Item Category not Defined Error message when deleting a batch item in Deliv

Hi,
I am trying with a Intercompany transfer . So after creating Interco. Transfer we have followed with a delivery document.
Now,we would like to delete the delivery document. For your info. Del. doc is still open. We haven't gone for Goods issue or anything else.
So,we tried removing the batch line item in batchsplit tab of the delivery and then deleting the delivery document.
But we get the error message "Item catgeory Not defined". but we could see entries for Item category Determination with the particular Delivery typeItem Category Group from Material MasterItem Usage+Item Category.
Why does system throw "Item catgeory Not defined". when there are entries for particular determination available .
And this seems to be Syste
Thanks,
Dhilipan

Hello Sandy,
Thanks for ur update. But its ticked already.. We checked it.
But we still face this issue. And we are not able to replicate the same issue in QA..What cud be the reason.
But Config..seems exactly similar to Pro. and QA
Thanks,
Dhilipan

Similar Messages

TO confirmation error - item category not defined

Hi experts,
We have a HU/WM setup in our warehouse. While i try to confirm the TO i am getting an error 'item category not defined'?
I am able to confirm the TO's for other orders, this is happenning for a specific group of orders which have a different item category in delivery.
Any hints when this error will appear?
Is there any config where we assign the delivery item category with the warehose or any other setting?
Thanks,
Harish
Edited by: Harish RJ on Jan 24, 2011 7:02 AM

I suggest have a look at OSS note 1464539 - your settings in table T184L might be wrong.
Is it possible that the batch is determined via WM, during picking? If different batches have been determined for one item, it will cause batch split in your delivery - if settings in T184L are wrong, system cannot cope with it and may throw error message VL324.
(sorry for duplicate, I was slow a little bit and "Sap: IN" said the same in the meanwhile)
Edited by: Csaba Szommer on Jan 24, 2011 8:29 AM

Item category not defined in batch split in vl02n

HI GUrus,
cna anybody please helpe me with this. We have to send 3 differnt batches of parts to the vendor via returns PO. when i go to vl02n and click on batch split to send out batch A - 5 EA, Batch B - 5 ea and Batch C - 5 ea. the system is throwing eerror messages like item category not defined. please help me with this
thanks
anusha

I can't understand what are you doing...
1. You already asked this question - it was answered
2. Link is pasted in my previous message.
Please read your previous question (that was the same) - please read the answer too. That's all.

Handler not defined error message

Hello - I'm having difficulty with a custom handler I've
created. Everything works well in authoring mode, but as soon as I
try to create a projector and run it, I get a "Handler not defined"
error message. The handler is used to query an sqlite database.
Here's the code which sits in a linked cast movie script
on startmovie
set gDBInstance = new(xtra"sqlite")
on mDBQuery gSqlstring
gDBInstance.sqlite_open(the moviepath&"halloffame.db")
gQuery_fetch_data = gDBInstance.sqlite_fetch(gSqlstring)
gDBInstance.sqlite_close()
end
end startmovie
The handler is called from a frame script as below:
on enterframe
gSqlstring = "SELECT file_location FROM mediaitem NATURAL
JOIN category WHERE category = 'Equipment' ORDER BY mediaitem.name
ASC"
mDBQuery(gSqlstring)
end enterframe
I'm using Director 11 on Windows XP. I do have all of the
sqlite xtras in an xtras folder next to the executable. Any
thoughts on what I'm doing wrong??
THX!
Mike M

I ran a couple test that were interesting, but first I need
to address some bad coding practices.
miken75,
I see no reason to open and close a database with each query.
Open it at the beginning of the program and close it at the end.
You should always check for errors with every interaction
with a database, including opening it.
In your function "mDBQuery " you pass in a variable called
"gSqlstring" and assign the returned data from the query to
"gQuery_fetch_data". Neither one of these variables should be a
Global. The whole point of the function is to pass in a temporary
string and the function Returns query results. Do not use Globals
in this situation.
This is a bit nit-picky, but your function names should be
verbs - some sort of action. "mDBQuery " is a noun. Something like
queryDatabase, doQuery, fetchData, etc. would be better.
A basic re-write of your startup code would be:
global gDB
on prepareMovie
gDB = new(xtra"sqlite")
Okay = gDB.sqlite_open(the moviepath&"halloffame.db")
if Not Okay then
alert("There was an error opening the Database")
end if
end prepareMovie
on queryDB SqlString
return gDB.sqlite_fetch(SqlString)
end queryDB
on stopMovie
gDB.sqlite_close()
end stopMovie
Finally, "EnterFrame" is a really poor choice for an event
that queries a database. "EnterFrame" is used when you need to do
something many times a second, such as an animation. For a singular
event like querying a database I suggest "prepareMovie",
"startMovie", "beginSprite", "mouseDown", and "mouseUp".
I'm just trying to improve your coding practices. Better
code, means less bugs and going home early.
To your problem:
I tried a couple things. I placed some startup code and a
function in an internal cast movie script and an "enterframe"
behavior that calls the function in an external cast. I saved and
published, and the executable comes up and gives the handler not
defined error. This error is a Director thing. It has nothing to do
with your code.
If, however, you shut Director down and run the executable,
then there is no error. This fact implies that when you try to run
Director and the executable at the same time, then Director all
ready has ownership of the external cast file and the executable
therefore can not open it. Although, generally under that kind of
circumstance you get an error message indicating that the file is
in use by a different program. So, I don't know exactly what is
happening here.
I then moved the "startup" code into the external cast with
the "enterframe" script and published. No error. Director and the
executable run side by side just fine. Weird.
Hope that helps.
Randal.

Sales organization 0000 is not defined (Error Message: VF 009)

Dear All,
While creating the intercompany invoice, I am getting the following error.
Sales organization 0000 is not defined (Error Message: VF 009).
I was able to create till commercial invoice. I am not able to create "Intercompany Invoice".
Am I missed out any configuration?
So far I have completed Plant assignment and Internal customer assignement required for Intercompany billing.
Kindly suggest.
Regards,
Mullairaja

Hellow Mullairaja,
We are encountering the same problem, and my assumption is that the customer not being extended to the appropriate sales area prior to delivery creation is causing the problem. Is there an OSS note or process to resolve this issue. We have extended the customer now and the only thing I can think of to resolve is to reverse the PGI and delivery. Is there a better way to correct this? What was your solution?
Thanks,
Jordan
Edited by: Jordan Simons on Nov 23, 2010 3:17 PM

I am receiving the following error message when deleting email messages

I am a new Apple Mac user and aside from converting me from the other useless PC operating system, I am still learning my way around MAC OS X Mavericks.
I am receiving the following error message when trying to delete an email message.
The Message "XXX XXXXXX XXXX XXXX by XXXXX XXXXXXX" could not be moved to the mailbox 'Trash" - veyron007(outlook)"
The IMAP command "UID COPY" (to deleted) failed for the mailbox "INBOX" with server error : Error 9.
Please try again later.
The error message above is exactly as it appears in the error box.
Does anybody know why I am receiving this message?
Does anybody know the correct procudure for loading email accounts with (OUTLOOK, OPTUSNET, etc)
Do I use IMAP or POP3 for OUTLOOK?
I look forward to receiving a reply.
Thanks

Having SSL turned on is supposed to be a lot safer (some require it), I wouldn't want a connection without.
SSL stands for Secure Socket Layer and using it means your connection to the server is encrypted.
Especially when using wifi your connection is prone to eavesdropping, I do not use wifi.
You can set a mail program like OSX's Mail.app to keep the POP mail on the server, but IMAP is my weapon of choice.
IMAP and POP3 are protocols. Mail.app (or Mail) is a client.
For the difference between POP and IMAP, look here:
http://www.geek.com/mobile/geek-101-pop-vs-imap-1536343/

Batch split error message: Item category not defined

Hi gurus,
I'm trying to use the batch split in an inbound delivery but I get the error message of the subject of this thread while saving.
Could you bring some light here please?
Many thanks,
Marc

Issue found.

Item category not defined

Hi gurus,
My client need help to ship some parts.
He creates the delivery (VL01N)
And when we enter the batch we have an error message appearing : Item category is not defiened.
I check in the sales order and everything is ok (item category ZXXX for free charge). In the maeterial master the item category group is NORM.
Do you have any suggestions of issues which can cause such an error.
Please advice
Regards

HI patrick
Please check in the copy control VTLA at item leveL (OR-LF) of item category proposal and item category are properly mantained or not ,and are available or not ?
please check the item category assignment VOV4
but can you elaborate more patrick
Can you tell me is it a normal sales cycle OR-> LF->F2 , you are doing or any free of charge delivery or returns cycle cycle you are doing ?
Is that order a MAKE TO ORDER ?
What is the item category in sales order ?
what is the schedule line of the sales order ?
CAN you tell what exactly the problem in detail ? what you have done in sales order and what you have done in delivery ?
plz let me know patrick
waiting for your reply
Regards
Srianth
Edited by: sri nath on Apr 9, 2008 7:41 PM

Error message when deleting Business transaction: Activity in CRM

Hi All,
I am trying to delete a couple of Activities from CRM (Production system) and encounter two error message: "Enter a Business Partner" and "Administration header not found."
I have tried three ways to delete/archive the activity numbers in the system:
1) Using T code: CRMD_ORDER and then while in change mode - trying to delete the activities. When I tried this I get a warning message: "Enter a Business Partner" after I hit enter the warning: "Administration header not found." comes up and then takes you to the Easy access Menu after hitting enter.
2) I used T code SE38 to open program: "CRM_Order_Delete", here I entered the activity #s that I want to delete, the Activity Transaction type, select check box "Parallel" and then execute. I see a job log which says "Number of archived records = 3", the log shows that no records were deleted.
3) I have also tried archiving using T code SARA. But this also didn't seem to work. Here, I entered the Archiving object: CRM ACTON, then click on Preprocessing. I created a variant with the transaction type and activity numbers then set the start time to immediate and executed (F8) it. Even then I was not able to archive these activities. I did set the activities to status Complete.
Am I missing something? Appreciate your help.
Regards,
Ramesh
Edited by: Ramesh Nallabelli on Oct 9, 2008 9:55 AM

Received response from SAP support partner:
Please verify first if the issue is caused by badi implementation
of ORDER_SAVE badi. Please check method prepare and check_before_save.
Maybe inside your implementation the function crm_order_read is called
but that is not possible in case of deleting a document as document is
not available anymore.
If that doesn't work try this one:
Please check to see if you have a badi ORDER_SAVE method
CHANGE_BEFORE_UPDATE. Please deactiviate the ORDER_SAVE Badi and retestthe deletion.
This is how we resovled our issue - hope this helps someone else:
Check using T Code: SE80 to look for a BADI implementation which used BADI: ORDER_SAVE:
SE80-> Package: Z* (look for custom packages) -> Look under enhancements for any BADI Implementations which have used ORDER_SAVE (double click implementation and in the right pane look under Definition name).
Click 'Change' and deactivate this implementaiton. Now try to delete the CRM transaction. The error msg should not pop up now. Once deletion is completed reactivate this implementation.
This is just a work around. The problem lies in the code and the code within the implementation should be debugged and fixed so that this error message does not come up again.

Error message when deleting downloaded video on No...

Hi,
I have recently bought a Nokia 6730i and have tried to upgrade the Ovi Maps but do not have enough internal memory. I have therefore tried to delete videos downloaded from the internet.
I have successfully managed this apart from one last file which when I try to delete I get the error message "General: Already In Use".
Please help

Received response from SAP support partner:
Please verify first if the issue is caused by badi implementation
of ORDER_SAVE badi. Please check method prepare and check_before_save.
Maybe inside your implementation the function crm_order_read is called
but that is not possible in case of deleting a document as document is
not available anymore.
If that doesn't work try this one:
Please check to see if you have a badi ORDER_SAVE method
CHANGE_BEFORE_UPDATE. Please deactiviate the ORDER_SAVE Badi and retestthe deletion.
This is how we resovled our issue - hope this helps someone else:
Check using T Code: SE80 to look for a BADI implementation which used BADI: ORDER_SAVE:
SE80-> Package: Z* (look for custom packages) -> Look under enhancements for any BADI Implementations which have used ORDER_SAVE (double click implementation and in the right pane look under Definition name).
Click 'Change' and deactivate this implementaiton. Now try to delete the CRM transaction. The error msg should not pop up now. Once deletion is completed reactivate this implementation.
This is just a work around. The problem lies in the code and the code within the implementation should be debugged and fixed so that this error message does not come up again.

Error message when deleting emails

When I get regular emails from friends and try to delete them after reading, I get the following error message. "The message " what ever the subject is" could not be moved to mailbox trash- Compte POP.
The operation couldn't be complete, file already exist.
The email remains in my Inbox but in the trash, the sender and subject is also there. When I open the trashed email, it is advertising.
I can delete the same email again from the inbox, but never deletes and this keeps doubling up in the trash, with more advertising.
Can someone guide me through to fix this problem.
Thanks
yvon
[email protected]

I am having a similar problem-here is the message i get, but the same thin happens as does to CBXSudbury:
/Users/jonathan/Desktop/ErrorMessage.png

"Entitlements are not valid" error message when trying to sync ipa file from iTunes to iPad

Is anyone else getting this error message, "Entitlements are not valid", when trying to sync .ipa file from iTunes to iPad?
The issue I'm having is getting the ipa file that was built by the 'Adobe Flash Packager for Iphone' installed into my iPad.
So, I have a swf file that works and was able to publish it into the Android Market. I then compiled and build the same flash project with the Packager for Iphone into an .ipa file. But when I try and install this .ipa file into my iPad to do my testings, i'm getting the error message.
I would like to test my ipa file in my iPad device before submitting it to the Apple Store.
Any help would be appreciated. thank you.

Developing for iphone can be amazingly complicated and frustrating. (even before you start coding). The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious.
I solved the problem of the "Entitlements are not valid". The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings. (ie. com.yourdomainname.yourappname). After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad.
I wish the error message had been a little more descriptive. Could have saved me a whole day.
I hope this helps others. But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

Error message when trying to add item in change BOM goup

Hi I went to transaction cs05,and trying to add item to specific material with BOM group,an error message popped up and saying assign the item to an alternative,what does it mean? How to solve?

Hi,
A finished material can have multiple alternative BOMS which can be stored in a common BOM group number. CS05 is used to change these multiple boms.
When you add a new item in CS05, system will ask - to which alternative bom the new item should be assigned and that's how you are getting this message. For example, if in a bom group you have 3 differnet alternatvie boms for a FG material, when you add new item in CS05, you will see 3 checkbox at the right hand side of the screen. If you want to assign new item to all the three alternative BOMs , than select all the three check box and save.
Regards,
Ravi Thakkar.

Fix for "Not Connected" Error Messages When Trying to Access Web Services

If you run across an error message on your printer stating that it is "Not Connected" when trying to access ePrint or your Apps, but you know it is connected to the internet, it probably just means that the printer is not connecting to the server properly.
Here is the first set of steps I would try, since they seem to resolve this issue half of the time.
The first thing I would try in this situation is a network reboot.
First, disconnect the power cord from the back of your router.
Next disconnect the power cord from either the back of the printer or the wall, without powering it off first.
Wait about 30 seconds and reconnect the power cord to your router.
Wait about another 30 seconds and plug the printer back in. It should boot back up automatically, but if it doesn't go ahead and press the power button.
Once everything is back up and running, try to access ePrint or your Apps.
If those steps don't work for you, the next thing would be setting a Static IP & DNS for the printer. Before doing this, you want to print off a network configuration page. It varies from model to model, but it is usually found under the Wireless Settings or under Reports in the Setup menu. After you have that page, follow these steps.
Before we start, we need a network configuration page with your current connection settings. To get this, press the wireless button on the front of your printer and then press "Print Info" or "Print Report". This will print off a network configuration page, which has information on it that we need to complete the next few steps.
After you have that, we will need to access the printers Embedded Web Server (EWS). You can do so by entering the printers IP address (from the network configuration page) into your browsers address bar and pressing enter.
Once there, press the "Network" tab at the top of the page. From there you will want to click the "IPv4" button, located on the lef-hand side of the page. It will be there for WIreless and Wired, so make sure to click the one for you however you are connected. If you do not see "IPv4", you should see "Networking", press that and then press "Network Address(IP)".
Next, you will want to click the small round button next to "Manual IP Address" and then fill in the boxes for IP Address, Subnet Mask, and Default Gateway, using the information found on the network configuration page.
For the Primary or Preffered DNS Server, you will want to enter 8.8.8.8.
For the Secondary or Alternate DNS Server, you will want to enter 8.8.4.4.
Click apply and when the message pops up saying that the changes have been applied, press "OK".
Press the power button on your printer, wait for it to fully power off and then press it again to power it back on.
After doing this, go ahead and try to enable ePrint again.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.

The reason we recommend using 8.8.8.8 and 8.8.4.4 for the DNS server is because they work when ISP assigned DNS servers do not. The DNS server assigned to you by your ISP is not able to resolve the domain for web services, therefore not allowing the printer to connect.
I assure you that it is with your ISP's DNS server and not the printer. If you were to take the printer back to the store and get a replacement, you would have the same issue, unless you changed the DNS. Same goes for any of our web service enabled printers.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Project not connected error message, when trying to Generate DDL on NWDS

Hello,
I created EJB project with Java Persistence Facets.
2 Entities created in the EJB to Generate as Data base table on the Java dictionary project.
The connection works OK (I can ping to the JD project).
But when I tried to Generate DDL and build the table structure on the JD project I received the error message: EJB project not connected.
Has someone came across this issue?
Thanks for the help.
Nir

Thanks for the reply.
SAP NetWeaver Developer Studio version:
SAP NetWeaver 7.2 SP03 PAT0017
Thanks
Nir

Item Category not Defined Error message when deleting a batch item in Deliv

Similar Messages

Maybe you are looking for