried uninstalling it and it won't download. in English
Hi Drbobdog, there shouldn't be a compatibility with Android OS 2.2.3. There may be a compatability with the device itself.
Here are the system requirements:
https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
(also seen here as well : http://www.mozilla.org/en-US/mobile/platforms/ )
I hope this helps. -
Two ABAP Development Clients with Transport enabled in Development System
Hello All,
I have a unique situation in my development systems. We currently have two abap development clients with client settings which allows repository transports to be created. The reason for this setup is because there are two different abap development teams who want to work independently.
Has anyone see two development clients in development system? Do you see any risk with having two abap development clients with transport enbaled? Should I force them to work in ONLY ONE ABAP development client?
I would like to know your thoughts?
Thx...RockyHello,
It may not a good idea to have two development clients. You have to manage with the following issues:
(1) Customizing transports need to be moved to two clients
(2) You may have to peridically sync. them between each other with all the development objects
(3) Data needs to refreshed in two clients for development/unit test purposes
(4) Same object may be edited in two clients independently at the same time which is likely to go to Production at different times resulting in version sequencing issues
(5) Vension of data of object will be lost if you want to retrieve old version.
Thanks,
Venu -
Serious performance issue with LV 7.1 Development Environment
I'm posting this issue to the forums prior to submitting a bug report to ensure that the problems I'm having are reproducible. To reproduce this bug, you're going to have to be an advanced user with a large project (hundreds to thousands of VIs) as the performance problem is related to the number of VIs loaded.
The issue is the increasingly poor performance of the LabVIEW 7.1 Development Environment as the number of VIs in memory increases. The actions affected include switching between front panel and diagram, saving a VI, copy and paste, clicking a menu, and the mysterious time spent (compiling? editing the runtime menu? changing the toolbar state?) between pressing the run button and when the code actually starts executing. Scrolling and, interestingly, copying via a control-drag are not affected. Running time of entirely on-diagram code does not seem to be affected.
These problems are quite severe and significantly decrease my productivity as a programmer. Since they are development environment UI issues, it's been difficult for me to find a good example VI; the best I can do is the attached "LV Speed Test.vi". It doesn't test the issues that affect me most, but it seems to suffer from the same problem.
This simple VI just shows and hides the menu bar 100 times in a tight for loop. When it is the only VI loaded, it executes in about 350 msec on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a single project-encompassing VI (let's call it the "giant") that references a total of about 900 user and VI-lib subVIs, the test routine takes almost a minute and half to run...about 240 times slower! I've tried this on my laptop with similar results.
The problem appears to be related to the *number* of VIs loaded and not the memory utilization. For example, if I close the "giant", and create a new VI ("memhog") that does nothing but initialize a length 20,000,000 array of doubles and stores it in an uninitialized shift register, LabView's overall memory usage (as shown in the task manager) jumps enormously, but LV Speed Test executes in about 450 msec...only slightly slower than with a fresh copy of Labview.
The problem seems to be related to excessive context switching. The Windows task manager shows over a thirteen hundred page faults occur when "LV Speed Test" is run with the "giant" in the background, versus zero or none when run by itself or when "memhog" has used up 160+MB of space.
The problem only seems to affect the frontmost window. (Unfortunately, that's where we LV programmers spend all of our time!) If you start "LV Speed Test" and then put "giant" in the foreground "LV Speed Test" runs much faster. In fact, if you use the VI server to put the "giant" VI in the foreground programmatically at the start of "LV Speed Test", execution time drops back to 450 msec, and there are no page faults!
These results show the issue is not related to video drivers or the Windows virtual memory system. My suspicion is that there is a faulty routine in LV 7.1 that is traversing the entire VI hierarchy every time certain events are thrown in the foreground window. It could be due to a problem with the Windows event tracking system, but this seems less likely.
I have been programming LV for about 7 years and switched from LV 6.1 to 7.1 about four months ago. I know NI engineers have put thousands of hours developing and testing LV 7.1, but honestly I find myself wishing I had never upgraded from using LV 6.1. (To whomever thought "hide trailing zeros" should be the default for floating point controls...what were you thinking?!)
I know each new version of LabView causes old-timers like me to grouse that things were better back in the days when we etched our block diagrams on stone tablets, etc., and honestly I'm not going to go back. I am committed to LabView 7.1. I just wish it were not so slow on my big projects!
Attachments:
LV_Speed_Test.vi 22 KBHi,
I can confirm this behavior. Setting the execution system to "user
interface" helps a bit, but there is still a big difference.
I get a feeling it has something to do with window messages, perhaps
WM_PAINT or something, that is handled differently if a VI is not
frontmost... But what do I know...
Don't know if it should be called a bug, but it sure is something that could
be optimized.
Regards,
Wiebe.
"Rob Calhoun" wrote in message
news:[email protected]...
> I'm posting this issue to the forums prior to submitting a bug report
> to ensure that the problems I'm having are reproducible. To reproduce
> this bug, you're going to have to be an advanced user with a large
> project (hundreds to thousands of VIs) as the performance problem is
> related to the number of VIs loaded.
>
> The issue is the increasingly poor performance of the LabVIEW 7.1
> Development Environment as the number of VIs in memory increases. The
> actions affected include switching between front panel and diagram,
> saving a VI, copy and paste, clicking a menu, and the mysterious time
> spent (compiling? editing the runtime menu? changing the toolbar
> state?) between pressing the run button and when the code actually
> starts executing. Scrolling and, interestingly, copying via a
> control-drag are not affected. Running time of entirely on-diagram
> code does not seem to be affected.
>
> These problems are quite severe and significantly decrease my
> productivity as a programmer. Since they are development environment
> UI issues, it's been difficult for me to find a good example VI; the
> best I can do is the attached "LV Speed Test.vi". It doesn't test the
> issues that affect me most, but it seems to suffer from the same
> problem.
>
> This simple VI just shows and hides the menu bar 100 times in a tight
> for loop. When it is the only VI loaded, it executes in about 350 msec
> on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a
> single project-encompassing VI (let's call it the "giant") that
> references a total of about 900 user and VI-lib subVIs, the test
> routine takes almost a minute and half to run...about 240 times
> slower! I've tried this on my laptop with similar results.
>
> The problem appears to be related to the *number* of VIs loaded and
> not the memory utilization. For example, if I close the "giant", and
> create a new VI ("memhog") that does nothing but initialize a length
> 20,000,000 array of doubles and stores it in an uninitialized shift
> register, LabView's overall memory usage (as shown in the task
> manager) jumps enormously, but LV Speed Test executes in about 450
> msec...only slightly slower than with a fresh copy of Labview.
>
> The problem seems to be related to excessive context switching. The
> Windows task manager shows over a thirteen hundred page faults occur
> when "LV Speed Test" is run with the "giant" in the background, versus
> zero or none when run by itself or when "memhog" has used up 160+MB of
> space.
>
> The problem only seems to affect the frontmost window. (Unfortunately,
> that's where we LV programmers spend all of our time!) If you start
> "LV Speed Test" and then put "giant" in the foreground "LV Speed Test"
> runs much faster. In fact, if you use the VI server to put the "giant"
> VI in the foreground programmatically at the start of "LV Speed Test",
> execution time drops back to 450 msec, and there are no page faults!
>
> These results show the issue is not related to video drivers or the
> Windows virtual memory system. My suspicion is that there is a faulty
> routine in LV 7.1 that is traversing the entire VI hierarchy every
> time certain events are thrown in the foreground window. It could be
> due to a problem with the Windows event tracking system, but this
> seems less likely.
>
> I have been programming LV for about 7 years and switched from LV 6.1
> to 7.1 about four months ago. I know NI engineers have put thousands
> of hours developing and testing LV 7.1, but honestly I find myself
> wishing I had never upgraded from using LV 6.1. (To whomever thought
> "hide trailing zeros" should be the default for floating point
> controls...what were you thinking?!)
>
> I know each new version of LabView causes old-timers like me to grouse
> that things were better back in the days when we etched our block
> diagrams on stone tablets, etc., and honestly I'm not going to go
> back. I am committed to LabView 7.1. I just wish it were not so slow
> on my big projects! -
Issues with privileges in HCP development
Hi Everyone,
Issue with insufficient privilege while using data preview on Attribute & Analytical view.
Executed following command after going through some reviews:
GRANT SELECT, INSERT, UPDATE ON SCHEMA "DEV_XXXXXXXX" TO _SYS_REPO WITH GRANT OPTION;
But the above statement couldn't fetch anything. Please guide with the system privilege issuesHi Vivek,
Couldn't find the _SYS_BIC schema. Tried many options mentioned in SCN. But couldn't fetch anything out the solution in SCN.
Recently I came across following steps:
1. Make sure _SYS_REPO has privilege SELECT WITH
GRANT OPTION for the schemas used. In order to grant _SYS_REPO this privilege
you can execute the following statement:
GRANT SELECT ON SCHEMA <YOUR_SCHEMA> TO _SYS_REPO WITH GRANT OPTION;
2. Make sure the user activating the Object has at
least SELECT privilege over the schemas used within the scenario. SQL
statement to grant this privilege would be:
GRANT SELECT ON SCHEMA <YOUR_SCHEMA> TO <USER_THAT_WILL_ACTIVATE_ANALYTIC_OBJECT>;
3. Make sure all the dependencies of the Analytic
Object to be activated is contained in the Analytic Privilege assigned to the
user that will actually activate the Main Analytic Object.
First option is known to everyone.
I am stuck with the second option. Can I know the user that Activate analytical object. -
Routing issue with ASA and UC540 phone system - at ASA???
Having an issue with routing from the PC at .242 to the CUE server at 10.1.10.1. The CUE server is built into the UC540 phone system. It is an internal piece of software that is used for voicemail and management. The UC540 is not only a call router, it is also an IOS router. It has it's own WAN connection as does the ASA.
Here are some facts:
1. Can ping the UC540's internal CUE server from the PC ( ping to 10.1.10.1 )
2. Can ping the UC540's VLAN 1 address from the PC ( ping to 10.1.10.1 )
3. The ASA is the default gateway for the PC.
4. I have a route inserted at the asa that is:
route 10.1.10.1 255.255.255.0 10.19.250.254 1
5. I have a nat statement that prevents NAT from occuring but I don't think this is necessary as the 10.1.10.0/24 network isn't otherwise defined on the ASA.
6. I cannot pull up a web page when I point the browser on the PC to the 10.1.10.1 address
7. I CAN pull up a web page on the PC when I create a static route on the PC iteslf :
route add 10.1.10.1 mask 255.255.255.0 10.19.250.254
Is is only with this route that I am able to get to the web GUI on the phone system.
8. The phone system has a loopback interface at 10.1.10.2 that serves as the gateway for the internal CUE server, the internal CUE server is at 10.1.10.1
9. The switch is a 2960 and has a trunk port to the phone system to allow for the voice vlan which is at 10.1.1.0/24, no issues with this vlan and phones are connecting to the system fine.
Since I can get the GUI to come up when I set a static route on the PC, then I would assume that the routing in the phone system with it's internal server is fine as it wouldn't work otherwise. Since I can successfully ping the CUE server from the PC, that would lead me to believe that the ASA's routing is setup correctly..... TCP traffic doesn't seem to get to/from the CUE server.
Here are the routing tables:
ASA:
Gateway of last resort is xxx.xxx.xxx.xxx to network 0.0.0.0
C xxx.xxx.xxx.xxx 255.255.255.252 is directly connected, outside
S 172.16.100.100 255.255.255.255 [1/0] via 38.97.193.65, outside
S 10.1.10.0 255.255.255.252 [1/0] via 10.19.250.254, inside
C 10.19.250.0 255.255.254.0 is directly connected, inside
S* 0.0.0.0 0.0.0.0 [1/0] via xx.xx.xx.xx, outside
The UC540 phone system's router side:
Gateway of last resort is xx.xx.xx.xx to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via xx.xx.xx.xx
10.0.0.0/8 is variably subnetted, 7 subnets, 4 masks
C 10.1.1.0/24 is directly connected, BVI100
L 10.1.1.1/32 is directly connected, BVI100
C 10.1.10.0/30 is directly connected, Loopback0
S 10.1.10.1/32 is directly connected, Integrated-Service-Engine0/0
L 10.1.10.2/32 is directly connected, Loopback0
C 10.19.250.0/23 is directly connected, BVI1
L 10.19.250.254/32 is directly connected, BVI1
XX.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C XX.XX.XX.XX/29 is directly connected, FastEthernet0/0
L XX.XX.XX.XX/32 is directly connected, FastEthernet0/0
172.16.0.0/24 is subnetted, 1 subnets
S 172.16.100.0 [1/0] via 10.19.250.1
The UC540's internal CUE server:
Main Routing Table:
DEST GATE MASK IFACE
10.1.10.0 0.0.0.0 255.255.255.252 eth0
0.0.0.0 10.1.10.2 0.0.0.0 eth0
Any help appreciated!!!
Thanks!Hello,
Where you able to solve this problem? It does sound like an issue with TCP state checking on the ASA. The Firewall needs to see both sides of the traffic but the return traffic is going from your UC540 direct to the PC. The firewall essentially kills the traffic.
I would recommend disabling TCP state checking on the ASA and see if it works. Otherwise, you will need to stub route the UC540 as a separate VLAN off the ASA which needs to route through the ASA to reach the PC.
Here is a info page on the TCP State Bypass:
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/111986-asa-tcp-bypass-00.html
Please let me know how it works out. -
Issues with charsets from NUC ERP system to UC BI System
Hi guys
We are actually in the process of Upgrading and Unicode Migration for BI and ERP Landscape
BI Landscape is the first stage so we are facing an issue with char sets
ERP system generates a plain txt file which is later pick up by BI system to run a chain process.
This plain txt file, contains Spanish Special chars which are causing the issues.
I have found a note which converts file at OS level from one code page to another code page
Is there another more transparent solution, like forcing NUC ERP System to generate the plain file in a format which can be read by UC BI System
Best
MartinYou have posted in wrong space. Please post your query on the correct space so thate xperts could help you.
regards
manu -
Crs pre installation issues with "/tmp" and VIP's - system OS level issues
Hi Friends,
could you help me to resolve this issues as i couldnot understand why these errors are gettting , as i created "/tmp" folder with required permissions and
VIP's also configured on the same segment as public interface with default gateway still not sure why these are getting, kindly help me, thanks in advance.
[oracle@pa01uds02 ~]$ cd /crs/oracle/clusterware/cluvfy
[oracle@pa01uds02 cluvfy]$ ./runcluvfy.sh stage -post hwos -n pa01uds01,pa01uds02 -verbose
Performing post-checks for hardware and operating system setup
Checking node reachability...
Check: Node reachability from node "pa01uds02"
Destination Node Reachable?
pa01uds01 yes
pa01uds02 yes
Result: Node reachability check passed from node "pa01uds02".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
pa01uds02 passed
pa01uds01 passed
Result: User equivalence check passed for user "oracle".
ERROR:
Path "/tmp/" does not exist and cannot be created on nodes:
pa01uds02
Verification will proceed with nodes:
pa01uds01
Checking node connectivity...
Interface information for node "pa01uds01"
Interface Name IP Address Subnet
bond0 192.168.220.1 192.168.220.0
eth0 10.19.10.46 10.19.0.0
Check: Node connectivity of subnet "192.168.220.0"
Result: Node connectivity check passed for subnet "192.168.220.0" with node(s) pa01uds01.
Check: Node connectivity of subnet "10.19.0.0"
Result: Node connectivity check passed for subnet "10.19.0.0" with node(s) pa01uds01.
Suitable interfaces for the private interconnect on subnet "192.168.220.0":
pa01uds01 bond0:192.168.220.1
Suitable interfaces for the private interconnect on subnet "10.19.0.0":
pa01uds01 eth0:10.19.10.46
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking shared storage accessibility...
WARNING:
Package cvuqdisk not installed.
pa01uds01
Shared storage check failed on nodes "pa01uds01".
Post-check for hardware and operating system setup was unsuccessful on all the nodes.
[oracle@pa01uds02 cluvfy]$
[oracle@pa01uds02 cluvfy]$ ./runcluvfy.sh stage -pre crsinst -n pa01uds01,pa01uds02
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "pa01uds02".
Checking user equivalence...
User equivalence check passed for user "oracle".
ERROR:
Path "/tmp/" does not exist and cannot be created on nodes:
pa01uds02
Verification will proceed with nodes:
pa01uds01
Checking administrative privileges...
User existence check passed for "oracle".
Group existence check passed for "oinstall".
Membership check for user "oracle" in group "oinstall" [as Primary] passed.
Administrative privileges check passed.
Checking node connectivity...
Node connectivity check passed for subnet "192.168.220.0" with node(s) pa01uds01.
Node connectivity check passed for subnet "10.19.0.0" with node(s) pa01uds01.
Suitable interfaces for the private interconnect on subnet "192.168.220.0":
pa01uds01 bond0:192.168.220.1
Suitable interfaces for the private interconnect on subnet "10.19.0.0":
pa01uds01 eth0:10.19.10.46
ERROR:
Could not find a suitable set of interfaces for VIPs.
Node connectivity check failed.
Checking system requirements for 'crs'...
Total memory check passed.
Free disk space check passed.
Swap space check passed.
System architecture check passed.
Kernel version check passed.
Package existence check passed for "binutils-2.15.92.0.2-13".
Group existence check passed for "dba".
Group existence check passed for "oinstall".
User existence check passed for "nobody".
System requirement passed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes.
[oracle@pa01uds02 cluvfy]$
Thanks
PurnaThank you for your reply, sorry for not mentioning versions, as this is initial setup for Oracle 10gR2, for that iam trying to instal Oracle CRS 10g version, during pre-crs check am getting this issues,
appreciate good reply from CRS guru's.....
Thanks
Purna -
Hi All,
I need a help in solving the type object issue..
I have a package where im calling a function (with parameters id and lang_code).. im initializing the object with id and lang_code and then calling that object(where it does all the calculations and returns back the sting to the package) . Now how can i retrieve the lang_code in the object type..
Here is the ex .
Create or replace package abc(...)
as
function xyz(id number,lang_code varchar2(20) return varchar2
is
CurrentId number;
ReturnString varchar2(32000);
CurrentDocument OBJECT1;
begin
select Id
into CurrentId
from table1
where E_Id = EID and rownum < 2;
CurrentDocument := OBJECT1.init(CurrentId,lang_code);
Here is the Object details
CREATE OR REPLACE TYPE BODY OBJECT1 AS
STATIC FUNCTION init(Id NUMBER,lang_code varchar2) RETURN OBJECT1
MEMBER PROCEDURE GetObjectAttributes IS
CurrentDocument OBJECT1;
Here is need to retrieve the lang_code which i initialized in the package... Please help me how i can get this...
Thanks in advance..
--One can define attributes within object and then initialise the object with whatever values against each attribute:
function xyz(id number,lang_code varchar2) return Object1 is
CurrentId number;
ReturnString varchar2(32000);
CurrentDocument OBJECT1 (xyz.id, xyz.lang_code);
begin
select Id
into CurrentId
from table1
where E_Id = EID and rownum < 2;
CurrentDocument := OBJECT1.init(CurrentId, lang_code);
return CurrentDocument;
end xyz;
Here is the Object details
CREATE OR REPLACE TYPE BODY OBJECT1 AS
(id number
,Lang_Code varchar2(20)
,STATIC FUNCTION init(Id NUMBER,lang_code varchar2) RETURN OBJECT1
/You can define a function so as to return your defined object type, so you'll have the calculations done as well as the Lanugage code and id.
Refer to the following for more info:
http://download.oracle.com/docs/cd/B12037_01/appdev.101/b10807/10_objs.htm -
Issue with Export of 4.6D System
Hi guys,
I am trying to run an export on 4.6D using Oracle 9.2, but unfortunately I get the following message in my INSTGUI..
Would anyone have any ideas on how to solve this issue?
I've read that we need to check if the users have permissions or are locked, but how would one do that, and which users must I look at?
Thanks!
<i>
trnsappr /software/inst_temp > more /oracle/QTG/sapcheck/cdwmbunr.sta
BR0801I BRCONNECT 6.40 (41)
BR0805I Start of BRCONNECT processing: cdwmbunr.sta 2007-10-29 12.12.43
BR0484I BRCONNECT log file: /oracle/QTG/sapcheck/cdwmbunr.sta
BR0280I BRCONNECT time stamp: 2007-10-29 12.12.45
BR0301E SQL error -942 at location db_connect-4
ORA-00942: table or view does not exist
BR0310E Connect to database instance QTG failed
BR0280I BRCONNECT time stamp: 2007-10-29 12.12.45
BR0301W SQL error -942 at location brc_dblog_open-1
ORA-00942: table or view does not exist
BR0324W Insertion of database log header failed
BR0806I End of BRCONNECT processing: cdwmbunr.sta 2007-10-29 12.12.45
BR0280I BRCONNECT time stamp: 2007-10-29 12.12.46
BR0804I BRCONNECT terminated with errors
trnsappr /software/inst_temp > more DBEXPORT.log
INFO 2007-10-29 12:18:30 CommandFileController SyFileCopy:150
Copying source file DBEXPORT.R3S to target file DBEXPORT.R3S.5 ...
INFO 2007-10-29 12:18:30 Main
Preparation successfully completed.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
checking host name lookup for 'trnsappr'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
offical host name for 'trnsappr' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
host 'trnsappr' has ip address '10.96.226.154'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
offical host name for '10.96.226.154' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
checking host name lookup for 'trnsappr'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
offical host name for 'trnsappr' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
host 'trnsappr' has ip address '10.96.226.154'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
offical host name for '10.96.226.154' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
checking host name lookup for 'trnsappr'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
offical host name for 'trnsappr' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
host 'trnsappr' has ip address '10.96.226.154'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
offical host name for '10.96.226.154' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
checking host name lookup for 'trnsappr'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
offical host name for 'trnsappr' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
host 'trnsappr' has ip address '10.96.226.154'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
offical host name for '10.96.226.154' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPSERVER_IND_IND InternalColdKeyCheck:0
The CD CDEXPORT1 will not be copied.
INFO 2007-10-29 12:18:32 DBEXPORTINSTANCE_IND_ORA InternalWarmKeyCheck:0
The installation phase is starting now. Please look in the log
file for further information about current actions.
INFO 2007-10-29 12:18:32
Requesting Export Details
INFO 2007-10-29 12:18:32
Requesting Export Details
INFO 2007-10-29 12:18:32 CHKLIBPATH_IND_ORA InternalWarmKeyCheck:0
No shared library search path needed for database ORA!
INFO 2007-10-29 12:18:32
Checking the Library Path
INFO 2007-10-29 12:18:32
Requesting Export-Specific Parameters
INFO 2007-10-29 12:18:32
Testing the Database Connect
INFO 2007-10-29 12:18:32
Testing the Database Connect
INFO 2007-10-29 12:18:33 DBEXPSERVER_IND_IND InternalWarmKeyCheck:0
The CD CDEXPORT1 will not be copied.
INFO 2007-10-29 12:18:33
Requesting Information on CD-ROMs
INFO 2007-10-29 12:18:33
Creating the Export Directories
INFO 2007-10-29 12:18:33
Updating the Database Statistics for the Export
INFO 2007-10-29 12:18:33
Updating the Database Statistics
INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA SyCoprocessCreateAsUser:300
Creating coprocess /sapmnt/QTG/exe/brconnect -u / -c -f stats -o
SAPR3 -t all -m +I -s P10 -f allsel,collect,method,precision -p 4
as user qtgadm and group sapsys ...
INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA SyGroupIDGet:100
Group id for group sapsys is 101.
INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA SyUserIDGet:300
User id for user qtgadm is 105.
INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA ExecuteDo:0
BR0801I BRCONNECT 6.40 (41)
BR0805I Start of BRCONNECT processing: cdwmbvbd.sta 2007-10-29
12.18.33
BR0484I BRCONNECT log file: /oracle/QTG/sapcheck/cdwmbvbd.sta
BR0280I BRCONNECT time stamp: 2007-10-29 12.18.35
BR0301E SQL error -942 at location db_connect-4
ORA-00942: table or view does not exist
BR0310E Connect to database instance QTG failed
<b>
BR0280I BRCONNECT time stamp: 2007-10-29 12.18.35
BR0301W SQL error -942 at location brc_dblog_open-1
ORA-00942: table or view does not exist
BR0324W Insertion of database log header failed
</b>
BR0806I End of BRCONNECT processing: cdwmbvbd.sta 2007-10-29
12.18.35
BR0280I BRCONNECT time stamp: 2007-10-29 12.18.35
BR0804I BRCONNECT terminated with errors
INFO 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA ExecuteDo:0
RC code form SyCoprocessWait = 3 .
ERROR 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA ExecuteCheck:0
Exit code from /sapmnt/QTG/exe/brconnect: 3.
ERROR 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA InternalInstallationDo:0
Phase failed.
ERROR 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA InstallationDo:0
Phase failed.
ERROR 2007-10-29 12:18:35 InstController Action:0
Step BRCONNECTEXPSTAT_IND_ORA could not be performed.
ERROR 2007-10-29 12:18:35 Main
Installation failed.
ERROR 2007-10-29 12:18:35 Main
Installation aborted.
</i>please post /oracle/QTG/sapcheck/cdwmbvbd.sta
-
Issues with labview on TestStand deployment system (wont run without a labview License)
I am trying to deploy a system using testStand to a deployment machine for the 1st time. I have built my installer and image files etc.The files install successfully on the target machine however when I try and run my program in TestStand operator mode I have getting errors relating to Labview. The only way I can get around these error is to activate a Labview License on the deployment machine, this is not viable.
The error I see when I disable my Labview License simply states an error occurred accessing the Labview ActiveX automation server.
I have included the run time engines etc in my installer. As this is my first build is there something obvious I have missed here??
Thanks for any input.
Vinny
Solved!
Go to Solution.Vinny,
my first guess is that the setting for the LV adapter on the deployment machine is still configured for "LabVIEW Development Environment". You have to change this to "Runtime Engine".
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Weird snapping issues with objects in Ai CS5...
For some reason, when I want to adjust a vectored object (expanded as well), is will only snaop to certain places.
• Smart Guides is not engaged.
• NONE of the perspective grid is activated.
• NONE of the snap-to's are activated.
But for the life of me, things keep snapping to some weird invisible point.
Also, some overlapping objects, when I use the divide pathfinder tool, they divide all wonky.
ANYBODY? I'm dying, here!Was the original from a Web new document profile? If so, turn off Align to Pixel Grid in the Transform panel.
-
Issue with user maintenance in EBP org
Dear experts,
User wants to be assigned to new EBP Org id, presently he is there in other org id.
I heve selected the user and deleted from org id by clicking delete icon. Now I tried to add this user to new org id, through User_gen --> create user from su01 users, but im getting message " Central person" already exists for the user.
I tried to check the user status through users_check, there im getting red indication with message displayed as " Organizational unit 00000000 does not exist" and "user cannot be repaired because the organizatinal unit contains errors"
In EBP organization im not finding that users,
can any one help me on it,
Thanks & Regards,
KrishHi,
Solution in the foll thread;
User cannot be repaired because the organizational unit contains errors
BR,
Disha.
Do reward points for useful answers. -
Are there any issues with changing IP address of an ACS v5.3 system after initial setup?
I am migrating from ACS v4.2.1 to v5.3. I want the final v5.3 system to assume the IP address of the original 4.2 machine so I don't have to change any configs on the network devices.
Are there any issues with changing the v5.3 system IP address AFTER the initial setup?I tried it without a problem. I changed the ip address of the WLC many times.
You have to make sure though that:
1-) You change the switchport accordingly to the appropriate vlan if the new ip belongs to a subnet of a different vlan.
2-) Make sure that all AAA clients configured to use the new IP address of the ACS servers.
Here is the procedure how to change the ip of the interface (as per cisco doc):
http://goo.gl/0BYqVT
I changed also by normal ip address command and it works. but of course the server must be standalone before doing that step (i.e. no secondary ACSs registered to it and it is not registered to other ACSs in a distributoin).
HTH
Amjad
Maybe you are looking for
-
Trying to understand user load
Hello all running Exchange 2013 sp1 CU8. CAS role are running on dedicated separate box from mailbox role. To get a general understanding of user load on my CAS servers i am running perf mon using the below counter. Is this a good counter to use th
-
Streaming .mov files through shockwave with Quicktime 7
I'm running a site (www.soundjunction.org) that streams quicktime audio and video files embedded in a shockwave player. This worked fine with QT 6.5.2 but with the upgrades to QT7.0.x, it now sticks on the 'buffering' stage forever and never loads in
-
Can a person pay to advertise his book on these breakout novel lists, or are the books chosen at random or according to sales?
-
Hi All, We r using oracle 9i pplication server and for reporting we r using .pdf format using internet explorer. First thing is reports take a long time to appear infact the whole application itself is very slow. Second sometimes report comes and som
-
When reviewing photos in Bridge by pressing the spacebar how do I get higher resolution photos
In Bridge when I enlarge a photo by pressing the spacebar I have got to go to 100% to get a sharper picture, is there anything I can do to get a better resolution photo without having to go to 100% Regards