It's possible to have, on a column library, the relation of a document with the others ?

hello,
I have a document library. I need to permit the user to bind a document A with a document B, C, ... this relation is reciprocal. So I need to have on the item of document B the relation with the document A. the bind must be an hyperlink on a column ColBind.
And I want also to program the least posible. 
I tent some cases :
use documents set. it's bad for : a document A is bind with a document B wich is band with a document C, but A and C aren't bind together
use a column lookup multiple. it's good for : easy to enter data, the links are good for the document A / it's bad for : I don't have reprocity
on the document B; all titles needs to be differents
use a liste to save the binds. it's good for : conserve the data bind informations / it's bad for : I can't automate all the binds on a column and have the hyperlink
use a data source linking : it's bad for : I don't found how put the information on a column of the library
can you help me for chose the solution and give me starting how deploy this?
thanks
 Mitsh

Hi,
According to your post, my understanding is that you want to make different documents have the relation in a document library.
I recommend that you can follow the steps as below to create a lookup column in the current document library to implement it in your environment.
  1.  Open this document library in  your site, go to the “Library Tools”, click on the “Create Column” under the Library tab.
  2.  Create a Lookup type column named as “lookup”, set the “Get information from” option to the current document library, select the “In this column” option to “ID”, check the “Allow multiple values” option, and set the “Add a column to show
each of these additional fields” to “Title”, click on the “OK” button.
Then, you can make users to select the corresponding documents ID to lookup when they add new documents into the document library or edit these documents’ properties.
The result is shown as below:
Best Regards,
Yumi Fu

Similar Messages

  • Is it possible to have an empty column title in a configTable?

    Hi all,
    is it possible to have an empty column title within a configurable table (chtmlb:configTable)? Whenever I change the title with the config tool to empty and save the changes it seems that it doesn't take effect.
    The problem is that the column width is too less to display the whole text and I don't want to have "A..." displayed there.
    Best regards
    Ben

    Hi,
    Not possible directly but possible programatically.
    The Column titles come from the data-element description. To override this, you will need to change the data element nd its fairly simple. Create a data element similar to the std. data element domain but put your description and then in GET_M method of that attribute, use this Z data type.
    For example, suppose its searhc result Displaying addresses in a table view, then for states, you get name as "Region".
    In most of asian countires, instead of region, "state" this word is used. So if i want to disply the colum header as states and not region,
    1) i will find which is the doain of std. region field.
    2) i will create a data element with this domain but i will give different description to my data element, This description would be States
    3) In the GET_M method of that particular column attribute, i will change the type to my data element.
    an i am done.
    Thus you can create your data element with shorten and more meaningful text . I think system does not allow you to save a data element or domain w/o a description hence i doubt if blank will be possible..need to check it out.
    Hope this helps
    Thanks & Regards,
    Suchita

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • Is it possible to have two DADs that access the same database?????

    Hello,
    Is it possible to have two DADs that access the same database?
    One DAD would be password protected with Authentication mode Per Package and the other DAD would not require a password/login
    If it is possible can you also give suggestions about how to do this
    Thanks
    Doug

    I HAD THE SAME PROBLEM WITH SHARING MY LIBRARY WITH MY SON. WHAT I DID WIAS CREATED A LIBRARY FOR HIS USE ONLY. IN ITUNES CLICK--FILE--NEW PLAYLIST AND THIS SHOULD ADD AN UNTILED PLAY LIST IN YOUR SIDE BAR. CLICK ON IT AND RENAME IT. HE CAN KEEP ALL OF HIS MUSIC IN THIS LIBRARY. SELECT ALL OF HIS MUSIC FROM YOUR LIBRARY AND DRAG IT INTO HIS. ONCE THIS IS DONE YOU CAN THEN REMOVE HIS SONS FROM YOU PLAY LIST. MAKE SURE YOU ONE REMOVE IT FROM YOUR PLAY LIST AND NOT DELETE THE FILE.
    HOPE THIS HELPS
    G4   Mac OS X (10.3.9)  

  • Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?

    Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?
    I basically want to create a rule that will send an automatically crafted form e-mail to the sender when I receive an e-mail with the subject line "New Swimmer". Is this possible?

    Thank you Todd, I was able to get it to work but I do have a few more questions...
    1) When I tested this, at the top of the message, before any of the text I created, this showed up: This is a multi-part message in MIME format. --------------040406040801080102080500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
    2) After the signature line, this showed up: --------------040406040801080102080500 Content-Type: image/jpeg Content-Transfer-Encoding: base64 Content-ID: /9j/4AAQSkZJRgABAQEAYABgAAD/4QAiRXhpZgAATU0AKgAAAAgAAQESAAMAAAABAAEAAAAA AAD/2wBDAAIBAQIBAQICAgICAgICAwUDAwMDAwYEBAMFBwYHBwcGBwcICQsJCAgKCAcHCg0K CgsMDAwMBwkODw0MDgsMDAz/2wBDAQICAgMDAwYDAwYMCAcIDAwMDAwMDAwMDAwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAz/wAARCAC5ApUDASIAAhEBAxEB/8QA HwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIEAwUFBAQAAAF9AQID AAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6 Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWm p6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6/
    (It was actually much longer than that)
    Is there anyway that I can get that to go away? I obviously would prefer a nice, cleanly formatted e-mail to be sent just like I would send if I were creating it on the spot.
    Thanks,
    Evan

  • Is it possible to have Different Interval Ranges for the same Doc Type

    Dear All,
    Here is the issue.Is it possible to have different interval ranges for the same document type according to certain condition.Like my client , wants his interval ranges  be divided according to region(which are many)
    Regards,
    Sameer Jalees

    Hello,
    As you know we can only assign one number range for External and one number range group for internal in the sales document type.
    If you want different number ranges based on the regions, then as Jignesh suggested, you need to go for an enhancement.
    Use the exit USEREXIT_NUMBER_RANGE in program MVA45AFZZ, include a Z table with region as a critera and number range group for different numbers based on the regions. Talk to the business and get more details, get the help of ABAP team for technical details.
    Regards,
    SAM

  • Is it possible to have a playlist that excludes the explicit songs without doing it one by one and that keeps it updated with purchases?

    Is it possible to have a playlist that excludes the explicit songs without doing it one by one and that keeps it updated with purchases?
    I want it for the kids but my computer constantly breaks and I am fed up with going through over 1000 songs every time it does!
    Thanks for any advice (other than buy a new computer!)

    Not fully automatically, no. iTunes doesn't expose the clean/explicit status to the smart playlist system, but if you're prepared to take a few seconds to tag new purchases, say by adding the keyword Explict into the grouping field, then it will be easy to create smart playlists that exclude those tracks. I use a similar scheme to tag tracks so they they go into seperate playlists for each member of the family, E,g, a grouping of Alice/Bob will go into each of Alice's & Bob's playlists, but not Charlie's.
    tt2

  • Is it possible to have jinitiator install silently from the OAS?

    When the client tries to start our 10g forms app for the first time, they are presented with the jinitiator install screens. Is there a way to set it up so it just installs silently or does browser security prevent that from happening?
    Now I have found several posts pointing to command lines with silent install options, but how does this get set up so it runs from the OAS?
    Thanks for any info.
    Gary

    Is it possible to have multiple exchange accounts from the same server?
    Yes

  • Is it possible to have an IPAD 3D in the future?

    is it possible to have an IPAD 3D in the future?

    Welcome to the Support Communities. This article may be of interest:
    3-D iPad Head-Tracking App Now in App Store
    And "Magic 3D Easter Egg Painter" shows off the iPad's spatial 3D capability. In the following video, the iPad portion of the demo starts at 3m 42s:
    http://www.youtube.com/watch?v=VCPksJa--g4
    http://itunes.apple.com/us/app/magic-3d-easter-egg-painter/id361405258

  • Is it possible to have 2 threads running at the same time?

    Is it possible to have 2 threads running at the same time at different times eg 1 repeats every 20 miliseconds and the other 40 for example. Also could you have 2 run() methods in one script, in one file? If so how? Help soon would be appreciated. Thanks.

    Is it possible to have 2 threads running at the same
    time at different times eg 1 repeats every 20
    miliseconds and the other 40 for example. Yes.
    http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html

  • I have a mac book pro that both USB ports have stopped working one about a year ago and one recently. Is it possible to connect to another one of the other MBP's  ports with a cord that ends with a USB port?

    I have a mac book pro that both USB ports have stopped working one about a year ago and one recently. Is it possible to connect to another one of the other MBP's  ports with a cord that ends with a USB port?

    Thank you For your time and thoughts!
    I went by the Apple Store and they told me that there was a "Flat Rate" repair service for this particular part where they would replace the logic board along with the USB ports for $350. Seems like best avenue. All of this would have been moot but my wifi in the computer also doesn't work so I was using my phone as a hot spot and tethering it to the computer for Internet access when the last port quit. This left me with no internet and no printing capabilities on the computer I use for my business. Basically became a nice paperweight. lol
    They will ship it off Monday and I should have it back Thursday!
    Again, thank you!

  • HT201320 When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

    When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

    OK, I found the answer in the mail settings under the advanced button.

  • Is it possible to have multiple time machines on the same password protected network?

    is it possible to have multiple time machines on the same password protected network?  any insight would be helpful  thanks

    Youshould set one of them up to extend the wireless network. That one would not need an Ethernet connection and would allow your network to cover a broader area.

Maybe you are looking for