ISync 'Reset Device' resetting speed dial?

Hello, I am using an aftermarket plug-in to iSync with my SE w580i, as it is not officially supported by iSync, HOWEVER, I had this issue with my SE z520 which WAS supported officially by iSync, so I suspect that the plug-in is not at fault...
I have several numbers set up to speed dial, so I can press '1' (or any other numbers) and call, instead of having to enter the full phone number. I noticed with my old phone, and now with my new phone, that if I 'Reset Devices' (thinking that only my calendars and contacts will be reset), my speed dial gets reset and I have to reprogram it. In a way, I understand, as after the reset, the phone sees all new contacts, BUT if they have the same name, why is it a problem?

The "Reset Device..." command in iSync does exactly that - so any settings you've applied in the phone to specific Contacts (such as speed dials, custom ringtones, caller ID pictures) will also get wiped.
If you think about it, you assign a speed dial to a contact. Resetting the device wipes that contact, so the speed dial setting has no contact to be assigned to.
iSync is unable to retain (or even see/access) any of the custom settings you apply to contacts in the phone, so every time to reset the device you'll have to re-apply any custom settings.
This could also apply to changes to data within a contact, because Sony Ericsson phones don't allow a Contact to be modified over Bluetooth, so iSync has to delete the contact and re-send the edited one, thereby removing any custom settings applied to that contact in the phone.

Similar Messages

After resetting devices in Netflix, Apple TV is not finding my Netflix account

Apple TV was reporting that it couldn't connetct to Netflix and to try again later. My MacBook and Wii were fine. After several days of this, I reset my Apple TV settings and reset my devices in my Netflix account. All devices are back up, including my iPhone, except my Apple TV. Because I reset devices in Netflix I had to reenter my login and password to Netflix. This worked on other devices. Apple TV said it couldn't find my account. I reset my password in Netflix and tried again. Again, all other devices are still working, but Apple TV cannot find my account. I'm confident that I'm entering the right login and password because I did it successfully on every other device.
Ideas?

I'm having the same issue. I live on a farm and the only internet fast enough is from my phone. I've connect the hotspot, but I get that same error when I try and play something. What does work, however, is if I pull up the netflix app on my phone (a different phone from the one I am using as a hotspot), play it from there, and airplay it on the apple TV. It's a big pain and it effectively slows my connection because I'm streaming it through the hotspot onto my phone and then pushing that back through the network onto the Apple TV. Any way to play it directly from Apple TV??

Is it possible to reset device passwords in Windows Intune

Hello,
is it possible to have a device password for Windows Phone 8 device reset using Windows Intune in case a user forgets the password.
Thank you
Sascha

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Exception Error With Device Reset (0XAC)

Hi,
I'm using 2 PXI-4472 cards (MXI-4, Ni-Daq 7.0.0f8, Labview 7.0).
Before configuring those cards, I reset them by running the Device Reset.vi (Ni Daq).
It works well, but sometimes, an exception error occured and I don't know why.
The problem is always when calling the Device Reset.vi (dialog box exception 0XAC).
Please find attached the capture of the dialog box.
Anyone know this problem or ideas ????????
Thanks
Eddy DUCHENE
12 F Chemin de Boutary
69300 CALUIRE ET CUIRE
[email protected]
Attachments:
Erreur.bmp ‏166 KB

Hello Educhene,
To answer your request, I need to have more information :
1 - OS?
2 - Do you have the same behavior using MAX (Measurement and Automation eXplorer)?
3 - You use the function "Device Reset.vi" in complete LV application or just alone?
4 - Have you tried to install the last version of NI-DAQ 7.3?
You can download it for free on the link below :
http://digital.ni.com/softlib.nsf/websearch/BEC182021CEB566C86256EEE00696562?opendocument&node=132060_US
If yes, have you the same behavior using DAQmx?
Waiting for your answer.
Sanaa TAZI
National Instruments France
Sanaa T.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

PXI-6509 Error occurred at Reset Device

Greetings Everyone,
     I recently had three (3) PXI-6509's fail in one of my Test Stations. I tried to reset them in MAX and received the following message: "The device reset has failed. The error report from the device driver is as follows: Error -224903 occurred at Reset Device.". I also received "Error -50152". After that while I had the stores list up of all installed boards, the three (3) PXI-6509's removed themselves from the list.  I'm wondering what these error codes are telling me.  The pop up error dialogue box stated that the "Possible Reason(s): Internal Software Error occurred in Static_Digital_software". I'm also curious as to what this is relating to. I replaced all three (3) board from a NEW chassis that I'm bringing up for use and everything thing is fine. I tried plugging these failed boards into my other chassis and the computer will not even boot up. Thank you in advance for any information that you provide that will help me in understanding what may have caused this to happen. The system was working fine up to lunch time and after lunch is when the problems started.
Regards,
Scott
Solved!
Go to Solution.

Greetings Nick,
Here is the course of events that led up to the problem being described.
While testing UUT’s (Company Product): (PXI-1044 with PXI-8101(XP), GPIB Controller and various PXI cards installed)
Before Lunch everything was working well. It was after lunch that the following events took place.
a)     Test Sequence hung up during External Power Supply ramp up in which the D-I/O are used to switch relays inside the ITA (Interface Test Adaptor) to connect the DMM to the Power Supply that is in use at the particular time in the test sequence. This has happened a couple times before, but NO error ever happened and just re-booting the system cleared it.
b)     The next thing that was performed was shutting down TestStand and Labview.
c)     The next thing that was performed was executing “MAX”.
d)    Once in “MAX”, I normally try to RESET all of the PXI cards, which is usually successful, but not in this case. The error pop up came up with the two (2) different error codes (-224903 and -50152). Please explain what the “Static-Digital Software is?
e)     I shutdown “MAX” and Re-Booted the system.
f)      After Re-Boot completed, I executed “MAX” once again and clicked My System, Devices and Interfaces and PXI-1044 “Chassis 1”.
g)     I tried to reset the NI PXI-6509 “PXI1Slot7” and received the pop-up error as described.
h)    Upon clicking OK. The PXI1Slot7 and PXI1Slot8 removed themselves from the stores list of cards installed and the icon next to NI PXI-6509 “PXI1Slot9” changed from a little green board icon to a white board icon with a little red ‘x’ inside it.
i)      Next, I removed all three (3) PXI-6509 from a NEW chassis in a NEW TestStand that I planned to bring on line in a couple of weeks. I placed these boards into the TestStand that is failing and everything is working well once again. I ran some diagnostics and everything checks out OK.
j)      Next, I took the failing boards and placed them into the NEW chassis and the computer wouldn’t even boot up.
k)    Next I removed two (2) (PXI1Slot7 and PXI1Slot8) of the boards and tried to boot the computer and the computer booted up.
l)      I proceeded to execute “MAX” and check the stores list only to find that the board (PXI1Slot9) was not even in the category of the PXI-1044 Chassis1 but outside it and it also had the white icon with a little red ‘x’. It also affected the PXI-2575 in PXI1Slot10, which had a white icon and little red ‘x’. I removed the board from PXI1Slot9 and re-booted the system and PXI1Slot10 recovered with the normal green icon that is usually next to it.
What I need to understand is what “Static-Digital software” is and what the errors are telling me. The fact that three (3) NEW board installed into the chassis and function 100% tells me that there is something wrong with the three (3) boards that I removed from the chassis and that nothing else seems to be wrong with the chassis.
The fact that installing the three (3) boards into a NEW chassis and the computer not booting is something of concern. I’m trying to understand what could have caused this to happen in the first place so I can be prevented in the future.
Regards,
Scott

Adding a new subscriber in CUCM 9.1.2 cluster cause all device reset

I am on CUCM version 9.1.2 ,whenever i add the subscriber /upgrade the subscriber to Cluster ,all the registered devices drops .
Not sure why ,In Cisco Documentation ,it never stated this bug in 9.1.2 service release notes.
However , In 9.1.1 mentioned about this in important notes.
CSCub12922: Adding a new subscriber causes device reset
After you install a new node in an existing cluster, all phones that are registered to the cluster are reset.
Anyone experienced ? or aware about this bug?
Is this the case going forward in any version after 8.X? for subscriber addition to cluster will reset the devices?
Thanks
Manoj

Hi Manoj,
As per the following bug
https://tools.cisco.com/bugsearch/bug/CSCub12922/?reffering_site=dumpcr
Symptom:
Add new subscriber to existing 8.x CUCM cluster cause all device reset
Conditions:
Adding a new subscriber to existing 8.x CUCM cluster cause all device reset due to database update. Issue recreated in lab when "Prepare Cluster for Rollback to pre 8.0" set to both true & false. The symptom and logs are the same in each scenario
This is not a bug. The condition is applicable only to CUCM 8.6 and higher releases. Whenever a node is added to CUCM cluster , from CUCM 8.6 onwards , the phones belonging to that Call Manager group will be automatically restarted
Workaround:
None
So, this applies to all 8.6+ releases of cucm.
HTH
Manish

IPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

Delay after reset device?

I want to reset my device, including both modules and chassis if the device is a cDAQ chassis, and then proceed to setting the device up for aquisition. I find that if I do not include delays after the DAQmx Reset Device.vi, I get errors when I go on to setting up the channels and tasks. As shown in the attached vi, the delays work, but I think this is not a robust method. Is there a way to know, after a DAQmx Reset Device, when the device is again available for further interaction?
Thanks.
Attachments:
Reset Devices (SubVI).vi ‏22 KB

Hi Alejandro,
Here is my version of your suggestion. I used serial number rather than device type. Note that I want to reset all the devices in a chassis, plus the chassis itself, if the device is a chassis so I build an array with the module names followed by the Chassis name and then do the rest and wait for serial number operation on the array, one at a time.
When I use this immediately before a vi that does some moderately extensive DAQmx channel and task setup, the setup vi still fails. It gives the following message
Error -201003 occurred at DAQmx Create Channel (CI-Position-Angular Encoder).vi:4
Possible reason(s):
Device cannot be accessed. Possible causes:
Device is no longer present in the system.
Device is not powered.
Device is powered, but was temporarily without power.
Device is damaged.
Ensure the device is properly connected and powered. Turn the computer off and on again. If you suspect that the device is damaged, contact National Instruments at ni.com/support.
Device Specified: cDAQ2Mod1
Task Name: _unnamedTask<D7>
I am including snippets for both the Reset vi and the Is Device Chassis? vi. The is Device Chassis vi is one I worked out a long time ago by empirical experimentation. If you know of a better way to do that check I'd be glad to learn that too.
Attachments:
Reset Devices 2.png ‏71 KB
Is Device Chassis.png ‏37 KB

State of 4472b after reset device

Hello,
I'd like to know which is the state or parameters configuration of the 4472b device after being reseted. For example, if I reset the device programatically and then perform a measurement indicating, let's say the samplig rate and length, but nothing about the ICP. Which state would the ICP for the measurement?
Greetings
crimolvic

Hey crimolvic,
The state of ICP should be "off" after a device reset, and you should be in DC mode.
(for any channel you configure and use)
Good luck,
-gaving

WinUSB notification of device reset

Hi,
I'm using MFC and WinUSB to develop an application to communicate with a USB device using a custom device class. I need the desktop application to be able to respond to device resets caused by a watchdog timer. During normal operation the application continuously
polls the device using WinUsb_ReadPipe(), when this returns false following a device reset, I disconnect the device, wait and then re-connect. The current process is working fine for re-connecting to the device, but about 40% of the time WinUSB_ReadPipe()
is reading spurious data before returning false and triggering re-connection to the device.
Is there a way for the USB hub to notify the application that it has detected a device reset that would enable me to immediately disconnect the device and avoid calling WinUsb_ReadPipe() after the device reset?
Thanks,
Mark

typically a device reset manifests itself as the device falling off of the bus and then reenumerating. If that is the case here a better solution is to register for file handle notifications and you will be told when it falls off.
d -- This posting is provided "AS IS" with no warranties, and confers no rights.

Cannot reset device via iTunes (Touch 1st gen)

I'm having serious problems with my iPod Touch 1st Gen.
When starting apps, I get back to the start screen after 2-3 sec.
Cannot sync with iTunes, nor reset device via iTunes.
Is there any way to factory restet the device, by pressing and holding buttons?
Thanks in advance,
Johnny

I don't know if your iPod 1st gen has this but my iPod 4th gen has this thing where you go to settings then general and at the bottom it says reset then click on reset all and earase everything

Lenovo Update of Synaptics UltraNav driver now makes it reset vertical scrolling speed

After the last update of the Synaptics UltraNav Driver on my W510 to 16.1.1.0 through Lenovo Update it now keeps reseting the Vertical Scrolling speed (the lines per mouse wheel to 1) randomly when pluging/unplugging a mouse or docking/undocking or rebooting the machine.
This is probably the 5th case of a Lenovo Update that regresses something on the system I've had for the past year and a half...

ttttrigg3r wrote:
I can confirm this problem. It is very annoying to have to reset mouse scroll speed 5-10 times a day because I use my dock very often. I have found no fix, whether temporary or permanent, to this problem. I am using driver version 16.1xxxx (the latest "upgrade") and am very annoyed by this problem. I hope Lenovo techs can help us.
Have You tried removing the driver and installing an older version? The one that You know worked?
T60/T618895-W4M, UXGA, T9300, 8GB RAM, Vertex3, Intel 6300 Win8.1
R61e 7649-W1Z, T7250, Intel 6300

DAQmx Reset Device hangs

I have PXI-8110 controller with 10 PXI cards in them. When I try to reset these cards using "DAQMx Reset Device.vi", code hangs. There is no way to recover from this but to cycle power on the PXI controller.
Ofcourse, this happens rarely.
I'm using LabVIEW 2009, MAX 4.6.1f0

Hi Appu,
Do you receive any error message? Are you handling the errors with a Simple or General Error Handler? Can you manually reset the devices in MAX?
Best,
Adam
Academic Product Manager
National Intruments

Resetting devices and counter states

How frequently should one make use of Reset Device? I have placed it at the start of a LabView program so that it runs every time this program is called. This is because we sometimes use Traditional DAQ applications and sometimes DAQmx. Is this necessary?
Also, I would like the counter to initialize at 0V. Now it puts out 5 V after Reset Device. I am using the NI6715 PCMCIA card. Right now, I reset the device and then ask for 2 ticks high (the minimum) and 1000 ticks low with the Idle State on Low. Then I call for Start Task and Wait Until Done to force the counter low. There are times when the counter needs to be forced high. With DAQmx, what is a good way to toggle the counter as needed? The counter is controlling a switch that sometimes needs to pulse and sometimes needs to remain in one position or the other.
Thanks,
Peg

Hello Peg,
Reset device is only necessary if the device is left in a state that
the driver will not be able to communicate. This can happen if a
previous task is not stopped/cleared and a new task is created or
sometimes when going from one driver to another (Traditional DAQ to
DAQmx or vice versa).
If you are not getting an error when you start your code, the reset is
not necessary. If you happen to get an error, you can manually reset
your device in MAX, or you can even conditionally reset the card in
your code (i.e. try to create and start your task and if an error
occurs, call the reset device function and rerun the code.
You do not need to completely run a task to set the idle state. You
can use a DAQmx Control Task function with the action set as "commit"
to make the idle state take effect. First you would configure the task
you eventually want to run on the counter, then commit it. Later when
you want the counter output pulse to run you can call the DAQmx Start
Task function. When you need to change the idle state, simply clear the
task and begin a new one in the same manner with the appropriate idle
setting. A digital line is an alternate option which can be simply
written high or low.
Hope this helps,
Jennifer O.
Applications Engineer
National Instruments

Unable to Edit Number Locked In Speed Dial Position

All my Speed Dial listings were ported over to a new 8900 from an 8300. I also changed carriers. Coincidentally, I had my old carrier's voice mail access number programmed into the "W" position in the Speed Dial list on the 8300. That number is now in the "W" position on the 8900, which is the default position for the voice mail access number on the 8900. I am unable to delete the old number so I can enter my new carrier's voice mail access number. There is no EDIT option for that position, but the EDIT option is available for all other numbers in my Speed dial list EXCEPT the position Q, which has a default feature "Change Profile to Vibrate." It would be nice to know how to delete that feature, too. Can anyone help?

There are three keys preassigned
A Lock System
Q Change to vibrate
W Voicemail
You can change this ones, but if for any reason you reset the device, the preassigned keys come back
To change this go to phone, press menu, view speed dial list, go to the A (for ex), press enter, and choose the contact you want.
Remember to create a new contact called Voicemail or something like that to change the Voicemail Key.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

ISync 'Reset Device' resetting speed dial?

Similar Messages

Maybe you are looking for