Issues with WSDL file loading in BPEL process Composite

hi',
I am facing lot of issues in 11G
I am using:-->"Jdeveloper Studio Edition Version 11.1.1.2.0"
When I am trying to open a already working composite from a different machine in my machine, it start giving error
it is unable to build "Unable to load WSDL file", I have all the webservices in different machine OSB and my machine
is targeting that machine OSB with IP address, In my BPEL process I am using localhost, I am able to see all the methods
in composite and dosent shows any error, but when I try to compile it it gives unable to load WSDL file.
please advice,
thanks
Yatan

I suppose, any unhandled exception in the one-way BPEL process could have caused rollback of the instance and hence the instance might not be seen. Add fault handlers-catch/catch-all blocks in the one-way BPEL process if not done already, and test.

Similar Messages

Issue with Deploying and calling a BPEL process on ALBPM enterprise server

Hi,
I am trying to put in place a POC using Aqualogic BEA products (using ALBPM 5.7, Enterprise Server 5.7, ALSB 2.6, Weblogic App server 9.2). My goal is to put in place a simple BPEL process (using ALBPM) which would call a webservice exposed through ALSB. This BPEL process is initiated by a wrapper BPMN process calling the BPEL process through fuego code.
Though we are able to do the above on a standalone ALBPM studio, When we try to deploy the exported BPM project on the enterprise server and access it through the hiper workspace portal we are getting the following error in the BPM Process Administrator Log of the Engine.
A component failed while executing activity '/Process#Default-1.0/Global' (BP-method Global). Details: The task could not be successfully executed. Reason: 'fuego.connector.ConnectorException: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. '. Caused by: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. fuego.lang.ComponentExecutionException: The task could not be successfully executed. Reason: 'fuego.connector.ConnectorException: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. '. at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:916) at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1068) at fuego.server.execution.TaskExecution.invoke(TaskExecution.java:389) at fuego.server.execution.GlobalTaskExecution.invoke(GlobalTaskExecution.java:106) at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:481) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:655) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:616) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:442) at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:164) at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:142) at fuego.server.execution.Global.execute(Global.java:81) at fuego.server.AbstractProcessBean$38.execute(AbstractProcessBean.java:2496) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:290) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:462) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:540) at fuego.transaction.TransactionAction.start(TransactionAction.java:213) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:117) at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66) at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2491) at fuego.ejbengine.EJBProcessControlAdapter.runGlobalActivity(EJBProcessControlAdapter.java:386) at fuego.ejbengine.EJBProcessControlAdapter_hu750h_EOImpl.runGlobalActivity(EJBProcessControlAdapter_hu750h_EOImpl.java:2877) at fuego.ejbengine.EJBProcessControlAdapter_hu750h_EOImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174) at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335) at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252) at fuego.ejbengine.EJBProcessControlAdapter_hu750h_EOImpl_921_WLStub.runGlobalActivity(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:48) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:111) at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:66) at $Proxy77.runGlobalActivity(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1478) at fuego.lang.JavaObject.invoke(JavaObject.java:185) at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:200) at fuego.portal.wapi.InteractiveExecution.process(InteractiveExecution.java:157) at fuego.portal.wapi.WebInteractiveExecution.process(WebInteractiveExecution.java:54) at fuego.portal.wapi.InteractiveExecution.process(InteractiveExecution.java:200) at fuego.portal.servlet.ExecutionDispatcher.runGlobalActivity(ExecutionDispatcher.java:659) at fuego.portal.servlet.ExecutionDispatcher.processRequest(ExecutionDispatcher.java:144) at fuego.portal.servlet.ExecutionDispatcher.doPost(ExecutionDispatcher.java:105) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at fuego.portal.servlet.AuthenticatedWamServlet.service(AuthenticatedWamServlet.java:1049) at fuego.portal.servlet.SingleThreadPerSession.service(SingleThreadPerSession.java:73) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at fuego.servlet.multipart.BaseMultipartFilter.doFilter(BaseMultipartFilter.java:57) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3243) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2003) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1909) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:181) Caused by: fuego.connector.ConnectorException: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. at fuego.connector.ConnectorException.connectorNotFound(ConnectorException.java:55) at fuego.connector.ConnectorService.getConnectorInterface(ConnectorService.java:586) at fuego.connector.ConnectorTransaction.getConnectorInterface(ConnectorTransaction.java:618) at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:254) at fuego.soaptype.WSConfiguration.getInstance(WSConfiguration.java:55) at fuego.soaptype.Endpoint.create(Endpoint.java:42) at fuego.soaptype.WebServiceInstantiator.instantiate(WebServiceInstantiator.java:58) at fuego.component.Component.instantiateDynamic(Component.java:123) at CapGemini.Process.Default_1_0.Instance.CIL_callBPEL(Instance.java:241) at CapGemini.Process.Default_1_0.Instance.CIL_callBPEL(Instance.java:307) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:907) ... 64 more
Two things here that might help to understand the problem better :
1) As I understand the error is due to some issue while calling the BPEL process from the Fuego code.
The Fuego code which call's the BPEL from the BPMN process is as follows :
helloResponse as String = "someoutput"
helloRequest as String = "someinput"
sessionid as String
// Starting a Session.
// In case you are testing this in the Studio,
// the password must be the same as the user
startSession BPELWSDL.ProcessServiceListenerWSDL.ProcessService
using user = "test",
password = "test"
returning sessionid = result
// createTest is the name of the operation
// in the exposed process.
// In this case the process "ExposedProcess"
// has a web service operation
// called "createTest" that is a "Process Creation" type
// and uses the Begin activity's argument set
callHello BPELWSDL.ProcessServiceListenerWSDL.ProcessService
using sessionId = sessionid,
arg1 = helloRequest
returning helloResponse = result
// Closing the session
discardSession BPELWSDL.ProcessServiceListenerWSDL.ProcessService
using sessionId = sessionid
display "The BPEL's response : " + helloResponse
2) Further, I had catalogued the BPEL's wsdl to the location http://localhost:9000/fuegoServices/ws/ProcessServiceListener?WSDL while running the same in Studio, but while deploying on the enterprise server , I made this point to http://localhost:7001/fuegoServices/ws/ProcessServiceListener?WSDL Is this correct ?
Any thought on this issue would be appreciated.
Regards
Deepak

Hi Deepak,
We are also facing a similar problem, while accessing an external webservice from a BPM process.
Were you able to resolve this issue.
If so, Could you please let us know the procedure that you followed to resolve the issue.
Thanks in Advance,
Krishnaveni.

Issues with one way invocation in BPEL Process

We have a synchronous BPEL Process that invokes that calls a one-way BPEL Process.It was working fine. But now we are encountering a intermittent issue in Production
We could see that the synchronous BPEL Process is invoking the One way BPEL Process and getting completed. But we could see no instance is created for the one way BPEl Process.
Its a critical issue we are encountering . Your help is highly appreciated.

I suppose, any unhandled exception in the one-way BPEL process could have caused rollback of the instance and hence the instance might not be seen. Add fault handlers-catch/catch-all blocks in the one-way BPEL process if not done already, and test.

Issue with flat file loading timing out

Hello
I have a scenario, where I am loading a flat file with 65k records into a cube. The problem is, in the loading process, I have to look up the 0Material table which has a million records.
I do have an internal table in the program, where I select a subset of the Material table ie around 20k to 30k records. But my extraction process takes more than 1 1/2 hrs and is failing (timed out).
How can i address this issue? I tried building indexes on the Material table and its not helping.
Thanks,
Srinivas.

Unfortunately, this is BW 3.5, so there is no END routine option here. And I tried both .csv and notepad file methods, and both are creating problems for us.
This is the total code, do you guyz see any potential issues:
Start Routine (main code)
refresh i_oldmats.
refresh ZI_MATL.
data: wa_datapak type transfer_structure.
loop at datapak into wa_datapak. (** I collect all the old material numbers from my flat file into an internal table i_oldmats**)
   i_oldmats-/BIC/ZZOLDMATL = wa_datapak-/BIC/ZZOLDMATL.
   collect i_oldmats.
endloop.
sort i_oldmats.
SELECT /BIC/ZZOLDMATL MATERIAL (** ZI_MATL only has recs. where old materials exist, this gets about 300k records out of 1M**)
         FROM /BI0/PMATERIAL
         INTO ZI_MATL FOR ALL
         ENTRIES in i_oldmats WHERE
          /BIC/ZZOLDMATL = i_oldmats-/BIC/ZZOLDMATL .
            collect    ZI_MATL.
Endselect.
Sort ZI_MATL.
Transfer rule routine (main code)
IF TRAN_STRUCTURE-MATERIAL = 'NA'.
    READ TABLE ZI_MATL INTO ZW_MATL
    WITH KEY /BIC/ZZOLDMATL = TRAN_STRUCTURE-/BIC/ZZOLDMATL
    BINARY SEARCH.
    IF SY-SUBRC = 0.
      RESULT = ZW_MATL-MATERIAL.
    ENDIF.
ELSE.
    RESULT = TRAN_STRUCTURE-MATERIAL.
ENDIF.
Regards,
Srinivas.

Issue with flat file load

Hello,
I am trying to load data via flat file. we have entries in a field which starts with 0s are skipped when we load in CSV format.
like i have an entry 00657, is being loaded as 657 .
How can i prevent this?
Thanks.
Praveen

Hi Praveen,
It is of lenghth 5. but when i upload CSV file it is not considering 00 infront. But i want those. I am loading hierarchy from flatfile.
Suggest me, if we can also load from text ?.
Thanks.
Praveen

How to get the read input file name in bpel process using File Adapter.

Hi,
I am reading a .txt file from configured directory using File Adapter.
I had configured file adapter to read file with naming pattern “SalesOrder.*\.txt”.
Now I had requirement to access the actual file name in bpel process eg: “SalesOrder123.txt”
How can I get the file name in bpel process.
Any help is appreciated.
Vidya.

1) create a variable of message type. Click on Browse Message type. Here you select Message Type-->Project WSDL Files -->fileAdapterInboundHeader-->Message Types-->Inboundheader_msg. Then click OK
2)Next dbl Click on teh receive Activity which is receing your File from teh File Adapter. Go to the Adapter Tab. Click on Browse variable and select the variable that you had just created above.
This would get the File name in the variable declared

Issue with Sender File FCC

Hi Experts,
I have an issue with Sender File FCC Adapter. The file being picked is of type TXT and it is tab seperated. The first line contains the field names and from next line onwards we have values for those fields.
The field names and field values are tab seperated. Even inserting a single letter in some field value manually disrupts the whole setup & alignment of the TXT file and the Sender File CC is unable to pick up the file from the shared folder. If the first file is errorenous and after that a correct TXT file is posted, it fails to pick up the correct file as it is trying to pick the errorenous file first.
The Error thrown is :
"Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'ABCD':java.lang.Exception: ERROR in configuration / structure 'ABCD.': More elements in file csv structure than field names specified!"
I have two questions:
1. Is there a way to handle such a scenario? For e.g., the errornous TXT file gets picked but throws error in PI.
2. Is there an alternative that the sender FCC channel picks up the correct files and filter out the errorneous ones ? ?
Thanks,
Arkesh

Hi Arkesh,
I think you are passing more number of fields than expected. Please check paramters defined and send the data accordingly.
In the processing parameters tab of sender file adapter, you have an option called Archive faulty source files, below to that you would have option to enter the " Directory for Archiving files with Errors".
I hope this helps you....
Thanks,

Issues with RAW files from my 7D

I have Aperture 1.5.6 on my computer and the software updater says that is the current version. I shoot with a 20D and a 7D. I upload my raw files to Aperture and edit them from there and then process for a jpeg. However, every time I upload a raw file from my 7D I get the following message when I click on it to edit it: Unsupported Image format.
Any words of advice, other than just buy Aperture 3??

I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

A serious issue with excel file read in ODI

hi gurus,
Issue with excel file read is that we can read only one file by setting the path from ODBC Data Source Administrator-->System DNS -->Select Work book
what i want to read the dynamic path(Every time I cant go back and set the Work book to select the excel file..
So i came up with a solution to write a Vbscript that convert the excel to csv my problem got solved for dynamic paths the script is as follow:
Set objArgs = WScript.Arguments
For I = 0 to objArgs.Count - 1
FullName = objArgs(I)
FileName = Left(objArgs(I), InstrRev(objArgs(I), ".") )
Set objExcel = CreateObject("Excel.application")
set objExcelBook = objExcel.Workbooks.Open(FullName)
objExcel.application.visible=false
objExcel.application.displayalerts=false
objExcelBook.SaveAs FileName & "csv",23
objExcel.Application.Quit
objExcel.Quit
Set objExcel = Nothing
set objExcelBook = Nothing
Next
Now this script convert the xls file to csv with comma seprated values
e.g in excel sheet if data is ABC XYZ PQR
csv will come with ABC,XYZ,PQR
here the delimiter is , i want the delimiter as pipe | who's ascii code is 124
but if i change 23 with 124 its not working i getting the error cannot save as...
can anyone tell me that what should be the correct code for pipe
so that the output is ABC|XYZ|PQR
AS WE CAN USE THE SCRIPTS IN TOOLS
Edited by: 789141 on Sep 14, 2010 11:33 PM

I dont have the answer for your question but i have different approach in handling multiple Excel File.
Step 1. Copy a sample source Excel File and Call it Final.xls .
Step 2. Map this Final.xls to DSN and in Topology call this Final.xls
Step 3. Do the Reversing and Map and test the Interface . Once its done.
Step 4. Create a Package and using a http://odiexperts.com/?p=1426 get the list of all the Excel File
Step 5 . Using this http://odiexperts.com/?p=273 create a Loop to Read the Excel File name
Step 6 . Copy using OdiFileCopy to Final.xls and run your interface .
Step 7. Increment the Loop and copy your next File for Final and run the interface
Step 8 . Finally you will be able to read all the Excel File .
Step 9 . Delete the source file [ Optional ]
Hope this helps.

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

Issue with attachment file name

Hi All,
This is about an issue with attachment file name:
we have a scenario wherein we have payload with attachments ...(attachments can be any doc ,pdf) , problem is main document is comming with messageid.sap.com and thats normal but attachments are comming with file names for example something.pdf or something.doc or something.txt ...this is failing in adapter as it expects same name as u have in main document...anybody have any idea to get through this issue...
Regards
kiran

we have a scenario wherein we have payload with attachments ...(attachments can be any doc ,pdf) , problem is main document is comming with messageid.sap.com and thats normal but attachments are comming with file names for example something.pdf or something.doc or something.txt ...this is failing in adapter as it expects same name as u have in main document...anybody have any idea to get through this issue...
- <SAP:Payload xlink:href="cid:payload-4CED452F17C601BDE10080000A492050---sap.com">
<SAP:Name>1 .Header1.txt</SAP:Name>
Error we are getting is
Cannot cast 'Header' to boolean] in class com.sap.aii.mappingtool.flib7.NodeFunctions method createIf[Header, com.sap.aii.mappingtool.tf7.rt.Context---27a73bfa]
So we have to change the File name Header1.txt to something which we can cast to creatif....(we cannot tell the sendr to change the file name as its is set already)
Thanks for interste and assisting
Regards
Kiran

Issue with corrupted file when dragging to timeline

Has anyone ever had an issue with a files audio becoming corrupted when moving the file from the editing window to the timeline. I am also seeing the my camtasia mp4 becomes blurry on the timeline but plays fine in the editing screen.
I had not problem with camtasia Mp4s previously and today I have had so many issues with premier pro

Hi,
Even i faced this issue before...the problem with file adapter is the attribute nxsd:quotedBy takes " as default even if u dont mention it takes the same and now after the quotes it immediately expects | wch is not there in the data and it throws the error...now the fix for the problem is put some symbol for nxsd:quotedBy wch u never expect in the data some thing like less than or greater than symbol ....some thing like below
<element name="FieldTwo" type="string" nxsd:style="terminated"
nxsd:terminatedBy="|" nxsd:quotedBy="<"/>

Sharpening issues with RAW files

Hi,
I have downloaded lightroom 5 as a one month trial and have been playing with the program. I am not an experienced user and are wondering if I am doing something wrong, have wrong settings applied or if it is the known sharpening bug that messes with my photos. I know that sharpening and noise reduction includes a bug that does not let you export pictures 1/3 of original size with sharpening/noise intact. However, in my case, this also happens with RAW files. I do not crop or change size/resolution to any of the photos, but the sharpening is still not working. Photos look great in develop mode, but when I click on library mode to export them, all sharpening disappears!
Is this the same bug previously reportered "only for pictures 1/3 of original size", or do I have some strange settings applied?
I was loving lightroom 5 up until I noticed this, and now I am reluctant to buy the product...
I'd be greatful if anyone has any input on this!
Thanks in advance

I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

Generating the wsdl with inline schema for the bpel process

Hi
When a BPEL process is deployed, we can get the WSDL of the same by logging into the BPEL console, but the WSDL contains the reference to the schema using the namespace. Can we generate the wsdl with the inline schema.
Suggestions are highly appreciated.
Thanks

Hi,
If the wsdl is referring to a Schema file you won't be able to see the schema definition in the WSDL file itself,for that you have to refer to the deployed jar which contains the XML schema.The default path for the deployed jar is <Oracle_SOA_Installed_Home>/bpel/domains/<domain_name>/tmp/<bpelprocess.jar>
Otherwise if you have the source project you can always refer to it in JDev.
Rgrds.

Issues with WSDL file loading in BPEL process Composite

Similar Messages

Maybe you are looking for