Item wise document Approval

Hi
Is it possible to have Item Level approval on GRN.
My client wants his GR PO to get approved by different person for different person.
For e.g.
GR PO one contains items
Item A - to be approved by Mr. x
Item B - to be approved by Mr. y
Item C - to be approved by Mr. z
Note that this is a single document
Regards
Indrajit

Hi Indrajit,
B1 does not support approval queries on document lines. you can query only document header.
you can either try to workaround it with all sorts of aggregate UDFs in the header, or alternatively take a look at:
[http://www.beonesolutions.com/ip/Solutions/ap.html|http://www.beonesolutions.com/ip/Solutions/ap.html]
all details, including the ability to query all document tables, are in:
[http://www.beonesolutions.com/files/Approval_Pro_Brochure.pdf|http://www.beonesolutions.com/files/Approval_Pro_Brochure.pdf]
Gilan

Similar Messages

  • Item wise Invoice cancellation in case of same IR document

    MM Guru’s,
    I have an issue for one of my PO, when I look at Purchase order in PO history tab page by selecting chronolg.order and observed that initially GR was posted for qty – 1 (as same as PO qty&price) with price - 11.941.000 and material document created successfully.
    Later IR was posted by user for amount - 11.491.000 and IR document created - successfully.
    Based on my analysis I understand that the IR posted by user amount - 11.491.000 has been entered wrongly while posting invoice hence there is a difference of amount which I can able to view in PO history tab page.
    Since the PO has two line items and for item 2 IR is posted by user correctly only for item 1 user posted with wrong amount.
    When I cancel the invoice document in MR8M both the items in IR are getting canceled.
    My requirement is I need to cancel IR item wise.
    Please let me know is there any transaction I can able to cancel the IR item wise.
    I look forward to your valuable input.
    Regards,
    Kumar.S

    Jurgen,
    We have a separate accounts team specifically for posting invoices.
    In this case IR has been posted by user manually in T code MIRO.
    We have also case where IR posted via Workflow/EDI/Batchjob..
    Yes as u said rightly it was a typo while entering invoice.
    I have given the same solution but wanted to know if we have item wise IR cancellation in standard SAP.
    Regards,
    Kumar .S

  • RV document posting line item wise in FBL5N tcode

    Dear Experts,
    I had posetd the Invoice to accounts with 3 line items. While checking the FBL5N report the Rv doument no is displaying 3 items i.e. repective line item wise prices are displayed. But my requirement is  i want to check the doument wise i.e. all line items rolling up to singlke price. How to achied this.
    Regards
    abhi

    Hi Lakshmi,
    We are using ECC 6.0 Version i am unable to find the path as per your reply wherein  Perform Document Summarization for Sales and Distribution is available in PERIODIC PROCESSING> Integration> SD. But what settings needs to be done when i check the Perform Document Summarization for Sales and Distribution system is asking for Ref Transaction and when i check Billing document header it is in display mode with New Entries required.
    My requirement is  i am posting a Invoice with 2 line items ( service related Billing). Please find the below report in FBL5N
    6700147    6700147    RV  22.07.2009 22.07.2009          123.00
    6700147    6700147    RV  22.07.2009 22.07.2009          222.00.
    But the accounting document  No is same. i need one  A/c No 67000147 and the total amount has 345.
    Regards
    jayanth

  • RV document type psoting line item wise...

    Hi experts,
    My requirement is i am posting a Invoice with 2 line items ( service related Billing) from SD module with doc type RV. i am getting the  report in FBL5N
    6700147 6700147 RV 22.07.2009 22.07.2009 123.00
    6700147 6700147 RV 22.07.2009 22.07.2009 222.00.
    But my requirement is in the FBL5n report i must not get line item wise report i need to get consolodated report i.e. document no 6700147 and amount 345.
    Kinldy help me out how to configure the same .
    Regards
    Abhi

    Hi Praveen,
    i can do the subtotaling by applying a new layout.... but this is not agreed by the client  this was shown to client already but in the layout i can see two line items and sigma of total two line items. This client doesnt want .  Anyother alternative to show the report in document no and clubbing of amout for total line items as show in my 1st thread.
    Regards
    abhi

  • Identifying tax item wise in accounting document

    Hi,
    If an accounting Document is having two line items and tax is caluculated on a whole then how can we
    identify how much tax is caluculated item wise
    Thanks,
    K.Kiran.

    Check these tables.
    BSET
    BSEC
    BSEG.

  • Pur req line item wise block

    Hi Gurus,
    Is there a way to achieve this specific scenario. Let us say we have five line items on the Pur req.We have setup our approval system in such a way that if the dollar amount is $1000 or more then only the release startegy kicks off. Below 1000 there is no release strategy. So now out of the 5 lines lets say we have the first four line items less than 1000 and the fifth line item is $2000. we want to put a block on the PR so that unless the 5th line item gets approved, the remaining 4 line items which are less than 1000 should not be converted to a PO. How can this be achieved?
    Thanks
    ANusha

    hi,
    > Make settings for charatceristics in such a way that the total value should not be greater or equal to 1000$...Now when you set up this, system will auto check the PR doc...and as the avg. for all item will be imbalanced due to one line item, it'll not release the whole PR doc...
    > But if you wanna check per item wise and even then don't wanna release the other items, then give the auorisation to the special person who can check the document for all item and when ok then will release it...
    > Its not possible directly...
    Regards
    Priyanka.P

  • PO (Line Items wise) Payment Status Report

    Hi Friends,
    Is it possible to get a PO (Line Items wise) Payment Status Report.
    My client wants PO Line wise payment status as a MM report development.
    We have Down Payment, Residual & Retention money as a business practise with our vendors
    Following is the MM-FI flow in our company code..
    Create & Release PR u2013 MM - Creating PR
    Create & Release PO (ME21N) u2013 MM u2013 Creating PO
    F-47 Down Payment Request u2013 MM u2013 Creating DPR
    F-48 Post Vendor Down Payment u2013 FI - Posting DPR
    FBZ5 Print Check for Payment Document u2013 FI - For printing cheques for DP only
    MIGO/ML81N, GR u2013 MM u2013 SES/GR for PO
    MIR7/MIR6 IR - MM/FI u2013 Parking & IR
    F-44 Clear Vendor u2013 Linking advance with IR (as residual clearing)
    F-53/F-58 u2013 Posting Payments after deducting Retention
    F-04 Post with Clearing u2013 Clearing Outgoing account entries with Main account
    Thanks in advance.
    Regards,
    Vikrant Sood

    as per my knowledge you can configue a new Z table or prepare a Query using EKPO table you will your desired result.
    regards,
    Ninad Kshirsagar

  • Goods Receipt Value line item wise

    Hi Experts,
    My client wants show Goods Receipt Value line item wise at the time of GR entries.
    He wants show GR Value before saving the GR document.
    Please advise me how it is possible.
    Thanks in advance,
    Chandhu

    and what will be the benefit of such request? do you think a receiver (warehouse personell) can valuate whether the Po price is correct maintained by a buyer?
    Maybe it is better to create check reports for the buyers instead.
    you can certainly check in a user exit if price is far away from the price maintained in material master and can issue a warning or even an error.

  • Line item wise billing

    Hi All,
    Can we do sale order related billing for individual line item wise and quantity wise?
    If this is for delivery related billing then the setting will be in item category, billing relevance as K. But what will be the settings for order related billing?
    Kumar

    Hi,
    In two ways you can achieve your requirement.
    1.Goto the T.Code VF01
    Enter your sales order number.Donot press Enter.
    Click on "Selection list".
    Select your items.Click on Copy.
    Save the invoice.In "VOV7" T.Code maintain the billing relevance as "C".
    2.Goto the T.Code "VA02".
    Double click on the item.Goto Billing document tab.
    Maintain the billing block under "Billing" tab.
    Save.
    Goto the T.Code "VF01".Enter your order number.
    Create the billing document.
    Next Goto VA02 and remove the another block.
    Create the invoice.
    Regards,
    Krishna.

  • Query for Item wise sales report

    Hi Guys,
    Below is the query i have used to run Sales Register.
    But we need Item wise sales register  and those Excise Duty calculations are needed for item wise instead of total document wise. Pls update the query ...
    SELECT M.DocNum AS 'Inv.No ', M.DocDate as 'Date', M.CardName as 'Customer Name',L.Dscription,L.Quantity,L.Price,
    (Select Sum(LineTotal) FROM INV1 L Where L.DocEntry=M.DocEntry) as 'Base Amt.(Rs.)',
    (SELECT Avg(TaxRate) FROM INV4 where statype=1 and DocEntry=M.DocEntry) as ' VAT % ',
    (SELECT Sum(TaxSum) FROM INV4 where statype=1 and DocEntry=M.DocEntry) as ' VAT (Rs.) ',
    (SELECT Avg(TaxRate) FROM INV4 where statype=4 and DocEntry=M.DocEntry) as ' CST % ',
    (SELECT Sum(TaxSum) FROM INV4 where statype=4 and DocEntry=M.DocEntry) as ' CST (Rs.) ',
    (SELECT Avg(TaxRate) FROM INV4 where statype=7 and DocEntry=M.DocEntry) as ' TAXEXEMPT % ',
    (SELECT Sum(TaxSum) FROM INV4 where statype=7 and DocEntry=M.DocEntry) as ' TAXEXEMPT ',
    (SELECT Avg(TaxRate) FROM INV4 where statype=8 and DocEntry=M.DocEntry) as ' VAT% ',
    (SELECT Sum(TaxSum) FROM INV4 where statype=8 and DocEntry=M.DocEntry) as 'VAT12.5 ',
    (SELECT Avg(TaxRate) FROM INV4 where statype=9 and DocEntry=M.DocEntry) as ' CST 2% ',
    (SELECT Sum(TaxSum) FROM INV4 where statype=9 and DocEntry=M.DocEntry) as ' CST @2 ',
    (SELECT Avg(TaxRate) FROM INV4 where statype=11 and DocEntry=M.DocEntry) as ' CENVCST % ',
    (SELECT Sum(TaxSum) FROM INV4 where statype=11 and DocEntry=M.DocEntry) as ' CENVCST ',
    (SELECT Avg(TaxRate) FROM INV4 where statype=-90 and DocEntry=M.DocEntry) as ' BED % ',
    (SELECT Sum(TaxSum) FROM INV4 where statype=-90 and DocEntry=M.DocEntry) as ' BED ',
    (SELECT Avg(TaxRate) FROM INV4 where statype=-60 and DocEntry=M.DocEntry) as ' Cess% ',
    (SELECT Sum(TaxSum) FROM INV4 where statype=-60 and DocEntry=M.DocEntry) as ' Cess ',
    (SELECT Avg(TaxRate) FROM INV4 where statype=-55 and DocEntry=M.DocEntry) as ' HCess % ',
    (SELECT Sum(TaxSum) FROM INV4 where statype=-55 and DocEntry=M.DocEntry) as ' Hcess ', L.LineTotal as 'Row Total (Rs.)',M.DocTotal as 'Doc Total'
    FROM OINV M LEFT OUTER JOIN INV1 L on L.DocEntry=M.DocEntry LEFT OUTER JOIN INV4 T on T.DocEntry=L.DocEntry and L.LineNum=T.LineNum LEFT OUTER JOIN INV5 J ON M.DocEntry = J.AbsEntry LEFT OUTER JOIN INV3 Q ON M.DocEntry = Q.DocEntry
    WHERE (M.DocDate >= '[%0]' AND M.DocDate <= '[%1]') AND TargetType ! = 14
    GROUP BY M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,L.Dscription,L.Quantity,L.Price,L.LineTotal,M.DocTotal
    ORDER BY M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,L.Dscription,L.Quantity,L.Price,L.LineTotal,M.DocTotal

    Hi experts..
    Pls   Update the Query

  • Duplicate item wise release pur requisitions

    Experts,
    We have item wise release procedure with classification set up for requistions.   We have begun work on new projects where leaders have received special delegation for releasing.  Is it possible to duplicate the release procedure for these leaders with special authorization for releasing so we can keep project approval separate from ongoing operations.
    Best regards,
    Diane

    Hi Diane
                  Maybe you can define a new release code for this users (adding this to the strategies of the project) and then asign this code to a new role. So this user will have two release code, one for the on going operation and one for the project operation.
    Hope It helps
    Regards
    Enzo

  • Line item wise exchange rate in sales order and same in billing

    Hi,
    The client requirement is that to have  different exchange rate at line item level in sales order, for multiple sales order, we have different exchange rate in the line items wise,  we do the collective billing through VF04.  System is picking in the billing document, but not in the accounting document.
    The accounting entry should be posted separate exchange rate wise.  How to map the same.
    Can anyone throw light on this issue.?
    Regards,
    Satya

    Go through this thread
    Difference in Billing Exchange rate(VBRP-KURSK) w.r.t OB08
    G. Lakshmipathi

  • Creating a Simple document Approval workflow in SPD

    Hi
    Having configured workflow manager 1.0 I  have attempted to create the simplest approval workflow.
    on my document library I set content approval , content type management and versioning. I have  left out check in and checkout to speed up my testing
    Create a single stage workflowin SPD2013 associated with my Document Library
     I upload my document set the various properties as defined in my custom content type
    Document "Approval Status" states "Draft"
    I (optionally) checkin and Publish a major version of the document, "Approval Status" is "Pending"
    I manually trigger the my w/f setting myself as the approver
    I want  pass my Task Outcome to the Approval Status property in my current item - I am just not sure how to do this without setting the item back to draft 
    I am just not sure of the syntax - could anyone help?
    Daniel

    Now if I was building a SharePoint 2010 workflow .... I seem to have richer support for content approval
    .......  Was there beauty contest for the 2010 actions!!!!!!!!
    Freelance consultant

  • Line item wise exchange rate differences in GR

    Dear All,
    Client does one GR in USD as document currency on a particular date and posted the transaction, while making the conversion to local currency INR system calculating the total line item values correctly as per the exchange rate maintained in the table but when we calculating line item wise amounts, it showing differences to the maintained rate.When i checked for the material master, price control maintained as V. Is tht when doing GR system recaluclating the values in material master and if it so how this much differences showing for each line items...
    Pls guide me on this issue...
    Regards,
    Balaji.c

    Dear All,
    Anybody can guide me on this issue, awaiting for ur reply at earliest...
    Regards,
    Balaji.c

  • 11I - PO DOCUMENT APPROVAL MANAGER FAIL 시의 기능 개선 사항.

    제품 : MFG_PO
    작성날짜 : 2004-11-29
    11I - PO DOCUMENT APPROVAL MANAGER FAIL 시의 기능 개선 사항.
    ====================================================
    PURPOSE
    PO Document Approval Manager Fail 시의 기능 개선 사항에 대한 검토.
    Explanation
    PO 를 승인하였으나 Status 가 In-Processs 인 경우가 발생할 수있다. 이런
    경우는 보통 PO Document Approval Manager 가 정지되었거나, Workflow 에서
    Error 가 발생한 경우가 일반적이다.
    이런 경우의 처리 방법은 Workflow Sysadmin 권한으로 Login 하여 Retry 하거
    나, wfretry.sql 을 수행하여 문제가 발생한 workflow 의 진행을 재시도 하
    게 된다.
    Procurement Family Pack F 에서는 이같은 재시도를 자동으로 수행하는 기능
    이 추가되었으며 아래의 방법으로 설정할 수있다.
    1) How to Implement This New Feature:
    - Apply 11i.PRC_PF.F (Procurement Family Pack F) AND one-off
    patch 1942091
    - Procurement Family Packs G and higher
    2) Technical Details:
    a) Dodument manager 에 관련된 Error 를 처리하기 위하여 새로운
    Purchasing Item Type 인 "POERROR" 이 추가되었다.
    POERROR item type 에 대하여 아래의 workflow attribute 가 define 되었
    으며 이 값들을 설정하여야 한다.
    관련 Attribute 들은 아래와 같으며 Business 환경에 맞게 적절한 값으로
    설정한다.
    DOC_MGR_WAIT_RELATIVE_TIME Length of time, in minutes, processes
    will have to wait before getting picked
    again.
    Default = 0
    RETRY_COUNT Number of attempts to get document
    manager for approval.
    Default = 0
    TIMEOUT_VALUE Length of time, in minutes, for
    notification automatically close itself.
    Default = 0
    SYSADMIN_USER_NAME Application user (typically the System
    Administrator) who can receive
    notifications for document manager-
    related errors in status 1 and 2.
    YOU MUST DEFINE THIS MANUALLY TO A VALID
    USERNAME.
    b) POERROR item type 에 대하여 Workflow Background Processor 가 주기적으
    로 수행되어야 한다.
    document manager 에 대한 재시도 횟수는 아래의 요소에 의해 결정된다.
    - Attribute DOC_MGR_WAIT_RELATIVE_TIME
    - WorkFlow Background engine wait period
    c) Approval mode 와 관계없이 POERROR 를 처리할 Workflow Background
    process 가 수행되어야 하며, wait time 후에 해당 process를 재시도하게
    된다. Background engine 이 start 되면 document approve 를 다시 시도하
    게된다. User 는 status 1 와 2 errors 에 대해서는 Notification 을 받
    지 않으며, status 3 error 는 User 에게 Notification 을 보내게 된다.
    (Sysadmin 에게 발송되지 않음.)
    Example
    Reference Documents
    Note 160713.1 - Improved Document Error Handling Provided in
    Procurement Family Pack F Quick Reference

Maybe you are looking for