Issues with setting appropriate ownership for file system

Hi All,
We are using ACFS File system. For some of the mount point we have set to change ownership according to requirement in rc.local file So that all permissions remain intact when the server restarts. But the permissions are not taking into account. Only after the rc.local is executed ASM disks are mounted I guess. Is there any where else can we write scripts to change ownership of mount points for ACFS so that when the disks are mounted proper Unix permissions are setup.
Thanks & Regards,
Vikas Krishna

To configure raw devices if you are using Red Hat Enterprise Linux 4.0:
To confirm that raw devices are enabled, enter the following command:
# chkconfig --list
Scan the output for raw devices. If you do not find raw devices, then use the following command to enable the raw device service:
# chkconfig --level 345 rawdevices on
After you confirm that the raw devices service is running, you should change the default ownership of raw devices. When you restart a Red Hat Enterprise Linux 4.0 system, ownership and permissions on raw devices revert by default to the root user. If you are using raw devices with this operating system for your Oracle Clusterware files, then you need to override this default.
To ensure correct ownership of these devices when the operating system is restarted, create a new file in the /etc/udev/permissions.d directory, called oracle.permissions, and enter the raw device permissions information. Using the example device names discussed in step 5 of the previous section, the following is an example of the contents of /etc/udev/permissions.d/oracle.permissions:
# OCR
raw/raw[12]:root:oinstall:0640
# Voting Disks
raw/raw[3-5]:oracle:oinstall:0640
# ASM
raw/raw[67]:oracle:dba:0660
After creating the oracle.permissions file, the permissions on the raw devices are set automatically the next time the system is restarted. To set permissions to take effect immediately, without restarting the system, use the chown and chmod commands:
chown root:oinstall /dev/raw/raw[12]
chmod 640 /dev/raw/raw[12]
chown oracle:oinstall /dev/raw/raw[3-5]
chmod 640 /dev/raw/raw[3-5]
chown oracle:dba /dev/raw/raw[67]
chmod 660 /dev/raw/raw[67]
http://download.oracle.com/docs/cd/B19306_01/rac.102/b28759/preparing.htm#CHDGEEDC
Edited by: Babu Baskar on Apr 18, 2010 1:33 PM

Similar Messages

URM Adapter for File System issue.

Hi, I am just starting out on using the URM Adapter for File System and I have a few questions about issues I am facing.
1. When I try to create multiple searches and map them to Folders/Retention Categories in URM, it does not work. I am able to map one search via one URM source to one Folder/Retention Category (without my custom attribute from question 1). However in Adapter’s Search Preview I am able to perform a search on the documents successfully. Would different searches require different URM sources in Adapter?
2. Does the adapter work with other Custom Attributes? I have added an attribute in addition and in the same way as "URMCrawlTimeGMT" is added in Oracle Secure Enterprise Search (I created a custom Document Service and Pipeline to add a metadata value) and in the URM Adapter’s config.properties file and when I create a search in Adapter based on the custom attribute, it does not map the documents into URM. I am however able to search the documents in Adapter’s Search Preview window with the custom attribute displaying correctly.
Any help with this topic would be really appreciated. Thank you.
Regards,
Amar

Hi Srinath,
Thanks for the response, as to your questions,
1. I am not sure how to enable Records Manager in adapter mode. But I am able to login to the Records Manager web page after starting it up through StartManagedWebLogic.cmd URM_server1.
2. The contents of the file system should be searchable in Records Manager, and should be able to apply retention policies to the documents in the file system, I do not need to have SES, but apparently the adapter needs to have SES as a pre requisite.
Upon further investigation I found that in the AGENT_DATA table the values being inserted were "User ID"(UA_KEY) and NULL(UA_VALUE), so I just made the UA_VALUE column nullable and I was able to pass that step. Is this the wrong approach to fix the issue.
Could you please let me know about enabling Records Manager in adapter mode, I am not able to find documentation online, I have been through the Adapter installation and administration guides. Thank you once again.
Regards,
Amar

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

I got the following for Adobe Reader that there was an issue with it. C:\Program Files (x86)\Adobe\Reader 11.0\Reader\NPSWF32.dll file How do I fix this? Thanks.

How can I fix this problem. I got the following for Adobe Reader that there was an issue with it. C:\Program Files (x86)\Adobe\Reader 11.0\Reader\NPSWF32.dll file

Try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then reinstall.

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

Is possible control tape library slot 1 - 10 for file system backup

hi ..
i am new to osb , i just install and setup osb , i have a question as below , hope expert can help me
env: testing
rhel 5.5
tape library with 20 slot
file system backup
1. is possible osb only use slot 1 - 10 for file system backup ? amanda can control slot x - slot y for the configuration .
2. how do i label the tape for slot 1 - slot 10 by obtool ? how to control osb auto load the tape for next backup ? where to check the log say that next tape is tape-02 ?
thanks ..

hi dcooksey
how do i use list for a tape drive...for example, if you want tape drive A to only use slots 1-10 from obtool or webtool ?
becoz i new to backup solution & osb ( i always use ghost or acronis to clone the image ) , my thinking as below , pls correct me if i am wrong
slot 1 - 10 for daily backup
slot 11-16 for full system backup
slot 17 - 20 reserve ( this tape only use for full system backup before perform any application upgrade patches , )
daily backup mon - fri ( 2 week ) ( no backup on saturday and sunday ) , server application offline
full system backup friday ( 1 , 14 on calendar ) every 2 week perform full system backup after daily backup completed
for upgrade application ,
perform full system backup after daily backup , then release the server to application team to perform upgrading .
so how to set my media family for the above setting ? the slot configuration is control by media family ?
hope you can help ...

Issue with setting ratings and labels

Greetings all. I am having an issue with setting ratings AND labels on image files at the same time. If the script sets the label first then the rating, the label doesn't show in Bridge. If the script sets the rating first then the label, the rating doesn't show in Bridge.
Is there a workaround for this? Here is my script function for doing this. file=filename minus extension. Rating is a number for the desired rating. lab is a number for the level of Label I wish to set. Everything works great except that I can't set both Rating and Label with the script as shown. In this instance, only the Ratings will show up in Bridge after running the script. If I move the x.label=Label line under the x.rating=Rating line, then the ratings only show for those images with no label (lab=0). Any image that gets a label receives no rating.
If you're going to test this, you may want to comment out the Collections part. That's the part within the "switch(Number(Rating))" block.
function setRating(file,Rating,lab) {
    try{
        cr=File(file+"CR2");
        psd=File(file+"psd");
        jpg=File(file+"jpg");
        tif=File(file+"tif");
        switch(lab) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.created) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.created) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.created) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
                else addFile=psd;
            else addFile=cr;
        switch(Number(Rating)){
            case 0 : break; /* No Rating */
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

Afew errors to start with, you were not creating a proper file as there wasn't a fullstop in the filename.
If a CR2 file didn't exist no other file was looked for, you were using "created" and should have been "exists"
This now labels and rates....
setRating("/C/Test Area/NEF/z",2,1);
function setRating(file,Rating,lab) {
    try{
        cr=File(file+".CR2");
        psd=File(file+".psd");
        jpg=File(file+".jpg");
        tif=File(file+".tif");
        switch(Number(lab)) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.exists) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.exists) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.exists) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
        switch(Number(Rating)){
            case 0 : break;
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

Issue with Setting Application Item

Hi All,
I have an issue with setting the value of application item G_USER_ID as part of the login process.
I use customized authentication for login. I have created an application item G_USER_ID, and in my CUSTOM_AUTH procedure, I am setting its value as APEX_UTIL.SET_SESSION_STATE('G_USER_ID', l_user_id);
For some reason, the value is not set to G_USER_ID the first time I login. When I log out and login again without closing the browser, the value is set. Note that I even tested with a static value instead of l_user_id like APEX_UTIL.SET_SESSION_STATE('G_USER_ID', '5555555'); but still fails to set during the first login.
I hope someone can guide me as to what I am doing wrong here.
Thanks!
JMcG

What does this do?
:SVR_FLAG := NVL(l_mult_svr,'N');
Scott

[svn:fx-trunk] 12982: Fix for issue with exposing accessible names for combobox list items

Revision: 12982
Revision: 12982
Author:   [email protected]
Date:     2009-12-15 20:44:23 -0800 (Tue, 15 Dec 2009)
Log Message:
Fix for issue with exposing accessible names for combobox list items
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ComboBoxAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListBaseAccImpl.as

Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
margin-bottom: -2px;
Your nav p will then look like this:
nav p {
          font-size: 90%;
          font-weight: bold;
          color: #FFC;
          background-color: #090;
          text-align: right;
          padding-top: 5px;
          padding-right: 20px;
          padding-bottom: 5px;
          border-bottom-width: 2px;
          border-bottom-style: solid;
          border-bottom-color: #060;
          background-image: url(images/background.png);
          background-repeat: repeat-x;
          margin-bottom: -2px;

Setting archive attribute for files

Hi,
I've written a program to make backups from files. I'd like to set archive attributes for files so the program knows which files have changed since the last backup.
Is there any way to do that?

nope,
unless you write your own dll with VB or C++ and call this through native methods.
Try to find a workaround.

RC 8.6 Issues with Nikon D810 NEF RAW files

RC 8.6 does not correctly process Nikon D810 NEF RAW files. See the following blog article for some details:
Nikon D810 vs D800E ISO Comparison

This is very helpful. My current workflow, until ACR 8.6 and LR fully support the Nikon D810, are to use the DNG converter and import the resulting D810 DNG files into my LR catalog.
I have not yet tried this (traveling right now), but I assume I can still make a custom profile using the X-Rite ColorChecker Passport and it's associated software for my D810 using the RC 8.6 DNG files. This is my normal workflow for all of my other cameras in LR, but the process is direct from native RAW and not DNG (to produce the custom profile).
Sent from my iPad
On Jul 28, 2014, at 6:51 PM, "max.wendt" <[email protected]> wrote:
RC 8.6 Issues with Nikon D810 NEF RAW files
created by max.wendt in Adobe Camera Raw - View the full discussion
Until Lightroom gets D810 support, you will need to use the ACR plugin in order to see the profiles. The DNG Converter always uses Adobe Standard, and embeds it into the DNG. Lightroom 5.5 doesn't have the D810 profiles.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image athttps://forums.adobe.com/message/6592335#6592335
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: [https://forums.adobe.com/message/6592335#6592335]
To unsubscribe from this thread, please visit the message page at [https://forums.adobe.com/message/6592335#6592335]. In the Actions box on the right, click theStop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go tohttp://forums.adobe.com/thread/416458?tstart=0.

Control/set a limit for file attachment

Hello,
I would like to know if there is a way to control/set a limit for file attachment in Workbench ES. e.g. Assign Task > Attachments & Notes.
Can you please advise.
Thanks,
Han Dao

No. You would have to customize Workspace to do that.
Jasmin

Issue with Audit Vault Collector for Peoplesoft-MS Sql Server

Experts,
Requesting your valuable inputs regarding below issue :
Environment:
- Peoplesoft with SQL Server 2008
- Oracle Audit Vault.
Current issue with Audit Vault collector for SQL server is that it is not giving PSFT login ID instead it is giving Peoplesoft DB service Account ID.
Is this expected ?. If yes, what is the workaround ? Can Database Firewall is a best option to capture PSFT login ID ?
Thanks

Hi Rabi ,
just do one think here ..
During data source creation , in the Additional tab area , in the SQL Engine session , select "Vendor SQL" instead of "Open SQL".
HOw could u create data source without selecting the driver corrsponding to MS SQL.?
it is recommended to download the latest Driver and use this for Driver creation.
let me know ..
Regards
Kishor Gopinathan

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
Sreenivas

Hi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator)

Issues with setting appropriate ownership for file system

Similar Messages

Maybe you are looking for