Item Text in Purchase Requisition

Hi Guys,
I need to keep track of the changes in the Item Texts of a PR. Unfortunately when I view the item changes the values are blank. Any idea where I can look this up? I have tried also viewing table CDPOS but the new and old values field are also blank.
Many thanks!
Ian

Hi w1n,
Do you know the table and field of the item text for the config to work?
Thanks!

Similar Messages

  • Required item texts in purchase requisitions

    Hi all,
    When I create a purchase requisition, I need to set some of the texts as required.
    I think, with customizing it's not possible. Is there any user exit for that?
    Can anyone help me?
    Thanks,
    Luis Cruz

    Procedure 1
    Go to SPRO--> MM>Purchasing ->Purchase requisition> Define screen lay out at document level----->
    Here make "Text" Field is required entry from relevent field selection group which is assigned to PR Doc .type
    Procedure 2:
    SPRO--> MM>Purchasing ->Purchase requisition->Text for Purchase Requisitions>Define Copying rules--
    >Select Relevent text type(Your required) and click on text likage then select the Fix indicator as 'N"
    Then this text not to copied to further docs like PO,RFQ,OLA

  • Sales order item text to purchase requisition

    Hello Team,
    we have scenario in which we create the sales order and while creating the sales order we put the production memo text at the item level under text tab in it.
    We have define copying rules for the production memo text under PR customizing text types to get it copied from the sales order. But when we are creating the PR for the sales order then the production memo text is not flowing into the purchase requisition.
    I checked some OSS notes and found recently released note 448814 which says that text does not gets copied to PR when PR is created manually from the sales order ( question no 24 and 25 in the note ) due to technical reasons and it gets copied only when the PR gets created directly from the sales order.
    Could you please help me to know if this is standard problem or some other settings exists and if anyone have other solution to it. ?
    Thanks and Regards,
    Deepak Gupta

    Hi Jurgen,
    Thanks for the reply. I was expecting to know if others have came across similar kind of issue and after following up with SAP, if they have provided some other solution.
    Thanks
    Deepak

  • Creating structured texts for purchase requisitions

    Hello,
    I would like to know if it's possible to define structured texts for purchase requisitions. By example, the item text would be like this :
    Building :
    Room :
    and the user should only complete the missing information.
    Does anybody have an idea on how to realize this ?
    Thanks in advance.

    Hi,
    It is not a simple thing to do.
    The item text comes from the material master (if you are using one) and so you could easily have the text for that as "Building   Room" and the material text can be changed (if you configure the system correctly) so they could just add the information.
    But you are limited to the size of the material text and so many people just use a non-material approach and manually key in the information in the text options rather than the Item text on the requisition line on the main screen. But in this case it is not a standard option to preformat the text as you require.
    It is almost as if configurable materials may help, these use the classification function and so they have characteristics, it would be easy enough to have a characteristic for room and one for building. The user would then be prompted to enter just the values for each and so it would do exactly what you need.
    But I don't have enough detailed experience of configurable materials to know for sure that you could use them like this, perhaps someone who knows them well could confirm if this would work?
    Whatever happens it is not a simple standard option, but SAP is very flexible and so there may be a reasonable work-around option.
    Steve B

  • No selectable items exist for purchase requisition l_banfn

    Hi,
    While creating PO with ref to PR getting the below error :
    no selectable items exist for purchase requisition l'banf .
    Checked if the PO is created, its not created,.
    checked if the item is blocked/cancelled/deleted. Nothing is set.
    PR looks fine. Dont know if any authorization data is missing?

    Check the status tab in ME53N whether all the qty in PR are already used up
    Or
    Check the line item in PR whether it is deleted
    Edited by: Karthik on Jul 20, 2011 12:37 PM

  • Item text in Purchase Order getting updated with info. record Purchase Order Text

    Hello All,
    I am working in a roll out project and facing issue in text repeating twice for the line item in the Purchase Order for the new company code for which rollout is happening
    Issue:
    Item text in Purchase Order getting updated with info. record Purchase Order Text
    01) PO Text is maintained in the material master under "Purchase Order Text" tab
    02) The PO text that is maintained in material master is getting updated in the Purchase Info. Record
    03) When Purchase Order is created, the "Item Text" gets updated in the Purchase Order automatically only for the new company code for which rollout is happening. when printed, this results in the text getting duplicated twice
    03.1) this behavior is not observed in the Plants/ Company code that is already Live
    Configurations in the system:
    The copying rules for the "Texts for Purchase Orders" is
    Source Object = "Info Record", Source Text="Purchase Order Text", Fix="*"
    We have modified the Purchase Order form to print one of  the condition types maintained for calculating the tax. Other than this there is no change to the plants that are already live.
    I could not locate any "Purchase Organization" / "Company Code" / "Plant specific configuration.
    Am I missing any configuration or where can I look in what is causing this error.
    Request help from the experts in the forum.
    with Regards,
    Dhandapani R

    There is no company/purchasing/plant specific customizing for purchase order text.
    The customizing copying rules for the "Texts for Purchase Orders" affects all equally .
    If the text in the purchase order in ME23N is already filled different to other plants, then you either have a modification in place, or the texts are differently maintained in the referenced data (vendor, material, info record, contract)

  • How 2 Copy Header & Line Item Text from Purchase Order 2 Out Bound Delivery

    Hi SD Gurus,
    I want to copy header and line item text from Purchase Order to Out Bound Delivery (This is required in Stock Transfer Process).
    I have been able to do successful config. for copying header and line item text from Sales Order to Outbound Delivery but config. doesn't seems to be same for copying text from PO to OBD.
    Is there any way to achieve the same? Can some expert show the way to achieve this.
    Thanks in advance.
    Warm regards,
    Rahul Mishra

    Hi Ravikumar thanks for u quick reply.
    This is wht is currently coded.
    concatenate values to get item text for read text function
       invar3+0(10) = invar1. "PO number
       invar3+10(5) = invar2. "PO line number
       SELECT SINGLE * FROM stxh WHERE tdobject = 'EKPO'
                                   AND tdname   = invar3
                                   AND tdid     = 'F01'
                                   AND tdspras  = sy-langu.
       IF sy-subrc = 0.
         invar4 = invar3.
    reading the text for the document items.
         CALL FUNCTION 'READ_TEXT'
           EXPORTING
             id       = 'F01'
             language = sy-langu
             name     = invar4
             object   = 'EKPO'
           TABLES
             lines    = it_itab.
    I have seen some PO's which have info rec texts in that, which gets pulled by the above code...first thing is its id is F02 which exist in STXH table also there is other text with F01 id, and hence the table it_itab gets both these text hence no pbm.
    but i came across a PO which has only one text which is info rec text with id F05 and is not store in stxh and hence doesnot get pulled by read_text fm. How do i change my cod to get this text which should not hamper other PO's as well.
    As mentioned in above msgs, this F05 could be retrieved by providing object name as EINE.
    anyhelp will be appreciated and rewarded.
    thanks

  • Transaction to Mass Update Header and Item text in Purchase Order

    Dear All
    Whether any Transaction in SAP to mass update the Header and Item text in Purchase Order.
    One Single Text For Ex :" This is a Dummy PO" .
    This text needs to be updated in large number of POs.
    Please let me know your views
    Reg
    Shyam

    Hi Shyam,
    You can make use of BAPI_PO_CHANGE for this. See the documentation of this BAPI in SE37 for more information.
    "You can transfer header and item texts in the PoTextHeader and PoTextItem tables. You import texts
    for services in the PoServicesText table. Texts can only be replaced complete."
    Regards,
    Purnima.

  • Item text in Purchase request is not copied to Purchase orders.why?

    que1:Item text in Purchase request is not copied to Purchase orders.why?
    que.2:where this item text is get stored, i mean to ask which table.
    please reply asp.
    SAP Learner.

    hi
    >que1:Item text in Purchase request is not copied to Purchase orders.why?
    spro >mm>Purchase Order>Texts for Purchase Orders>Define copying rules for item(line item) texts.
    spro >mm>Purchase Order>Texts for Purchase Orders> Define copying rules for header text.
    >que.2:where this item text is get stored, i mean to ask which table.
    use function module  READ_TEXT and table STXL
    regards
    KI

  • "No selectable item exist for purchase requisition I_Banfn"

    Dear all
    While creating Po system show a massage"no selectable item exist for purchase requisition I_Banfn"
    Please help.

    Hi,
    PR status in status TAB in item details  You have following:
    Processing status :Specifies the current processing status of the purchase requisition: IS PO Created or RFQ created etc...
    Block ID:The requester (PR creator)can block a requisition item to prevent it from being converted to a purchase order
    Processing State: Released or not Released
    You need check above & then act to unblock if blocked , release it if it is not released  or check if this PR already converted to PO.
    Follow the steps to create PO from PR:
    Enter ME21N T.Code
    Click u201CDocument Overview onu201D
    Click u201CSelection Variantu201D and Select Purchase requisition and double click & Execute
    Now  you will PR Numbers,Select your PR Number , you will have line items(10,20,30 etc..) , you will have all the details of PR (like item category,material , quanitites for each line items) and Now click u201CAdoptu201D and u will see all PR related copy to PO.
    Regards,
    Biju K

  • Commitment Item Change in Purchase Requisition

    Hi All ,
    I want to change the commitment Item in the Purchase Requisition at the change of Material Group in the PR .
    I tried all the Exits and BADI but its not working  .
    Can any body suggest some  , how to do this ???
    Thanks n Regards
    Manik L Dhakate

    Hi,
    check this BADI is working or not..
    ME_COMMITMNT_PARKING                    BAdI for Redefining Commitment Interface When Parking
    Arunima

  • Text in Purchase Requisition

    Dear All,
    Here we are using MRP (type PD) to generated Purchase Requisitions.
    Text mentioned in the reservation is not displayed after requisitions released through MRP.
    Is there any way to display text in Purchase Requisition?
    Please let me know.
    Amit

    Dear,
    thanks a lot.
    but if u can find out any way out please let me know.
    Amit

  • Item text for Purchase order

    Hi All,
      I Wants to pick the item text for Purchase Order. in my prog i already picked the header text by Read_text FM .i wants to used the same FM for item pickup . Can you please tell the FM parameter Value, so that i can pick proper Item text value.
    <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
    Thanks in advance
    Moni
    Edited by: Alvaro Tejada Galindo on Sep 1, 2008 5:09 PM

    Hi Moni
    We can use the same procedure to retrieve texts of any document, just that the Name, Object and ID varies.
    To find the required parameters for each object and document do as below:
    1. Open an existing document
    2. Go to the required Text
    3. Double click on the same
    4. It takes you to the editor screen.
    5. Now use menupath: Goto->Header
    6. In the popup screen you will find the required paramters.
    For item texts the Name will be (PO Number + Item Number).
    Using the details, you can pass the same to FM: READ_TEXT and retreive the texts in programs.
    Regards
    Eswar

  • Report for Material PO Text in purchase requisition

    Hi Team,
        In Purchase requisition user maintains specifications in Material PO Text in item details-TEXT tab.
    User wants a report which can pull this text against a PR Item No.
      Anybody knowa a way to do this
    Rajesh

    Hi,
    Kindly Take the help of an ABAPEr it is not stored directly in table we need to use a function module LEAD_TEXT.
    Regards
    Nambi

  • How to get the  special symbols in item description in purchase requisition

    hi,
      My client requiremnt is when i write some special character like(u221E,u03B2) in ms-word and copy the text & paste in purchase requisition screen in item description field ,the special character appear has Square box(instead of u221E,u03B2).
    kindly  guide me how to solve the issue.
    Thanks
    Muthuraman.D

    Speak to the Basis guys, you need the necessary code pages (I think they're called). I'm still not sure if you can copy and paste from Word but the Basis guys may know.  Depends on standards used by SAP v MS (SAP tend to be good at following standards).
    You also need to consider the knock on effect on programs e.g. reports that output text may need conversion to work with special characters.
    It's not a quick fix type job.
    Regards,
    Nick

Maybe you are looking for