Issues with Seeburger AS2 alerts

Hello All,
I am trying to setup an alert rule for any failures in the AS2 adapters.
I have created an alert rule in the RWB, with the adapter type as AS2.I have created the alert category as well.
When the AS2 message is unable to reach the destination system, the communication channel errors out with the description about the connection issue. But for some reasons, the alert rule is not called. I could see in the "SXMSALERT_LOGREADER" report that No active rule for this Adapter Framework exception. I have selected a * for all the filter criteria in the alert rule except for the adapter type (which is filtered as AS2).
Are my basis guys missing any alert enablement functionality while deploying the AS2?
Pls note that I am able to receive email alerts if the adapter type is selected as File or JMS instead of AS2.
Pls help me.
Edited by: Senthilnathan Natarajan on Oct 4, 2011 5:53 PM

I'm resending this since I did not have any luck with it the first time.
We also have an oss note waiting to be responded on this subject.
When I send messages using Seebuger FTP adapter, I see the following information in the SAP message monitor -
"Message entered module processor exit bean and will be transferred to JCA adapter".
But does not get to IBM VAN mailbox. How do I trace from this point onwards.
Should I use Seeburger monitoring tool for this? If so, I don't see anything in Seeburger monitoring (used all criteria).
Please let me know if you have any information on this subject.
Thanks,
Parimala

Similar Messages

Client Auth and SSL with Seeburger AS2 adapter

Hello All,
We are using the Seeburger AS2 adapter in our landscape and I am in the process of setting the same up and have made quite some progress in all my issues.
and I hope that you will be able to help me out.
1. Server SSL on Receiver AS2 adapter
I am sending a message from XI using the Receiver AS2 adapter to my AS2 test tool using Server SSL.
This is working perfectly fine. In my AS2 adapter I have selected HTTPS as the protocol and the message goes via SSL to the target test tool, is processed and the MDN comes back to XI perfectly.
The issue here is :
Irrespective of what is provided in the Server Certificate ( Keystore) , the message goes to my target test tool. I even left this field blank with no certificate entry and still the SSL connection was established and the message went to the target system.
Is there no validation that XI does here? I am lost what is the use of this entry Server Certificate if XI blindly accepts all SSL connections.
I am using a Decentral Adapter Engine with LoadBalancer.
2. Client Auth on Receiver AS2 Adapter
I tried to perform Client Authentication by proving my Server's private key in the AS2 adapter. The corresponding public key is loaded in my partner's Keystore.
XI error's with the error "SSL handshake failed - Bad Certificate" .
I am not sure why XI is erroring out here and I have a feeling that I have misunderstood the use of the fields in the AS2 adapter,
Server Certificate ( Keystore) and Private Key for Client Authentication.
Has anyone tried this? If further details are needed, I will be able to furnish the same.
Regards,
Bhavesh

Hello Jens,
Thanks for your reply.
1. The Encryption and Signature part of the Interface is working absolutely fine and I use the same concept highlighted by you - The Sender always signs the message with his private key and encrypts with message with the partner's public key in the corresponding agreement.
2. Server SSL is also working perfectly fine, i.e, when XI initiates the connection the SSL connection is established to the partner.
3. Mutual Auth was the issue where I was getting the bad certificate issue.
To investigate further I moved the same setup to my Central Adapter Engine and all the issues I had described above seem to have vanished and things work exactly as I was expecting, ie.
The field : Server Certificate (Keystore) is used to provide the Target System's Server SSL's public Certificate.
The field : Private Key for Client Authentication is used where XI provides its own Server SSL's private key for Mutual / Client Authentication.
The problem seems to be with my Decentral Adapter engine and not my central adapter engine and so I guess,
1. I either have the incorrect certificates on my Decentral Adapter Engine.
2. I also have 2 instances of a Decentral Adapter Engine with a Webdispatcher and so maybe the 2 Visual Admin's of the 2 Decentral AE are inconsistent.
3. Maybe it was just a long day and I did something wrong
Will investigate further for the root cause but I am glad that my concepts remain intact and things do work as I expected them to work.
A blog on all this is on the cards sometime soon.
Cheers,
Bhavesh

Content based receiver determination with Seeburger AS2 adapter

We are planning to use the Seeburger AS2 adapter on our XI 3.0 installation to post custom XML documents to XI from external business partners. The problem we have is to do the receiver and interface determination based on the xml message type that is submitted. How can we identify what is the name of the root xml node (which is representing the message type that was submitted to us) during the receiver determination and specify conditions for the receiver determination based on this? We can not use the Seeburger Classifier module here as this is only determining the mapping name to be used for an EDI conversion but can not handle any type of XML message.

Rudy,
I think the easiest way would still be the ReceiverDetermination and creating an XSD that contains the main important TAGs from the different messages.
That should allow you to test for the existing of certain important TAGs or check the value of some TAGS.
I don´t know about aedaptive-adapters, but I don´t think that they are Drummond-Certified. Check out...
http://www.drummondgroup.com/html-v2/as2-companies.html
Without this certification, a lot of your partners might not allow you to use this adapter if you wanna make AS2 with them.
Greetings
Stefan

Issues with Seeburger FTP adapter

Can one of you with Seeburger FTP adapter experience share some information on these issues I'm facing
1. Do I need to setup resource management in Seeburger workbench. If so, do I need to configure, resource, server and reservations. Do you have more information and what parameters I need here.
2. In the Seebuger FTP adapter, I have
Module Key - exit
Parameter Name - JNDIName
Paramter Valu - deployedAdapters/SeeXIFTP/shareable/SeeXIFTP
JNDIName, should I be replacing this with some other name. I'm trying to get Seeburger FTP to work and in the messaging monitor, I see the message as passed to Module Processor but it does go anywhere from there.
Can one you throw some light on this subject...what to expect from this definition.
Thank you for all your replies,
Parimala

I'm resending this since I did not have any luck with it the first time.
We also have an oss note waiting to be responded on this subject.
When I send messages using Seebuger FTP adapter, I see the following information in the SAP message monitor -
"Message entered module processor exit bean and will be transferred to JCA adapter".
But does not get to IBM VAN mailbox. How do I trace from this point onwards.
Should I use Seeburger monitoring tool for this? If so, I don't see anything in Seeburger monitoring (used all criteria).
Please let me know if you have any information on this subject.
Thanks,
Parimala

Archiving Message PI with Seeburger AS2

Hello Experts,
we have an AS2 Scenario with incoming Invoic. Now my question: It is possible to archive our incomming messages after the as2 adapter has decrypt the message an before the message is processed in the pi. Where can i configure the archive step?
here is what i found in SDN:
The new B2B Add-On for SAP NetWeaver Process Integration:
Archiving of B2B messages: Adapter module extending basic archiving functionality which is built into the AS2, X.400 and OFTP adapter. In and outgoing messages can be stored on the file system with more information (e.g. IDoc number in filename, archiving per business partner, etc.).
Kind regards
Tobias

@Venkat - "AS2 adapter doesn't support the archive functionality by default."
I disagree. There is a FileStore module provided by Seeburger which provide extensive Archiving capabilities. If you have the license, there is an Archiving guide available with it which explains the process.
A simpler and effective way is of course to use createFiles option with BIC module if you have that license.
Regards,
Prateek Raj Srivastava

Anyone else having issues with messages and alerts being delayed on their iPhone 5?

Numerous times now, I have received message alerts from various apps but mostly iMessage on my iPad long before they ever show up on my iPhone 5. Then when I open iMessage on my iPhone, the messages start arriving, even though I have already had them on my iPad for sometime. Often, I will get a notification on my iPhone five that I have received a message. But then, when I open iMessage, there is no message at first, but after a while it will finally come through.

I've had no problems with Facebook on my iPhone 5 but here are a couple of suggestions.
1. Quit Facebook like I describe then reset the iPhone. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
2. If the first thing doesn't help, quit Facebook again, delete Facebook, and reset the iPad. After the iPad restarts use the App Store app to download Facebook again.

SCOM 2012 issue with disk space alert generation

we have installed SCOM 2012 newly , after that we have imported Windows Operating system MP's. However customization(Override) of alerts, everything is working fine except not receiving low
disk space alerts.
Is there any particular reason why we are not receiving low disk space alerts?

Hi,
Did you reach the threashold both for free % and free Mb? Both needs to be reached before you will get an alert.
For more information, please review the link below:
Logical Disk Free Space Monitor
http://blogs.technet.com/b/jonathanalmquist/archive/2009/04/04/logical-disk-free-space-monitor.aspx?CommentPosted=true
Operations Manager 2012: Monitoring Logical Disk Free Space
http://tmitegypt.wordpress.com/2012/10/22/operations-manager-2012-monitoring-logical-disk-free-space/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Issues with conflicting AS2 scripts

So I am building my first Flash website (Yay!). There are two effects that I enjoy having as part of the experience. One is a text based mouse trial. the other is vibrating dot that also randomly populates the screen based on predefined. The only similarity between the two scripts is the use of "MovieClip" or a variation of it. In the end, I cannot use both at the same time. Can anyone suggest a solution? I would greatly appreciate it!
Mouse Trail Code:
Text = "Blah Blah Blah";
letters = Text.split("");
//Format1
fontformat = new TextFormat();
fontformat.font = "Verdana";
fontformat.align = "center";
fontformat.size = "10";
fontformat.color = "0xFFFFFF";
fontformat.bold=true;
//format2
fontformat1 = new TextFormat();
fontformat1.font = "Verdana";
fontformat1.align = "center";
fontformat1.size = "10";
fontformat1.color = "0xFFFFFF";
fontformat1.bold=true;
spacing = 6;
speed = 3;
for (var LTR = 0; LTR<letters.length; LTR++) {
    mc = _root.createEmptyMovieClip("l"+LTR, LTR);
    mc.createTextField("t"+letters[LTR], LTR, LTR*spacing, 10, 20, 20);
    with (mc["t"+letters[LTR]]) {
        trace(LTR);
        text = letters[LTR];
        //for first 7 characters
        if(LTR<7)
        setTextFormat(fontformat);
        //for after 7 characters
        else
            setTextFormat(fontformat1);
        selectable = false;
    if (LTR) {
        mc.prevClip = _root["l"+(LTR-1)];
        mc.onEnterFrame = function() {
            this._x = this._x+(this.prevClip._x-this._x+5)/speed;
            this._y = this._y+(this.prevClip._y-this._y)/speed;
    } else {
        mc.onEnterFrame = function() {
            this._x = this._x+(_root._xmouse-this._x+10)/speed;
            this._y = this._y+(_root._ymouse-this._y)/speed;
Vibrating Dots Code:
onClipEvent (load) {
    //movie width/height
    height = 200;
    width = 300;
    //makes everything random //
    this._x = Math.round(Math.random()*width);
    this._y = Math.round(Math.random()*height);
    var temp = this._alpha=Math.random()*100;
    this._xscale = this._yscale=temp;
    //setting initiaion position
    cx = this._x;
    cy = this._y;
onClipEvent (enterFrame) {
    //causes the object to be offset
    this._x = cx+(1+Math.random()*5);
    this._y = cy+(1+Math.random()*5);
Duplication and population:
for (var i = 0; i<25; i++) {
    circle.duplicateMovieClip(i, i);

i don't see any conflict though that duplicateMovieClip() isn't correct: you should never start an object/variable name with a number.
in addition, it's not clear where that duplicateMovieClip() code is place and it's not clear what circle has to do with the code that's attached to some movieclip.

Has anyone had issues with not hearing the text alerts on the iPhone 5?

hello i have been having issues with my iphone 5 not hearing the text alert tones.it will go from time to time & only hear the vibrating sound, The wired part is all other alerts work fine , just text.
Has anyone having this same issue ? Also i noticed sometimes when i text, i'll see some crazy blury lines go across my screen like as i text it will move across any help?

I have had that issue with no text alert sound and also with calls, no ring for the call but then I got a missed call or voicemail alert. Never had the blurry lines though. Right after I upgraded, the ring changed to a very short version of what I have selected and only rang once, other times not at all. This was a very big problem since I am working from my car most of the day and get a lot of calls and texts. I did a reset with home button and button on the top as described in a post somewhere here on the forum and the problems stopped. So far so good. Give reset a try!

Seeburger AS2 - message does not arrive when "Athentication required" is ON

Hi guys!
If somebody of you is using the Seeburger Adapter:
I have an inbound scenario and everything works fine. But when I set "Authentication Required" flag to be ON, messages are refused. This is strange, because incoming messages are signed.
Any ideas, what could be wrong? There are several settings for certificates and maybe I have some wrong setting.. Does anybody have experience with this?
Thank you, Peter

Sai, you probably don't have experience with Seeburger AS2, do you? It works in a special way - that's why I'm asking people, who have experience with this..
But for clarification: My inbound Seeburger AS2 channel receives message scorrectly, but when I enable uthentication on it, AS2 messages are refused - so they are not in the AE, they are not in the IE.
Peter
p.s. I will not reward your answer, sorry
Message was edited by:
Peter Jarunek

Seeburger AS2 Sender : EOIO

Hi All,
Is it possible to achieve EOIO with Seeburger AS2 sender channel? I am not seeing any parameter for configuring the same (though it has EOIO mode for split mapping).
The idea is to send all the messages received for a particular interface to be routed to a EOIO queue. Is this possible with AS2 sender channel?
Regards
Suraj

Hi Prateek,
>>SAP_AS2Adapter_en.pdf - Page 6 (in my version).
I have checked seeburger manuals and found page six to be something different (may be different version document). From the document I found a particular section
The following Qualities of Services are supported:
u2022 Outbound (AS2 sends a message to an external partner)
Best Effort
Exactly Once
Exactly Once in Order
u2022 Inbound (AS2 adapter receives a message from external partner)
Exactly Once
This was in Section 2.5 under Overview. May be if you tell me the section I would try to read through it,
I have tried your suggestion
namespace: http://seeburger.com/xi/AS2
parameter name "QoS" value "EOIO" and
for name "QueueName" value "<your actual queue name>"
but it didn't help. If I use with "write", there was no entry in MONI, and if I use it with "insert" the entries were created but it didn't go to the EOIO queue (as the SAP:QualityOfService is still ExactlyOnce in SoapHeader->ReliableMessaging)
<SAP:Record namespace="http://seeburger.com/xi/AS2" name="QoS">EOIO</SAP:Record>
<SAP:Record namespace="http://seeburger.com/xi/AS2" name="QueueName">INT014</SAP:Record>
Anyway thanks for your inputs
Regards
Suraj

Has anyone had issues with iPhone 5 on wifi, mines keeps dropping the wifi signal.

Has anyone else experience this issue?

I have had that issue with no text alert sound and also with calls, no ring for the call but then I got a missed call or voicemail alert. Never had the blurry lines though. Right after I upgraded, the ring changed to a very short version of what I have selected and only rang once, other times not at all. This was a very big problem since I am working from my car most of the day and get a lot of calls and texts. I did a reset with home button and button on the top as described in a post somewhere here on the forum and the problems stopped. So far so good. Give reset a try!

I am having a issue with getting data useage alerts for my iphone 4s

I am having a issue with getting data useage alerts for my iphone 4s from AT&T. I do not download anything huge at all.
I looked into it and figured out that the phone dials out nightly at 12:29am every night. I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this. I then clicked don't send...but I am still getting useage alerts. Can anyone help me please...
Thanks

Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
Little to nothing in that thread indicates an issue beyond inept consumers. Yes, I read several pages on the incessant gripes. Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement. Whining will get nothing accomplished.

There is no key entry with such alias in keystore seeburger AS2

Hi,
Error message in RWB shows the following
Message entered module processor exit bean and will be transferred to JCA adapter
2011-04-06 06:19:29 Success SEEBURGER/AS2: Received order from system.
2011-04-06 06:19:29 Error Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystore, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiExc
2011-04-06 06:19:29 Error Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystore, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.
2011-04-06 06:19:29 Error The message status set to NDLV.
2011-04-06 06:19:29 Error MP: Exception caught with cause javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystore, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ks
unable to send / receiver messages through AS2. Please let us know what could be the error. How/ where to resolve it.

Please check the SDN thread below
AS2 Adapter Configuration to Customer / no signature certificate
Also, check the help page below
http://help.sap.com/saphelp_sm40/helpdata/DE/84/be18d66b2a47f6b4adc704a7c0e23e/content.htm
for instructions on how to get the "SEEBURGER EDIINT AS2 Adapter for SAP Exchange Infrastructure Configuration Guide" from the Service Marketplace. Then, on this guide, please check the configuration according to your sender or receiver communication channel regarding the Security (certificates) parameters.
Are the key Store entries imported correctly? Please check if the certificates were imported in the right order and none of the certificates on the chain are expired.

Issue with IDOC occurence and SeeBurger message mapping

Hey Guys
While developing a EDI 850 to IDOC scenario i came across this issue with pre-delivered Seeburger mapping(A_850_V4010_to_I_ORDERS05).
I actually need to post multiple IDOC's to SAP system in the same message so i changed the IDOC occurence to unbounded and re-imported that as a .XSD file in Integration repository.
Earlier the pre-delivered message mappings provided by SeeBurger(under SEEBURGER_HIGH-TECH, 1.7.1 of seeburger) was working fine for me since i was posting only 1 IDOC but now the mapping is failing as the IDOC occurence has changed(unbounded).
Is there a way we can do some settings on SeeBurger server or Bic so that we can use the pre-delivered mapping for Multiple IDOC's as well?
I just want to make sure before i start off with doing whole of the mapping manually.
Thanx
Aamir

Thanx for the input guys
@Deepthi.
Doing whole of mapping manualy is definitely the last option but i m looking for ways to re-use the pre-delivered SeeBurger mapping.
>>Seeburger Mapping is only just to convert XML to EDI and EDI to XML.
Bic mapping designer does this,i m dealing with message mapping of XI(convert source to target) not Bic designer right now,and Bic does more than just XML to EDI and vice versa,it handles other industry standards too.
@Jens
>>The XI message mappings from Seeburger in the Industry solutions are mapping templates
Yeah,but the mapping template i have deals with 850 to ORDERS05,when i change IDOC occurence and re-import it back in Integration repository,it doesn't stays as ORDERS05,it has to be changed to user defined message interface(in my case MI_ORDERS05) so i m unable to use 850 to ORDERS05 template.
@Seshagiri
>>Open the Seeburger SWCV From the IR--goto External Def---Select the right one and copy it and paste it in notepad.
Changing the occurence is not an issue,i want to re-use the pre-delivered mapping in Integration repository,which is not working.
Looks like i need to do it manually
Thanx
Aamir

Issues with Seeburger AS2 alerts

Similar Messages

Maybe you are looking for