HT4059 Can a person pay to get his book on one of these breakout lists, or are the books chosen randomly or according to sales?

Can a person pay to advertise his book on these breakout novel lists, or are the books chosen at random or according to sales?

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

  • I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not curre

    I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not currently authorized for use with your Adobe ID." It does it with every single book. I've never had this problem before. I've tried everything! Please help.

    same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

  • I have been working on a book and have 418 photos already in my book.  All of a sudden I cannot access the book format to see the multiple view, spread view, or single view.  I can no longer see my book although I still see the collection with 418 photos

    I have been working on a book and have 418 photos already in my book.  All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on.  I can no longer see my book although I still see the collection with 418 photos under collections.  What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos.  It is like the new empty template is somehow covering it up.  How do I get back to the book I have been working on?

    Is it possible you mistakenly clicked on a [Clear Layout] button?
    But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
    Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
    Note: a Book Collection shows an icon that looks like a book.
    Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
    Re-opening a book without using the "Saved Book" option can have unpredictable results.
    A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc,  is automatically updated in the Saved Book collection.

  • I bought a book on itunes on my pc. I want the book on my ipad.  When I plugged in my ipad to sync it moved all my apps to my pc - useless. how do i get my apps back on my ipad and get the book from my computer to my ipad?

    I bought a book on itunes on my pc. I want the book on my ipad.  When I plugged in my ipad to sync it moved all my apps to my pc - useless. how do i get my apps back on my ipad and get the book from my computer to my ipad?

    Instructions on syncing your iPad can be found here:
    http://support.apple.com/kb/PH12311
    and in the accompanying documents linked from that page. Syncing your iPad with iTunes copies items, it doesn't move them. The only way apps would be actually removed from your iPad during syncing is if you had iTunes set to remove them on syncing, so check the appropriate settings in iTunes, set the book to sync as well, and then sync the iPad again.
    Regards.

  • Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration?

    Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration? Do we have any Instructions/steps?

    Migration from WCS 7.0 to PI 1.2 can be  performed. If the customer wants to migrate data you need to first upgrade to  NCS 1.1.1  You can download NCS 1.1.1 from Cisco.com if you have a valid service  contract.
    For the migration step involving NCS an evaluation license is  sufficient.  You can obtain an NCS evaluation license from http://www.cisco.com/go/license >  Get Demo > Network Mgmt Products > Cisco Prime NCS Evaluation License.  
    Instructions for migrating data from WCS 7.0 to NCS 1.1.1 are available in  NCS 1.1.1 Release Notes.  Do not upgrade to NCS 1.1.2 as this release is not  upgradeable to Prime Infrastructure 1.2.  If you are ordering a Cisco Prime  physical appliance (PRIME-NCS-APL-K9) be sure to select the NCS 1.1 image which  you can later upgrade to Prime Infrastructure 1.2 after you have migrated your  WCS data.
    There is a post in the support forum which can be refered.
    https://supportforums.cisco.com/docs/DOC-26972

  • "It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!

    "It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!

    Mine does the same thing occasionally, is your phone jailbroken? Sometimes it will work if you delete the book and reinstall it or put your phone into airplane mode then turn it back off.

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

    Hi All,
    I am new to TestStand. Still in the process of learning it.
    What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
    Thanks in advance,
    LaVIEWan
    Solved!
    Go to Solution.

    Hi,
    Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
    Regards
    Ray Farmer

  • Can you sort ibookshelf books by collections and list all of the books in each collection?

    can you sort ibookshelf books by collections and list all of the books in each collection?

    The collection changes a little by the criteria you use to view the books, and you can view them by Title, Author, and Category. So, yes, you can.
    The default view is Book view. On the upper right part of the page, you'll see four white blocks - that's the icon for book view. The icon on the right has three white lines; that's where you find Title, Author, and Category view. You can't create folders in any view.

  • I can see just by reading some of these comments that you are the Network Guy

    I can see just by reading some of these comments that you are the Network Guy's that know what your talking about.
    I am 60+ years old and very new to Spiceworks.com and also very new to networking and devices on my small home network I have about 20 devices that share the network and I have managed over time to see what is on my network.
    Now I just have to find a way to find out which device is hogging the bandwidth I will be back lol
    Nice to meet you all hope to have a chat with some of you guys and gals sometime.
    This topic first appeared in the Spiceworks Community

    IP Address Device Name MAC Address Network Adapter Company Device Information User Text First Detected On Detection Count Active 192.168.1.67 Upstairs-PC.home 8C-89-A5-E6-44-81 Micro-Star INT'L CO., LTD Your Computer Upstairs-PC.home 28/04/2015 17:14:04 12 Yes 192.168.1.66 Windows-Phone.home 2C-5A-05-11-A0-AC Nokia Corporation My-Windows-Phone.home 21/07/2015 10:47:19 7 Yes 192.168.1.70 bravia66d7222210c64b7b.home 00-A0-96-61-60-93 MITSUMI ELECTRIC CO., LTD. bravia66d7222210c64b7b.home 21/07/2015 10:47:17 5 Yes 192.168.1.78 Front-Room-TV-LG.home CC-2D-8C-1C-79-AC LG ELECTRONICS INC Unknown-cc-2d-8c-1c-79-ac.home 28/04/2015 17:31:09 7 Yes 192.168.1.71 Emma-PC.home 64-27-37-20-81-23 Hon Hai Precision Ind. Co.,Ltd. Emma-PC.home 29/04/2015 07:52:22 5 Yes 192.168.1.84 Upstairs-PC-BT-Dual-Band-EWFi.home 94-FB-B2-BB-2F-76 Shenzhen Gongjin...

  • I can not open documents I get a message that says To view or change permissions, select the item in the Finder and choose File Get Info.  help

    I have a mac with os X.  I have saved documents and photos on my computer and am now not able to open them.  I get a message that tells To view or change permissions, select the item in the Finder and choose File > Get Info.  I do that and it is not locked.  confused.  help

    In the Info window it's this:
    Do you have read and write privileges?

  • How can I turn my French apple account into Australian one to be able to buy a Iphoto book I've made?

    hi
    How can I turn my french apple account into an Australian one , to be able to buy a Iphoto book I 've created ?

    And you need to set the "Print Products Store" in the iPhoto Preferences "Advanced" to the country you are in. The credit card you will be using with your AppleID needs to be valid in the country your AppleID is registered to. Will you be staying permanently in Australia? Maybe it wuld be simpler to create a second AppleID just for the time of your stay there.

  • When trying to log into my mailbox I can not do so I get an error message saying "something went wrong try later" is the fault at your end?

    I am running Firefox instead of "I E" thinking it was less prone to freezing.
    I have "Bing" as my browser. I try to log into my outlook inbox as I normally do but I get a message on screen saying SOMETHING went wrong please try later, What & by whom?
    It was working earlier now after waiting then trying several times I still cant.
    When I have downloaded "Firefox" it also installs maintenance how do I do such a task when I can not find out where I should do so.
    I went to my Yahoo account to see my newsletter from you, there I am able to install the latest "Firefox"
    thinking that by doing so I could enter my outlook mail BUT NO

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Why can't I pay for items on candy crush game? All my payment details are correct!

    I can't seem to be able to buy any items from the game candy crush even though my payment details are correct the game just tells me to contact iTunes! Does anyone know how I can correct this or who i need to contact?

    " just tells me to contact iTunes!"
    Then do exaclty that.  Contact itunes support.
    Click Support at the top of this page, then clickt he link under Contact Apple Support

  • I purchased a book on my iPad and it did not download it shows up in purchased and downloading but does not complete. How can I get my book my device is up to date and supports the book.

    I purchased a book today on my iPad it won't download it shows up in purchased and I have checked all my systems are up to date. 

    Close all open apps by double-tapping the home button, then swiping upward on the app window (not the smaller icon) off the screen.
    Then reset: hold down the home button along with the power button until you see the Apple, then let go.

Maybe you are looking for

  • Workbook error 310 - save not possible

    Hi, when I want to save a workbook I receive error message 310 - saving not possible. Nothing in my authorizations where changed. In sdn I found also no hint. Any idea?

  • How do I determine what needs attention on my Apple RAID card?

    Every time I turn on the computer, I get a message that says," The Apple RAID Card installed in your system requires your attention." This is what I have: RAID 065-7214 Mac Pro RAID Card Why do I keep getting this message? I am not sure what needs to

  • Wacom Cintiq 13hd works on Mavericks?

    Wacom Cintiq 13hd works on Mavericks?

  • SATSA Card Emulator App communication

    Greetings, I know that probably this questions has been asked a million of times, but i just cant get it done and i've searched through google. I have my midlet with with piece of code: private final String slot0ApduAid = "apdu:0;target=f7.22.20.94.5

  • Norton Anti-Virus Poping This Message

    Hello all. On and off these few days, when I start up my mac while a few apps start up, like Mail and iTunes (when I plug in my iPod), I will get this Norton Anti-virus Pop-up Message: Norton AntiVirus Repair Alert The compressed archive 17096.emlx i