IT GRC Process Pack _ Create Risks from Library

Hi Folks, so I'm trying to figure out if MSFT provides the a Risk Library - since when we create a Program and then attempt to "Create Risks from Library" the content is empty. I've gone through the process to import the MPs to provide various
Control Libraries - but I don't see where we can include anything for the Risks. If someone can point me in the right direction that would be ideal.  Thanks!
-Norman

That new Tbird acct has no info for connecting to internet, because I currently do not have all the "account settings, server settings etc..
but yet, it did download two emails yesterday.
My local server .. Cybermesa .. will be open Monday, and I can call to get all that stuff, if necessary.

Similar Messages

  • Get the ID of a dynamically created symbol from library, INSIDE another symbol.

    Hi everyone,
    I'm trying to get the id from a dynamic created symbol from library.
    When dynamically creating the symbol directly on the stage (or composition level), there's no problem.
    But I just can't get it to work when creating the symbol inside another symbol. 
    Below some examples using both "getChildSymbols()" and "aSymbolInstances" 
    // USING "getChildSymbols()" ///////////////////////////////////////////////////////////////////////// 
    // ON THE STAGE 
    var m_item = sym.createChildSymbol("m_item","Stage");
    var symbolChildren = sym.getChildSymbols(); 
    console.log(symbolChildren[0].getSymbolElement().attr('id')); // ok eid_1391853893203
    // INSIDE ANOTHER SYMBOL
    var m_item = sym.createChildSymbol("m_item", sym.getSymbol("holder").getSymbolElement()); 
    var symbolChildren = sym.getSymbol("holder").getChildSymbols(); // Am i using this wrong maybe?
    console.log(symbolChildren.length) // returns 0 so can't get no ID either
    // USING "aSymbolInstances"" ////////////////////////////////////////////////////////////////////////// 
    // ON THE STAGE
    var m_item = sym.createChildSymbol("m_item","Stage"); 
    console.log(sym.aSymbolInstances[0]); // ok (i guess) x.fn.x.init[1] 0: div#eid_1391854141436
    // INSIDE ANOTHER SYMBOL
    var m_item = sym.createChildSymbol("m_item", sym.getSymbol("holder").getSymbolElement());
    console.log(sym.getSymbol("holder").aSymbolInstances[0]); // Javascript error in event handler! Event Type = element 
    In this post http://forums.adobe.com/message/5691824 is written: "mySym.aSymbolInstances will give you an array with all "names" when you create symbols"
    Could it be this only works on the stage/ composition level only and not inside a symbol? 
    The following methods to achieve the same are indeed possible, but i simply DON'T want to use them in this case:
    1) Storing a reference of the created symbol in an array and call it later by index.
    2) Giving the items an ID manually on creation and use document.getElementById() afterwards.
    I can't believe this isn't possible. I am probably missing something here.
    Forgive me I am a newbie using Adobe Edge!
    I really hope someone can help me out here.
    Anyway, thnx in advance people!
    Kind Regards,
    Lester.

    Hi,
    Thanks for the quick response!
    True this is also a possibility. But this method is almost the same of "Giving the items an ID manually on creation and use document.getElementById() afterwards".
    In this way (correct me if i'm wrong) you have to give it an unique ID yourself. In a (very) big project this isn't the most practical way.
    Although I know it is possible.
    Now when Edge creates a symbol dynamically on the Stage (or composition level) or inside another symbol it always gives the symbol an ID like "eid_1391853893203".
    I want to reuse this (unique) ID given by Edge after creation.
    If created on the stage directly you can get this ID very easy. Like this;
    var m_item = sym.createChildSymbol("m_item","Stage");
    var symbolChildren = sym.getChildSymbols(); 
    console.log(symbolChildren[0].getSymbolElement().attr('id')); // ok eid_1391853893203
    I want to do exactly the same when created INSIDE another symbol.
    var m_item = sym.createChildSymbol("m_item", sym.getSymbol("holder").getSymbolElement());
    Now how can I accomplish this? How can I get the Id of a dynamically created symbol INSIDE another symbol instead of created directly on the stage?
    This is what i'm after.
    Thnx in advance!

  • Integration pack to create user from template

    Does anybody know if the Orchestrator 2012 Sp1  active directory integration pack has a way to create user from a template?
    I believe there is a create user but not from a template.
    Thanks
    Lance
    Thanks Lance

    Hi Lance,
    you are right. There's no "Create User from template" or "Copy User" Activity in the Integration pack for Active Directory in System Center SP1 or R2.
    Perhaps, you can use "Get User" to get some settings from the template and subscribe the results to "Create User" Activity.
    Regards,
    Stefan
    www.sc-orchestrator.eu ,
    Blog sc-orchestrator.eu

  • Creating jobs from library jobs

    I know that jobs can be saved to the library to share with others. I wanted to know how to copy a job from the library to the normal job scheduler. Can this be done? It doesn't seem very intuitive if there is a way to do it.
    Thanks!
    Jeremy

    There is no EM supported way to do this.
    Rob

  • Process Pack for IT GRC - No Knowledge Libraries for Service Manager 2012

    Hi Folks, so I'm installing the Process Pack for IT GRC.  I'm noticing the Knowledge Importer isn't finding any libraries to populate the service.  Can I manually import these libraries into the system?  This was working before the release
    of Microsoft Security Compliance Manager v3.0.  Thanks!
    -Norman

    We finally resolved this by manually installing the libraries from the Security Compliance Manager:
    http://technet.microsoft.com/en-us/solutionaccelerators/cc835245.aspx

  • HOW TO - Create new from clipboard and process multiple files - please help

    Need help - have new version of photoshop on trial only ATM...
    Want to know - HOW TO:
    1. Create new from clipbaord
    2. Process multiple files
    Please help.

    For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
    You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
    For processing multiple files,
    File > Automate > Batch or
    File > Scripts > Image Processor...
    Check the User guide or google information for those commands if you have specific needs.
    Gene

  • Is there any API or standard process to create structure from backend

    Hi,
    Is there any standard process to create structure from backend.I want to create 300 options for a option feature from backend.
    Please let me know the API through which it can be done.
    Best Regards,
    AJ

    AJ --
    Configurator provides a "Custom Import" capability to automatically create structure. It is documented in Chapter 5 ("Populating the CZ Schema") of the Oracle Configurator Implementation Guide.
    However, setting up a custom import may actually take you more time than just creating the Options manually in Configurator Developer. If the Options need to be duplicated across several Models, it may be advantageous to build them as Items in the Configurator Developer Item Master instead, and then use Populators to automatically create corresponding Options within your Option Feature(s).
    Eogan

  • Azure Pack Websites - Create from template fails

    Hi,
    I have implemented a full production version of Azure Pack Websites, and creating blank websites works fine, but if i try to create websites from templates it doesnt work. Only error i get is "Provisioning failed" - "Unable to connect to the
    remote server"
    I thought the issue was because the servers couldn't retrieve the packages from the web Pi feed, so i create an offline feed according to this article (http://blogs.technet.com/b/privatecloud/archive/2013/11/26/off-lining-web-application-gallery-feed-for-windows-azure-pack.aspx)
    but i get the exact same error.
    I have looked at logs and troubleshooted for 3 days, i really could need some help.

    I think i can help you but first, are there any firewalls between your WAP components (Even between your browser and the WAP servers, anything)
    Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com

  • GRC Process Control Architecture

    Hi.
    I need to find a good documentation about the architecture of the GRC Process Control.
    I'm new with this technology.
    Any helps to me, please? Thanks

    Hi.
    Your link brings to Document Builder???
    I have a look about SAP BO Process Control and I have downloaded some papers.
    I'm searching a document that talks how create the first (and also simple) application with this technology.
    My goal is to understand which objects I can use to create the first application, after installing the Process Control.
    Can I insert rules and controls and/or can I import these objects from an ERP source?
    Any suggests to me, please? Thanks

  • Role of functional consultants in GRC Process Control

    Can anybody provide his/her thoughts on the role played by functional consultants (especially FI, MM) in GRC Process Control assignments/projects?

    Hi Abhijeet,
    Process Control means controls to be implemented in a given Process.
    Now what is the Process?
    Flow of activities which can be tracked one end to other. Best example:: Procure- to- Pay or Order- to- Cash.
    Procure to Pay is one process which starts with Procurement and involves MM-Purchase, and FI-AP mainly. Similarly , Order to Cash cycle starts from SD and stops at FI-AR.
    Controls in these processes has to be built at several stages,i.e., at sub-process levels. For Instance, in Procur-to-Pay , more controls are required for Vendor related Transactions.- Person allowed to create vendor should not be allowed to process the Vendor. Internal control on Duplicate Invoices . Payment maintenace of vendor like Bank details changes  in Vendor Master should be cross checked by two tier Authorisation or Composite Role method via Basis.
    Henceforth the functinal consultants has more role to identify/design/implement the controls.
    There is no readymade tool so far to guide us as to what are the Processes where we need the Controls in SAP. It calls for pure expertise in the domain and vast exposure in building the controls.
    Most of the people are embedding controls today  to Comply with various Regulations (SOX/J-SOX/COSO guidelines, etc.). Few are exercising it to avoid Frauds.
    Let me know what is <i>your</i> actual concern and where exactly you are looking for the GRC Process Controls? Is it for Audit  or for Implentation ? May be then this forum can be more helpful.
    Regards,
    Sudhanshu
    My points....
    Message was edited by:
            Sudhanshu Shekhar Tiwary

  • How do I import folders from one library to another? My original library has become to large and I want to split it. There is not enough memory to select all the folders I want to move to create a new library.

    I also created a new library and tried file-import but cannot see / access any files in the original aperture library with that command.

    If you use the Command to Export Project as New Library, then such a Library can be imported into another Library with the command to  Import Library/Project.  The first such export as New Library can be the"seed' Library for starting the process.
    But the most important point is there is no performance gain from small Libraries where you think one has become too large, if the new Library is to be on the same disk drive as the original.  My primary library is 1 TB in size, and works as well as tiny test libraries.
    Ernie

  • How to create a swatch library from multiple png files?

    Illustrator CC
    I am having a difficult time trying to create a new swatch libray of patterns from multiple png files. The way I am doing this is very slow and repetitive and seems silly for a tool as advanced as the latest CC suite including illustrator.
    What it seems I must do is open all the png files in Illustrator, creating multiple workspaces, drag one png file into the swatch window, then save that window as a library, close the existing window to reveal the next png file, open the user library I just created, drag the next image into the currently active swatch window, then drag the previous swatch/s from the user library into the current active swatch window, resave and replace the user defined swatch library (now with two images in there)fromthe updated current active swatch panel/window, close the existing workspace to reveal the next image file, and then repeat the process again, slowly building the user defined swatch library up by adding one image at a time and then adding back into the Swatch panel the previously built up library of swatches again one at at time.  (you can select all from the existing  user defined library and drag over into swatch panel, but this creates at least one  duplicate on each cycle for as soon as you click on the first swatch in the library, it adds itto the current swatch panel and then when you select all swatches to drag across it includes the first swatch and copies it again)
    This is a very slow process to build up a swatch library. For some reason you cannot drag swatches directly into  the user defined library you have created, only into the active swatch window for each workspace. I searched the web and forums  for answers but could find none. There must be an easier way,  just can't find it.
    Ideally, the best option would be a swatch window  option that allows the import directly from a list of selected files in the finder.
    Any ideas out there?

    Monika,
    Thank you for responding, however I am not exactly clear on what you mean by "libraries are plain AI files". For example, I cannot find a file with the same name as my user defined library name that I have created. I can find the preinstalled swatches listed under Adobe Application Support... Library... Swatches, but a user defined folder is not present and the library sets that I have already created are not visible. I have tried searcing my Mac for a (name).ase file and still no luck (at least for the name I was looking for). I can open the user defined library from the Swatch library icon on the bottom left of the Swatch panel, but when I open this I cannot drag and drop add new swatches directly to this library. As stated above, I have to add each pattern, one at at time to the normal swatch panel, then add back the previous ones I have saved from the user defined library to the swatch panel and then save threm all as an updated user defined library. Thus by repeating this process, it builds up the user defined library one at a time.
    I am using Illustrator CC if this makes a difference.

  • Cannot create mysites from powershell: Original XSLT List View Web Part not found

    I have a bizarre problem in my SharePoint 2013 farm. This does not occur in my test farm, only in the farm we were going to go live with.
    I'm on windows Server 2012, SQLServer 2012 SP1, SharePoint 2013 April CU. 1 appserver/centraladmin server, 2 web servers.
    When I log into our mysitehost and click newsfeed, it will create a mysite (even though first it displays "we are sorry there was a problem creating your site")
    But from powershell, whether I use $UserProfile.CreatePersonalSite() or New-SPSite, I get the following error:
    Original XSLT List View Web Part not found
    So far I've only found one other person with this:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2503e42c-e114-4e89-8e00-89fe70f0b154/cannot-create-sharepoint-mysite-programmatically
    This is a brand new farm, created with the same scripts I created my test farm with, and same version of SharePoint. Only the service accounts are different. (Farm account has admin on the servers right now since I was setting up profile service).
    Some other errors from the same correlation ID that look related:
    It can't seem to find the listemplate 101
    And something looks wrong with the MySiteDocumentLibrary feature
    I have tried the following:
    1. run psconfig.exe on each server
    2. install-spfeature -AllExistingFeatures
    3. looped through the directory under Features and for each called Install-SPFeature $dirname -Force
    4. uninstalled and reinstalled MySiteDocumentLibrary feature
    5. blew away the whole farm (removed all servers from farm, deleted all databases) and recreated it.
    6. tried creating the UPA from the CentralAdmin gui.
    The only real difference I can think of between the working farm and non working farm is, I installed the working farm using RTM, then as they came out added the March PU and April CU. For this farm I installed RTM and March and April, and then ran my build
    farm script.
    I am at a loss. What do I need to do, re-install the binaries? That's all I can think of. What I love is that our test / POC system worked fine, and now 2 weeks before go-live I'm seeing errors on the production servers I've never seen before. Using the
    same scripts no less.
    Feature Activation: Feature 'Fields' (ID: 'ca7bd552-10b1-4563-85b9-5ed1d39c962a') was activated
    Feature Activation: Feature 'CTypes' (ID: '695b6570-a48b-4a8e-8ea5-26ea7fc1d162') was activated
    No document templates uploaded for list "$Resources:core,global_onet_solutiongallery_list;" -- none found for list template "100"
    Failed to find <ListTemplate> tag corresponding to ID "101", tried both onet.xml for site definition ID "0" language "1033" and global site definition. Operation failed.
    No document templates uploaded for list "$Resources:core,stylelibraryList;" -- none found for list template "121".
    System.Runtime.InteropServices.COMException: A user may not remove his or her own account from a site collection.<nativehr>0x81020051</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPUserCollection.UpdateMembers
    Feature Activation: Feature 'MySitePersonalSite' (ID: 'f661430e-c155-438e-a7c6-c68648f1b119') was activated
    Feature Activation: Activating Feature 'MySiteDocumentLibrary'
    Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'MySiteDocumentLibrary'
    SharePoint Foundation Upgrade MySiteDocumentLibraryFeatureReceiveraj08n INFO Creating new My Documents library
    Unknown SPRequest error occurred. More information: 0x80070002
    SPRequest.GetMetadataForUrl: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://contoso/personal/cbuchholz/DOCUMENTS ,METADATAFLAGS=59
    System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPWeb.GetObjectForUrl at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.GetSPObjectFromUrl ...
    <nativehr>0x80070002</nativehr><nativestack></nativestack>There is no Web named "/personal/cbuchholz/DOCUMENTS"
    Possible mismatch between the reported error with code = 0x81070504 and message: "There is no Web named "/personal/cbuchholz/DOCUMENTS"." and the returned error with code 0x80070002.
    Attemping to add webpart id 0F6072F2-E804-4CFD-837E-BB37332B9D1C to web http://contoso/personal/cbuchholz
    Adding XsltListViewWebPart calling SPRequest::CreateListViewPart. Web part id 0F6072F2-E804-4CFD-837E-BB37332B9D1C, web http://contoso/personal/cbuchholz
    Feature receiver assembly 'Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c', class 'Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryFeatureReceiver', method 'FeatureActivated' for feature 'e9c0ff81-d821-4771-8b4c-246aa7e5e9eb' threw an exception: System.InvalidOperationException: Original XSLT List View Web Part not found at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.ReplaceListViewWebPart
    Feature Activation: Threw an exception, attempting to roll back. Feature 'MySiteDocumentLibrary'
    Exception in EnsureFeaturesActivatedAtSite: System.InvalidOperationException: Original XSLT List View Web Part not found
    Failed to activate site-collection-scoped features for template 'SPSPERS#2' in site collection 'http://contoso/personal/cbuchholz'
    Failed to apply template "SPSPERS#2" to web at URL "http://contoso/personal/cbuchholz
    I've had other problems in this farm: the bug where when you add Administrators to a Search Service via the Manage Service Applications page, it removes the SPSearchDBAdmin role from the search service process account. That one did not happen in the other farm.
    At least other people have that one and I could just use the farm admin instead (still troublng of course).

    Ok,
    Here is the problem:
    When creating a mysite from powershell or script, apparently you can ONLY do this from a wfe (or a server running Microsoft SharePoint Foundation Web Application in services on server).
    You CANNOT create mysites from script on your appserver if it is not also a Web Application Server. I confirmed the same is true in my test farm. I guess I was always running most of these scripts on the webserver.
    I searched all over and cannot find this documented anywhere.
    Who do I contact to have Microsoft document this?
    It's Thursday morning, I've been working non stop since Saturday morning so you don't have to :)

  • Error while creating transformation from DSO to InfoCube

    Hi Gurus,
       When i am creating tranformation from DSO to InfoCube getting an error,        " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is  assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value   
    '8.50 ' "
    ZAMT_PLC is created with 0CURRENCY.
    On checking we found that there is no value stored for Currency field in table level itself. Now in this case how do we avoid this error.
    I want to know why is this we need to have value for 0Currency field???
    Thanks & Regards,
    Anup

    Hello Anup,
    If you load a key figure which has a unit assigned to it,
    then for every records where the key figure has a valid value
    (value 0) the corresponding unit has to be delivered as well.
    Additionally please check note 1366474 regarding the RSTRAN 312
    error message:
    "The corrections contained in Note 1165168 are incomplete.
    Depending on the sequence during loading, the system may not issue error
    message RSTRAN 312 even though data regarding the assigned unit or
    currency "space" is incorrect."
    This means actually, that the system should have issued the RSTRAN312
    error message even before the upgrade, but for some reason this
    check found no issues in some constellations. This means furthermore
    that your system behaved incorrectly in the past, that this
    error message was not triggered if you loaded key figures without
    any unit.
    I'm sorry to tell you, but the system behaves and works as designed
    as it should be even before the correction from note 1366474.
    Please change your transformations for key figures which
    have a unit assigned, that the unit field is filled correctly.
    with the corresponding units, otherwise the system will abort
    the processing of the data with the above mentioned error
    message.
    Best Regards,
    Des

  • Error while creating activities from Account application (Activity tab page

    Hi Experts,
                       We are using CRM 5.0 with PCUI ( EP 7.0 version). We are getting  below error when try to create activities from Account application in PCUI ( from activity tab page):
    Error : Activity contains error.
    Diagnosis
    This transaction has errors.
    Procedure
    To correct the errors, go to the maintenance interface of the transaction.
    To navigate to there, use the link to the account application
    Pls suggest how to proceed with this error & helpful solutions would be rewrded generously.
    Regards,
    Basavaraj Patil

    Hi Experts,
    We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
    Diagnosis
    You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
    System Response
    The follow-up transaction is not created.
    Procedure
    Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
    Pls suggest solution for this.
    Thanks in Advance.
    Regards,
    Basavaraj Patil

Maybe you are looking for