It is possible to style an anchored frame for the right-heading page?

The result showed in the picture is fine only for left pages.
It is possible to do the inverse for the right page?  Locate the headings at the rigth side of the column?
The idea is to apply this for subheadings in 20 vols...
PS As scripting seems complicated the idea is avoid opening the anchor text menu for each entry.
Here the solution was copy-paste an preformatted inline frame anchored text an soon afterward copy-paste the subheading already present in the text]

Yes, that is right...
But custom frames ( "relative to spine" ) apparently does not work at all when is placed at the first line of a paragraph.
Inlines are effective...
Also, custom anchored frames does not accept inline settings: and inlines for this situation is the best as was detailed above (fast, and more and less easy production) and also for a crucial thing: the anchored heading must be inside the paragraph.

Similar Messages

  • How to link a text box to an anchor frame in the master pages?

    Ok, as the title states, we are trying to figure out if it is possible to link a text box to an anchor frame in the master page. When you look at our Master Page layout, we have a text box in the upper left hand corner of the left hand page, this is used for our machine serial numbers. Then we have an anchor frame that automatically fills out the figure number. Let's say I have pages 2 & 3 (left & right), they have a S/N at the top of the page for the machine, then pages 4 & 5 have a different S/N. If I have to add more pages in between pages 2 & 3 (bumping the current 4 & 5 to 6 & 7), the anchor frame bumps to the next page, but the S/N text box doesn't. Is there a way to fix it so that they both move to the next page? Thanks for the help.
    P.S. I can include images and other info if needed.

    I have included a two pictures that should help me explain.
    Master Page:
    This is the master page set up, the "Page Text Box" has the flow set to "B" while the S/N text box has the flow set to "A". This setup is for our parts manuals, the left page is usually an illustration while the right page is usually a parts list. The text box, anchored frame & paragraph tag are empty in the master page set up. The "page text box" has a flow of "B" and the "S/N text box" has a master flow of "A".
    Body Page 1:
    When we create new pages, the paragraph tag automatically fills in the figure title on the left page, then we add an anchor frame within the text box to hold the illustration. You will notice that I added in a "test" serial number at the top of the page. Now if I need to go back and add two pages before this, the anchor frame, illustration and parts list will move to a new page, but the S/N text box will not. The "Before S/N TBD" would stay on the original page.
    This is what happens, the text box containing the illustration and the parts list "bump" to the next page, but the S/N text box does not. So the question we have is there a way to link that text box to the page so when we create new pages the S/N text box moves with the illustration.
    Does this help?
    Thanks for the assistance Error7103.

  • Is there a way in an unstructered Frame11.0 file to change all anchored frames in the file to a specific size at the same time?

    Is there a way in an unstructered Frame11.0 file to change all anchored frames in the file to a specific size at the same time?

    Rog,
    This is perfect use case for ExtendScript. You could easily iterate over all anchored frames and resize them. You would probably want to resize the contents as well, though, which would add a few extra lines of code.
    Russ

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • Is it possible to have Different Interval Ranges for the same Doc Type

    Dear All,
    Here is the issue.Is it possible to have different interval ranges for the same document type according to certain condition.Like my client , wants his interval ranges  be divided according to region(which are many)
    Regards,
    Sameer Jalees

    Hello,
    As you know we can only assign one number range for External and one number range group for internal in the sales document type.
    If you want different number ranges based on the regions, then as Jignesh suggested, you need to go for an enhancement.
    Use the exit USEREXIT_NUMBER_RANGE in program MVA45AFZZ, include a Z table with region as a critera and number range group for different numbers based on the regions. Talk to the business and get more details, get the help of ABAP team for technical details.
    Regards,
    SAM

  • Not possible to determine a condition type for the price in ME49

    Hi,
    While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
    Not possible to determine a condition type for the price
    Message no. 06657
    Diagnosis
    When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
    Procedure
    Contact your system administrator.
    The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
    Utsav

    Hi Utsav,
    You can refer to the following link. it might be useful to you
    RFQ price
    Thanks
    Nisha

  • [svn:osmf:] 15581: Better coding style and some comments for the previous code submission.

    Revision: 15581
    Revision: 15581
    Author:   [email protected]
    Date:     2010-04-19 17:14:00 -0700 (Mon, 19 Apr 2010)
    Log Message:
    Better coding style and some comments for the previous code submission.
    Modified Paths:
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as

    Revision: 15581
    Revision: 15581
    Author:   [email protected]
    Date:     2010-04-19 17:14:00 -0700 (Mon, 19 Apr 2010)
    Log Message:
    Better coding style and some comments for the previous code submission.
    Modified Paths:
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as

  • HT201300 I have a early 2008 macbook pro and i need a replacement bezel frame for the screen.  Where do I find if it is a A1211?

    I have a early 2008 macbook pro and i need a replacement bezel frame for the screen.  Where do I find if it is a A1211?

    http://www.welovemacs.com

  • Paragraph style including anchored frame possible?

    Hi,
    I'm working on a new template and can't get a specific paragraph style to work correctly.
    The page layout is a 1/3 to 2/3 page column layout. The 1/3 page column is called a "Marginalia"- column in German, sorry don't know the term in English. All graphics are in the 1/3 page column, while the text belonging to it is in the 2/3 page column. I need a paragraph style that contains an anchored frame as a placeholder for future graphics in the 1/3 page column and its corresponding text in the 2/3 page column.
    I've set up the page with only one text frame which is the width of the 2/3 page. The left margin of the this text frame is the left margin of the running text. All graphics are placed to the right of it.
    Can anyone tell me if this is possible and how to best go creating such a paragraph style?
    THANKS!

    Paragraph styles don't include an anchored frame attribute. You can include an anchored frame in any paragraph (though off the top of my head I don't know a way to insert one automatically -- perhaps it would be scriptable), and you can assign an object style to the anchored frame that contains all the positioning information as well as any text styling or graphic fitting information you might want to use.

  • Best Practice for Image placement and Anchored Frames for use in Robohelp 9

    Hi,
    I'm looking for the best practices in how to layout my images in Framemaker 10 so that they translate correctly to Robohelp 9.  I currently have images inside of Anchored frames that "Run into" the right side of my text. I've adjusted the size of the anchored frame so that my text flows correctly around the image. Everything looks good in Framemaker! Yeah! The problem is that when I link my Framemaker document to Robohelp, the text does not flow around my image in the same manner. On a couple of Robohelp screens the image is running into the footer. I'm wondering if I should be using tables in Framemaker in order to get the page layout that I'm looking for. Also, I went back and forth...is this a Framemaker question or is this a Robohelp question. Any assistance would be greatly appreciated.

    I think Jeff is meaning this section of the RoboHelp forums:
    http://forums.adobe.com/community/robohelp/robohelp_framemaker

  • Finding anchor frame for broken links to graphic

    I have a document that when opening wants a new link to a graphic that has been deleted from the file. I have looked on the body pages, master pages, reference pages, everywhere I can think of to locate where the graphic the file is looking for could be located. Can anyone suggest additional places in file to look?
    Thanks

    If the file isn't part of a book, make it one, then:
    Add > List of > Figures
    and you'll find out what page it's on (if LOF catalogs missing imports, which it may not).
    You can also save as MIF and look in the MIF for the object name. You need to learn a little about MIF to decipher where that maps to in the document.
    Import references can hide in all sorts of places, including but not limited to:
    beyond edge of anchored frame (had 2 of those just today)
    hidden behind an opaque something you can see
    conditional text currently turned off
    text flowed out of sight on disconnected page
    in plain sight, but hidden by Color Views
    Worst case scenario: create a 1x1 pixel white object and give it the name of the rogue.

  • Are these things possible in PDF forms? Questions for the experts

    Hi,
    I have a project where I need to create an online application system, where the user has to fill in a form where the results have to be saved into a database.
    I wanted to create a html based form, but then someone told me PDF can also do cool things, so I’m researching that road.
    I already managed to create a simple form and submitting it to a web service (java servlet in my case) and that works pretty nicely.
    I'm new to the whole PDF form creating and I’m wondering if certain things are possible. So I’m trying the experts in this form for a yes/no answer.
    Are the following things possible with PDF forms:
    1) validation: number & date checks, eg, a number should be higher than 4, or be a valid number/date
    2) If I answer A at question 1, I should skip Question 2 and go directly to Question 3. Is it possible to hide Question 2, depending on what I answered at Question 1?
    3) Is it possible to attach files to the form, like a photo? And also upload it to the web service.
    4) After I submit the form, is it possible to lock the form so that no other changes can be made? In other words, you may only submit once.
    5) Possible to activate the print button after the form has been submitted?
    6) Can a drop-down lists be dynamic? Instead of hard coding the list, calling a web service to fill the values?
    Thanks in advance for any insight,
    Kind regards
    Ido

    Hi Paul,
    thanks for the quick answer. No my next challange is how to do things
    1) validation: number & date checks, eg, a number should be higher than 4, or be a valid number/date
    <answer> Yes
    I think this is done through the object properties
    2) If I answer A at question 1, I should skip Question 2 and go directly to Question 3. Is it possible to hide Question 2, depending on what I answered at Question 1?
    <answer> Yes
    This is done with subforms and scripting?
    3) Is it possible to attach files to the form, like a photo? And also upload it to the web service.
    <answer> PDF does support the ability to have attachments. They would be includeed as part of the PDF so you woudl have to submit the entire PDF and then extract the attachments when you get the file to the server. Note that you will require to Reader Extend the document to allow a Reader user to add the attachment. This is not a requirement if you are using Acrobat.
    Have to look into this one.
    4) After I submit the form, is it possible to lock the form so that no other changes can be made? In other words, you may only submit once.
    <answer> Yes
    Also through scripting?
    5) Possible to activate the print button after the form has been submitted?
    <answer> If you add a print button on the form then the answer is Yes. The application that houses the PDF will jhave print capabilities and that one is much more difficult to hide. You can set it up so that the form cannot be printed then return back the locked version with printing enabled but a round trip to the server is required for that.
    Print button will be fine by now, probably also done by scripting
    6) Can a drop-down lists be dynamic? Instead of hard coding the list, calling a web service to fill the values?
    <answer> Yes but the form will require LiveCycle Reader Extensions if you are using Reader. Reader Extensions is not required if you are Acrobat.
    Ahh, perhaps fixed list will be ok for version 1

  • Possible to pre-set formatting info for a set of pages in a "chapter"?

    Is there a way to pre-set all of the page width, length, padding, etc for one certain “chapter” that I am creating? Also, with this new iWeb version, is it possible to pre-set all the fonts and font sizes for certain parts of the text, like Title, Body, Picture Caption, etc?
    lorna from Southern California
    Message was edited by: Lorna from Hawaii

    Here's a possibility:
    Use iWebSites to make separate domain files for each of your sites. (More on how later). Create a new domain/site and create as with all of the pages of the theme you play to use most and manually set their sizes, and fonts, etc. to what you want . Then save the sites a "Default". In iWebSites you can easily duplicate that site file, rename it, open and use it. This would work if you plan to use the same theme. Now for the process to split a current multisite domain file into multiple domain files:
    I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
    This lets me edit several sites and only republish the one I want.
    It may be more that you want to go thru but it's a thought.
    OT

Maybe you are looking for